- It was added to libc instead of libm. Hopefully no programs rely
on this mistake.
- It didn't work properly on large long doubles because its argument
was converted to type double, resulting in undefined behavior.
notably, this restores some of the contents in thread_db.h as well
as David Xu's copyright notice. This also fixes the includes in
the MD libpthread files which Scott tried to provide a quick fix
for.
Pointy hat: marcel
i386, ia64 and sparc64. Add stubs for alpha, amd64, ia64 and sparc64 for
libpthread.
Restructure the source files to avoid unnecessary use of subdirectories
that also force us to use non-portable compilation flags to deal with
the uncommon compilation requirements (building archive libraries for
linkage into a shared library).
The libpthread support has been copied from the original local and
cleaned-up to make them WARNS=2 clean.
that also force us to use non-portable compilation flags to deal with
the uncommon compilation requirements (building archive libraries for
linkage into a shared library).
The libpthread support has been copied from the original local and
cleaned-up to make them WARNS=2 clean.
Tested on: amd64, i386, ia64
- Unlike the builtin relational operators, builtin floating-point
constants were not available until gcc 3.3, so account for this.[1]
- Apparently some versions of the Intel C Compiler fallaciously define
__GNUC__ without actually being compatible with the claimed gcc
version. Account for this, too.[2]
[1] Noticed by: Christian Hiris <4711@chello.at>
[2] Submitted by: Alexander Leidinger <Alexander@Leidinger.net>
The getfsstat(2) function expects a buffer and a count, and returns a count.
The confusing part is that the count it takes is a byte count, while the
return value is a count of the number of structures it has filled out.
Spell this out.
1. Add global varible _libkse_debug, debugger uses the varible to identify
libpthread. when the varible is written to non-zero by debugger, libpthread
will take some special action at context switch time, it will check
TMDF_DOTRUNUSER flags, if a thread has the flags set by debugger, it won't
be scheduled, when a thread leaves KSE critical region, thread checks
the flag, if it was set, the thread relinquish CPU.
2. Add pq_first_debug to select a thread allowd to run by debugger.
3. Some names prefixed with _thr are renamed to _thread prefix.
which is allowed to run by debugger.
idea is that we perform multibyte->wide character conversion while parsing
and compiling, then convert byte sequences to wide characters when they're
needed for comparison and stepping through the string during execution.
As with tr(1), the main complication is to efficiently represent sets of
characters in bracket expressions. The old bitmap representation is replaced
by a bitmap for the first 256 characters combined with a vector of individual
wide characters, a vector of character ranges (for [A-Z] etc.), and a vector
of character classes (for [[:alpha:]] etc.).
One other point of interest is that although the Boyer-Moore algorithm had
to be disabled in the general multibyte case, it is still enabled for UTF-8
because of its self-synchronizing nature. This greatly speeds up matching
by reducing the number of multibyte conversions that need to be done.
consequently the exponent is only 11 bits. Testing whether the
exponent equals 32767 in that case only effects to compiler warnings
and thus build breakage.
isnormal() the hard way, rather than relying on fpclassify(). This is
a lose in the sense that we need a total of 12 functions, but it is
necessary for binary compatibility because we have never bumped libm's
major version number. In particular, isinf(), isnan(), and isnanf()
were BSD libc functions before they were C99 macros, so we can't
reimplement them in terms of fpclassify() without adding a dependency
on libc.so.5. I have tried to arrange things so that programs that
could be compiled in FreeBSD 4.X will generate the same external
references when compiled in 5.X. At the same time, the new macros
should remain C99-compliant.
The isinf() and isnan() functions remain in libc for historical
reasons; however, I have moved the functions that implement the macros
isfinite() and isnormal() to libm where they belong. Moreover,
half a dozen MD versions of isinf() and isnan() have been replaced
with MI versions that work equally well.
Prodded by: kris
builtins are available: HUGE_VAL, HUGE_VALF, HUGE_VALL, INFINITY,
and NAN. These macros now expand to floating-point constant
expressions rather than external references, as required by C99.
Other compilers will retain the historical behavior. Note that
it is not possible say, e.g.
#define HUGE_VAL 1.0e9999
because the above may result in diagnostics at translation time
and spurious exceptions at runtime. Hence the need for compiler
support for these features.
Also use builtins to implement the macros isgreater(),
isgreaterequal(), isless(), islessequal(), islessgreater(),
and isunordered() when such builtins are available.
Although the old macros are correct, the builtin versions
are much faster, and they avoid double-expansion problems.
class. This is necessary in order to implement tr(1) efficiently in
multibyte locales, since the brute force method of finding all characters
in a class is infeasible with a 32-bit (or wider) wchar_t.
code. <whew!> This version handles all of the following edge cases:
* Restoring explicit dirs with 000 permissions (star fails this test)
* Restore of implicit or explicit dirs when umask=777
(gtar and star both fail this test)
* Restoring dir paths containing "." and ".." components
This version initially creates all dirs with permission 700 (ignoring
umask), then does a post-extract "fixup" pass to set the correct
permissions (which may or may not depend on umask, depending on the
restore flags and whether it's an explicit or implicit dir).
Permissions are restored depth-first so that permissions within
non-writable dirs can be correctly restored. (The depth-sorting does
correctly account for dirs with ".." components.)
under the RETURN VALUES section so it is consistent with others.
Cleanup the return value text for getenv(3) a little while I am here.
PR: docs/58033
MFC after: 3 days
{ip,udp,tcp} header and return a void * pointing to the payload (i.e. the
first byte past the end of the header and any required padding). Use them
consistently throughout libalias to a) reduce code duplication, b) improve
code legibility, c) get rid of a bunch of alignment warnings.
a short pointer. The previous implementation seems to be in a gray zone
of the C standard, and GCC generates incorrect code for it at -O2 or
higher on some platforms.
These trivial implementations are about 25 times slower than
rint{,f}() on x86 due to the FP environment save/restore.
They should eventually be redone in terms of fegetround() and
bit fiddling.
named link, foo_link or link_foo to lnk, foo_lnk or lnk_foo, fixing
signed / unsigned comparisons, and shoving unused function arguments
under the carpet.
I was hoping WARNS?=6 might reveal more serious problems, and perhaps
the source of the -O2 breakage, but found no smoking gun.
pointer to the corresponding struct thread to the thread ID (lwpid_t)
assigned to that thread. The primary reason for this change is that
libthr now internally uses the same ID as the debugger and the kernel
when referencing to a kernel thread. This allows us to implement the
support for debugging without additional translations and/or mappings.
To preserve the ABI, the 1:1 threading syscalls, including the umtx
locking API have not been changed to work on a lwpid_t. Instead the
1:1 threading syscalls operate on long and the umtx locking API has
not been changed except for the contested bit. Previously this was
the least significant bit. Now it's the most significant bit. Since
the contested bit should not be tested by userland, this change is
not expected to be visible. Just to be sure, UMTX_CONTESTED has been
removed from <sys/umtx.h>.
Reviewed by: mtm@
ABI preservation tested on: i386, ia64
applied to their permissions. Just calculate the
default dir mode once and use it consistently, rather than
trying to remember to calculate it everywhere it's needed.
* Rename some variables/functions/etc to try to make things clearer.
* Add separate flags to control fflag/acl restore
* Collect metadata restore into a single function for clarity
* Propagate errors in metadata restore back out to the client
* Fix some places where errors were being returned when they
shouldn't and vice-versa
* Modes are now always restored; ARCHIVE_EXTRACT_PERM just controls
whether or not umask is obeyed.
* Restore suid/sgid bits only if user/group matches archive
* Cache the last stat results to try to reduce the number of stat calls
archive_entry.
Update the Makefile MLINKS and manpage to bring it up-to-date with
the current status of archive_entry. At least the manpage actually
lists all of the functions now, even if it doesn't really yet explain
them all.
Mostly, these were being used correctly even though a lot of
variables and function names were mis-named.
In the process, I found and fixed a couple of latent bugs and
added a guard against adding an archive to itself.
a/././b/../b/../c/./../d/e/f now work correctly. And yes, a/b and a/c
both get created in this example; if you want, you can create an
entire dir heirarchy from a tar archive with only one entry.
More tweaks to umask support: umasks are now obeyed for all objects,
not just directories; the umask used is now the one in effect at the
corresponding call to archive_read_extract(), so clients that want to
tinker with umask during extract should get the expected behavior.
a fork, make sure that the current thread isn't detached and freed. As
a consequence the thread should be inserted into the head of the
active list only once (in the beginning).
umask in effect when the archive is closed
* Correct a typo that broke implicit dir creation for non-directories.
Thanks to: Garret A Wollman for pointing out my umask oversight
read_extract_dir (which creates directories in the archive). This
brings a number of advantages:
* FINALLY fix the problems creating dirs ending in "/." <sigh>
* Missing parent dirs now get created securely, just like explicit dirs.
(Created 0700 initially, then edited to 0755 at end of extraction.)
* Eliminate some duplicate code and some weird special cases.
While I'm cleaning, inline the regular-file creation code as well.
This change also pointed out one API deficiency: the
archive_read_data_into_XXX functions were originally defined to return
the total bytes read. This is, of course, ambiguous when dealing with
non-contiguous files. Change it to just return a status value.
with ``__'' to avoid polluting the namespace. This doesn't change the
documented rune interface at all, but breaks applications that accessed
_RuneLocale directly.
