for it. Do not not expect a developer to call doadump(). Calling
doadump does not necessarily work when it's declared static. Nor
does it necessarily do what was intended in the context of text
dumps. The dump command always creates a core dump.
Move printing of error messages from doadump to the dump command,
now that we don't have to worry about being called from DDB.
the watchdog, via the watchdog(9) interface.
For that, the WD_LASTVAL bitwise operation is used. It is mutually
exclusive with any explicit timout passing to the watchdogs.
The last timeout can be returned via the wdog_kern_last_timeout()
KPI.
- Add the possibility to pat the watchdogs installed via the watchdog(9)
interface from the kernel.
In order to do that the new KPI wdog_kern_pat() is offered and it does
accept normalized nanoseconds or WD_LASTVAL.
- Avoid to pass WD_ACTIVE down in the watchdog handlers. All the control
bit processing should over to the upper layer functions and not passed
down to the handlers at all.
These changes are intended to be used in order to fix up the watchdog
tripping in situation when the userland is busted, but protection is still
wanted (examples: shutdown syncing / disk dumping).
Sponsored by: Sandvine Incorporated
Reviewed by: emaste, des, cognet
MFC after: 2 weeks
value.
The timeout is expressed in the form T(N) = (2^N * nanoseconds) and can
be easilly extracted from the watchdog interface as a WD_TO_* macro.
That new functionality is supposed to fix re-entering the kernel from DDB
re-enabling the watchdog again (previously disabled) and also offer the
possibility to break for deadlocked DDB commands.
Please note that retro-compatibility is retained.
Sponsored by: Sandvine Incorporated
Approved by: des
MFC after: 10 days
the debugger back-end has changed. This means that switching from ddb
to gdb no longer requires a "step" which can be dangerous on an
already-crashed kernel.
Also add a capability to get from the gdb back-end back to ddb, by
typing ^C in the console window.
While here, simplify kdb_sysctl_available() by using
sbuf_new_for_sysctl(), and use strlcpy() instead of strncpy() since the
strlcpy semantic is desired.
MFC after: 1 month
Implement an optional delay to the ddb reset/reboot command.
This allows textdumps to be run automatically with unattended reboots
after a resonable timeout, while still permitting an administrator to
break into debugger if attached to the console at the time of the
event for further debugging. Cap the maximum delay at 1 week to avoid
highly accidental results, and default to 15s in case of problems
parsing the timeout value.
Move hex2dec helper function from db_thread.c to db_command.c to make
it generally available and prefix it with a "db_" to avoid namespace
collisions.
Reviewed by: rwatson
MFC after: 4 weeks
to fail due to lack of resources to queue siginfo. Add KSI_SIGQ flag
that allows sigqueue_add() to fail while trying to allocate memory for
new siginfo. When the flag is not set, behaviour is the same as for
KSI_TRAP: if memory cannot be allocated, set bit in sq_kill. KSI_TRAP is
kept to preserve KBI.
Add SI_KERNEL si_code, to be used in siginfo.si_code when signal is
generated by kernel. Deliver siginfo when signal is generated by kill(2)
family of syscalls (SI_USER with properly filled si_uid and si_pid), or
by kernel (SI_KERNEL, mostly job control or SIGIO). Since KSI_SIGQ flag
is not set for the ksi, low memory condition cause old behaviour.
Keep psignal(9) KBI intact, but modify it to generate SI_KERNEL
si_code. Pgsignal(9) and gsignal(9) now take ksi explicitely. Add
pksignal(9) that behaves like psignal but takes ksi, and ddb kill
command implemented as pksignal(..., ksi = NULL) to not do allocation
while in debugger.
While there, remove some register specifiers and use ANSI C prototypes.
Reviewed by: davidxu
MFC after: 1 month
the command set (only so long as the module is present):
o add db_command_register and db_command_unregister to add and remove
commands, respectively
o replace linker sets with SYSINIT's (and SYSUINIT's) that register
commands
o expose 3 list heads: db_cmd_table, db_show_table, and db_show_all_table
for registering top-level commands, show operands, and show all operands,
respectively
While here also:
o sort command lists
o add DB_ALIAS, DB_SHOW_ALIAS, and DB_SHOW_ALL_ALIAS to add aliases
for existing commands
o add "show all trace" as an alias for "show alltrace"
o add "show all locks" as an alias for "show alllocks"
Submitted by: Guillaume Ballet <gballet@gmail.com> (original version)
Reviewed by: jhb
MFC after: 1 month
> 0 rather than >= 0, or we will panic when trying to deliver the signal.
MFC after: 3 days
PR: 100802
Submitted by: Valerio Daelli <valerio.daelli at gmail.com>
dump using mechanically generated/extracted debugging output rather than
a simple memory dump. Current sources of debugging output are:
- DDB output capture buffer, if there is captured output to save
- Kernel message buffer
- Kernel configuration, if included in kernel
- Kernel version string
- Panic message
Textdumps are stored in swap/dump partitions as with regular dumps, but
are laid out as ustar files in order to allow multiple parts to be stored
as a stream of sequentially written blocks. Blocks are written out in
reverse order, as the size of a textdump isn't known a priori. As with
regular dumps, they will be extracted using savecore(8).
One new DDB(4) command is added, "textdump", which accepts "set",
"unset", and "status" arguments. By default, normal kernel dumps are
generated unless "textdump set" is run in order to schedule a textdump.
It can be canceled using "textdump unset" to restore generation of a
normal kernel dump.
Several sysctls exist to configure aspects of textdumps;
debug.ddb.textdump.pending can be set to check whether a textdump is
pending, or set/unset in order to control whether the next kernel dump
will be a textdump from userspace.
While textdumps don't have to be generated as a result of a DDB script
run automatically as part of a kernel panic, this is a particular useful
way to use them, as instead of generating a complete memory dump, a
simple transcript of an automated DDB session can be captured using the
DDB output capture and textdump facilities. This can be used to
generate quite brief kernel bug reports rich in debugging information
but not dependent on kernel symbol tables or precisely synchronized
source code. Most textdumps I generate are less than 100k including
the full message buffer. Using textdumps with an interactive debugging
session is also useful, with capture being enabled/disabled in order to
record some but not all of the DDB session.
MFC after: 3 months
define a set of named scripts. Each script consists of a list of DDB
commands separated by ";"s that will be executed verbatim. No higher
level language constructs, such as branching, are provided for:
scripts are executed by sequentially injecting commands into the DDB
input buffer.
Four new commands are present in DDB: "run" to run a specific script,
"script" to define or print a script, "scripts" to list currently
defined scripts, and "unscript" to delete a script, modeled on shell
alias commands. Scripts may also be manipulated using sysctls in the
debug.ddb.scripting MIB space, although users will prefer to use the
soon-to-be-added ddb(8) tool for usability reasons.
Scripts with certain names are automatically executed on various DDB
events, such as entering the debugger via a panic, a witness error,
watchdog, breakpoint, sysctl, serial break, etc, allowing customized
handling.
MFC after: 3 months
captured to a memory buffer for later inspection using sysctl(8), or in the
future, to a textdump.
A new DDB command, "capture", is added, which accepts arguments "on", "off",
"reset", and "status".
A new DDB sysctl tree, debug.ddb.capture, is added, which can be used to
resize the capture buffer and extract buffer contents.
MFC after: 3 months
longjmp to the default context. As result, "alltrace" command may
be prematurely terminated (without error message). This is happens,
for instance, when system is low on memory and referenced page in
kernel-mode thread stack is swapped out.
Protect "alltrace" against termination on trap by setting temporary
kdb_jmpbuf context.
Submitted by: Peter Holm
since they just duplicated the MI `reset' command. Instead of removing
them, make `reboot' an MI alias for `reboot' since this gives a better
way of killing the `r' alias for `reset'. Remove the `registers' command
that was used to kill the alias.
Turn the powerpc and sparc64 MD `halt' command into an MI command.
A copy of sparc64/db_interface.c grew in sun4v just after I found the
extra reboot commands. It has not been changed, and is now not
identical. Duplicated commands come out duplicated in ddb's online
help, but cause large problems when used (e.g., on i386's with 2 halt's
and an hwatch, typing h doesn' give the expected message about an
ambiguous command, but hangs like the halt command or a looping parseri
would).
- `b' is now an official alias for `break'. It used to be an unofficial
alias, but this was broken by adding the `bt' alias for `trace'.
- `t' is now an official alias for `trace'. It used to be an unofficial
alias, but this was broken by adding the `thread' command.
- `registers' is now an alias for `show registers'. This is a hack to
break the unofficial `r' alias for `reset'. `r' really means
`registers' in some debuggers, so I sometimes type it accidentally and
am annoyed when it resets the system. A short command shouldn't have
such a large effect. Now at least `res' must be typed to disambiguate
`reset'.
output width of 79, only 6 columns of width 12 each fit, but 7 columns
were printed.
The fix is to pass the width of the next output to db_end_line() and
not assume there that this width is always 1.
Related unfixed bugs:
- 1 character is wasted for a space after the last column
- suppression of trailing spaces used to limit the misformatting, but
seems to have been lost
- in db_examine(), the width of the next output is not know and is
still assumed to be 1.
install custom pager functions didn't actually happen in practice (they
all just used the simple pager and passed in a local quit pointer). So,
just hardcode the simple pager as the only pager and make it set a global
db_pager_quit flag that db commands can check when the user hits 'q' (or a
suitable variant) at the pager prompt. Also, now that it's easy to do so,
enable paging by default for all ddb commands. Any command that wishes to
honor the quit flag can do so by checking db_pager_quit. Note that the
pager can also be effectively disabled by setting $lines to 0.
Other fixes:
- 'show idt' on i386 and pc98 now actually checks the quit flag and
terminates early.
- 'show intr' now actually checks the quit flag and terminates early.
table. Previously, the ddb code knew of each linker set of auxiliary
commands and which explicit command list they were tied to. These changes
add a simple command_table struct that contains both the static list of
commands and the pointers for any auxiliary linker set of additional
commands. This also makes it possible for other arbitrary command tables
to be defined in other parts of the kernel w/o having to edit ddb itself.
The DB_SET macro has also been trimmed down to just creating an entry in
a linker set. A new DB_FUNC macro does what the old DB_SET did which is
to not only add an entry to the linker set but also to include a function
prototype for the function being added. With these changes, it's now also
possible to create aliases for ddb functions using DB_SET() directly if
desired.
still works. Also, this is consistent with 'show pcpu' vs
'show allpcpu'. (And 'show allstacks' on OS X for that matter.)
- Add 'bt' as an alias for 'trace'. We already have a 'where' alias as
well, so this makes it easier for gdb-wired hands to work in ddb.
Ok'd by: rwatson (1)
Requested by: scottl (2)
MFC after: 1 day
- Make it so one can't call db_setup_paging() if it has already been called
before. traceall needs this, or else the db_setup_paging() call from
db_trace_thread() will reset the printed line number, and override its
argument.
This is not perfect for traceall, because even if one presses 'q' while in
the middle of printing a backtrace it will finish printing the backtrace
before exiting, as db_trace_thread() won't be notified it should stop, but
it is hard to do better without reworking the pager interface a lot more.
threads. This is quite useful if generating a debug log for post-mortem
by another developer, in which case the person at the console may not
know which threads are of interest. The output of this can be quite
long.
Discussed with: kris
MFC after: 3 days
pointer doesn't point to the first instruction of that function, but
rather to a descriptor. The descriptor has the address of the first
instruction, as well as the value of the global pointer. The symbol
table doesn't know anything about descriptors, so if you lookup the
name of a function you get the address of the first instruction. The
cast from the address, which is the result of the symbol lookup, to a
function pointer as is done in db_fncall is therefore invalid.
Abstract this detail behind the DB_CALL macro. By default DB_CALL is
defined as db_fncall_generic, which yields the old behaviour. On ia64
the macro is defined as db_fncall_ia64, in which a descriptor is
constructed to yield a valid function pointer.
While here, introduce DB_MAXARGS. DB_MAXARGS replaces the existing
(local) MAXARGS. The DB_MAXARGS macro can be defined by platforms to
create a convenient maximum. By default this will be the legacy 10.
On ia64 we define this macro to be 8, for 8 is the maximum number of
arguments that can be passed in registers. This avoids having to
implement spilling of arguments on the memory stack.
Approved by: re (dwhite)
When a series of traces is included in a bug report, this will make it
easier to tie the trace information back to ps or threads output,
each of which will show the pid or the tid, but usually not both.
the thread ID and call db_trace_thread().
Since arm has all the logic in db_stack_trace_cmd(), rename the
new DB_COMMAND function to db_stack_trace to avoid conflicts on
arm.
While here, have db_stack_trace parse its own arguments so that
we can use a more natural radix for IDs. If the ID is not a thread
ID, or more precisely when no thread exists with the ID, try if
there's a process with that ID and return the first thread in it.
This makes it easier to print stack traces from the ps output.
requested by: rwatson@
tested on: amd64, i386, ia64
more generic, but that didn't actually happen. Since the feature to
switch backends (and historically this means from DDB to GDB) is
important, make sure people can do just that until such the generic
mechanism actually sees the light of day.
Suggested by: rwatson@
Most of the changes are a direct result of adding thread awareness.
Typically, DDB_REGS is gone. All registers are taken from the
trapframe and backtraces use the PCB based contexts. DDB_REGS was
defined to be a trapframe on all platforms anyway.
Thread awareness introduces the following new commands:
thread X switch to thread X (where X is the TID),
show threads list all threads.
The backtrace code has been made more flexible so that one can
create backtraces for any thread by giving the thread ID as an
argument to trace.
With this change, ia64 has support for breakpoints.
prototypes of cpu_halt(), cpu_reset() and swi_vm() from md_var.h to
cpu.h. This affects db_command.c and kern_shutdown.c.
ia64: move all MD prototypes from cpu.h to md_var.h. This affects
madt.c, interrupt.c and mp_machdep.c. Remove is_physical_memory().
It's not used (vm_machdep.c).
alpha: the MD prototypes have been left in cpu.h with a comment
that they should be there. Moving them is left for later. It was
expected that the impact would be significant enough to be done in
a seperate commit.
powerpc: MD prototypes left in cpu.h. Comment added.
Suggested by: bde
Tested with: make universe (pc98 incomplete)
callout when a specified number of lines have been output. This can be
used to implement pagers for ddb commands that output a lot of text. A
simple paging function is included that automatically rearms itself when
fired.
Reviewed by: bde, julian
(show thread {address})
Remove the IDLE kse state and replace it with a change in
the way threads sahre KSEs. Every KSE now has a thread, which is
considered its "owner" however a KSE may also be lent to other
threads in the same group to allow completion of in-kernel work.
n this case the owner remains the same and the KSE will revert to the
owner when the other work has been completed.
All creations of upcalls etc. is now done from
kse_reassign() which in turn is called from mi_switch or
thread_exit(). This means that special code can be removed from
msleep() and cv_wait().
kse_release() does not leave a KSE with no thread any more but
converts the existing thread into teh KSE's owner, and sets it up
for doing an upcall. It is just inhibitted from being scheduled until
there is some reason to do an upcall.
Remove all trace of the kse_idle queue since it is no-longer needed.
"Idle" KSEs are now on the loanable queue.
respects locks. Before SMPng, one was able to call psignal()
using the "call" command, but this is no longer possible because it
does not respect locks by itself. This is very useful when one has
gotten their machine into a state where it is impossible to spawn
ps/kill or su to root.
In this case, respecting locks essentially means trying to aquire the
proc lock before calling psignal(). We can't block in the debugger,
so if trylock fails, the operation fails. This also means that we
can't use pfind(), since that will attempt to lock the process for us.
Reviewed by: jhb
