alignment restrictive, and help performance on some ethernet cards which
currently copy the entire packet a couple bytes to get the packet aligned
properly...
Wordsmithing by: dwhite
Obtained from: NetBSD (code only)
I'll clean it up later: rwatson
asynchronously by different threads. Thus, declare as volatile the
reference count that is accessed through m_ext's pointer, ref_cnt.
Revert the previous change, revision 1.144, that casts as volatile a
single dereference of ref_cnt.
Reviewed by: bmilekic, dwhite
Problem reported by: kris
MFC after: 3 days
when trim'ing space off the back of a chain; this is indirect
solution to a potential null ptr deref
Noticed by: Coverity Prevent analysis tool (null ptr deref)
Reviewed by: dg, rwatson
do not need to perform an extra memory fetch in the Packet (Mbuf+Cluster)
constructor to initialize the reference counter anymore. The reference
counts are located in a separate memory region (in the slab header,
because this zone is UMA_ZONE_REFCNT), so the memory fetch resulted very
often in a cache miss. Additionally, and perhaps more significantly,
optimize the free mbuf+cluster (packet) case, which is very common, to
no longer require an atomic operation on free (to verify the reference
counter) if the reference on the cluster has never been increased (also
very common). Reduces an atomic on mbuf free on average.
Original patch submitted by: Gerrit Nagelhout <gnagelhout@sandvine.com>
is one, detect mbuf loops and stop, add an extra arg so you can only print
the first x bytes of the data per mbuf (print all if arg is -1), print
flags using %b (bitmask)...
No code in the tree appears to use m_print, and it's just a maner of adding
-1 as an additional arg to m_print to restore original behavior..
MFC after: 4 days
(WITNESS) for code paths that always call uma_zalloc_arg() shortly
after where the check was, because uma_zalloc_arg() already does
a similar check.
No objections from Alfred. Thanks Alfred.
(time grows downward)
thread 1 thread 2
------------|------------
dec ref_cnt |
| dec ref_cnt <-- ref_cnt now zero
cmpset |
free all |
return |
|
alloc again,|
reuse prev |
ref_cnt |
| cmpset, read
| already freed
| ref_cnt
------------|------------
This should fix that by performing only a single
atomic test-and-set that will serve to decrement
the ref_cnt, only if it hasn't changed since the
earlier read, otherwise it'll loop and re-read.
This forces ordering of decrements so that truly
the thread which did the LAST decrement is the
one that frees.
This is how atomic-instruction-based refcnting
should probably be handled.
Submitted by: Julian Elischer
mbuma is an Mbuf & Cluster allocator built on top of a number of
extensions to the UMA framework, all included herein.
Extensions to UMA worth noting:
- Better layering between slab <-> zone caches; introduce
Keg structure which splits off slab cache away from the
zone structure and allows multiple zones to be stacked
on top of a single Keg (single type of slab cache);
perhaps we should look into defining a subset API on
top of the Keg for special use by malloc(9),
for example.
- UMA_ZONE_REFCNT zones can now be added, and reference
counters automagically allocated for them within the end
of the associated slab structures. uma_find_refcnt()
does a kextract to fetch the slab struct reference from
the underlying page, and lookup the corresponding refcnt.
mbuma things worth noting:
- integrates mbuf & cluster allocations with extended UMA
and provides caches for commonly-allocated items; defines
several zones (two primary, one secondary) and two kegs.
- change up certain code paths that always used to do:
m_get() + m_clget() to instead just use m_getcl() and
try to take advantage of the newly defined secondary
Packet zone.
- netstat(1) and systat(1) quickly hacked up to do basic
stat reporting but additional stats work needs to be
done once some other details within UMA have been taken
care of and it becomes clearer to how stats will work
within the modified framework.
From the user perspective, one implication is that the
NMBCLUSTERS compile-time option is no longer used. The
maximum number of clusters is still capped off according
to maxusers, but it can be made unlimited by setting
the kern.ipc.nmbclusters boot-time tunable to zero.
Work should be done to write an appropriate sysctl
handler allowing dynamic tuning of kern.ipc.nmbclusters
at runtime.
Additional things worth noting/known issues (READ):
- One report of 'ips' (ServeRAID) driver acting really
slow in conjunction with mbuma. Need more data.
Latest report is that ips is equally sucking with
and without mbuma.
- Giant leak in NFS code sometimes occurs, can't
reproduce but currently analyzing; brueffer is
able to reproduce but THIS IS NOT an mbuma-specific
problem and currently occurs even WITHOUT mbuma.
- Issues in network locking: there is at least one
code path in the rip code where one or more locks
are acquired and we end up in m_prepend() with
M_WAITOK, which causes WITNESS to whine from within
UMA. Current temporary solution: force all UMA
allocations to be M_NOWAIT from within UMA for now
to avoid deadlocks unless WITNESS is defined and we
can determine with certainty that we're not holding
any locks when we're M_WAITOK.
- I've seen at least one weird socketbuffer empty-but-
mbuf-still-attached panic. I don't believe this
to be related to mbuma but please keep your eyes
open, turn on debugging, and capture crash dumps.
This change removes more code than it adds.
A paper is available detailing the change and considering
various performance issues, it was presented at BSDCan2004:
http://www.unixdaemons.com/~bmilekic/netbuf_bmilekic.pdf
Please read the paper for Future Work and implementation
details, as well as credits.
Testing and Debugging:
rwatson,
brueffer,
Ketrien I. Saihr-Kesenchedra,
...
Reviewed by: Lots of people (for different parts)
packet along with data, instead of in their own packet. When serving files
of size (packetsize - headersize) or smaller, this will result in one less
packet crossing the network. Quick testing with thttpd and http_load has
shown a noticeable performance improvement in this case (350 vs 330 fetches
per second.)
Included in this commit are two support routines, iov_to_uio, and m_uiotombuf;
these routines are used by sendfile to construct the header mbuf chain that
will be linked to the rest of the data in the socket buffer.
Changes from the original implementation:
- Fragmentation is handled by the function m_fragment, which can
be called from whereever fragmentation is needed. Note that this
function is wrapped in #ifdef MBUF_STRESS_TEST to discourage non-testing
use.
- m_fragment works slightly differently from the old fragmentation
code in that it allocates a seperate mbuf cluster for each fragment.
This defeats dma_map_load_mbuf/buffer's feature of coalescing adjacent
fragments. While that is a nice feature in practice, it nerfed the
usefulness of mbuf_stress_test.
- Add two modes of random fragmentation. Chains with fragments all of
the same random length and chains with fragments that are each uniquely
random in length may now be requested.
- Make m_prepend use m_gethdr instead of m_get where
appropriate
- Make m_copym use m_gethdr instead of m_get where
appropriate
- Add a call to m_fixhdr in m_defrag; m_defrag can't
deal with corrupted pkthdr.len counts.
MFC after: 3 days
When enabled, this causes m_defrag to randomly return NULL (following
its normal failure case so that extra memory leaks are not introduced.)
Code similar to this was used to find / fix a few bugs last week.
returning some additional room in the first mbuf in a chain, and
avoiding feature-specific contents in the mbuf header. To do this:
- Modify mbuf_to_label() to extract the tag, returning NULL if not
found.
- Introduce mac_init_mbuf_tag() which does most of the work
mac_init_mbuf() used to do, except on an m_tag rather than an
mbuf.
- Scale back mac_init_mbuf() to perform m_tag allocation and invoke
mac_init_mbuf_tag().
- Replace mac_destroy_mbuf() with mac_destroy_mbuf_tag(), since
m_tag's are now GC'd deep in the m_tag/mbuf code rather than
at a higher level when mbufs are directly free()'d.
- Add mac_copy_mbuf_tag() to support m_copy_pkthdr() and related
notions.
- Generally change all references to mbuf labels so that they use
mbuf_to_label() rather than &mbuf->m_pkthdr.label. This
required no changes in the MAC policies (yay!).
- Tweak mbuf release routines to not call mac_destroy_mbuf(),
tag destruction takes care of it for us now.
- Remove MAC magic from m_copy_pkthdr() and m_move_pkthdr() --
the existing m_tag support does all this for us. Note that
we can no longer just zero the m_tag list on the target mbuf,
rather, we have to delete the chain because m_tag's will
already be hung off freshly allocated mbuf's.
- Tweak m_tag copying routines so that if we're copying a MAC
m_tag, we don't do a binary copy, rather, we initialize the
new storage and do a deep copy of the label.
- Remove use of MAC_FLAG_INITIALIZED in a few bizarre places
having to do with mbuf header copies previously.
- When an mbuf is copied in ip_input(), we no longer need to
explicitly copy the label because it will get handled by the
m_tag code now.
- No longer any weird handling of MAC labels in if_loop.c during
header copies.
- Add MPC_LOADTIME_FLAG_LABELMBUFS flag to Biba, MLS, mac_test.
In mac_test, handle the label==NULL case, since it can be
dynamically loaded.
In order to improve performance with this change, introduce the notion
of "lazy MAC label allocation" -- only allocate m_tag storage for MAC
labels if we're running with a policy that uses MAC labels on mbufs.
Policies declare this intent by setting the MPC_LOADTIME_FLAG_LABELMBUFS
flag in their load-time flags field during declaration. Note: this
opens up the possibility of post-boot policy modules getting back NULL
slot entries even though they have policy invariants of non-NULL slot
entries, as the policy might have been loaded after the mbuf was
allocated, leaving the mbuf without label storage. Policies that cannot
handle this case must be declared as NOTLATE, or must be modified.
- mac_labelmbufs holds the current cumulative status as to whether
any policies require mbuf labeling or not. This is updated whenever
the active policy set changes by the function mac_policy_updateflags().
The function iterates the list and checks whether any have the
flag set. Write access to this variable is protected by the policy
list; read access is currently not protected for performance reasons.
This might change if it causes problems.
- Add MAC_POLICY_LIST_ASSERT_EXCLUSIVE() to permit the flags update
function to assert appropriate locks.
- This makes allocation in mac_init_mbuf() conditional on the flag.
Reviewed by: sam
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
of asserting that an mbuf has a packet header. Use it instead of hand-
rolled versions wherever applicable.
Submitted by: Hiten Pandya <hiten@unixdaemons.com>
were sometimes propagated using M_COPY_PKTHDR which actually did
something between a "move" and a "copy" operation. This is replaced
by M_MOVE_PKTHDR (which copies the pkthdr contents and "removes" it
from the source mbuf) and m_dup_pkthdr which copies the packet
header contents including any m_tag chain. This corrects numerous
problems whereby mbuf tags could be lost during packet manipulations.
These changes also introduce arguments to m_tag_copy and m_tag_copy_chain
to specify if the tag copy work should potentially block. This
introduces an incompatibility with openbsd which we may want to revisit.
Note that move/dup of packet headers does not handle target mbufs
that have a cluster bound to them. We may want to support this;
for now we watch for it with an assert.
Finally, M_COPYFLAGS was updated to include M_FIRSTFRAG|M_LASTFRAG.
Supported by: Vernier Networks
Reviewed by: Robert Watson <rwatson@FreeBSD.org>
o instead of a list of mbufs use a list of m_tag structures a la openbsd
o for netgraph et. al. extend the stock openbsd m_tag to include a 32-bit
ABI/module number cookie
o for openbsd compatibility define a well-known cookie MTAG_ABI_COMPAT and
use this in defining openbsd-compatible m_tag_find and m_tag_get routines
o rewrite KAME use of aux mbufs in terms of packet tags
o eliminate the most heavily used aux mbufs by adding an additional struct
inpcb parameter to ip_output and ip6_output to allow the IPsec code to
locate the security policy to apply to outbound packets
o bump __FreeBSD_version so code can be conditionalized
o fixup ipfilter's call to ip_output based on __FreeBSD_version
Reviewed by: julian, luigi (silent), -arch, -net, darren
Approved by: julian, silence from everyone else
Obtained from: openbsd (mostly)
MFC after: 1 month
header and return that length, was misguided.
The check itself didn't take into account the fact that the
mbuf pointer pased in may be null, and the function is
defined specifically for cases where the caller knows what it wants.
Rather than fix the check I'm removing it as phk suggested.
Submitted by: phk@freebsd.org
