Also, for all interfaces in this mode pass all ethernet frames to upper layer,
even those not addressed to our own MAC, which allows packets encapsulated
in those frames be processed with packet filters (ipfw(8) et al).
Emphatically requested by: Anton Turygin <pa3op@ukr-link.net>
Valuable suggestions by: fenner
following Julian's good suggestion: since you can specify any match
pattern as an option, rules now have the following format:
[<proto> from <src> to <dst>] [options]
i.e. the first part is now entirely optional (and left there just
for compatibility with ipfw1 rulesets).
Add a "-c" flag to show/list rules in the compact form
(i.e. without the "ip from any to any" part) when possible.
The default is to include it so that scripts processing ipfw's
canonical output will still work.
Note that as part of this cleanup (and to remove ambiguity), MAC
fields now can only be specified in the options part.
Update the manpage to reflect the syntax.
Clarify the behaviour when a match is attempted on fields which
are not present in the packet, e.g. port numbers on non TCP/UDP
packets, and the "not" operator is specified. E.g.
ipfw add allow not src-port 80
will match also ICMP packets because they do not have port numbers, so
"src-port 80" will fail and "not src-port 80" will succeed. For such
cases it is advised to insert further options to prevent undesired results
(e.g. in the case above, "ipfw add allow proto tcp not src-port 80").
We definitely need to rewrite the parser using lex and yacc!
render the syntax less ambiguous.
Now rules can be in one of these two forms
<action> <protocol> from <src> to <dst> [options]
<action> MAC dst-mac src-mac mac-type [options]
however you can now specify MAC and IP header fields as options e.g.
ipfw add allow all from any to any mac-type arp
ipfw add allow all from any to any { dst-ip me or src-ip me }
which makes complex expressions a lot easier to write and parse.
The "all from any to any" part is there just for backward compatibility.
Manpage updated accordingly.
noting that the restrictions do not apply if the user invoking the
program is also the owner of the program.
Also, capitalize a section header properly.
PR: misc/41180
Implement the M_SKIP_FIREWALL bit in m_flags to avoid loops
for firewall-generated packets (the constant has to go in sys/mbuf.h).
Better comments on keepalive generation, and enforce dyn_rst_lifetime
and dyn_fin_lifetime to be less than dyn_keepalive_period.
Enforce limits (up to 64k) on the number of dynamic buckets, and
retry allocation with smaller sizes.
Raise default number of dynamic rules to 4096.
Improved handling of set of rules -- now you can atomically
enable/disable multiple sets, move rules from one set to another,
and swap sets.
sbin/ipfw/ipfw2.c:
userland support for "noerror" pipe attribute.
userland support for sets of rules.
minor improvements on rule parsing and printing.
sbin/ipfw/ipfw.8:
more documentation on ipfw2 extensions, differences from ipfw1
(so we can use the same manpage for both), stateful rules,
and some additional examples.
Feedback and more examples needed here.
- Make getvfsbyname() take a struct xvfsconf *.
- Convert several consumers of getvfsbyname() to use struct xvfsconf.
- Correct the getvfsbyname.3 manpage.
- Create a new vfs.conflist sysctl to dump all the struct xvfsconf in the
kernel, and rewrite getvfsbyname() to use this instead of the weird
existing API.
- Convert some {set,get,end}vfsent() consumers to use the new vfs.conflist
sysctl.
- Convert a vfsload() call in nfsiod.c to kldload() and remove the useless
vfsisloadable() and endvfsent() calls.
- Add a warning printf() in vfs_sysctl() to tell people they are using
an old userland.
After these changes, it's possible to modify struct vfsconf without
breaking the binary compatibility. Please note that these changes don't
break this compatibility either.
When bp will have updated mount_smbfs(8) with the patch I sent him, there
will be no more consumers of the {set,get,end}vfsent(), vfsisloadable()
and vfsload() API, and I will promptly delete it.
with ipfw2 extensions and give examples of use of the new features.
This is just a preliminary commit, where i simply added the basic
syntax for the extensions, and clean up the page (e.g. by listing
things in alphabetical rather than random order).
I would appreciate feedback and possible corrections/extensions
by interested parties.
Still missing are a more detailed description of stateful rules
(with keepalives), interaction with of stateful rules and natd (don't do
that!), examples of use with the recently introduced rule sets.
There is an issue related to the MFC: RELENG_4 still has ipfw as a
default, and ipfw2 is optional. We have two options here: MFC this
page as ipfw(8) adding a large number of "SORRY NOT IN IPFW" notes,
or create a new ipfw2(8) manpage just for -stable users. I am all
for the first approach, but of course am listening to your comments.
The bugfix (ipfw2.c) makes the handling of port numbers with
a dash in the name, e.g. ftp-data, consistent with old ipfw:
use \\ before the - to consider it as part of the name and not
a range separator.
The new feature (all this description will go in the manpage):
each rule now belongs to one of 32 different sets, which can
be optionally specified in the following form:
ipfw add 100 set 23 allow ip from any to any
If "set N" is not specified, the rule belongs to set 0.
Individual sets can be disabled, enabled, and deleted with the commands:
ipfw disable set N
ipfw enable set N
ipfw delete set N
Enabling/disabling of a set is atomic. Rules belonging to a disabled
set are skipped during packet matching, and they are not listed
unless you use the '-S' flag in the show/list commands.
Note that dynamic rules, once created, are always active until
they expire or their parent rule is deleted.
Set 31 is reserved for the default rule and cannot be disabled.
All sets are enabled by default. The enable/disable status of the sets
can be shown with the command
ipfw show sets
Hopefully, this feature will make life easier to those who want to
have atomic ruleset addition/deletion/tests. Examples:
To add a set of rules atomically:
ipfw disable set 18
ipfw add ... set 18 ... # repeat as needed
ipfw enable set 18
To delete a set of rules atomically
ipfw disable set 18
ipfw delete set 18
ipfw enable set 18
To test a ruleset and disable it and regain control if something
goes wrong:
ipfw disable set 18
ipfw add ... set 18 ... # repeat as needed
ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18
here if everything goes well, you press control-C before
the "sleep" terminates, and your ruleset will be left
active. Otherwise, e.g. if you cannot access your box,
the ruleset will be disabled after the sleep terminates.
I think there is only one more thing that one might want, namely
a command to assign all rules in set X to set Y, so one can
test a ruleset using the above mechanisms, and once it is
considered acceptable, make it part of an existing ruleset.
gcc memcpy "knows" about types that are supposed to be actually already
aligned and triggers alignment errors doing the memcpy itself.
"Fix" this by changing it to a bcopy(). In this case, we had:
struct timeval *tp;
struct timeval tv1;
memcpy(&tv1,tp,sizeof(tv1));
.. and since gcc *knows* that a pointer to a timeval is longword aligned
and that tv1 is longword aligned, then it can use an inline that assumes
alignment. The following works too:
cp = (char *)tp;
memcpy(&tv1,cp,sizeof(tv1));
Simply casting (char *)tp for the memcpy doesn't work. :-(
This affected different 64 bit platforms in different ways and depends
a lot on gcc as well. I've seen this on alpha and ia64 at least, although
alpha isn't doing it right now.
fsck_ffs did not need it, but quotacheck did include it from fsck_ffs.
A repocopy has now moved the fsck_ffs/preen.c file to quotacheck/preen.c
quotacheck and fsck should probably use the same checkfstab() function
and it should possibly live in libufs.
Trouble is: they have diverged in the meantime.
At least now fsck_ffs is not in the equation anymore.
Sponsored by: DARPA & NAI Labs.
Convert init(8) to use nmount() instead of mount() when
it has to mount devfs. This doesn't happen normally,
since the kernel is supposed to mount devfs itself.
remove all the code which was trying to do so.
This code was nasty in several ways, it was hiding
the kernel bug where the kernel was unable to properly
load a module, and it was quitting if it wasn't able
to load the module. The consequence is that an ABI
breakage of the vfsconf API would have broken *every*
mount utility.
kernel access control.
Teach mount(8) to understand the MNT_MULTILABEL flag, which is used
to determine whether a file system operates with individual per-vnode
labels, or treats the entire file system as a single object with a
single (mount) label. The behavior here will probably evolve some
now that nmount(2) is available and can more flexibly support mount
options.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
+ the header file contains two different opcodes (O_IPOPTS and O_IPOPT)
for what is the same thing, and sure enough i used one in the kernel
and the other one in userland. Be consistent!
+ "keep-state" and "limit" must be the last match pattern in a rule,
so no matter how you enter them move them to the end of the rule.
UFS2 commit.
These bits in essence made any instance of "softupdates expected
corrution", (ie blocks marked allocated but not referenced by an
inode etc) result in a exit value for fsck_ffs of 2.
2 is part of the magic and appearantly undocumented protocol between
fsck_FOO and fsck and means "dump into single user mode ASAP.
Sponsored by: DARPA & NAI Labs.
(and make it easier to find stuff for the old ones). I originally put
everything under one "RULE SUBSYSTEM" so it didn't look like devfs(8)
is dedicated to the rule subsystem, but since nobody has any idea what
else might go here, it's not worth confusing people just to save a
little time for someone that might add something rule-unrelated to
devfs(8) in a few years.
Suggested by: sheldonh, phk
but is useful to have handy. EFI GPT partitions are used instead of the
fdisk+disklabel combination. They are pure 64 bit LBA, are fully
extensible, support up to 16383 partitons per disk, etc.
support creation times such as UFS2) to the value of the
modification time if the value of the modification time is older
than the current creation time. See utimes(2) for further details.
Sponsored by: DARPA & NAI Labs.
administrator to define certain properties of new devfs nodes before
they become visible to the userland. Both static (e.g., /dev/speaker)
and dynamic (e.g., /dev/bpf*, some removable devices) nodes are
supported. Each DEVFS mount may have a different ruleset assigned to
it, permitting different policies to be implemented for things like
jails.
Approved by: phk
* accept "icmptype" as an alias for "icmptypes";
* remove an extra whitespace after "log" rules;
* print correctly the "limit" masks;
* correct a typo in parsing dummynet arguments (this caused a coredump);
* do not allow specifying both "check-state" and "limit", they are
(and have always been) mutually exclusive;
* remove an extra print of the rule before installing it;
* make stdout buffered -- otherwise, if you log its output with syslog,
you will see one entry for each printf(). Rather unpleasant.
fatal on alphas.
Fixed setting of WARNS. WARNS should never be set unconditionally, since
this breaks testing of different WARNS values by setting it at a higher
level (e.g., on the command line).
issue, since the MAXBSIZE-sized buffers are accessed as arrays of
block pointers, but were declared as char[] arrays. Use a union to
avoid this, which also makes a number of casts unnecessary.
Pointed out by: bde
Reviewed by: bde
to a malloc'd buffer in dmpindir() and dirindir(). These functions
recursively call themselves to handle deeper levels of indirect
blocks, so a single static buffer was not suitable.
Bug tracked down by: Don Lewis <dl-freebsd@catspoiler.org>
Approach suggested by: bde
and -Wformat warnings:
o Include timeconv.h for the time conversion functions.
o Remove unused variables.
o Correct a few cases where %d was used when printing longs.
now it should support all the instructions of the old ipfw.
Fix some bugs in the user interface, /sbin/ipfw.
Please check this code against your rulesets, so i can fix the
remaining bugs (if any, i think they will be mostly in /sbin/ipfw).
Once we have done a bit of testing, this code is ready to be MFC'ed,
together with a bunch of other changes (glue to ipfw, and also the
removal of some global variables) which have been in -current for
a couple of weeks now.
MFC after: 7 days
o Fix zero payloading, unbreak ping -s 0.
o Increase socket recieve buffer, ping -s 65467 is working now.
Submitted by: anti-magic sweep based on kris's patch
Reviewed by: bde, silence on -audit
MFC after: 2 months
