* Makes the TX DMA stopping more similar to Linux code, and potentially
a bit faster. Also, output an error message when TX DMA idling fails.
Taken-From: Linux iwlwifi
Tested:
* AC3165, STA mode
Approved by: adrian (mentor)
Obtained from: DragonFlyBSD git 2ee486ddff973ac552ff787c17e8d83e8ae0f24c
Differential Revision: https://reviews.freebsd.org/D7325
When building a Tx Command for management frames, we are lacking
a check for action frames, for which we should set a different
pm_timeout. This cause the fw to stay awake for 100TU after each
such frame is transmitted, resulting an excessive power consumption.
Taken-From: Linux iwlwifi (git b084a35663c3f1f7)
Approved by: adrian (mentor)
Obtained from: Linux git b084a35663c3f1f7de1c45c4ae3006864c940fe7
Obtained from: DragonFlyBSD git ba00f0e3ae873d6f0d5743e22c3ebc49c44dfdac
Differential Revision: https://reviews.freebsd.org/D7324
The PROT_REQUIRE flag in should be set for data frames above a certain
length, but we were setting it for !data frames above a certain length,
which makes no sense at all.
Taken-From: OpenBSD, Linux iwlwifi
Approved by: adrian (mentor)
Obtained from: DragonFlyBSD git 8cc03924a36c572c2908e659e624f44636dc2b33
Differential Revision: https://reviews.freebsd.org/D7323
- Move cr_canseeinpcb to sys/netinet/in_prot.c in order to separate the
INET and INET6-specific code from the rest of the prot code (It is only
used by the network stack, so it makes sense for it to live with the
other network stack code.)
- Move cr_canseeinpcb prototype from sys/systm.h to netinet/in_systm.h
- Rename cr_seeotheruids to cr_canseeotheruids and cr_seeothergids to
cr_canseeothergids, make them non-static, and add prototypes (so they
can be seen/called by in_prot.c functions.)
- Remove sw_csum variable from ip6_forward in ip6_forward.c, as it is an
unused variable.
Reviewed by: gnn, jtl
Approved by: sjg (mentor)
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D2901
AIO write requests for a TOE socket on a Chelsio T4+ adapter can now
DMA directly from the user-supplied buffer. This is implemented by
wiring the pages backing the user-supplied buffer and queueing special
mbufs backed by raw VM pages to the socket buffer. The TOE code
recognizes these special mbufs and builds a sglist from the VM page
array associated with the mbuf when queueing a work request to the TOE.
Because these mbufs do not have an associated virtual address, m_data
is not valid. Thus, the AIO handler does not invoke sosend() directly
for these mbufs but instead inlines portions of sosend_generic() and
tcp_usr_send().
An aiotx_buffer structure is used to describe the user buffer (e.g.
it holds the array of VM pages and a reference to the AIO job). The
special mbufs reference this structure via m_ext. Note that a single
job might be split across multiple mbufs (e.g. if it is larger than
the socket buffer size). The 'ext_arg2' member of each mbuf gives an
offset relative to the backing aiotx_buffer. The AIO job associated
with an aiotx_buffer structure is completed when the last reference to
the structure is released.
Zero-copy aio_write()'s for connections associated with a given
adapter can be enabled/disabled at runtime via the
'dev.t[45]nex.N.toe.tx_zcopy' sysctl.
MFC after: 1 month
Relnotes: yes
Sponsored by: Chelsio Communications
'wchar_t' is 7 characters long, not 6. r303297 fixed this in libelftc,
but not the second copy of this file that we have in libcxxrt.
PR: 208661
Submitted by: Daniel McRobb
Obtained from: ELF Tool Chain r3480
MFC after: 3 days
llvm libunwind includes a libunwind.cpp, but on ARM libunwind.S is found
first in .PATH. Rename the latter one, since it is not going to be
updated again.
Reviewed by: andrew
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7162
It is a maintained and updated runtime exception stack unwinder that
should be a drop-in replacement.
It can be disabled by setting WITHOUT_LLVM_LIBUNWIND in src.conf.
PR: 206039 [exp-run]
Sponsored by: The FreeBSD Foundation
It was added to sys.mk relatively recently (r274503) for EFI builds
but is no longer used by the base system. The in-tree binutils are
outdated, will not be updated, and will be removed in the future.
Remove it from the toolchain build now to slightly simplify the build
and make sure we don't grow an accidental dependency.
Note that this affects only the toolchain build, and does not affect
/usr/bin/objdump in the built world.
Reviewed by: bdrewery
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6460
and there is no other issues with parallel settime(). Remove spl()
vestiges there as well.
Tested by: pho (as part of the whole patch)
Reviewed by: jhb (same)
Discussed wit: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D7302
setclock() and from simultaneous top-level and interrupt. For this,
tc_windup() is protected with a tc_setclock_mtx spinlock, in the try
mode when called from hardclock interrupt. If spinlock cannot be
obtained without spinning from the interrupt context, this means that
top-level executes tc_windup() on other core and our try may be
avoided.
The boottimebin and boottime variables should be adjusted from
tc_windup(). To be correct, they must be part of the timehands and
read using lockless protocol. Remove the globals and reimplement the
getboottime(9)/getboottimebin(9) KPI using the timehands read
protocol.
Tested by: pho (as part of the whole patch)
Reviewed by: jhb (same)
Discussed wit: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
X-Differential revision: https://reviews.freebsd.org/D7302
Change ntpadj_lock to spinlock always, and rename stuff removing
ADJ/adj from the names. ntp_update_second() requires ntp_lock and is
called from the tc_windup(), so ntp_lock must be a spinlock. Add
missed lock to ntp_update_second().
Tested by: pho (as part of the whole patch)
Reviewed by: jhb (same)
Noted by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
X-Differential revision: https://reviews.freebsd.org/D7302
consumers can now be only one tc_windup() call late.
Use C99 initialization.
Tested by: pho (as part of the whole patch)
Reviewed by: jhb (same)
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
X-Differential revision: https://reviews.freebsd.org/D7302
and getboottimebin(9) KPI. Change consumers of boottime to use the
KPI. The variables were renamed to avoid shadowing issues with local
variables of the same name.
Issue is that boottime* should be adjusted from tc_windup(), which
requires them to be members of the timehands structure. As a
preparation, this commit only introduces the interface.
Some uses of boottime were found doubtful, e.g. NLM uses boottime to
identify the system boot instance. Arguably the identity should not
change on the leap second adjustment, but the commit is about the
timekeeping code and the consumers were kept bug-to-bug compatible.
Tested by: pho (as part of the bigger patch)
Reviewed by: jhb (same)
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
X-Differential revision: https://reviews.freebsd.org/D7302
loop of reading the rtsock's feed. When it used by some scripts,
this leads to growing number of not finished route(8) instances and
thus growing number of rtsock consumers. Add SIGALRM handler to prevent this.
Reviewed by: melifaro
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
So that they can use suitable MP synchronization mechanism.
While I'm here change the bufring init/read/write function names.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7313
number of core files allowed by a particular process when using the %I core
file name pattern.
Sanity check at compile time to ensure the value is within the valid range of
0-10.
Reviewed by: jtl, sjg
Approved by: sjg (mentor)
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D6812
"io" is the default, and allows VGA i/o registers to be
accessed. This is required by Win7/2k8 graphics guests that
use a combination of BIOS int10 and UEFI.
"off" disables all VGA i/o and mem accesses.
"on" is not yet hooked up, but will enable full VGA rendering.
OpenBSD/UEFI >= 5.9 graphics guests can be booted using "vga=off"
- Allow "rfb" to be used instead of "tcp" for the fbuf VNC
description. "tcp" will be removed at a future point and is
kept as an alias.
Discussed with: Leon Dang
MFC after: 3 days
injected without state being set up.
This fixes a core dump when dropping to the UEFI prompt
with graphics enabled and moving the mouse around.
Discussed with: Leon Dang
MFC after: 3 days
returning EAGAIN if they aren't available when the user tries to program
a filter. Do this after validating the filter so that the driver
doesn't bring up the queues if it doesn't have to.
