The hardware is capable of 2 requestor endianness modes for standard 8
byte atomics: BE (0x0) and host endianness (0x1). Read the supported
modes from hca atomic capabilities and configure HW to host endianness
mode if supported.
Sponsored by: Mellanox Technologies
MFC after: 1 week
the coming ibcore and mlx5ib updates in order to support traffic redirection
to so-called raw ethernet QPs.
Remove unused E-switch related routines and files while at it.
Sponsored by: Mellanox Technologies
MFC after: 1 week
With the current state of the AENQ handlers in the ENA driver, only
implemented handlers should be indicated.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12872
Using only 1 descriptor on RX could be an issue, if system would be low
on resources and could not provide driver with large chunks of
contiguous memory.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12871
The device now provides driver with max available MTU value it
can handle.
The function setting MTU for the interface was simplified and reworked
to follow up this changes.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12870
The maximum number of io_cq was the same number as maximum io_sq
indicated by the device working in normal mode (without LLQ).
It is not always true, especially when LLQ is being enabled.
Fix it.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12869
The driver was printing out a lot of information upon failure, which
does not have to be interested for the user.
Changing logging level required to rebuild driver with proper flags. The
proper sysctl was added, so the level now can be changed dynamically
using bitmask.
Levels of printouts were adjusted to keep on mind end user instead of
debugging purposes.
More verbose messages were added to align the driver with the Linux.
Fix building error introduced by the r325506 by casting csum_flags to
uint64_t.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12868
This bug wasn't impacting anything, because both enums are indicating
the same value, but it could cause a problem on API change.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12867
The gcc compiler is more sensitive when variable is having an value
assigned, but it is not used anywhere further.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: rlibby
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12866
The previous way of checking for DF was not valid.
When DF is enabled, the DF bit should be 1.
The original way of checking it was wrong in 2 ways: first of all, it
was not checking for single bit, secondly, it was checking for 0.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12865
Remove unused macros and fields - some of them were only initialized,
without further usage.
Implement minor style fixes and add required comments.
On the occasion add missing TX completion counter, which was existing,
but mistakenly remained unused.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12864
The situation, where part of the MSI-x was not configured properly, was
not properly handled. Now, the driver reduces number of queues to
reflect number of existing and properly configured MSI-x vectors.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12863
Few counters were imported from the Linux driver and never used,
because of differences between the Linux and FreeBSD APIs.
Queue stops and resumes are no longer supported by the driver and
counters were incremented indicating false events.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: rlibby
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12862
The driver was using it in only few places, so the rest of the code
was covered with those statement.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: rlibby
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12861
* Change all conditional checks in "if" statement to boolean expressions
* Initialize variables with too complex values outside the declaration
* Fix indentations
* Move code associated with sysctls to ena_sysctl.c file
* For consistency, remove unnecesary "return" from void functions
* Use if_getdrvflags() function instead of accesing variable directly
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12860
Some goto tags were renamed for consistency, and few error handling
routines were reworked.
The drbr_free() must be locked just in case code will change in the
future - for now, it should never be an issue, because drbr is being
flushed in the ena_down() call, and the lock is required only when there
are some mbufs inside.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12859
On heavy load, when interrupt handling routine was slowed down, there
could appear memory corruption, because resources were destroyed and
interrupt was still being handled.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12858
Pure cosmetic change for better readability of the driver.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12857
In case when Rx ring is full and driver will fail to allocate Rx mbufs,
the ring could be stalled.
Keep alive is checking every second for Rx ring state, and if it is full
for two cycles, then trigger rx_cleanup routine in another thread.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12856
The RX out of order completion feature, allows to complete RX
descriptors out of order, by keeping trace of all free descriptors in
the separate array.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12855
- Fix clear doorbell queue buffer for ADAPTER_TYPE_B
- Fix release memory resource when detach device
- Add support for ARC-1216, 1226 SAS 12Gb controllers
- Declare some functions as static
- Change checking dword read/write for IOP rqbuffer.
Many thanks to Areca for continuing to support FreeBSD.
Submitted by: 黃清隆 <ching2048 areca com tw>
MFC after: 2 weeks
Summary:
Existing code recognizes the mcp7941x RTC, but this RTC has an
enable bit at the same location as the "Clock Halt" bit on the ds1307, with an
opposite assertion (set == on, whereas CH set == clock stopped). Thus the
current code halts the clock, with no way to enable it.
Reviewed By: ian
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12961
The function is in hot path of the driver (TX) and asking compiler for
making this function inline was changed for consistency and higher
readability.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: rlibby, byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12854
The patch contains following changes:
* In conditional checks, always check for NULL or 0 instead of negating values
* Use malloc and free explicitely, instead of ENA_MEM_FREE and ENA_MEM_FREE (the
dmadev passed to macro is never used, and could be a little misleading)
* Always check for NULL after calling malloc (few checks were missing)
* Rework naming of the goto tags in ena_attach() for consistency
* Fix error handling in ena_attach() - few goto instructions were leading to the
wrong tag
* Destroy MMIO req read request if attach failed
* Remove checking for NULL after calling malloc with M_WAITOK flag
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon.com, Inc.
Differential Revision: https://reviews.freebsd.org/D12853
will now prevent the driver from stripping vlan tags from packets.
PR: 219390
Submitted by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Reported by: Charles Goncalves <halfling@halfling.com.br>
Obtained from: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D12795
Use our ifm_list of supported media types rather than nested switch
statements to find the current media type. Find a supported type that
matches the current speed.
Remove all workarounds while updating ifmr->ifm_active.
For BNXT_IFMEDIA_ADD, added Three more speeds IFM_10G_T, IFM_2500_T & IFM_2500_KX.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed by: shurd, sbruno
Approved by: sbruno (mentor)
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D12896
Otherwise an orderly shutdown will initiate a watchdog that will cause
a 7 minute delayed reboot *by default*, In the freebsd.org cluster's case
this often worked out be a surprise reboot a minute or two after the
machine came back up.
costly PCI config space operations that slows down systems without the
hardware.
Many thanks to HighPoint for continued support of FreeBSD!
Submitted by: Steve Chang
Reported by: cperciva
MFC after: 2 weeks
sys/dev/mpr/mpr_mapping.c
If _mapping_process_dpm_pg0 detects inconsistencies in the drive
mapping table (stored in the HBA's NVRAM), abort reading it and
continue to boot as if the mapping table were blank. I observed
such inconsistencies in several HBAs after upgrading firmware from
14.0.0.0 to 15.0.0.0.
Reviewed by: slm
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D12901
Include ridx <-> rate conversion functions from rtwn(4) +
reuse already calculated value for ieee80211_radiotap(9).
Tested with Asus USB-N10, STA mode.
Some events can take sound pitch as a value so can not be represented
as binary on/off events. Tracking for on/off state is left in place
as it is a part of the evdev API.
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12676
- Do not report T-axis wheel events as button presses
- Reverse T-axis to match Linux
- Remove wrong comment. T-axis buttons state should be checked by level not
by edge to allow continuous wheel tilt reporting
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12676
w/o EVDEV_SUPPORT as it's value has no meaning in this case.
Now presence of this sysctl can be used for discovery if evdev support
for hybrid devices is compiled into kernel or not.
Hide "kern.evdev.sysmouse_t_axis" sysctl for the same reason.
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D12676
The r195005 unlocked pmc_sx before calling into pmclog_configure_log()
to avoid the LOR, but it allows flush or closelog to run in parallel
with the configuration, causing many failure modes.
Revert r195005. Pre-create the logging process, allowing it to run
after the set up succeeded, otherwise the process terminates itself.
Reported and tested by: pho
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D12882
