Commit Graph

17642 Commits

Author SHA1 Message Date
rgrimes
396138442f Add support for Holger Viets mitsumi cd rom driver as prepared by Gary
Clark II.
1993-10-11 07:39:13 +00:00
rgrimes
316de0240a Add support for mitsumi cd rom driver from Holger Viet, as fixed up by
Gary Clark II.
1993-10-11 06:19:40 +00:00
rgrimes
589651cf0f >From: Julian Elischer <julian@jules.DIALix.oz.au>
Subject: Re: Error reading from DAT (fwd)
Date: Mon, 11 Oct 1993 03:02:39 -40962758 (WST)

Some tapes won't do anything until you tell them to load.
Other tapes think that being asked to load is a great excuse to
make the next command return a "unit attention" (media changed) error.
Since we need to do the load, throw in a dummy instruction to cop the
error.

specifically for DEC DAT drives.
1993-10-11 04:53:23 +00:00
rgrimes
3f11d4d9df Fixed the options hd(1,... to be more accurate (removed word options it
now reads:

printf("use hd(1,a)/386bsd to boot sd0 when wd0 is also installed\n");

I know the person wanted more explination, but there is little room in
the boot blocks for verbose text!
1993-10-11 02:43:42 +00:00
rgrimes
1fc79e6c67 Added if_ie entry for Garett Wollmans ATT driver, the drives will be imported
soon.
1993-10-10 16:25:13 +00:00
rgrimes
05e041e08b SYSPDROFF and SYSPDREND are now calculated using KERNBASE, KERNSIZE and
PDRSHIFT.

The SYSTEM constant that was defined in this file has been replaced
with KERNBASE from param.h.

Changed almost all # style comments to /* */ C style comments.  Several
comments cleaned up so that they make a little more since.

In the comments that describe C calling conventions to assembler routines
used a comma space sequence to seperate arguments and removed the space
between the function name and the argument list.

Removed useless comments like /* clr eax */.

Changed all comma space sequences on assemble instructions to just be comma.

Removed spaces after $ operators to make the file consistent, this may need
to change again (ie: $KERNBASE should probably be $(KERNBASE), but for now
it all seems to work just fine.)  This may become a problem with the C
pre-processor.

Changed several double blank lines to single blank lines that where used
to seperate the I/O routines, these routines are blocked enough that we
don't need double blank lines between them.

Changed sequence of I/O routines to be all input functions, all output
functions instead of just the opposite.

Moved the SHOW_A_LOT debug stuff to near the end of the file.

Changed two occurances of the constant 0xfff to NBPG-1.
1993-10-10 06:07:57 +00:00
rgrimes
b6b2858d36 Added a compile time #error so that if the user does not specify on of
the proper I_X86CPU in the config file the following error will occur
while building the kernel: (had to line wrap the error for this message)

../../i386/i386/machdep.c:343: #error This kernel is not configured for one \
of the supported CPUs
1993-10-10 06:01:44 +00:00
rgrimes
a1e11f4c95 Added PDRSHIFT and KERNSIZE so that the PDR offsets can be calculated in
locore.s instead of being constants (3F8, 3FA).
1993-10-10 02:09:44 +00:00
rgrimes
a348e39359 Put sound blaster in alaphabetic order 1993-10-09 23:59:13 +00:00
rgrimes
115a589137 Remove patch kit header, add $Id$, fix tabing on sound blaster cdev entry 1993-10-09 23:56:53 +00:00
jkh
da05edcb72 Added sb entries for upcoming sound blaster driver 1993-10-09 17:00:04 +00:00
jkh
4ab9886e90 Add devsw entries for upcoming sound blaster driver. 1993-10-09 16:56:44 +00:00
dg
511031c574 Correct spelling of "SHMMAXPGS" so the config override will actually work. 1993-10-09 15:29:04 +00:00
chmr
6381360107 Changed the "Insert filesystem floppy" prompt to give the user a choice in
which drive he wants the root file system (A or B).
1993-10-09 08:31:39 +00:00
jkh
386f6d6a1c Removed FAT_CURSOR as default since it breaks certain CGA displays
and it is better to conform to the lowest common denominator.
Those wishing to retain it can always use options FAT_CURSOR in
their config files.
1993-10-08 21:21:59 +00:00
rgrimes
4cea6b395d All:
Remove patch kit headers, and add $Id$
	This is mostly to align some more code with NetBSD.

cpu.h:
	Remove the old function vs. include configuration stuff that was
	ifdefed out when we went to inline functions.
	Remove the define of resettodr that made it a nop, there is
	already a function that makes it a nop, no need to #define one.
	Remove the #defines of processor types, they are now defined
	in cputypes.h, #include that file.
	Add struct cpu_nameclass for support of cpu types.

frame.h:
	include sys/signal.h, it will be needed in the future.
	put the sigframe structure here that was in machdep.c

pcb.h:
	Add multiple inclusion protection.
	Add pcb_ldt and pcb_ldt_len to pcb structure, this is for the
	user mode ldt.
1993-10-08 20:51:00 +00:00
rgrimes
5fac13f72b All:
removed patch kit headers and sccsids, add $Id$.  This is a general
	clean up and reallignment with NetBSD-current where possible.

genassym.c:
	removed extranious include of reg.h
	removed old FP_* defines that have been ifdefed out since the patch kit
	removed PCB_SIGC that is not referenced anywhere
	add trapframe and sigframe defines
	add KERNBASE define for use in locore.s

locore.s:
	include npx.h and use NNPX for turning on and off FPU
	include machine/cputypes.h for the types of cpu (used in cpu_identify)
	change SYSPDREND to be one higher, this is really the base of the
	next area, and will be changing again next time I revise the file
	Reverse the NOP defines, you now get slow NOP's by default, this
	may be what is casuing us trouble with some systems.  If you want
	the NOPS to be null you now need to have options DUMMY_NOPS.
	Now get esym from the boot blocks which don't pass it yet, and
	it is not used, but this will be changing.
	Move the bit_colors stuff to be in with the rest of Bruces SHOW_A_LOT
	things for debugging.
	Added NetBSD's CPU type probe code, we now know what type of CPU
	we are running on.
	Adjust kernel pde calcuation to correct for change in SYSPDREND, no
	longer need the +1.

machdep.c
	include npx.h and use NNPX for turning on and off FPU
	include isa.h, map.h(new file), exec.h in preperation for
	changes that are still in process.
	Add some of the code for MACHINE_NONCONTIG that will alow us
	to better map around the BIOS memory area.
	Now print the version, cpu id, real memory and availiable memory
	during boot.
	Correct the calculation of bufpages, the code was mixing pages
	and bytes, it now does the right things.  Removed Bill's hack
	for limiting the erronous calculation.
	add the identifycpu print out code from NetBSD.
	remove the definition of the sigframe struct, it belongs in
	frame.h
	put in printf's about syncing disks on a halt/reboot.
	Change the halted message to be a little easier reading.
	Clean up of the dump messages, makes the source and the output
	much more readable.
	Change 0,0 in several places to have spaces after the commas.
1993-10-08 20:45:12 +00:00
rgrimes
03aa455713 Remove the ``loader overlaps bss, kernel must bzero'' printf since that
is so often reported as an error condition when it is not.  We print the
size of things so for those who want to know if this happened they can
figure it out from the size information that is printed.
1993-10-08 20:19:23 +00:00
rgrimes
301564f77e >From NetBSD
Change the cpu "i386" line to 2 lines:
cpu "I386_CPU"
cpu "I486_CPU"
This is so we can do real CPU classification of code.

Fix missing depend for assym.s which does depend on genassym.c
1993-10-08 16:52:45 +00:00
rgrimes
212a849754 Define the types of cpu's there are, from NetBSD 1993-10-08 13:40:54 +00:00
rgrimes
4de8a9b207 Fix definitions to be in terms of a minimum number of constants by
using the SHIFT value as the basis for the other values, for example
instead of:
#define		NBPG		4096
#define		PGSHIFT		12
use:
#define		PGSHIFT		12
#define		NBPG		(1 << PGSHIFT)

===================================================================
RCS file: /a/cvs/386BSD/src/sys/i386/include/param.h,v
retrieving revision 1.3
diff -c -r1.3 param.h
*** 1.3	1993/10/08 12:49:55
--- param.h	1993/10/08 12:53:19
***************
*** 52,76 ****
  #define ALIGNBYTES	(sizeof(int) - 1)
  #define ALIGN(p)	(((u_int)(p) + ALIGNBYTES) &~ ALIGNBYTES)

- #define	NBPG		4096		/* bytes/page */
- #define	PGOFSET		(NBPG-1)	/* byte offset into page */
  #define	PGSHIFT		12		/* LOG2(NBPG) */
  #define	NPTEPG		(NBPG/(sizeof (struct pte)))

- #define NBPDR		(1024*NBPG)	/* bytes/page dir */
- #define	PDROFSET	(NBPDR-1)	/* byte offset into page dir */
  #define	PDRSHIFT	22		/* LOG2(NBPDR) */

  #define	KERNBASE	0xFE000000	/* start of kernel virtual */
  #define	BTOPKERNBASE	((u_long)KERNBASE >> PGSHIFT)

! #define	DEV_BSIZE	512
  #define	DEV_BSHIFT	9		/* log2(DEV_BSIZE) */
  #define BLKDEV_IOSIZE	2048
  #define	MAXPHYS		(64 * 1024)	/* max raw I/O transfer size */

- #define	CLSIZE		1
  #define	CLSIZELOG2	0

  /* NOTE: SSIZE, SINCR and UPAGES must be multiples of CLSIZE */
  #define	SSIZE	1		/* initial stack size/NBPG */
--- 52,79 ----
  #define ALIGNBYTES	(sizeof(int) - 1)
  #define ALIGN(p)	(((u_int)(p) + ALIGNBYTES) &~ ALIGNBYTES)

  #define	PGSHIFT		12		/* LOG2(NBPG) */
+ #define	NBPG		(1 << PGSHIFT)	/* bytes/page */
+ #define	PGOFSET		(NBPG-1)	/* byte offset into page */
  #define	NPTEPG		(NBPG/(sizeof (struct pte)))

  #define	PDRSHIFT	22		/* LOG2(NBPDR) */
+ #define NBPDR		(1 << PDRSHIFT)	/* bytes/page dir */
+ #define	PDROFSET	(NBPDR-1)	/* byte offset into page dir */

  #define	KERNBASE	0xFE000000	/* start of kernel virtual */
  #define	BTOPKERNBASE	((u_long)KERNBASE >> PGSHIFT)

! #define	KERNSIZE	0x00C00000	/* size of kernel virtual */
!
  #define	DEV_BSHIFT	9		/* log2(DEV_BSIZE) */
+ #define	DEV_BSIZE	(1 << DEV_BSHIFT)
+
  #define BLKDEV_IOSIZE	2048
  #define	MAXPHYS		(64 * 1024)	/* max raw I/O transfer size */

  #define	CLSIZELOG2	0
+ #define	CLSIZE		(1 << CLSIZELOG2)

  /* NOTE: SSIZE, SINCR and UPAGES must be multiples of CLSIZE */
  #define	SSIZE	1		/* initial stack size/NBPG */
***************
*** 92,99 ****
  #ifndef	MCLSHIFT
  #define	MCLSHIFT	11		/* convert bytes to m_buf clusters */
  #endif	/* MCLSHIFT */
! #define	MCLBYTES	(1 << MCLSHIFT)	/* size of a m_buf cluster */
! #define	MCLOFSET	(MCLBYTES - 1)	/* offset within a m_buf cluster */

  #ifndef NMBCLUSTERS
  #ifdef GATEWAY
--- 95,102 ----
  #ifndef	MCLSHIFT
  #define	MCLSHIFT	11		/* convert bytes to m_buf clusters */
  #endif	/* MCLSHIFT */
! #define	MCLBYTES	(1 << MCLSHIFT)	/* size of an m_buf cluster */
! #define	MCLOFSET	(MCLBYTES - 1)	/* offset within an m_buf cluster */

  #ifndef NMBCLUSTERS
  #ifdef GATEWAY
1993-10-08 13:01:34 +00:00
rgrimes
8d3bc0116c Removed patch kit header. Cleaned up tabbing and removed extra blank
lines to match NetBSD.  Added $Id$.
Added MID_MACHINE from NetBSD.
Removed definition of DELAY() for non-kernel soures.
Fixed some small english errors that had been corrected in NetBSD.
File is now identical to NetBSD's, but will be changing soon for some
of my clean up work.
1993-10-08 12:49:55 +00:00
rgrimes
50919a0249 Architecture specific syscalls (i386) from NetBSD 1993-10-08 11:31:40 +00:00
rgrimes
57d6f71841 Removed patch kit headers, and rcsid, add $Id$, relocate Terry Lamberts
copyright to match the location that it is in NetBSD.

Remove the __main() {} dummy function, it belongs in kern/init_main.c
1993-10-08 10:47:13 +00:00
rgrimes
87527a6701 From ljo:
machdep.o is a defined to be a target in 2 places.  This was caused by
the addition of the LOAD_ADDRESS stuff.  Removed the extranious target
of machdep.o.
1993-10-06 20:49:17 +00:00
jkh
4109b57b94 Latest changs for XFree86 2.0 1993-10-04 22:23:03 +00:00
jkh
cac43a07fc Latest changes for XFree86 2.0 1993-10-04 22:21:10 +00:00
rgrimes
d12be71b0b Fixed cd0 line to match the GENERIC* kernel configs 1993-10-01 04:26:21 +00:00
rgrimes
3e32530877 Remove old ethernet drivers if_ec, if_ne, and if_we from config files
and from files.i386, they are no longer supported.
1993-10-01 04:20:19 +00:00
dg
d823f577a1 * Revision 2.5 93/09/30 17:44:14 davidg
* patch from vak@zebub.msk.su (Serge V.Vakulenko) to work around
 * a hardware bug in cheap WD clone boards where the PROM checksum
 * byte is always zero
1993-10-01 00:56:43 +00:00
rgrimes
0931dcbc5d New resting home for console.h, it is machine specific. 1993-10-01 00:00:43 +00:00
rgrimes
dabd9eb789 Change #include <sys/console.h> to <machine/console.h>, file will be moved
shortly
1993-09-30 23:59:49 +00:00
rgrimes
a27ff697e2 This is a fix for the 32K DMA buffer region that was not accounted for,
it relocates it to be after the BIOS memory hole instead of right below
the 640K limit.
THANK YOU CHRIS!!!

From: <cgd@postgres.Berkeley.EDU>
Date: Wed, 29 Sep 93 18:49:58 -0700
basically, reserve a new 32k space right after firstaddr,
and put the buffer space there...

the diffs are below, and are in ~cgd/sys/i386/i386 (in machdep.c)
on freefall.  i obviously can't test them, so if some of you would
look the diffs over and try them out...
1993-09-30 23:16:17 +00:00
rgrimes
d4eb979776 Remove we0, since it is being removed from the system 1993-09-30 20:45:37 +00:00
rgrimes
5d9a9a4fd2 Only configure one cd unit now since the code is fully dynamic,
add comment about this to the device cd0 line.
1993-09-30 20:44:32 +00:00
rgrimes
d67eb904e9 >From: vak@zebub.msk.su (Serge V.Vakulenko)
Date: Thu, 30 Sep 1993 15:13:17 +0300

Description:
	Old wt driver is too incomplete and buggy.
	It does not support Archive controllers, BSD-like
	tape ioctls, multiple tape controllers, different
	tape density etc.
Fix:
	This driver is a replacement of the old one.
	It was not tested on different controllers, though.

	This is the streamer tape driver for 386bsd and FreeBSD,
	which supports Wangtek and Archive controllers.
	It was developed as a replacement of the old Wangtek
	tape driver from CMU.

In comparison with the CMU driver, this version has the following enhancements:
1) Support for Archive SC402 and SC499 tape controllers added.
2) Support for up to three tape controllers on the same machine.
3) Support for BSD-style ioctls MTIOCGET, MTIOCTOP.
   Mt command now works adequately with this driver.
4) Asynchronous REWIND and FSF operations, close() will not wait
   until they finish.  The next open() will wait for it instead.
5) Use of WTQICMD ioctl is limited to ERASE and RETENS operations.
   This prevents the user from locking the tape driver by strange
   tape operations.
6) Tape density switching added.
7) The status of the process, blocked on the tape operation,
   is displayed at the WCHAN column of the `ps' command as:

	wtread    reading data from the tape
	wtwrite   writing data to the tape
	wtrfm     reading the tape marker
	wtwfm     writing the tape marker
	wtrew     rewinding the tape
	wterase   doing WTQICMD ERASE operation
	wtretens  doing WTQICMD RETENS operation
	wtorew    doing MTIOCTOP REW/OFFL operation
	wtorfm    doing MTIOCTOP FSF operation
	wtowfm    doing MTIOCTOP WEOF operation

Block interface (writing blocks less than 2048 bytes) is not functioning
pwoperly.  Use raw interface instead.
1993-09-30 20:12:37 +00:00
dg
999ab90b60 * Revision 2.4 93/09/29 21:24:30 davidg
* Added software NIC reset in NE probe to work around a problem
 * with some NE boards where the 8390 doesn't reset properly on
 * power-up. Remove initialization of IMR/ISR in the NE probe
 * because this is inherent in the reset.
1993-09-30 05:27:55 +00:00
dg
9129d383e0 * Revision 2.3 93/09/29 15:10:16 davidg
* credit Charles Hannum
1993-09-29 22:15:53 +00:00
dg
b88b0732c0 * Revision 2.2 93/09/29 13:23:25 davidg
* added no multi-buffer override for 3c503
 *
 * Revision 2.1  93/09/29  12:32:12  davidg
 * changed multi-buffer count for 16bit 3c503's from 5 to 2 after
 * noticing that the transmitter becomes idle because of so many
 * packets to load.
 *
 * Revision 2.0  93/09/29  00:00:19  davidg
 * many changes, rewrites, additions, etc. Now supports the
 * NE1000, NE2000, WD8003, WD8013, 3C503, 16bit 3C503, and
 * a variety of similar clones. 16bit 3c503 now does multi
 * transmit buffers. Nearly every part of the driver has
 * changed in some way since rev 1.30.
1993-09-29 20:30:26 +00:00
rgrimes
7b64493203 Add symbolic name for system page directory end, and change constant to
a calculation for the system page directory tables.
1993-09-29 02:37:41 +00:00
rgrimes
d0cdd3ba9c >From: "Andrew A. Chernov, Black Mage" <ache@astral.msk.su>
Date: Wed, 29 Sep 1993 01:54:53 +0300

To bring this error try to make two swap partitons on one disk:
one of the partitions will be not recognized.
Fix is simple: set uninitialized val variable.
1993-09-29 01:11:19 +00:00
jkh
b1b7cff9e6 From: "Andrew A. Chernov, Black Mage" <ache@astral.msk.su>
AltGr Lock code for zero repeat count ommited, so AltGr Lock
works only one time and never again :-)
1993-09-29 00:42:10 +00:00
rgrimes
e1e9cca1ce Convert another printf into an lprintf since this should only be output
for debugging.

Thanks Chris.
1993-09-28 21:50:59 +00:00
jkh
ba9a9c7eb6 Version number support for XFree86 1993-09-28 20:53:48 +00:00
rgrimes
ef9aeda7ce >From: chmr@edvz.tu-graz.ac.at (Christoph Robitschko)
Date: Tue, 28 Sep 1993 09:03:13 +0100 (MET)
The only place I found with a printf("status %x") is in /sys/i386/isa/lpt.c,
and looks much like a left-over debugging printout...

And it was... I changed it to an lprintf (which is defined if debuggin is on)
			Rod
1993-09-28 17:02:34 +00:00
jkh
49b312bb92 Change to sio for recognising the last serial port on a multiport
card correctly.

Updated syscons to 0.2e, added features for upcoming XFree86 2.0,
fixed crashbug.
1993-09-28 00:01:18 +00:00
rgrimes
a7deae3c0f define SHMMAXPGS where it is suppose to be, you can over ride this with
a kernel config options "SHMAXPGS=xxx", default is currently 64 pages
due to limit kernel map space.
1993-09-27 00:36:57 +00:00
rgrimes
3dcde8f1c0 Added at 0xFE100000 to config line as this kernel HAS to load high, and
it is the place people seem to look for samples.  Also since this kernel
has so so many symbols in it also added SYMTAB_SPACE=89000.
1993-09-26 23:21:12 +00:00
rgrimes
55a1c0319c This Makefile is for FreeBSD, not 4.3 BSD-Reno. Moved $Id$.
Added STRIP=, DBSYM=, and LOAD_ADDRESS?=
Now use LOAD_ADDRESS for linking kernel and for dbsym, added strip -x to
cut kernel size.

Added machde.o: dependency, this will be needed in the future, and for
now it does not hurt anyone.

Cleaned out conf.o: dependency, mkdep does the right things.  Same for
param.c:

This is really a Merge in of NetBSD's Makefile.i386, here is the relevant
rlog info:
----------------------------
revision 1.27
date: 1993/08/27 23:58:20;  author: brezak;  state: Exp;  lines: +2 -2
Need LOAD_ADDRESS for depend pass.
----------------------------
revision 1.25
date: 1993/07/19 16:52:16;  author: mycroft;  state: Exp;  lines: +3 -3
Add ${DEBUG} to CFLAGS and -f to dbsym.
----------------------------
revision 1.22
date: 1993/07/18 10:08:22;  author: mycroft;  state: Exp;  lines: +5 -6
Change to work with new config stuff for specifying load address.
----------------------------
revision 1.20
date: 1993/07/18 09:47:40;  author: mycroft;  state: Exp;  lines: +6 -5
Use new -T option to dbsym.
----------------------------
revision 1.17
date: 1993/07/11 08:42:22;  author: cgd;  state: Exp;  lines: +2 -2
don't ignore errors from dbsym...  it might say that, e.g. there's
not enough symbol space!
----------------------------
revision 1.14
date: 1993/06/06 23:29:03;  author: cgd;  state: Exp;  lines: +2 -2
make conf.o actually depend on conf.c...
----------------------------
revision 1.8
date: 1993/04/29 03:27:39;  author: cgd;  state: Exp;  lines: +5 -10
use ed instead of ex.  the script to use is identical, and we might
want to switch back to using ex when our ex supports -.
----------------------------
revision 1.5
date: 1993/03/24 18:48:57;  author: cgd;  state: Exp;  lines: +1 -1
now use absolute path for dbsym
----------------------------
1993-09-26 19:44:33 +00:00
jkh
a6ae8d8157 Fixed spelling errors 1993-09-25 15:50:43 +00:00
dg
eb3eab88c2 * Revision 1.30 93/09/24 18:43:31 davidg
* fix bug where Compex boards ident themselves as 8003E's and the
 * 16bit override wasn't working
1993-09-25 01:50:15 +00:00
rgrimes
2d5b7074e8 Enable SYSVSHM, and set SHMMAXPGS=64. 1993-09-24 21:01:11 +00:00
rgrimes
8099497b4f >From: rich@id.slip.bcm.tmc.edu.cdrom.com (Rich Murphey)
Date: Sun, 12 Sep 1993 18:19:05 -0500
This will allow you to compile and run a freebsd kernel with shared
memory support.  I haven't tested the shm*() calls yet.

You run out of page table descriptors if you specify 4Mb of sharable
memory (SHMMAXPGS=1024).  I don't know what the limit is, but
SHMMAXPGS=64 works.   Rich
1993-09-24 21:00:29 +00:00
rgrimes
53b6ed3870 >From: bde@kralizec.zeta.org.au (Bruce Evans)
Date: Thu, 16 Sep 93 01:35:10 +1000
Julian writes:

>In fact DEVIDLE and FINDWORK ended up being basically equivalent.
>the bit I wonder about, is the returning of 0.. What (other than
>another request from somewhere else in the kernel) is going to start
>work on the next item on the queue?

I think removing FINDWORK would make things clearer.

Nothing much is going to start work on the next item.  However, it is
pointless to continue processing the queue for the same unready drive.
Aborting all reads and trying harder to perform all writes would be
better.
Julian writes.

> no, actually it should be:
> fdt = fd_data[FDUNIT(minor(dev))].ft;

Fixed.
From: bde@kralizec.zeta.org.au (Bruce Evans)
Date: Thu, 16 Sep 93 22:56:01 +1000
The fd driver reported the wrong cylinder/head/sector numbers after an
error (ST3 is only valid after a sense-drive command), and didn't report
fs block numbers (diskerr was not used).

There was an old problem with writes to block fd devices.   Try this:

1. write protect floppy in fd0.
2. tar cf /dev/fd0a /dev/null.  Repeat a few times.  Later writes tend to
   terminate earlier.
   3. un-write protect floppy.
   4. repeat step 2.  The writes tend to return 0, 2048, 4096, ... and then
      succeed.

This was caused by a bug in vfs__bios.c.  (The bug is fixed in NetBSD's
vfs_bio.c.)  fd.c sets bp->b_resid to nonzero after an error.  vfs__bios.c
was not initializing bp->b_resid.  This causes some writes to terminate
early (e.g., writes to block devices; see spec_write()).

Related funnies:

1. Nothing tries to write the residual bytes.
2. The wd driver sets bp->b_resid to 0 after an error, so there's no
   way anything else could write the residual bytes.
3. I use the block fd device for tar because the raw device seemed to
   have more bugs long ago, and because it ought to be able to handle
   buffering more transparently (I don't want to have to know the
   device size).  But spec_write() always uses the size BLKDEV_IOSIZE
   == 2048 which is too small.  For disks it should use the size of
   one track (rounded down to meet the next track boundary or the i/o
   size).  Here it would help if the DIOCGPART ioctl worked.  But
   DIOCGPART is not implemented for floppies, and the disk size is
   ignored except for partitions of type FS_BSDFFS.

Bruce
1993-09-23 15:22:57 +00:00
dg
ee104ee3b5 rewrote interrupt code to be cleaner, fixed up some other parts
to make it easier to add future board types.
1993-09-22 17:47:43 +00:00
rgrimes
10fadf89af Bring README into sync with Julians latest README (1 line deleted which was
a reference to README.AHA1742)
1993-09-21 20:26:02 +00:00
rgrimes
080a359070 Increased pseudo-device bpfilter from 1 unit to 4 units 1993-09-21 06:16:07 +00:00
rgrimes
24087ad17c Increase the number of ptys to 12, puts the kernel sizes very close to
the limit.
1993-09-21 06:12:20 +00:00
rgrimes
ad0687dc16 >From julian@jules.DIALix.oz.au Fri Sep 10 22:58:30 1993
>Date: Sat, 11 Sep 93 12:59:39 +0800

1/ fix bug where cd0a was unusable because it was compared against
the number of 2k blocks not the number of 512byte blocks.. gave
an error for all reads past 1/4 way through the disk (cd0d was ok).

2/ fix open code so that it now notices if a disk has been changed
and updates the disklabel.

3/ use the new error handling code from st.c

4/ start adding stuff to get ready for using cd_scsi_cmd from
cd_start (like is done in st and sd)

5/ more general cleanups including making dmesg report
sector size of disk.. (believe it or not SUN drives use 512 byte)
1993-09-21 05:30:35 +00:00
rgrimes
00d21e535d Increase the timeout from 2000 counts to 6000 counts, reported by someone
on the net (I lost the mail).  This should fix some units not showing up
during probes.
1993-09-20 06:28:13 +00:00
rgrimes
c56db4c78a The dynamically allocated struct's where not getting properly initialized
as malloc memory is NOT zerod.  Added bzero's after the malloc calls
to make sure that things are initialized.

>From Julian Elischer
1993-09-20 06:27:06 +00:00
rgrimes
5d09f632e8 Enabled floppy drive ioctl's so that disklabel on a floppy is now
quite and works correctly.  This is derived from notes in Bruce Evans
lattest patches to fd.c:

>From: bde@kralizec.zeta.org.au (Bruce Evans)
>Subject: fixes for fd driver

6. I picked up some code posted the other day to implement label ioctls.
   Now `disklabel fd0' works.  See a comment for how to modify conf.c.
1993-09-15 23:29:11 +00:00
rgrimes
fe3380ea19 Removed $Log$ section and patch kit headers. And here is the full
message for Bruces changes:

>From: bde@kralizec.zeta.org.au (Bruce Evans)
>Subject: fixes for fd driver

I think I've fixed some bugs in the 0.2.4 fd driver.

1. The main cause of hangs was that there was no timeout for seeks.  So
   attempting i/o with no floppy in the drive hung iff a seek was required.

2. Opens of unattached drives were allowed.  The kernel usually paniced
   soon after due to a bad pointer.

3. Some timeout functions ran at splclock() instead of splbio().  This
   may not have mattered.

4. The state machine was left in a funny state after a timeout.

5. Some function headers were new-style.

6. I picked up some code posted the other day to implement label ioctls.
   Now `disklabel fd0' works.  See a comment for how to modify conf.c.
1993-09-15 23:27:45 +00:00
rgrimes
9a1f245561 >From: paul@u.tvt.se (Paul Pries)
>Subject: Bad bug in kbdtables.h [FreeBSD]

I found a bug in /sys/i386/isa/kbdtables.h which contain the
different keyboard layouts for syscons.  This regards all tables exept
the Danish and US.  When compiling the kernel with any other keymapping
than Danish or none at all (US), you get an error that 'key_map' is undefined.
This is because there is a typo in the name of the struct containing
the tables, keymap intead of key_map.
1993-09-15 23:03:21 +00:00
jkh
c9fee73323 Bruce's multifarious patches for the floppy driver (not well tested, but
since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
rgrimes
352c5d78ee Put the uha0 controller at its proper default IRQ of 14! Thanks Warner! 1993-09-13 03:15:26 +00:00
rgrimes
39522705b5 >From: rich@id.slip.bcm.tmc.edu.cdrom.com (Rich Murphey)
I'd like to be able to say:

options         "SYMTAB_SPACE=78000"    # Kernel debugger symbol table size

If this seems a reasonable interim solution for freebsd, here's the
patch.. Rich
1993-09-12 21:56:50 +00:00
nate
ef1065697e Removed volatile functions which were causing grief in the system, since
volatile functions are undefined, and there is no reason to have them
in our kernel.
1993-09-10 22:14:37 +00:00
rgrimes
af0d0830a1 This is just to shut the compiler up
===================================================================
RCS file: /a/cvs/386BSD/src/sys/i386/i386/vm_machdep.c,v
retrieving revision 1.3
diff -c -r1.3 vm_machdep.c
*** 1.3	1993/07/27 10:52:21
--- vm_machdep.c	1993/09/10 20:12:53
***************
*** 179,184 ****
--- 179,186 ----
  #endif
  	splclock();
  	swtch();
+ 	/*NOTREACHED*/
+ 	for(;;);
  }

  cpu_wait(p) struct proc *p; {
1993-09-10 20:39:13 +00:00
ats
438a7d20d4 Fixed a small typo in an error printf. 1993-09-10 18:03:21 +00:00
rgrimes
0f9beb0e4f From guido@gvr.win.tue.nl Wed Sep 8 13:34:16 1993
That is because TIOCMGET was broken. Yes...this is known for some time
and no, we (Bruce and me) never posted it. Why? Simply because we choose
to post fixes when we fixed most of the bugs.

Anyway..now that the slip problems are coming, here is a fix for
correct TIOCMGET behaviour.

-Guido
Note: this should be tested first (Rich?).  Tested by rgrimes
1993-09-10 16:59:16 +00:00
rgrimes
cd0e0e6cee Moved db_end_line after db_printf to eliminate forward reference and
shut up the compiler about prototype mismatch.
1993-09-09 23:03:24 +00:00
rgrimes
9c6b6f0846 The scsi cd.c driver is now fully dynamic. You can change the lines
in your config file from:
device          cd0
device          cd1
...
device          cdn
to either
device          cd0
or
psuedo-device   cd0

The driver now dynamically allocates all per unit dependent structs, so it
will never run out of units (okay, so now we need 32 bit device major/minor
numbers!).  It will allocate unit numbers as it needs them.
1993-09-09 07:18:52 +00:00
dg
e0b6b31115 As of this revision, all known bugs have been fixed. Some of the fixes include:
1) fixed 3c503 lock-up if the thinwire cable was disconnected at boot time
2) 8013EBT boards now work (quite well!) in 16bit/16k mode
3) ED_NO_DOUBLE_BUFFERING flag now works
4) slightly higer performance (about 3%) with 16bit WD/SMC boards
5) support for WD8013WC (10BaseT) boards

   Additionally, the probe code has been reorganized to be much cleaner. This
revision of the driver is 1.25. The release notes have been updated as well.
1993-09-09 07:01:23 +00:00
rgrimes
a2caed0ad2 Changed the delay from 100 seconds to 20 seconds if you don't have scsi
dump code.
1993-09-09 01:30:46 +00:00
rgrimes
c85704fbf7 Changed the pg("ptdi> %x") to a printf and then a panic, since we are
going to panic shortly after this anyway.  Destroys less state, and
keeps the machine from waiting for someone to smash the return key
a few times before it panics!
1993-09-09 01:11:41 +00:00
jkh
d8d8a25db4 Soren's latest syscons changes. 1993-09-08 22:11:48 +00:00
rgrimes
18afef43e4 First pass fixes to start using malloc structures for all per unit
data.  cd_data is now malloced on a per unit basis.

Protected all if ({scsi,cd}_debug).... with #ifdef CDDEBUG to reduce the
the size of the kernel when not debugging.
1993-09-08 21:04:32 +00:00
rgrimes
9b89fe5904 >From Theo Derradt
This is a machine specific include, it belongs in the machine specific
directory.
1993-09-08 19:29:54 +00:00
rgrimes
3653e4ed94 From michaele@vice.ico.tek.com Wed Sep 8 09:50:45 1993
Subject: Re: Some small errors in GAMMA
4.      Move printf("\n"); at line 491 in "/sys/i386/isa/sio.c" to after
        COM_MULTIPORT block at line 512.
From rgrimes:
The above would cause the word (multiport) with out a new line to
appear after the uart type message if you had COM_MULTIPORT enabled.
1993-09-08 17:38:05 +00:00
rgrimes
7f0b713e96 Several fixes to the st driver, for density detection and selection. No
longer have to do the st -f /dev/rst0 blocksize 0 on dat drives!
1993-09-07 15:58:00 +00:00
rgrimes
01e2335ab4 Reverting wd driver back to version before Bruces new driver until the
many bugs can be worked out of it...
1993-09-07 02:08:51 +00:00
rgrimes
93446b99ae Removed patch kit header, added $Id$
Increased timeout in wdwait from 1000 to 2000, this makes the st157A's
at least pass the probe routines :-)
1993-09-06 17:41:46 +00:00
rgrimes
d9a54450e2 Enabled options NS since it can now be compiled! 1993-09-06 16:17:37 +00:00
rgrimes
44821b524f Fixed usage of arpcom and #define blahblah arpcom.blahblah, fixed ioctl
support for options NS (XNS networking).
1993-09-06 16:13:15 +00:00
rgrimes
5b02ffb82e Removed patch kit header, added $Id$
Added support of DONET({IMP,NS,ISO}) so you can now compile with options
NS and ISO, still missing some IMP code, but since the imp is old and
gone I doubt this will ever be used.
1993-09-06 16:12:05 +00:00
rgrimes
778b28eab1 Add the following line to all generic configs as a comment so people would
know that they need to turn this on to get packets to forward.
#options      GATEWAY                 #Host is a Gateway (forwards packets)
1993-09-06 12:26:10 +00:00
rgrimes
af073b484e Added ns_cksum.c from NetBSD 1993-09-06 12:12:24 +00:00
rgrimes
a2c1035acb From: barclay_a_c <barclay_a_c@bt-web.bt.co.uk>
Subject: More information on "netstat -r
Date: Mon, 7 Jun 1993 11:57:33 +0100

Gentlemen,
I have been trying for some time now to get "netstat -r"
working from the 0.2.2 patchkit. I have the following solution to the
bug.

The symbol _radix_node_head needs to be added to the symbols.raw file
to enable the new routing table access. If this symbol is not present
then the old system us used which results in no routes being given. I
don't think that this justifies a patch in its own right but perhaps
could be added to a related patch sometime..
1993-09-05 18:30:58 +00:00
rgrimes
2aa4a4388c Fixed printf if you are using SCSI_DELAY to allow the scsi bus to
settle down after the reset.
1993-09-05 17:41:07 +00:00
rgrimes
ab9d3f8d54 SCSI code update from Julian 1993-09-05 15:42:22 +00:00
rgrimes
89a7e9d6d9 Date: Fri, 3 Sep 93 01:25:44 +1000
From: bde@kralizec.zeta.org.au (Bruce Evans)

This fixes several problems.

It has almost everything that is in the FreeBSD version of Aug 22.
It is missing the bug for 2 drives and still prints <> around the
drive type.  It handles BADEND144 less verbosely.  It does wdgetctlr()
somewhat differently from NetBSD/FreeBSD.

Date: Sun Sep  5 06:45:12 PDT 1993
From: rgrimes@cdrom.com

Fixed printf's to be correct, since Bruce used the old ones.  This driver
still prints phantom wd1's on some Maxtor and other IDE drives, I have
a patch I am sending to Bruce for checking.
1993-09-05 13:46:17 +00:00
rgrimes
0665a2b628 Increased stack size to 8MB just to be on the real safe side. 1993-09-01 09:38:32 +00:00
rgrimes
9833e48d9a Changed default irq and iomem address for ed0 so that most 3c503's and
wd80x3 class boards can be configured to the GENERIC kernels.

Entry was:
device ed0 at isa? port 0x280 net irq 9 iomem 0xd0000 vector edintr

Is now:
device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr
1993-08-31 15:17:26 +00:00
rgrimes
914dc32d8f Replaced the return (1)'s with return (IO_KBDSIZE) in the probe code so
that the printfs during the probing prints the range instead of just the
start address.
1993-08-28 13:26:30 +00:00
rgrimes
b722f788aa Changed trap.c so that a panic will occur if we do not have hardware
FP and we try to call the emulator when it is not compiled in.
Removed the #if defined(i486) || defined(i387) that use to call the
panic if we did not have a math emulator.
Removed an extranious include of i386/i386/math_emu.h from math_emulate.c.
1993-08-28 13:25:22 +00:00
rgrimes
587a02a332 Added options MATH_EMULTATE to the kernel config files to pull in the
387 math emulator (sys/i386/i386/math_emulate.c).  Made that file only
get compiled if options MATH_EMULATE is in the kernel.
1993-08-28 13:21:48 +00:00
rgrimes
76c1049755 Changed MAXSSIZ from MAXDSIZ to 2MB 1993-08-28 09:19:01 +00:00
rgrimes
b783e47251 Revised headers from Julian. Support for generic scsi.
Better audio support
1993-08-28 03:10:05 +00:00
rgrimes
bb7686bc5d Revised drivers from Julian. Support for generic scsi. Fixed scsi tape (st.c)
problems with respect to multiple tar files on one tape.  Now uses malloc
of data structures to reduce static kernel size.
1993-08-28 03:08:59 +00:00
rgrimes
f4f821656d Revised drivers from Julian. 1993-08-28 03:07:44 +00:00
rgrimes
0c08aacc04 Added support for scsi/sg.c as cdev major 18. 1993-08-28 03:06:59 +00:00
rgrimes
d389a11306 xxxprobe now returns the correct number of I/O registers used so that
the probe output during boot gives the I/O range instead of just the
starting address
1993-08-28 03:02:52 +00:00
alm
3d93ce434a prefixed inline functions' parameter names with _ and declared
the return type explicitly.
1993-08-27 05:09:38 +00:00
rgrimes
3362e19b02 Kernel support for ppp 1.3 + fixes 1993-08-27 02:10:12 +00:00
rgrimes
f3592fa457 Added the following line to all the supplied config files to shut up the
config program until this thing is fixed correctly.

maxfdescs	2048			#Max file descriptors per process
1993-08-26 17:55:59 +00:00
alm
19f81735f5 adding fpgetround(3) IEEE floating point environment support 1993-08-25 09:01:44 +00:00
rgrimes
127481a7fb Fix so that unit number 1 is found again. 1993-08-24 19:41:58 +00:00
rgrimes
fec9785d4c Corrected off by 2 error in DELAY macro (it was delaying for 2 * value).
From Bruce Evans.
1993-08-24 01:24:43 +00:00
rgrimes
18960feff9 Some more small nits in the printf's fixed. 1993-08-22 10:00:16 +00:00
rgrimes
f7409da95a New kernel config file for checking out the kernel sources. It does pulls
in every thing that is known to work, and a lot of things that don't!
1993-08-22 02:59:49 +00:00
rgrimes
556032a16c Moved if_we.c to be back in alphabetic order.. 1993-08-21 23:52:36 +00:00
rgrimes
ac97117503 Update to be a clone of GENERICAH, but for syscons driver. 1993-08-21 23:48:06 +00:00
rgrimes
64d85541e3 Added Id: string 1993-08-21 23:47:20 +00:00
rgrimes
4ea7064203 Updated GENERICAH to be more current, new kernel GENERICBT for bt/uha
systems cloned from new GENERICAH.
1993-08-21 23:46:42 +00:00
rgrimes
e2240ed220 Removed patch kit header, added Id: 1993-08-21 22:24:24 +00:00
rgrimes
fb4bc63bad Removal of patch kit header, removal of old scsi as device, added Id: 1993-08-21 22:20:50 +00:00
rgrimes
7617a0440c Fixed printf's so that they announce them selfs correctly (ie aha%d: before
every error message and every probe message).
1993-08-21 20:01:59 +00:00
rgrimes
600802b515 Added from: line to reference the pccons.c derivation of this code, otherwise
the BSD copyright would be very bad to have on this file.
1993-08-20 17:19:29 +00:00
rgrimes
629ddb0624 Enabled call to sddump so that if you have options SCSIDUMP in your kernel
you'll get to the dump code.  If you don't trust this on your disk also
add option NOT_TRUSTED, that disables the dump code, but prints out what
it WOULD do it it was going to scrible on your disk.
1993-08-20 12:51:53 +00:00
rgrimes
cf0a4c9f20 Update scsi code to the latest from Julian. This code is now identical
to the last copy from Julian.  After this commit I will be commiting the
local fixes and makeing diffs to send back to Julian so he can update his
code.

----
From julian@jules.DIALix.oz.au  Thu Aug  5 09:25:23 1993
To: hd@world.std.com, julian@jules.DIALix.oz.au
Cc: nate@bsd.coe.montana.edu
Subject: Re: new scsi

----
From julian@jules.DIALix.oz.au  Sat Aug  7 04:13:17 1993
To: hd@world.std.com (HD Associates)
Cc: nate@bsd.coe.montana.edu
Subject: Re: timeout diffs

Here are the diffs to take the scsi stuff to my latest tree from what
Nate and you received..

the changes remove all the local timeout stuff and use (un)timeout(),

----
From julian@jules.DIALix.oz.au  Sat Aug  7 04:13:45 1993
To: hd@world.std.com (HD Associates)
Cc: nate@bsd.coe.montana.edu, briggs@csugrad.cs.vt.edu

here is a fix for a silly bug in the scsiconf I just sent out
and a similar fix for st.c
1993-08-20 09:23:30 +00:00
rgrimes
2970641bb3 Update scsi code to the latest from Julian. This code is now identical
to the last copy from Julian.  After this commit I will be commiting the
local fixes and makeing diffs to send back to Julian so he can update his
code.

----
>From julian@jules.DIALix.oz.au  Thu Aug  5 09:25:23 1993
To: hd@world.std.com, julian@jules.DIALix.oz.au
Cc: nate@bsd.coe.montana.edu
Subject: Re: new scsi

----
>From julian@jules.DIALix.oz.au  Sat Aug  7 04:13:17 1993
To: hd@world.std.com (HD Associates)
Cc: nate@bsd.coe.montana.edu
Subject: Re: timeout diffs

Here are the diffs to take the scsi stuff to my latest tree from what
Nate and you received..

the changes remove all the local timeout stuff and use (un)timeout(),

----
>From julian@jules.DIALix.oz.au  Sat Aug  7 04:13:45 1993
To: hd@world.std.com (HD Associates)
Cc: nate@bsd.coe.montana.edu, briggs@csugrad.cs.vt.edu

here is a fix for a silly bug in the scsiconf I just sent out
and a similar fix for st.c
1993-08-20 09:21:40 +00:00
rgrimes
c34e1cd617 Update scsi code to the latest from Julian. This code is now identical
to the last copy from Julian.  After this commit I will be commiting the
local fixes and makeing diffs to send back to Julian so he can update his
code.

----
From julian@jules.DIALix.oz.au  Thu Aug  5 09:25:23 1993
To: hd@world.std.com, julian@jules.DIALix.oz.au
Cc: nate@bsd.coe.montana.edu
Subject: Re: new scsi

----
From julian@jules.DIALix.oz.au  Sat Aug  7 04:13:17 1993
To: hd@world.std.com (HD Associates)
Cc: nate@bsd.coe.montana.edu
Subject: Re: timeout diffs

Here are the diffs to take the scsi stuff to my latest tree from what
Nate and you received..

the changes remove all the local timeout stuff and use (un)timeout(),

----
From julian@jules.DIALix.oz.au  Sat Aug  7 04:13:45 1993
To: hd@world.std.com (HD Associates)
Cc: nate@bsd.coe.montana.edu, briggs@csugrad.cs.vt.edu

here is a fix for a silly bug in the scsiconf I just sent out
and a similar fix for st.c
1993-08-20 09:14:22 +00:00
rgrimes
13c3434c96 Moved /sys/scsi code files information to independed files file where it
should have always been.
1993-08-20 08:53:08 +00:00
alm
86178533d7 patch 1of2 to prevent kill -1 syslogd from hanging the console
blindly applied patch provided by Christoph Robitschko:
*** cons.c.orig	Sat Jun 12 07:57:53 1993
--- cons.c	Thu Aug 19 22:34:53 1993
***************
*** 56,61 ****
--- 56,62 ----
  #include "sys/tty.h"
  #include "sys/file.h"
  #include "sys/conf.h"
+ #include "sys/vnode.h"

  #include "cons.h"

***************
*** 105,118 ****
--- 106,130 ----
  	(*cp->cn_init)(cp);
  }

+ static struct vnode	*cnopenvp = NULLVP;
+
+
  cnopen(dev, flag, mode, p)
  	dev_t dev;
  	int flag, mode;
  	struct proc *p;
  {
+ 	int		error;
+
+
  	if (cn_tab == NULL)
  		return (0);
  	dev = cn_tab->cn_dev;
+ 	if (cnopenvp == NULLVP)
+ 		if ((error = getdevvp(dev, &cnopenvp, VCHR))) {
+ 			printf("cnopen: getdevvp returned %d !\n", error);
+ 			return(error);
+ 		}
  	return ((*cdevsw[major(dev)].d_open)(dev, flag, mode, p));
  }

***************
*** 121,130 ****
  	int flag, mode;
  	struct proc *p;
  {
  	if (cn_tab == NULL)
  		return (0);
  	dev = cn_tab->cn_dev;
! 	return ((*cdevsw[major(dev)].d_close)(dev, flag, mode, p));
  }

  cnread(dev, uio, flag)
--- 133,153 ----
  	int flag, mode;
  	struct proc *p;
  {
+ 	int		error;
+
+
  	if (cn_tab == NULL)
  		return (0);
  	dev = cn_tab->cn_dev;
! 	if (vcount(cnopenvp) <= 1)
! 		error = (*cdevsw[major(dev)].d_close)(dev, flag, mode, p);
! 	else
! 		error = 0;
! 	if (error == 0) {
! 		vrele(cnopenvp);
! 		cnopenvp = NULLVP;
! 	return(error);
! 	}
  }

  cnread(dev, uio, flag)
1993-08-20 05:46:09 +00:00
alm
ca482e23cf added Bustek 545 support (patch from Christoph Robitschko):
*** aha1542.c~	Thu Aug 19 14:25:33 1993
--- aha1542.c	Thu Aug 19 14:25:49 1993
***************
*** 954,959 ****
--- 954,960 ----
  	printf("aha%d:",unit);
  #define	PRNT(x) printf(x)
  #endif	__386BSD__
+ 	DELAY(1000);	/* for Bustek 545 */
  	aha_cmd(unit,0, sizeof(conf), 0 ,&conf, AHA_CONF_GET);
  	switch(conf.chan)
  	{
1993-08-19 21:32:59 +00:00
rgrimes
e22df49c23 Fixed poor timeout code in out_fdc. The timeout counter was not being
reinitialized between while loops.  Added comments about what was going
on in the out_fdc routine.

out_fdc now returns if the direction bit is not set in time instead of
trying to wait for MRQ to get cleared.
1993-08-12 09:21:20 +00:00
rgrimes
773148e7ce Removed one more reverence to the old Adaptec 1542b as.c driver, one less
dependent for autoconf.c.
1993-08-10 10:18:33 +00:00
rgrimes
0b65374368 Finish removal of reminents of as.c Adaptec scsi driver. 1993-08-09 19:02:21 +00:00
rgrimes
f604686b22 Moved _eintr{names,cnt} so that vmstat -i does not report all the debugging
stuff of the fast interrupt code.
1993-08-09 18:20:26 +00:00
rgrimes
6533a77e90 Removal of support for old scsi as.c driver, removal off old unneeded
kernel config files since AH?TEST are now supported by GENERICISA,
and the others used the old as driver they are no longer valid.
1993-08-09 14:39:37 +00:00
rgrimes
95c4372f76 From guido@gvr.win.tue.nl Sat Aug 7 06:58:04 1993
I posted some patches on the 386bsd_patchkit list to prohibit io access.
Because of a noninitialised filed in the tss, this was possible.
It is included below as the patch to machdep.c
However, when you do this *necessary* fix (security), it will be
impossible form within user space to do io.

therefor, I included another fix: when you open /dev/io, you
get the access. Of course you can rewrite it to use another minor
and thus giving access to the iospace when /dev/mem is opened, e.g.

NOTE: The /dev/io entry has not been added to /dev/MAKEDEV yet.
The patch is in NetBSD.
1993-08-09 06:16:42 +00:00
rgrimes
355f5f9e0e Fixed for DQFLQUIET flag from: Terry Lee <terry@uivlsisd.csl.uiuc.edu>
I submitted the part of patch00155 that fixes wd.c not reporting any
bad blocks.  Unfortunately, the patch created a new problem that makes new
installations using that kernel impossible.  I have included a patch below that
should fix both problems.  The fix comes from Tom Ivar Helbekkmo's wd driver
(the Norway wd driver).  I've also eliminated the use of the DKFL_QUIET flag
completely, since it is not used anymore.

Fixed wdgetctrl routines for so that it returns a meaniful string for
non IDE disk drives.  It also nolonger returns success when a drive is
not really there.
1993-08-08 07:03:21 +00:00
rgrimes
06eedd4f1f Removed the asking for a root file system when booting from floppy as that
is now handled by the new boot blocks immediatly after the kernel is loaded.
1993-08-08 06:24:15 +00:00
rgrimes
8dcdb66b78 Added printf for cases AHB_ASN (async even notification) and AHB_HW_ERR so
that we are notified when these events occur.  This may lead us to the
cause of certain AHB timeout/lockup problems.

From: Roy Neese of Adaptec
1993-08-08 04:46:37 +00:00
rgrimes
13366311d6 Removed tabs from the front of XXU: messages to make it fit the other
messages closer.  Added missing new line to the message about to many
scsi cd drives.
1993-08-06 12:11:52 +00:00
rgrimes
bed38c22db Fixed **probing for scsi devices** message to have a controller and unit
message on the begining of it:
aha0: **probing for scsi devices**
1993-08-06 11:59:06 +00:00
nate
f0d11b6bf5 Fix the problem where newvers gets called every time make is run on
the kernel.
1993-08-04 23:51:59 +00:00
dg
c4e3d1f069 * Fixed problem where some rev 8013EBT boards want the DCR_LS flag
* set in order to work in 16bit mode.

   Seems also to improve performance by 15%! (?!) I think there might
be more to this flag than the manual says.
1993-08-02 10:36:05 +00:00
jkh
28587823d0 Whoops - try again. Include safeties. 1993-07-30 10:57:09 +00:00
jkh
23476fb8a1 Now have very necessary include safety checks 1993-07-30 10:51:58 +00:00
jkh
2366a82233 Updated syscons to 0.2b - please test this! It won't be in the ALPHA
release, but it's still worth testing.
1993-07-30 02:20:26 +00:00
jkh
9c1c8ff17c Free'd up major number assigned to codrv. 1993-07-30 00:57:06 +00:00
jkh
a066a8dd00 Removed entries for codrv, nuked sample config file since no longer necessary. 1993-07-30 00:56:31 +00:00
nate
bbcccbf030 Syncing our sources back with Julian's, and removing PATCHKIT headers.
Large Bustek changes, most everything else is minimal.
1993-07-29 11:55:37 +00:00
nate
fced37b778 Removed PATCHKIT headers and updated our sources to Julian's with
our patches back in.  Major changes to the Bustek driver and the
Tape driver, the rest are minor.
1993-07-29 11:49:13 +00:00
nate
5c07e28f91 fts(3) integration patches 1993-07-28 01:42:17 +00:00
dg
ed0c248040 * Applied fixes from Bruce Evans to fix COW bugs, >1MB kernel loading,
profiling, and various protection checks that cause security holes
  and system crashes.
* Changed min/max/bcmp/ffs/strlen to be static inline functions
  - included from cpufunc.h in via systm.h. This change
  improves performance in many parts of the kernel - up to 5% in the
  networking layer alone. Note that this requires systm.h to be included
  in any file that uses these functions otherwise it won't be able to
  find them during the load.
* Fixed incorrect call to splx() in if_is.c
* Fixed bogus variable assignment to splx() in if_ed.c
1993-07-27 10:52:31 +00:00
dg
63dd504230 * Added include of systm.h to pick up inlined min/max/bcmp if you have
* them in cpufunc.h. Modified wait loop in reset to look a little better.
 * Added read for talley counters to prevent an infinite loop on old
 * 8003E's if they (the counters) overflow.
1993-07-27 03:13:50 +00:00
jkh
3e928a6cae Sample kernel config for syscons. 1993-07-26 21:27:38 +00:00
jkh
3af03b7095 Added necessary files for syscons (may move font include later, but for now
it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
jkh
3c56c03f84 Added entry for syscons. 1993-07-26 21:19:30 +00:00
dg
542f27732f Fixed logic problem which caused a bogus value to be written to the 3c503
asic register even if the board isn't a 3c503. This caused old 8003E's not
to work because they ignore IO address bits >10bits and the 3c503 asic is
located at +0x400....the offset was ignored by the 8003E and so the
value was written to one of the NIC registers. The bug was discovered by
Wolfgang Solfrank.
1993-07-25 23:43:30 +00:00
rgrimes
5a45c927ea Very small patch from Julian Elischer to make the ultra14f.c driver work
with the 34f as well.
1993-07-22 00:56:23 +00:00
paul
12b53687ad Fixed attach printfs for new format (thanks Chris) 1993-07-21 06:07:58 +00:00
paul
5a51abda4b Added statistical counters ipackets,opackets etc. 1993-07-21 04:18:47 +00:00
dg
420c68008a Added config file override for memory size and added flags to force
8bit or 16bit operation, and a flag to disable transmitter double buffering.
   See the updated "ed.relnotes" file for information about how to set
the flags.
   This should be considered the first "production"  release. It still
needs a manual page, though.
1993-07-20 23:16:50 +00:00
jkh
912c4a4d1d Applied Andrew's patch to fix loop-on-logout problem. 1993-07-20 02:06:49 +00:00
jkh
1b4fd5b5e2 Changed comment relating to memsize to be a little less misleading. 1993-07-20 02:02:12 +00:00
jkh
049741d0c2 Fixed to allow iosiz config parameter to override what was (for me,
incorrectly) probed.  This allows you more flexibility in getting weird
WD 80x3 clones to work.
1993-07-20 01:39:24 +00:00
jkh
834f9415ec Removed check for interrupting board before interrupts were enabled.
This should result in more AST clones getting seen.
1993-07-20 00:22:30 +00:00
rgrimes
abbebfcb9a Fixed sccs id to be From:\n com.c xxxx. The sccs id was changed by the
patch kit and it should not have been.
1993-07-18 21:27:57 +00:00
paul
4a2f4f5023 Fixed warning from gcc1 (but not gcc2 for some reason).
2nd parameter to isread was unsigned char and function declaration was for
char. Changed function declaration to unsigned char.
1993-07-18 20:57:34 +00:00
paul
6509993121 Added volatile void to cpu_exit() in the hope that it would
stop warning about returning from gcc.

It hasn't but the declaration is still correct.
1993-07-18 20:56:17 +00:00
paul
738325f9ce Small fix to correct warning --
missing cast of u_short to int in isread call.
1993-07-18 04:18:00 +00:00
dg
c0ba99ce96 New locore from Christoph Rubitschko. 1993-07-16 23:55:07 +00:00
dg
f23626f7ea Updated kernel files to move occurances of "struct args" syscall
argument definitions outside of the function parameter list.  This is
to reduce the copious warning messages that (non-Jolitz) gcc produces.
Also fixed some bogus variable declarations and casts to make the
compiler happy.
1993-07-16 20:50:44 +00:00
rgrimes
04e9d836ae Changed header from 386BSD BOOT to FreeBSD BOOT. 1993-07-16 13:06:08 +00:00
dg
25bd556275 Modified attach printf's so that the output is compatible with the "new"
way of doing things. There still remain several drivers that need to
be updated.  Also added a compile-time option to pccons to switch the
control and caps-lock keys (REVERSE_CAPS_CTRL) - added for my personal
sanity.
1993-07-15 17:53:14 +00:00
rgrimes
780b2904e1 From Bruce Evans:
lpt doesn't work here if the printer is not turned on at boot time (this
has been reported for other systems).

lpt has a weird mapping of the flag bits vs printer numbers and MAKEDEV
does not understand this (printer 0 uses minor numbers 0-0x3f, printer 1
uses minors 0x40-0x7f, etc).

The following (simpler) problems are fixed by the patch.

lpt did not check the minor number on open, so if NLPT1 == 1 and you
try to open printer 1 then random memory above the lpt_sc array is
accessed.  I thought I had this problem for minors 1 and 2.  However,
it does not actually occur until minor 0x40.  Does anyone have lpt64?

lpt had several unnecessary && broken ANSIisms and other sloppy
declarations.

Bruce
1993-07-13 18:52:49 +00:00
root
ae749d9344 New boot blocks, from Bruce Evans, and NetBSD fixes. Allows kernel to
be loaded above 1MB.  Same boot code for floppies now.  Speed improvements.
etc etc etc. (I don't have much history on this, but then have been tested)
1993-07-13 18:15:32 +00:00
rgrimes
2cc7800d83 Fixed two occarances of ldos which should have been lods.
(From Christoph Robitschko)
1993-07-12 09:34:38 +00:00
rgrimes
10b72356e5 For all ed0 driver lines removed iosiz 8192, and fixed the weintr to be
edintr (error from last time I updated these)
1993-07-12 09:30:31 +00:00
jkh
95042f8e65 Put if_we driver well and truly back into the kernel. 1993-07-09 01:17:46 +00:00
paul
eb1d2a402b Added copyright message -- it didn't have one before 1993-07-09 00:09:34 +00:00
root
a0b680d9d9 Increased default data size (DFLDSIZ) to 16MB. Need to rebuild libutil,
kernel, ps and w for this to work!
1993-07-03 21:21:35 +00:00
nate
be449bcfcc Added (protection) around negative constants, in case a program wants
to use the negative of that constant.

#define NEG_NUM -3
#define SAFE_NEG_NUM (-3)

i = -NEG_NUM;		/* Error --3 */
j = -SAFE_NEG_NUM	/* Okay -(-3) */
1993-06-30 22:59:18 +00:00
nate
4bbfb3867b Setting up for updated (usable) FPE atof/vfprintf/vfscanf fixes 1993-06-29 13:34:33 +00:00
dg
16da259a04 fixed bugs in the probe routine uncovered by the previous fix. 1993-06-27 10:28:28 +00:00
dg
c1b03d1c9c fixed bug in probe that causes it to complain about 'Invalid irq configuration'
if the interface isn't present in the system.
1993-06-26 02:32:26 +00:00
dg
f58e2612b9 Second beta release of device driver for SMC/WD 80x3 ethernet boards +
some additional comments.
1993-06-23 16:22:04 +00:00
dg
5387edd7b5 Second beta release of device driver for WD/SMC 80x3 and 3c503 ethernet boards 1993-06-22 12:10:07 +00:00
paul
b6baa5d4b0 Added bpf support to if_is.c (Isolan driver) 1993-06-19 08:24:14 +00:00
rgrimes
47726e6e3c Obsolete if_we.c driver, more attach call to where it belongs.
Still need to fix all the drivers.
1993-06-18 22:18:57 +00:00
rgrimes
a4c6c9e5b3 Changed all we0's to ed0's. Obsoleting if_we.c driver. 1993-06-18 22:17:43 +00:00
paul
92ff909736 New if_is.c isolan ethernet driver that can handle multiple cards. 1993-06-18 20:25:32 +00:00
paul
371a5c48f5 Upgrade to GCC 2.X 1993-06-18 02:47:24 +00:00
dg
6e3c656e2a Beta release of device driver for SMC/WD80x3 and 3C503 ethernet boards. 1993-06-14 22:21:25 +00:00
rgrimes
bcfa18552e This commit was generated by cvs2svn to compensate for changes in r4,
which included commits to RCS files with non-trunk default branches.
1993-06-12 14:58:17 +00:00
rgrimes
25062ba061 Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00
rgrimes
89bebeef18 Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00
rgrimes
c7d5f60d3a Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00