chroots all over the place, so there is bound to be a stale file lying
around in there (in my case samba lock files from creating accounts). If
we don't do that, the symlink later will fail.
Initially in_matrote() in_clsroute() in their current state was introduced by
r4105 20 years ago. Instead of deleting inactive routes immediately, we kept them
in route table, setting RTPRF_OURS flag and some expire time. After that, either
GC came or RTPRF_OURS got removed on first-packet. It was a good solution
in that days (and probably another decade after that) to keep TCP metrics.
However, after moving metrics to TCP hostcache in r122922, most of in_rmx
functionality became unused. It might had been used for flushing icmp-originated
routes before rte mutexes/refcounting, but I'm not sure about that.
So it looks like this is nearly impossible to make GC do its work nowadays:
in_rtkill() ignores non-RTPRF_OURS routes.
route can only become RTPRF_OURS after dropping last reference via rtfree()
which calls in_clsroute(), which, it turn, ignores UP and non-RTF_DYNAMIC routes.
Dynamic routes can still be installed via received redirect, but they
have default lifetime (no specific rt_expire) and no one has another trie walker
to call RTFREE() on them.
So, the changelist:
* remove custom rnh_match / rnh_close matching function.
* remove all GC functions
* partially revert r256695 (proto3 is no more used inside kernel,
it is not possible to use rt_expire from user point of view, proto3 support
is not complete)
* Finish r241884 (similar to this commit) and remove remaining IPv6 parts
MFC after: 1 month
have chosen different (and more traditional) stateless/statuful
NAT64 as translation mechanism. Last non-trivial commits to both
faith(4) and faithd(8) happened more than 12 years ago, so I assume
it is time to drop RFC3142 in FreeBSD.
No objections from: net@
pjdfstest execution is opt-in and must be done as root due to some of the
assumptions made by the test suite and lack of error checking in the non-root
case
A description of how to execute pjdfstest with kyua is provided in
share/pjdfstest/README
Phabric: D824 (an earlier prototype patch)
MFC after: 1 month
Relnotes: yes
Sponsored by: EMC / Isilon Storage Division
While I'm there also correct typos in OptionalObsoleteFiles and add
information of the command line options for hv_kvp_daemon(8).
Reported by: jmg [1]
Reviewed by: jmg
MFC after: 2 weeks
- Handle the output from newer versions of openssl md5, similar to what
pjd@ did in r248304
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
gperf is used as a build tool for g++ and is not needed for Clang
architectures. Ports and third-party software that need it can use the
up-to-date devel/gperf port.
PR: 194103 (exp-run)
Reviewed by: bapt
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D886
a running event each time it executes a callout function. The event
includes the function pointer, argument, and whether or not it was run from
hardware interrupt context. The callwheel is marked idle when each handler
completes. This effectively logs the duration of each callout routine in
the graph.
- Remove tools/regression/pjdfstest
- Add upgrade directions for contrib/pjdfstest
- Add a note to UPDATING for the move (the reachover Makefiles are coming
soon)
Functional differences:
- ftruncate testcases are added from upstream (github)
Non-functional differences:
- The copyright for the project has been updated to 2012
- pjd's contact information has been updated
Discussed with: -testing, jmmv, pjd
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This is cleaner and eliminates the unneeded startup of KVP daemon on
systems that do not run as a Hyper-V guest.
Submitted by: hrs
X-MFC-with: 271493, 271688, 271699
many thanks for their continued support of FreeBSD.
While I'm there, also implement a new build knob, WITHOUT_HYPERV to
disable building and installing of the HyperV utilities when necessary.
The HyperV utilities are only built for i386 and amd64 targets.
This is a stable/10 candidate for inclusion with 10.1-RELEASE.
Submitted by: Wei Hu <weh microsoft com>
MFC after: 1 week
merge(1), which is part of the RCS package, it must not be installed if
WITHOUT_RCS update is set. Otherwise, it will produce confusing errors.
CR: https://reviews.freebsd.org/D691
MFC after: 1 week
Sponsored by: Spectra Logic
This mutes warnings with clang
Approved by: rpaulo (mentor)
Reviewed by: das, kargl (both as part of a larger patch)
Phabric: D742
Sponsored by: EMC / Isilon Storage Division
CPUs in a system. The tool queries the kernel for its set of CPUs
and compares TSC values on each of the additional CPUs to the first
CPU in turn. It then outputs a table of simple statistics.
awkdiff is the script from scottl that he got from ken a long time
ago... It no longer lives in his home dir, so give it a new home...
This does simple massaging of p4 output to create a useful diff...
The script p4diffbranch will create a diff that includes new and
deleted files unlike the normal diff2 -b command... So will be useful
for extracting patches from p4... It does take a changeset that will
be used to diff against...
conversions have been detected and fixed.
It is now possible to add options after the encoding in the parameter
list for convert-keymap.pl. This is currently used to selectively
enable interpretation of the ISO8859-1 currency symbol as the Euro
sign found in ISO5589-15, or to add a Yen symbol in place of '\' for
specific Japanese keyboards. The option are appended to the parameter
list, as in e.g. "convert-keymap.pl german.iso.kbd ISO5589-1 EURO".
The options are appended to the encoding in the form "+EURO" or "+YEN"
in KBDFILES.map, to keep the meaning of the columns intact.
MFC after: 3 days
1. 50+% of NO_PIE use is fixed by adding -fPIC to INTERNALLIB and other
build-only utility libraries.
2. Another 40% is fixed by generating _pic.a variants of various libraries.
3. Some of the NO_PIE use is a bit absurd as it is disabling PIE (and ASLR)
where it never would work anyhow, such as csu or loader. This suggests
there may be better ways of adding support to the tree. Many of these
cases can be fixed such that -fPIE will work but there is really no
reason to have it in those cases.
4. Some of the uses are working around hacks done to some Makefiles that are
really building libraries but have been using bsd.prog.mk because the code
is cleaner. Had they been using bsd.lib.mk then NO_PIE would not have
been needed.
We likely do want to enable PIE by default (opt-out) for non-tree consumers
(such as ports). For in-tree though we probably want to only enable PIE
(opt-in) for common attack targets such as remote service daemons and setuid
utilities. This is also a great performance compromise since ASLR is expected
to reduce performance. As such it does not make sense to enable it in all
utilities such as ls(1) that have little benefit to having it enabled.
Reported by: kib
dependent encoding) to NEWCONS (Unicode).
The file "LANG.map" is used to convert INDEX.keymaps. It has 3 columns:
- the language ID as used in the source file
- the language ID to be used in the generated file (e.g. "iw" -> "he")
- the encoding of the menu texts for this language
The conversion result is written to STDOUT.
The file "KBDFILES.map" is used to batch convert keymap files. It's
columns are:
- the encoding used for the keymap sounce file
- the name of the source file
- the name of the generated file
The output files are created in the TEMP sub-directory of the vt keymap
directory, in order to preserve (possibly uncommitted) keymap files in
/usr/src/share/vt/keymaps.
The convert-keymap.pl script can be directly executed by passing the
source file name and the encoding on the command line. It writes to
STDOUT and generates hex Unicode codepoints by default. (This can be
changed to decimal in the script.)
While written for the one-time conversion of the SYSCONS keymaps into
the format required for NEWCONS, I think these tools may be useful for
easy conversion of possible further SYSCONS keymap files, that have not
been committed to the source tree.
Mostly bugfixes or features developed in the past 6 months,
so this is a 10.1 candidate.
Basically no user API changes (some bugfixes in sys/net/netmap_user.h).
In detail:
1. netmap support for virtio-net, including in netmap mode.
Under bhyve and with a netmap backend [2] we reach over 1Mpps
with standard APIs (e.g. libpcap), and 5-8 Mpps in netmap mode.
2. (kernel) add support for multiple memory allocators, so we can
better partition physical and virtual interfaces giving access
to separate users. The most visible effect is one additional
argument to the various kernel functions to compute buffer
addresses. All netmap-supported drivers are affected, but changes
are mechanical and trivial
3. (kernel) simplify the prototype for *txsync() and *rxsync()
driver methods. All netmap drivers affected, changes mostly mechanical.
4. add support for netmap-monitor ports. Think of it as a mirroring
port on a physical switch: a netmap monitor port replicates traffic
present on the main port. Restrictions apply. Drive carefully.
5. if_lem.c: support for various paravirtualization features,
experimental and disabled by default.
Most of these are described in our ANCS'13 paper [1].
Paravirtualized support in netmap mode is new, and beats the
numbers in the paper by a large factor (under qemu-kvm,
we measured gues-host throughput up to 10-12 Mpps).
A lot of refactoring and additional documentation in the files
in sys/dev/netmap, but apart from #2 and #3 above, almost nothing
of this stuff is visible to other kernel parts.
Example programs in tools/tools/netmap have been updated with bugfixes
and to support more of the existing features.
This is meant to go into 10.1 so we plan an MFC before the Aug.22 deadline.
A lot of this code has been contributed by my colleagues at UNIPI,
including Giuseppe Lettieri, Vincenzo Maffione, Stefano Garzarella.
MFC after: 3 days.
Remove the .t wrappers
Rename all of the TAP test applications from test-<test> to
<test>_test to match the convention described in the TestSuite
wiki page
humanize_number_test.c:
- Fix -Wformat warnings with counter variables
- Fix minor style(9) issues:
-- Header sorting
-- Variable declaration alignment/sorting in main(..)
-- Fit the lines in <80 columns
- Fix an off by one index error in the testcase output [*]
- Remove unnecessary `extern char * optarg;` (this is already provided by
unistd.h)
Phabric: D555
Approved by: jmmv (mentor)
MFC after: 2 weeks
Obtained from: EMC / Isilon Storage Division [*]
Submitted by: Casey Peel <cpeel@isilon.com> [*]
Sponsored by: EMC / Isilon Storage Division
The new code uses a "test discovery mechanism" to determine
what tests are available for execution
The test shell can be specified via:
kyua test -v test_suites.FreeBSD.bin.sh.test_shell=/path/to/test/sh
Sponsored by: EMC / Isilon Storage Division
Approved by: jmmv (mentor)
Reviewed by: jilles (maintainer)
submitted via r268811
- Install the Kyuafile by adding FILES to FILESGROUPS
- Run the testcases with an unprivileged user
Some of the testcases depend upon behavior that's broken when
run as root on FreeBSD because of how permissions are treated
with access(2) vs eaccess(2), open(2), etc
- Simplify the test driver to just inspect the exit code from
run_test because it now exits with 0 if successful and exits
with !0 if unsuccessful
- Don't do ad hoc temporary directory creation/deletion; let Kyua
handle that
- Add entries for files removed in r268811 to
OptionalObsoleteFiles.inc
PR: 191020
X-MFC with: r268811
Approved by: jmmv (mentor)
Reviewed by: bapt
Sponsored by: EMC / Isilon Storage Division
* Add AR9287 and AR9331 chipset support - it just uses the AR5416 support
for now so some of the register mappings are wrong, but it works well
enough.
* don't call exit() from opmark().
Rename all of the TAP test applications from <test> to <test>_test
to match the convention described in the TestSuite wiki page
Phabric: D538
Approved by: jmmv (mentor)
Sponsored by: EMC / Isilon Storage Division
- Make sure the tests go into the right directory. The location was
wrong so they were overwriting the bin/chown tests!
- Use the right naming scheme for the test program.
- Remove the svn:executable property from the shell script.
variants. This allows usable file system images (i.e. those with both a
shell and an editor) to be created with only one copy of the curses library.
Exp-run: antoine
PR: 189842
Discussed with: bapt
Sponsored by: DARPA, AFRL
This is a redo of r267424, which was reverted in r267432 because it broke
"make buildworld" from FreeBSD 9.x. This issue has been resolved and this
change is still "make tinderbox" clean.
At least one test doesn't work yet without gcc, however gcc is
not always available in base. Using the environment compiler
is more trustable and will also work with an external compiler.
Reviewed by: markj
MFC after: 3 days
statically linked into consumers (GDB and variants) in the base
system, and the shared library is no longer installed.
That also allows ports to be able to use a modern version of readline
PR: 162948
Reviewed by: emaste
The test locale1.0 depends on locale support; it is meaningless without a
working LC_MESSAGES.
I added an OptionalObsoleteFiles.inc entry.
PR: 181151
Submitted by: Garrett Cooper (original version)
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
use dedicated kernel files with some local settings
use mkimg for ISO building
put images into separate directory and rename them for better consistency
The _SUPPORT knobs have a consistent meaning which differs from the
behaviour controlled by this knob. As the knob is opt-out and has not
appeared in a release the impact should be low.
Suggested by: imp, wblock
MFC after: 1 week
* Add special case handling where normal conversion would not work
(some APIs have special names)
* Fix conversion for function calls involving ifnet
Submitted by: Sreekanth Rupavatharam <rupavath@juniper.net>
Obtained from: Juniper Networks, Inc.
This was never intended to be off by default but was done this way
because the initial patches broke the build. Things seem stable now
(have been so for a while too) and "make tinderbox" is clean so let's
try again.
Announced in freebsd-current; all reported shortcomings have been
addressed.
vtfontcvt is useful for end users to convert arbitrary bitmap fonts
for use by vt(4). It can also be used as a build tool, allowing us
to keep the source font data in the src tree rather than uuencoded
binaries.
Reviewed by: ray, wblock (D183)
Sponsored by: The FreeBSD Foundation
Perform an O(n) deduplication pass over the bold maps at the end, rather
than walking the normal map list to look for a duplicate glyph each time
a bold mapping entry is added.
Sponsored by: The FreeBSD Foundation
This is currently an opt-in build flag. Once ASLR support is ready and stable
it should changed to opt-out and be enabled by default along with ASLR.
Each application Makefile uses opt-out to ensure that ASLR will be enabled by
default in new directories when the system is compiled with PIE/ASLR. [2]
Mark known build failures as NO_PIE for now.
The only known runtime failure was rtld.
[1] http://www.bsdcan.org/2014/schedule/events/452.en.html
Submitted by: Shawn Webb <lattera@gmail.com>
Discussed between: des@ and Shawn Webb [2]
In r266650, we made libatf-c and libatf-c++ private libraries so that no
components outside of the source tree could unintendedly depend on them.
This change does the same for the "atf-sh library" by moving the atf-sh
interpreter from its public location in /usr/bin/ to the private location
in /usr/libexec/. Our build system will ensure that our own test programs
use the right binary, but users won't be able to depend on atf-sh by
"mistake".
Committing this now to ride the UPDATING notice added with r267172 today.
The libatf-* major version numbers in FreeBSD were one version ahead of
upstream because, when atf was first imported into FreeBSD, the upstream
numbers were not respected. This is just confusing and bound to cause
problems down the road.
Fix this by taking advantage of the fact that libatf-* are now private
and that atf is not yet built by default. However, and unfortunately, a
clean build is needed for tests to continue working once "make
delete-old-libs" has been run; hence the note in UPDATING.
The GNU Unifont .hex format is a text file. Each line represents one
glyph and consists of a four-digit hex code point, a colon, and pairs of
hex digits representing the bitmap. By default an 8x16 font is assumed,
with 16x16 double-width glyphs, resulting in either 32 or 64 hex digits
for the bitmap.
Our version of the file format supports comments at the top of the file
to set the height and width:
# Height: <decimal height>
# Width: <decimal width>
Each row of bitmap data is rounded up to byte width - for example, a
10-pixel wide font uses 4 characters per row.
See http://czyborra.com/unifont/ for more background on the original
format.
Sponsored by: The FreeBSD Foundation
Walking a linked list of all glyphs to look for a duplicate is very slow
for large fonts (e.g., for CJK character sets). In my test the runtime
for a sample 40000 character font went from just over 80 seconds on
average to just over 2 seconds.
Sponsored by: The FreeBSD Foundation
The description of WITH/WITHOUT tweaks should only document the non-default
option. TESTS still defaults to no, so the option to be documented is
WITH_TESTS.
to use the procedural interface.
Submitted by: Sreekanth Rupavatharam <rupavath@juniper.net>
Reviewed by: glebius@
Obtained from: Juniper Networks, Inc.
Update the manpage to reflect this change.
- Always set the current position to the first null-byte when opening in append
mode. This makes the implementation compatible with glibc's. Update the test
suite.
Reported by: pho
Approved by: cognet
We should not be leaking these interfaces to the outside world given
that it's much easier for third-party components to use the devel/atf
package from ports.
As a side-effect, we can also drop the ATF pkgconfig and aclocal files
from the base system. Nothing in the base system needs these, and it
was quite ugly to have to get them installed only so that a few ports
could build. The offending ports have been fixed to depend on
devel/atf explicitly.
Reviewed by: bapt
the configuration can reference additional files relative to its own
location.
(NANO_MODULES): If set to "default", install all built modules.
Reviewed by: imp
MFC after: 1 week
install it as fmake. This defaults to no. This should be viewed as the
first step towards evental migration of this historic code to ports
and removal from the tree.
to bus_space(9) and that uses the proto(4) driver for talking to
hardware. If the I/O resource is a memory mapped I/O resource,
then mmap(2) will be attempted to avoid read(2)/write(2) overhead.
Sponsored by: Juniper Networks, Inc.
option. Convert all other uses to MK_CTF=no. Set MK_CTF=no rather than
the indirect WITHOUT_CDDL in filemon regression. It is expected that
NO_CTF will be removed in FreeBSD 12 entirely.
An execute-only fd (opened with O_EXEC) allows neither read() nor write()
and is therefore incompatible with all stdio modes. Therefore, the [EINVAL]
error applies.
Also adjust the similar check in freopen() with a NULL path, even though
this checks an fd which is already from a FILE.
building clang and/or gcc as the bootstrap compiler. Normally, the
default compiler is used. WITH_CLANG_BOOTSTRAP and/or
WITH_GCC_BOOTSTRAP will enable building these compilers as part
bootstrap phase. WITH/WITHOUT_CLANG_IS_CC controls which compiler is
used by default for the bootstrap phase, as well as which compiler is
installed as cc. buildworld now successfully completes building the
cross compiler with WITHOUT_CLANG=t and WITHOUT_GCC=t and produces a
built system with neither of these included.
Similarlly, MK_BINUTILS_BOOTSTRAP controls whether binutils is built
during this phase.
WITHOUT_CROSS_COMPILER will now force MK_BINUTILS_BOOTSTRAP=no,
MK_CLANG_BOOTSTRAP=no and MK_GCC_BOOTSTRAP=no.
BOOTSTRAP_COMPILER was considered, but rejected, since pc98 needs both
clang and gcc to bootstrap still. It should be revisisted in the
future if this requirement goes away. Values should be gcc, clang or
none. It could also be a list.
The odd interaction with Xfoo cross/external tools needs work, but
is beyond the scope of this change as well.
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
issues with vendors that needed 7.x support have been resolved. Many
vendors are still using 8.x build platforms, however, so bumping this
up to 9.0 will have to wait until that is resolved. Actual support for
building from 8.x still relies on those vendors fixing bugs that are
present as most developers have moved onto 9.x or newer platforms.
Reviewed by: marcel@
Interestingly, the pkill tool lives in bin, not usr.bin. Haven't bothered
to check if this is because the tool moved or because the tests were
originally added in the wrong place.
Note that these tests are for fmake, not bmake, and thus they are not
installed nor run when bmake is selected (the default). Yes, I have
wasted a *ton* of time on moving tests for no real reason other than
ensuring they are not left behind.
But maybe, just maybe, it was not work in vain: the majority of these
tests also work with bmake and the few that don't may point at broken
stuff. For example, the tests for the "archive" feature do not work
with bmake, but bmake's manpage and source tree seem to imply that they
should. So... to be investigated later; need to poke sjg@.
I'm starting with the easy cases. The leftovers need to be looked at a
bit more closely.
Note that this change _does_ modify the code of the old tests. This is
required in order to allow the code to locate the data files in the
source directory instead of the current directory, because Kyua
automatically changes the latter to a temporary directory.
Also note that at least one test is known to be broken here. Actually,
the test is not really broken: it's marked as a TODO but unfortunately
Kyua's TAP parser currently does not understand that. Will have to be
fixed separately.
This change was originally going to only migrate the usr.sbin tests but, as
it turns out, the usr.sbin/sa/ tests require files from usr.bin/lastcomm/
so it's better to just also migrate the latter at the same time. The other
usr.bin tests will be moved separately.
To make these tests work within the test suite, some of them have required
changes to prevent modifying the source directory and instead just rely on
the current directory for file manipulation.
/cfg updated with the modified configuration files in /etc. I have
written an improved version with the following features:
* Recurses directories.
* Only requires file arguments the first time the file/directory is
* added to /cfg.
* Handles file deletions.
PR: 145962, 157533
Submitted by: Aragon Gouveia and Alex Bakhtin
AppleTalk was a network transport protocol for Apple Macintosh devices
in 80s and then 90s. Starting with Mac OS X in 2000 the AppleTalk was
a legacy protocol and primary networking protocol is TCP/IP. The last
Mac OS X release to support AppleTalk happened in 2009. The same year
routing equipment vendors (namely Cisco) end their support.
Thus, AppleTalk won't be supported in FreeBSD 11.0-RELEASE.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
interface, in the r241616 a crutch was provided. It didn't work well, and
finally we decided that it is time to break ABI and simply make if_baudrate
a 64-bit value. Meanwhile, the entire struct if_data was reviewed.
o Remove the if_baudrate_pf crutch.
o Make all fields of struct if_data fixed machine independent size. The
notion of data (packet counters, etc) are by no means MD. And it is a
bug that on amd64 we've got a 64-bit counters, while on i386 32-bit,
which at modern speeds overflow within a second.
This also removes quite a lot of COMPAT_FREEBSD32 code.
o Give 16 bit for the ifi_datalen field. This field was provided to
make future changes to if_data less ABI breaking. Unfortunately the
8 bit size of it had effectively limited sizeof if_data to 256 bytes.
o Give 32 bits to ifi_mtu and ifi_metric.
o Give 64 bits to the rest of fields, since they are counters.
__FreeBSD_version bumped.
Discussed with: emax
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
This function is not public and brooks (initial committer adding the code)
suggests the deletion of the tests (which I don't know if they work)
instead of changing the visibility of the function.
Just replace the simple calls to the library with ad-hoc code. We should
later rewrite these with the ATF libraries anyway, which are part of the
base system.
Tests that cannot be run because a precondition is not met should be
marked as skipped, not failed. Do this for the tests in mdconfig that
first check if the caller user is root.
Small divergences in the output padding made some sa tests fail. Just
trim all whitespace from the outputs and the golden files so comparisons
are less fragile and the tests pass again.
Because bmake is the default make being built, many of the tests here
fail due to differences between the two. Just skip the tests for now
when using fmake.
This fixes a pgrep test that assumed that PID 2 was named g_event. This
does not seem to be the case any longer (and I don't know if it ever was
in all possible setups).
Change this test to use the idle loop instead and determine its expected
PID using ps without assuming any specific ID.
First, change the driver to run the installed yacc instead of the one from
/usr/obj (which might not be there), just as we (intend to) do with all
other tests.
Second, regenerate the expected output files from scratch. Based on visual
inspection, the differences seem OK. But this highlights that the tests in
here are too fragile and, possibly, useless: we should be testing the
behavior of the generated program, not the literal output. Something to be
addressed later.
This isn't entirely correct (as the device may not necc. be called wlan*) but
this will be further worked into a combined ath, iwn, wlan, etc. tool.
Discussed with: jhb, adrian
This just extracts the current statistics out from the NIC via
the new ioctl API and displays them. It runs every 100ms to hopefully
grab the latest statistics.
I may eventually teach this to use libstatfoo like what has been done
for athstats and such; but this is good enough for now for people to
do some basic investigation.
Tested:
* Intel Centrino 6205
It is a small and lightweight Mail Transport Agent.
It accepts mails from locally installed Mail User Agents (MUA) and delivers the
mails either locally or to a remote destination. Remote delivery includes
several features like TLS/SSL support, SMTP authentication and NULLCLIENT.
Make dma conditional to new WITHOUT_DMA option and make it respect WITHOUT_MAIL
Reviewed by: peter
Discussed with: emaste, bz, peter
all of the features in the current working draft of the upcoming C++
standard, provisionally named C++1y.
The code generator's performance is greatly increased, and the loop
auto-vectorizer is now enabled at -Os and -O2 in addition to -O3. The
PowerPC backend has made several major improvements to code generation
quality and compile time, and the X86, SPARC, ARM32, Aarch64 and SystemZ
backends have all seen major feature work.
Release notes for llvm and clang can be found here:
<http://llvm.org/releases/3.4/docs/ReleaseNotes.html>
<http://llvm.org/releases/3.4/tools/clang/docs/ReleaseNotes.html>
MFC after: 1 month
- netmap pipes, providing bidirectional blocking I/O while moving
100+ Mpps between processes using shared memory channels
(no mistake: over one hundred million. But mind you, i said
*moving* not *processing*);
- kqueue support (BHyVe needs it);
- improved user library. Just the interface name lets you select a NIC,
host port, VALE switch port, netmap pipe, and individual queues.
The upcoming netmap-enabled libpcap will use this feature.
- optional extra buffers associated to netmap ports, for applications
that need to buffer data yet don't want to make copies.
- segmentation offloading for the VALE switch, useful between VMs.
and a number of bug fixes and performance improvements.
My colleagues Giuseppe Lettieri and Vincenzo Maffione did a substantial
amount of work on these features so we owe them a big thanks.
There are some external repositories that can be of interest:
https://code.google.com/p/netmap
our public repository for netmap/VALE code, including
linux versions and other stuff that does not belong here,
such as python bindings.
https://code.google.com/p/netmap-libpcap
a clone of the libpcap repository with netmap support.
With this any libpcap client has access to most netmap
feature with no recompilation. E.g. tcpdump can filter
packets at 10-15 Mpps.
https://code.google.com/p/netmap-ipfw
a userspace version of ipfw+dummynet which uses netmap
to send/receive packets. Speed is up in the 7-10 Mpps
range per core for simple rulesets.
Both netmap-libpcap and netmap-ipfw will be merged upstream at some
point, but while this happens it is useful to have access to them.
And yes, this code will be merged soon. It is infinitely better
than the version currently in 10 and 9.
MFC after: 3 days
Experimental version released on February 7th, 2014.
This is the first release without the code for the deprecated tools. If
you require such code, please fetch a copy of the 0.19 release and extract
the 'tools' directory for your own consumption.
* Removed the deprecated tools. This includes atf-config, atf-report,
atf-run and atf-version.
Experimental version released on February 7th, 2014.
This is the last release to bundle the code for the deprecated tools.
The next release will drop their code and will stop worrying about
backwards compatibility between the ATF libraries and what the old tools
may or may not support.
If you still require the old tools for some reason, grab a copy of the
'tools' directory now. The code in this directory is standalone and
does not depend on any internal details of atf-c++ any longer.
* Various fixes and improvements to support running as part of the FreeBSD
test suite.
* Project hosting moved from Google Code (as a subproject of Kyua) to
GitHub (as a first-class project). The main reason for the change is
the suppression of binary downloads in Google Code on Jan 15th, 2014.
See https://github.com/jmmv/atf/
* Removed builtin help from atf-sh(1) and atf-check(1) for simplicity
reasons. In other words, their -h option is gone.
* Moved the code of the deprecated tools into a 'tools' directory and
completely decoupled their code from the internals of atf-c++. The
reason for this is to painlessly allow a third-party to maintain a
copy of these tools after we delete them because upcoming changes to
atf-c++ would break the stale tools.
commit 6b569451b92c48ccf1768da32e7e89189e1aa253
Author: Brooks Davis <brooks@one-eyed-alien.net>
Date: Mon Jan 27 22:50:46 2014 +0000
Always install nmtree as mtree.
For compability, link mtree to nmtree.
X-MFC after: never
Sponsored by: DARPA, AFRL
were a little broken and not automatable, with unix_seqpacket_test.
It's coverage is a superset of the old tests and it uses ATF. It
includes test cases for bugs kern/185813 and kern/185812.
PR: kern/185812
PR: kern/185813
Sponsored by: Spectra Logic
MFC after: 2 weeks
add separate rx/tx ring indexes
add ring specifier in nm_open device name
netmap.c, netmap_vale.c
more consistent errno numbers
netmap_generic.c
correctly handle failure in registering interfaces.
tools/tools/netmap/
massive cleanup of the example programs
(a lot of common code is now in netmap_user.h.)
nm_util.[ch] are going away soon.
pcap.c will also go when i commit the native netmap support for libpcap.
Put test programs for internal modules into a 'detail' subdirectory of the
libatf-c and libatf-c++ test directories, just as the upstream distribution
does. This is necessary because the tests assume such layout to find the
process_helper program, and currently fail because of this divergence.
MFC after: 1 week
The origin of WEP comes from IEEE Std 802.11-1997 where it defines
whether the frame body of MAC frame has been encrypted using WEP
algorithm or not.
IEEE Std. 802.11-2007 changes WEP to Protected Frame, indicates
whether the frame is protected by a cryptographic encapsulation
algorithm.
Reviewed by: adrian, rpaulo
Most relevant features:
- netmap emulation on any NIC, even those without native netmap support.
On the ixgbe we have measured about 4Mpps/core/queue in this mode,
which is still a lot more than with sockets/bpf.
- seamless interconnection of VALE switch, NICs and host stack.
If you disable accelerations on your NIC (say em0)
ifconfig em0 -txcsum -txcsum
you can use the VALE switch to connect the NIC and the host stack:
vale-ctl -h valeXX:em0
allowing sharing the NIC with other netmap clients.
- THE USER API HAS SLIGHTLY CHANGED (head/cur/tail pointers
instead of pointers/count as before). This was unavoidable to support,
in the future, multiple threads operating on the same rings.
Netmap clients require very small source code changes to compile again.
On the plus side, the new API should be easier to understand
and the internals are a lot simpler.
The manual page has been updated extensively to reflect the current
features and give some examples.
This is the result of work of several people including Giuseppe Lettieri,
Vincenzo Maffione, Michio Honda and myself, and has been financially
supported by EU projects CHANGE and OPENLAB, from NetApp University
Research Fund, NEC, and of course the Universita` di Pisa.
- Compile the tests with .t suffix, so prove can use them directly.
- The CHECKX() macro should increment ntest just like the CHECK() macro.
- For consistency remove # from the pwd.t output.
Submitted by: Mariusz Zaborski <oshogbo@FreeBSD.org>
executable ksh scripts. These are currently not copied into the test
directory the way that compiled executables are, so the tests which make use
of them cannot work. This changes the test Makefile to copy the scripts into
the test directory.
clang-specific or gcc-specific flags, introduce the following new
variables for use in Makefiles:
CFLAGS.clang
CFLAGS.gcc
CXXFLAGS.clang
CXXFLAGS.gcc
In bsd.sys.mk, these get appended to the regular CFLAGS or CXXFLAGS for
the right compiler.
MFC after: 1 week
Normal and bold fonts each have a glyph map for single or left half-
glyphs, and right half glyphs. The flag TF_CJK_RIGHT in term_char_t
requests the right half-glyph.
Reviewed by: ed@
Sponsored by: The FreeBSD Foundation
This change is a proof of concept on how to easily integrate existing
tests from the tools/regression/ hierarchy into the /usr/tests/ test
suite and on how to adapt them to the new layout for src.
To achieve these goals, this change:
- Moves tests from tools/regression/bin/<tool>/ to bin/<tool>/tests/.
- Renames the previous regress.sh files to legacy_test.sh.
- Adds Makefiles to build and install the tests and all their supporting
data files into /usr/tests/bin/.
- Plugs the legacy_test test programs into the test suite using the new
TAP backend for Kyua (appearing in 0.8) so that the code of the test
programs does not have to change.
- Registers the new directories in the BSD.test.dist mtree file.
Reviewed by: freebsd-testing
Approved by: rpaulo (mentor)
expect the installed ksh binary to be named "ksh", which is not the case
when it's installed on FreeBSD via the shells/ksh93 port. Allow for it to be
"ksh93" as well so that the tests can actually pass.
giving access to functionality that is not available in capability mode
sandbox. The functionality can be precisely restricted.
Start with the following services:
- system.dns - provides API compatible to:
- gethostbyname(3),
- gethostbyname2(3),
- gethostbyaddr(3),
- getaddrinfo(3),
- getnameinfo(3),
- system.grp - provides getgrent(3)-compatible API,
- system.pwd - provides getpwent(3)-compatible API,
- system.random - allows to obtain entropy from /dev/random,
- system.sysctl - provides sysctlbyname(3-compatible API.
Sponsored by: The FreeBSD Foundation
single threaded installworld, installkernel and distribution (using
NANO_MAKE). Setting NANO_PMAKE to 'make -j 12' would otherwise bomb
during installation of world.
MFC after: 2 weeks
Although <&0 does nothing, it is a redirection affecting standard input and
should therefore disable the </dev/null redirection implicit in a background
command.
