The general style in sbin/nvmecontrol apppears to print uint64_t types
using %j, so I'm using that instead of the more general (but admittedly
ugly) PRIu64.
Add decoding of the Device Self-test log page and the ability to start
or abort a test.
Reviewed by: imp, mav
Tested by: Muhammad Ahmad <muhammad.ahmad@seagate.com>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D27517
making fsck_ffs(8) run faster, there should be no functional change.
The original fsck_ffs(8) had its own disk I/O management system.
When gjournal(8) was added to FreeBSD 7, code was added to fsck_ffs(8)
to do the necessary gjournal rollback. Rather than use the existing
fsck_ffs(8) disk I/O system, it wrote its own from scratch. Similarly
when journalled soft updates were added in FreeBSD 9, code was added
to fsck_ffs(8) to do the necessary journal rollback. And once again,
rather than using either of the existing fsck_ffs(8) disk I/O
systems, it wrote its own from scratch. Lastly the fsdb(8) utility
uses the fsck_ffs(8) disk I/O management system. In preparation for
making the changes necessary to enable snapshots to be taken when
using journalled soft updates, it was necessary to have a single
disk I/O system used by all the various subsystems in fsck_ffs(8).
This commit merges the functionality required by all the different
subsystems into a single disk I/O system that supports all of their
needs. In so doing it picks up optimizations from each of them
with the results that each of the subsystems does fewer reads and
writes than it did with its own customized I/O system. It also
greatly simplifies making changes to fsck_ffs(8) since everything
goes through a single place. For example the ginode() function
fetches an inode from the disk. When inode check hashes were added,
they previously had to be checked in the code implementing inode
fetch in each of the three different disk I/O systems. Now they
need only be checked in ginode().
Tested by: Peter Holm
Sponsored by: Netflix
Now that we've split up the datastructures used by the kernel and
userspace there's essentually no more overlap between the pf_ruleset.c
code used by userspace and kernelspace.
Copy the userspace bits to the pfctl directory and stop using the kernel
file.
Reviewed by: philip
MFC after: 2 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D27764
runtime contain what is needed to boot in single user and repair a
system, bectl could be handy to have in this situation.
Differential Revision: https://reviews.freebsd.org/D27708
of its lost+found directory by allocating direct block pointers. The
effect was that it was limited to about 19,000 files. One of Peter Holm's
tests produced a filesystem with about 23,000 lost files which meant
that fsck_ffs was unable to recover it. This update allows lost+found
to be expanded into a single indirect block which allows it to store
up to about 6,573,000 lost files.
Reported by: Peter Holm
Sponsored by: Netflix
If the kernel was built without INET6, default to ICMP. Or, if it was
built without INET, default to ICMPv6.
PR: 251725
Reported by: jbeich
Reviewed by: jbeich
Tested by: jbeich
MFC with: 368045
aout support in ldconfig hasn't been required since FreeBSD 2.x.
If someone needs to use FreeBSD 2 shared libraries they will be best
served by using a FreeBSD 2 ldconfig as well.
In aa5e1b42e6 we removed the ldconfig a.out invocation from rc.d but
left the support in ldconfig itself. Remove it now.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27481
commit 665b1365fe added a new NFS mount option that is used to set a
non-default X.509 certificate, that can be used for nfs-over-tls NFS
mounts.
This patch adds a description for it to the man page.
Reviewed by: 0mp
Differential Revision: https://reviews.freebsd.org/D27733
Fix broken CTLFLAG_SKIP when present on the first child of the requested
node.
We don't need to ignore skip for the first node because in sysctl_all()
we've implicitly visited the first node already when oid is specified.
The first call to show_var() in here is after we have iterated to the
next node. When the command line specifically requests a non-node sysctl
we go straight into show_var() without calling sysctl_all().
Reported by: jhb
Reviewed by: jhb
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D27674
- no blank before trailing delimiter
- missing section argument: Xr inet_pton
- skipping paragraph macro: Pp before Ss
- unusual Xr order: syslogd after sysrc
- tab in filled text
There were a few multiline NAT examples which used the .Dl macro with
tabs. I converted them to .Bd, which is a more suitable macro for that case.
MFC after: 1 week
- inserting missing end of block: Ss breaks Bl
- skipping paragraph macro: Pp before Ss
- referenced manual not found: Xr nvme 4 (2 times)
- unknown standard specifier: St The
The macro .St can only be used for standards known by mdoc(7). So add a
SEE ALSO section and add a reference to the NVM Express Base Specification.
MFC after: 2 weeks
The new name more accurately describes what it does and the file move
puts it with other similar functions. Done in preparation for future
cleanups. No functional differences intended.
Sponsored by: Netflix
Historic Footnote: my last FreeBSD svn commit
Allow geom(8) to list geoms with the '/dev/' prefix.
`geom part show` accepts the '/dev/' prefix but `geom part list` does not.
Modify find_geom() in sbin/geom/core/geom.c to be consistent with the behavior
of find_geom() in lib/geom/part/geom_part.c.
PR: 188213
Reported by: Ronald F. Guilmette <rfg@tristatelogic.com>
Reviewed by: imp, kevans
Approved by: kevans (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27556
Detection of interface type by filter must happen before detection of
interface type by prefix. Else the following sequence of commands will
try to create a LAGG interface instead of a VLAN interface, which
accidentially worked previously, because the date pointed to by the
ifr_data pointer was not parsed by VLAN create ioctl(2). This is a
regression after r368229, because the VLAN creation now parses the
ifr_data field.
How to reproduce:
# ifconfig lagg0 create
# ifconfig lagg0.256 create
Differential Revision: https://reviews.freebsd.org/D27521
Reviewed by: kib@ and kevans@
Reported by: raul.munoz@custos.es
Sponsored by: Mellanox Technologies // NVIDIA Networking
This has already confused me once (and I'm pretty sure I wrote it), so let's
clarify: unjailing after the command has completed will only happen if we're
interactive and -U has not been specified.
This just folds two conditionals together to make it obvious how -b/-U
interact with each other.
MFC after: 3 days
PR#250770 was actually just a misunderstanding of what
NFS mount options are needed for AmazonEFS mounts.
This patch attempts to clarify the manpage to clarify this.
This is a content change.
PR: 250770
Reviewed by: bcr
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27430
Building without INET6 support was already possible. Now it's possible to
build ping with only INET6, or even with neither INET nor INET6.
Reported by: bz
Reviewed by: bz
MFC-With: 368045
Differential Revision: https://reviews.freebsd.org/D27394
When invoked as "ping6", ping will now attempt to use ICMPv6 for hostnames
that resolve both IPv4 and IPv6 addresses.
Reviewed by: bz, manu
MFC-With: r368045
Differential Revision: https://reviews.freebsd.org/D27384
If multiple threads are invoking "ifconfig XXX create" a race may occur
which can lead to two different error messages for the same error.
a) ifconfig: SIOCIFCREATE2: File exists
b) ifconfig: interface XXX already exists
This patch ensures ifconfig prints the same error code
for the same case.
Reviewed by: imp@ and kib@
Differential Revision: https://reviews.freebsd.org/D27380
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
There is now a single ping binary, which chooses to use ICMP or ICMPv4
based on the -4 and -6 options, and the format of the address.
Submitted by: Ján Sučan <sucanjan@gmail.com>
Sponsored by: Google LLC (Google Summer of Code 2019)
MFC after: Never
Differential Revision: https://reviews.freebsd.org/D21377
Recent commits to head have added support for NFS over TLS
to the FreeBSD kernel.
To enable use of this for an NFS mount, the "tls" mount_nfs
option has been added.
Once the IETF has assigned an RFC number, I will replace "NNNN"
with the number.
This is a content change.
Reviewed by: gbe
Differential Revision: https://reviews.freebsd.org/D26262
kernel during dump time.
A real life scenario is that cores are compressed to reduce
size of dumpon partition, but we either don't care about space
in the /var/crash or we have a filesystem level compression of
/var/crash. And we want cores to be uncompressed in /var/crash
because we'd like to instantily read them with kgdb. In this
case we want kernel to write cores compressed, but savecore(1)
write them uncompressed.
Reviewed by: markj, gallatin
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27245
