As suggested in D27598. This also supports MK_WERROR.clang=no and
MK_WERROR.gcc=no to support the existing NO_WERROR.<compiler> uses.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D27601
I got annoyed by the number of warnings that the CheriBSD build was
emitting. It turns out that we are emitting lots of warnings during
bootstrap because bootstrap tools are built with the default compiler
flags and ignore the warnings flags that are set in bsd.sys.mk.
Looking at git blame, it appears that MK_WARNS=no has been passed since
rS112869, replacing the -DNO_WERROR option that was added in rS87775.
This commit changes MK_WARNS=no back to -DNO_WERROR. We need to pass
-DNO_WERROR, since the system compiler might have new warnings that we
don't know about yet, and we shouldn't fail the build in that case.
Reviewed By: imp, brooks
Differential Revision: https://reviews.freebsd.org/D27598
clang-format is enabled conditional on either WITH_CLANG_EXTRAS or
WITH_CLANG_FORMAT. Some sources in libclang are build conditional on
either rule, and obviously the clang-format binary itself depends on the
rule.
clang-format could still use a manual page.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D25427
The CU-SeeMe videoconferencing client and associated protocol is at this
point a historical artifact; there is no need to retain support for this
protocol today.
Reviewed by: philip, markj, allanjude
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24790
Now that we no longer have GCC 4.2.1 in the tree and can assume FreeBSD
is being built with a C++11 compiler available, we can use BSDL dtc
unconditionally and retire the GPL dtc.
GPL dtc now has FreeBSD CI support via Cirrus-CI to help ensure it
continues to build/work on FreeBSD and is available in the ports tree
if needed.
The copy of (copyfree licensed) libfdt that we actually use is in
sys/contrib/libfdt so the extra copy under contrib/dtc/libfdt can be
removed along with the rest of the GPL dtc.
Reviewed by: kevans, ian, imp, manu, theraven
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23192
LLVM's libunwind is used on all FreeBSD-supported CPU architectures and
is a required component.
Reviewed by: brooks (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23123
As described in Warner's email message[1] to the FreeBSD-arch mailing
list we have reached GCC 4.2.1's retirement date. At this time all
supported architectures either use in-tree Clang, or rely on external
toolchain (i.e., a contemporary GCC version from ports).
GCC 4.2.1 was released July 18, 2007 and was imported into FreeBSD later
that year, in r171825. GCC has served us well, but version 4.2.1 is
obsolete and not used by default on any architecture in FreeBSD. It
does not support modern C and does not support arm64 or RISC-V.
Thanks to everyone responsible for maintaining, updating, and testing
GCC in the FreeBSD base system over the years.
So long, and thanks for all the fish.
[1] https://lists.freebsd.org/pipermail/freebsd-arch/2020-January/019823.html
PR: 228919
Reviewed by: brooks, imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23124
I've been advised that the model that uses these are fairly resilient, but
we do know the proper path to use (or remove, in the case of ^/targets/...),
so go ahead and update them to reflect that.
The env space consumed by exporting all libc's .meta files
left little room for command line,
so unexport when done.
Update dirdeps.mk to latest and add
dirdeps-targets.mk to simplify/update targets/Makefile
Makefile changes to go with Makefile.depend changes in D22494
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22495
Now that we have a way to obtain entropy in capability mode
(getrandom(2)), libcap_random is obsolete. Remove it.
Bump __FreeBSD_version in case anything happens to use it, though I've
found no consumers.
Reviewed by: delphij, emaste, oshogbo
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21033
NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.
Numerous posts to arch@ and other locations have found no actual users
for this software.
Relnotes: Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
And build libdl unconditionally. All supported FreeBSD linkers accept
-F / --filter so there is no need to test for support.
Discussed with: kib
Sponsored by: The FreeBSD Foundation
it appropriately when building share/ctypedef and share/colldef.
This makes the resulting locale data in EL->EB (amd64->powerpc64) cross
build and in the native EB build match. Revert the changes done to libc
in r308170 as they are no longer needed.
PR: 231965
Reviewed by: bapt, emaste, sbruno, 0mp
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D17603
Rather then combining hardlink creation for the geom(8) binary with
shared library build, move libraries to src/lib/geom so they are
built and installed normally. Create a common Makefile.classes
which is included by both lib/geom/Makefile and sbin/geom/Makefile
so the symlink and libraries stay in sync.
The relocation of libraries allows libraries to be build for 32-bit
compat. This also reduces the number of non-standard builds in
the system.
This commit is not sufficent to run a 32-bit /sbin/geom on a 64-bit
system out of the box as it will look in the wrong place for libraries
unless GEOM_LIBRARY_PATH is set appropriatly in the environment.
Reviewed by: bdrewery
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15360
kgdb now handles kernel module state internally, so the asf tool serves
no purpose.
PR: 229046
Reviewed by: brooks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15827
ConnectX-4/5 devices in mlx5core.
The dump is obtained by reading a predefined register map from the
non-destructive crspace, accessible by the vendor-specific PCIe
capability (VSC). The dump is stored in preallocated kernel memory and
managed by the mlx5tool(8), which communicates with the driver using a
character device node.
The utility allows to store the dump in format
<address> <value>
into a file, to reset the dump content, and to manually initiate the
dump.
A call to mlx5_fwdump() should be added at the places where a dump
must be fetched automatically. The most likely place is right before a
firmware reset request.
Submitted by: kib@
MFC after: 1 week
Sponsored by: Mellanox Technologies
has been switched to libedit long ago, libreadline was built as an
internallib for a while and kept only for gdbtui which was broken using
libreadline.
Since gdb has been mostly deorbitted in all arches, gdbtui was only installed
on arm and sparc64, given it has been removed, gdb has been switched to use
libedit, no consumers are left for libreadline. Thus this removal
only installed on arm and sparc64.
It is the only bits that keeps us having libreadline in base
The rest of gdb can be switched to libedit and will be in another
commit
xlint is currently a fossil. We have much more useful and alive tools
to do now what xlint did twenty years ago.
I did not cleared some stuff which makes lint operational, in
sys/x86/include and sys/sys, but I might do it as followup. The
x86/include/ucontext.h and _types.h hacks made to please lint was the
main reason for my initial proposal to classify xlint as obsolete and
to remove it.
Also I do not intend to clear sccs ids.
Reviewed by: bapt, brooks, emaste, jhb, pfg
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D13015
This problem was caused by r325329 and r325350.
For the release(7) targets, some will run mm-mtree.sh which itself runs make
with a MAKEOBJDIRPREFIX. The execution of that script leaks OBJROOT,
MAKEOBJDIR, and MAKELEVEL=1 in the environment. This causes the mm-mtree makes
to not do some basic setup of OBJROOT and only use this special
MAKEOBJDIRPREFIX case which fails to empty out MAKEOBJDIRPREFIX for further
nested makes, such as a tree walk. If that tree walk sets OBJROOT/OBJTOP such
as r325329 is doing, then the wrong OBJDIRs end up being used due to the
unemptied MAKEOBJDIRPREFIX being preferred over the proper MAKEOBJDIR.
Pointyhat to: bdrewery
Sponsored by: Dell EMC Isilon
This still keeps the reduced MAKEOBJDIRPREFIX (SRCTOP) redundancy
removed in the OBJDIR, but now keeps all early phase objects
in the same directory rather than split per phase.
The problem of splitting per phase is that later phases want to link in
libraries from earlier phases and base their location on ${OBJTOP}.
Pointyhat to: bdrewery
Reported by: mjoras, Mark Millard
Sponsored by: Dell EMC Isilon
It was supposed to provide a recovery mechanism against bugs in procfs's
long deprecated tracing capabilities.
Remove the tool as a prerequisite to axing the kernel side.
The tracing facility to use is ptrace(2).
MFC after: 2 weeks
