to NO of course). Provide a basic ruleset file, rc.bsdextended, but allow
the filename to be overridden through rc.conf.
Discussed with: rwatson (awhile ago)
by default when named is enabled. Also, improve our default directory
layout by creating /var/named/etc/namedb/{master|slave} directories,
and use the former for the generated localhost* files.
Rather than using pax to copy device entries, mount devfs in the
chroot directory.
There may be some corner cases where things need to be adjusted,
but overall this structure has been well tested on a production
network, and should serve the needs of the vast majority of users.
UPDATING has instructions on how to do the conversion for those
with existing configurations.
complete backout as the ntpd_sync_on_start etc/rc.conf tunable is still
present, though the default is now NO (was YES). Since we're no longer
syncing time at startup by default when ntpd is enabled (as was the case
24hrs ago), remove UPDATING entry pointing out that ntpd(1) -g is slower
than ntpdate(1).
Hopefully ntpd_sync_on_start="YES" can be made the default for -CURRENT
after 5.3 is cut. At the very least, this should be set to YES when a
user requests to have ntpd enabled via sysinstall(1).
Requested by: many
calls to ntpd -g. ntpd is noticably slower than ntpdate, but is also more
accurate. This removes the nasty hackery in rc.d/ntpdate that would parse
out ntp servers from /etc/ntp.conf (ntpd knows how to read its own config
file). By default, ntpd *will* sync with its listed time servers. To
turn this off so that ntpd does not sync, ntpd_sync_on_start="NO" can be
added to /etc/rc.conf. If ntpd is not enabled (the default), then time is
not synced on startup. ntpdate's use has been depreciated by the ntpd
authors for quite some time so this change shouldn't be unexpected.
Suggested by: des
Approved by: roberto (resident ntp guru)
- Ask the user up to X times (3 by default) for the pass-phrase, if
it is incorrect the first time.
- Add support for storing the lockfiles in another other directory
than /etc.
- Document that it is possible to override the location of each single
lockfile.
Approved by: pjd
ip6addrctl_enable is set to YES, address selection policy is installed
into kernel.
If there is /etc/ip6addrctl.conf, it is used for address selection
policy. Even if there is no /etc/ip6addrctl.conf, we install default
policy. In this case, if ipv6_enable is set to YES, we use address
selection policy described in RFC 3484 as default. Otherwise, we
install priority policy for IPv4 address.
The default of ip6addrctl_enable is NO for now. However, it may
better to enable it by default.
hostname, resolve, tmp, and var scripts. The latter three are new and
were repo copied. These scripts no longer depend on being booted with
and NFS root instead attempt to automaticly create mfs /tmp and /var
volumes if the they are not writable. This behavior can be overridden
in /etc/rc.conf.
Reviewed by: luigi, pjd
thing, but we're ready to move on.
2. Remove the -g default argument in named_flags. It doesn't actually do
what most users think it does, and what most users want it to do is already
accomplished with a proper default group for the bind user, which we have.
Also, the -g knob does something entirely different in BIND 9, which leads
to a lot of needless confusion/aggravation.
3. In the rc.d script, don't bogusly override $command, or $rc_flags. Both
are adequately handled in rc.conf[.local].
4. DO properly override $rc_flags if user has named_chrootdir set.
This may need to be revisited, but should be ok for now.
5. Protect all chrootdir-related bits under that variable, instead of
named_rcng.
There is more work to be done here, especially in the area of BIND 9
compatibility, but this is a start at least.
Prompted in part by (legitmate) grousing from: kuriyama, Randy Bush
Certain MTA configurations mean that the notifications from
virecover keep bouncing; so here's a patch to allow administrators
to turn them off.
PR: conf/54910
Submitted by: bms (with a minor cleanup)
that the keys are currently generated by computing the MD5 checksum of 512
bytes read from /dev/random, and are passed to gbde on the command line.
Sponsored by: Teleplan AS
This commit also removes the support for the sysutils/jailer port. This
is inline with the general policy to keep ports related knobs out
of the base system's configuration mechanism.
Submitted by: Juergen Unger <j.unger@addict.de>
the throttling state in response to line transitions. Future plans
include adding support for CPU frequency changes.
Add a devd.conf entry for calling this script.
The default values for this are:
performance_cx_lowest="HIGH" # Use HLT (C0) online
performance_throttle_state="HIGH" # 100% (no throttling)
economy_cx_lowest="LOW" # Use the lowest Cx state possible
economy_throttle_state="HIGH" # 100% (no throttling)
systems are mounted. An example set of entries for /etc/rc.conf:
ataraid_enable="YES"
ataraid_devices="ar0"
ataraid_ar0_set="ad2 ad3"
ataraid_ar0_type="RAID1"
Because there is no "correct" way of doing ATA raid (ie, geom vs.
atacontrol vs. vinum) that is bikeshed proof, this rcng script stays within
the bounds of atacontrol and assumes that other RAID solutions for GEOM or
vinum will end up in a different rcNG script.
Reviewed by: green
time during the boot process. This is needed in the case where NFS mounts
from servers reachable only via IPSEC are in /etc/fstab.
PR: conf/42497
Submitted by: Volker Stolz
Approved by: re (rwatson)
A "driftfile" caches the oscillator offset estimate from boot to boot,
having this means faster and less bumpy time synchronization. Will
be overridden by any value in the config file.
o The following additional configuration attributes of a jail can be
controlled from rc.conf:
- mounting devfs(5)
- mounting fdescfs(5)
- mounting procfs(5)
- custom devfs(8) ruleset
If no ruleset is specified, the default jail ruleset is used.
o The output of executing /etc/rc in the jail is now redirected
to /dev/null. Instead, the hostname of the jail is echoed if
the jail(8) command exited successfully. If the output is wanted
it can probably be redirected to a file (/var/run/$jail maybe)
instead of /dev/null.
Submitted by: Scot W. Hetzel <hetzels@westbend.net>
with modifications by Jens Rehsack <rehsack@liwing.de>
and me.
off by default.
o Apparently the routine displaying the informational messages wasn't
checking its knob in rc.conf, so fix that as well.
Requested by: obrien
devfs(8) rules in rc(8). It is most useful for applying
rules to devfs(5) mount points in /dev or inside jails.
The following line of script is sufficient to
mount a relatively useful+secure devfs(5) in a jail:
devfs_mount_jail /some/jail/dev
Some new shell routines available to scripts that source
rc.subr(5):
o devfs_link - Makes it a little easier to create symlinks
o devfs_init_rulesets - Create devfs(8) rulesets from devfs.rules
o devfs_set_ruleset - Set a ruleset to a devfs(5) mount
o devfs_apply_ruleset - Apply a ruleset to a devfs(5) mount
o devfs_domount - Mount devfs(5) and apply some ruleset
o devfs_mount_jail - Mount devfs(5) and apply a ruleset
appropriate to jails.
Additional rulesets can be specified in /etc/devfs.rules.
If the devfs_system_ruleset variable is defined in rc.conf
and it contains the name of a ruleset defined in /etc/defaults/devfs.rules
or user supplied rulesets in /etc/devfs.rules then that ruleset will
be applied to /dev at startup by the /etc/rc.d/devfs script. It can
also be applied post-startup:
/etc/rc.d/devfs start
This is a more flexible mechanism than the previous method of using
/etc/devfs.conf. However, that method is still available.
Note: since devfs(8) doesn't provide any way for creating symlinks
as part of a ruleset, anyone wishing to create symlinks in a devfs(5)
as part of the bootup sequence will still have to rely on /etc/devfs.conf.
use the atmconfig(8) utility instead of route(8) to install those routes.
For this we need a new rc.conf variable natm_static_routes that works
just like static_routes except that the referenced routes use the syntax
of atmconfig(8).
Okay'ed by: mtm
This commit has two pieces. One half is the watchdog kernel code which lives
primarily in hardclock() in sys/kern/kern_clock.c. The other half is a userland
daemon which, when run, will keep the watchdog from firing while the userland
is intact and functioning.
Approved by: jeff (mentor)
take advantage of the rc.subr(8) glue. They are renamed dhclient_program
and dhclient_flags.
o Rename them in rc.conf(5)
o Rename them in /etc/defaults/rc.conf
o Add the deprecated variables to /etc/rc.subr
o Isolate the use of the 'command' variable to the
NetBSD specific parts in /etc/rc.d/dhclient.
o Now that dhcp_flags has also been renamed it will
be applied properly by rc.subr(8) glue code.
Reported by: John Nielsen <john@jnielsen.net>
All functionality from the previous system has been preserved, and
users should still customize their system boot with the familiar
methods, rc.conf, rc.conf.local, rc.firewall, sysctl.conf, etc.
Users who have customized versions of scripts that have been removed
should take great care when upgrading, since the compatibility code
that used those old scripts has also been removed.
be). Using that string leads rc.network to execute:
# sysctl -w vfs.nfs.bufpackets=DEFAULT
vfs.nfs.bufpackets: 4 -> 0
Which isn't what was intended.
PR: conf/31280
MFC after: 3 days
named(8) daemon by providing a new rc.conf knob: named_pidfile
that defaults to the path specified in the system-installed named.conf(5).
Approved by: markm (mentor)
Reviewed by: dougb
Noticed by : Galen Sampson <galen_sampson@yahoo.com>
Dan Pelleg <daniel+bsd@pelleg.org>
PR: conf/46402
MFC: 2 weeks (with re@ approval)
background fsck. The delay defaults to sixty seconds to allow
large applications such as the X server to start before disk I/O
bandwidth is monopolized by fsck.
Submitted by: Brooks Davis <brooks@one-eyed-alien.net>
Sponsored by: DARPA & NAI Labs.
where people want to have the cards configured. Lack of -z is a speed
optimization.
Submitted by: many voices on mobile@
Approved by: re@ (rwatson)
MFC after: 3 days
to specify rules definition file for ipfilter. The default is
/etc/ipf6.rules. If there is a file which is specified by
'ipv6_ipfilter_rules', IPv6 rule is installed.
Reviewed by: Ronald van der Pol <Ronald.vanderPol@rvdp.org>
MFC after: 1 week
xntpd_* -> ntpd_*
portmap_* -> rpcbind_*
Also change single_mountd_enable to mountd_enable.
We also include shims for all the old variable names.
Submitted by: Mike Makonnen <makonnen@pacbell.net>
fix a comment that suggested setting ipv6_ipv4mapping to blank. This
will aid in merging with rcng which requires all veriables to be
explicitly set.
Submitted by: Mike Makonnen
MFC after: 1 week
Add /etc/rc.d to the startup dirs list. It is a convenient place to put
custom startup scripts instead of hacking a shared rc.local. eg: ftpd in
listener mode, or maybe even sendmail or another mailer, etc.
<peril sensitive sunglasses off>
again."
As an alternative to sendmail_enable=NONE, solve the boot time problem
for non-sendmail users completely by moving all of the sendmail startup
code from /etc/rc to /etc/rc.sendmail. The source for that script will
be kept in src/etc/sendmail/rc.sendmail so make.conf's NO_SENDMAIL will
prevent it from being installed. A new rc.conf variable,
mta_start_script specifies the script to run to start the user's
preferred MTA. For backward compatibility, it will default to
/etc/rc.sendmail. The specified script is called out of /etc/rc after
checking to make sure it exists. A new rc.sendmail.8 man page has also
been added which now houses the sendmail_* variable descriptions
formerly in rc.conf.5.
Use /etc/rc.sendmail in /etc/mail/Makefile to reduce code duplication.
Reviewed by: -current, -stable, obrien, peter, ru
MFC after: 1 week
at boot time.
Instead of rc.conf's sendmail_enable only accepting YES or NO, it can now
also accept NONE. If set to NONE, none of the other sendmail related
startup items will be done.
Remove an extra queue running daemon might be started that wasn't necessary
(it didn't hurt anything but it wasn't needed).
The new logic is:
# MTA
if ${sendmail_enable} == NONE
# Do nothing
else if ${sendmail_enable} == YES
start sendmail with ${sendmail_flags}
else if ${sendmail_submit_enable} == YES
start sendmail with ${sendmail_submit_flags}
else if ${sendmail_outbound_enable} == YES
start sendmail with ${sendmail_outbound_flags}
endif
# MSP Queue Runner
if ${sendmail_enable} != NONE &&
[ -r /etc/mail/submit.cf] && ${sendmail_msp_queue_enable} == YES
start sendmail with ${sendmail_msp_queue_flags}
endif
Discussed with: Thomas Quinot <Thomas.Quinot@Cuivre.FR.EU.ORG>,
Christopher Schulte <schulte+freebsd@nospam.schulte.org>
MFC after: 1 week
when running natd(8) out of the rc-files. It is perfectly valid for
the interface or alias address to be set in a natd(8) configuration
file, not on the command line. Also, loosen up the restrictions on
identifying an IP address argument in 'natd_interface.'
Fix the documentation, rc.conf(5), to reflect this change.
Take the bogus default for 'natd_interface' out of /etc/defaults/rc.conf.
MFC after: 3 days
at boot (sendmail_enable=NO), a localhost-only daemon may started
(sendmail_submit_enable) as it is needed to accept mail from command line
submissions. If this isn't desired, see etc/mail/README for more hints.
Optionally (sendmail_msp_queue_enable) start a queue runner for the
submission queue in case a daemon isn't available to accept command line
submitted mail at submission time.
Note that the syslog labels for all of these sendmail processes have been
uniquified for easier log parsing.
Try this out in -CURRENT, MFC, and then consider dropping the
'log_in_vain' knob all together. It really is something for
sysctl.conf(5).
PR: bin/32953
Reviewed by: -bugs discussion
MFC after: 1 week
types (networkfs_types) with a version that includes the original
list.
This increases the scope for user error and also means that systems with
networkfs_types set in /etc/rc.conf will not benefit from changes to the
list in /etc/defaults/rc.conf on upgrade.
Instead, store the default list in /etc/rc itself and allow the operator
to append to that list by specifying her own list in networkfs_types.
Rename networkfs_types to extra_netfs_types accordingly, as the new name
better describes the purpose of the variable. Default the value to
'NO'.
the network is initialized. This was first implemented in rev 1.268
of src/etc/rc, but was backed out at wollman's request.
The objection was that the right place for the fix is in mount(8).
Having looked at that problem, I find it hard to believe that
the hoops one would have to jump through can be justified by the
desire for purity alone.
Note that there are reported issues surrounding nfsclient kernel
support and mount_nfs(8), which currently make NFS an ugly exception
to the general case.
With this change, systems with non-NFS network filesystems configured
for mounting on startup in /etc/fstab are no longer guaranteed to
fail on startup.
dhclient and pccard_ether, introduce the concept of a "settle time" to
pccard_ether with the new pccard_ether_delay variable. Defaults to 5
seconds, which is enough time for the ed driver to finish its
autoconfiguration for newer Linksys based cards. This also can
eliminate the ed0: timeout messages that happen at startup as well.
MFC: after RE says OK.
