This makes the media check process asynchronous, so we no longer block
in cdstrategy() to check for media.
PR: 219857
Obtained from: ken
MFC after: 3 weeks
Even if we do not expect retries, we better be sure, since otherwise it
may result in use after free kernel panic. I've noticed that it retries
SCSI_STATUS_BUSY even with SF_NO_RECOVERY | SF_NO_RETRY.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
It allows to read and write block descriptors alike to mode page parameters.
It allows to change block size or short-stroke HDDs or overprovision SSDs.
Depenting on -P parameter the change can be either persistent or till reset.
In case of block size change device may need reformat after the setting.
In case of SSD overprovisioning format or sanitize may be needed to really
free the flash.
During implementation appeared that csio_encode_visit() can not handle
integers of more then 4 bytes, that makes 8-byte LBA handling awkward.
I had to split it into two 4-byte halves now.
MFC after: 1 week
Relnotes: yes
Sponsored by: iXsystems, Inc.
If not limited by write_same_max_lba option, split operation into several
2^^31 blocks chunks in a loop. For large disks it may take a while, so
setting write_same_max_lba may be useful to avoid timeouts.
While there, fix build with CAM_CTL_DEBUG.
MFC after: 2 weeks
The values to report can be set via LUN options. It can be useful for
testing, and also required for Drive Maintenance 2016 feature set.
MFC after: 2 weeks
CTL implements all defined feature sets except Drive Maintenance 2016,
which is not very applicable to such a virtual device, and implemented
only partially now. But may be it could be fixed later at least for
completeness.
MFC after: 2 weeks
ATA sanitize is functionally identical to SCSI, just uses different
initiation commands and status reporting mechanism.
While there, make kernel better handle sanitize commands and statuses.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
While for ATA disks resize is even more rare situation than for SCSI, it
may happen in case of HPA or AMA being used. Make ATA XPT report minor
IDENTIFY DATA change to upper layers with AC_GETDEV_CHANGED, and ada(4)
periph driver handle that event, recalculating all the disk properties and
signalling resize to GEOM. Since ATA has no mechanism of UNIT ATTENTIONs,
like SCSI, it has no way to detect that something has changed. That is why
this functionality depends on explicit reprobe via XPT_REPROBE_LUN call.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
In principle this should not matter as it's a union and they point to
the same memory location but based on the code above we should be
accessing .sata and not .ata.
Submitted by: arichardson
Reviewed by: scottl, imp
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D21002
AMA replaced HPA in ACS-3 specification. It allows to limit size of the
disk alike to HPA, but declares inaccessible data as indeterminate. One
of its practical use cases is to under-provision SATA SSDs for better
reliability and performance.
While there, fix HPA Security detection/reporting.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
This was added for emulation of Linux's CDROMSUBCHNL, but allows
users with read access to a cd(4) device to overwrite kernel memory
provided that the driver detects some media present.
Reimplement CDROMSUBCHNL by bouncing the data from CDIOCREADSUBCHANNEL
through the linux_cdrom_subchnl structure passed from userspace.
admbugs: 768
Reported by: Alex Fortune
Security: CVE-2019-5602
Security: FreeBSD-SA-19:11.cd_ioctl
Use the cam_ed copy of ata_params rather than malloc and freeing
memory for it. This reaches into internal bits of xpt a little, and
I'll clean that up later.
Create ata_param_fixup
Create a common fixup routine to do the canonical fixup of the
ata_param fixup. Call it from both the ATA and the ATA over SCSI
paths.
Go ahead and completely fix the ata_params before calling the veto
function. This breaks nothing that uses it in the tree since
ata_params is ignored in storvsc_ada_probe_veto which is the only
in-tree consumer.
NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.
Numerous posts to arch@ and other locations have found no actual users
for this software.
Relnotes: Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
Since SES specs do not define mechanism to map enclosure slots to SATA
disks, AHCI EM code I written many years ago appeared quite useless,
that always bugged me. I was thinking whether it was a good idea, but
if LSI HBAs do that, why I shouldn't?
This change introduces simple non-standard mechanism for the mapping
into both AHCI EM and SES code, that makes AHCI EM on capable controllers
(most of Intel's) a first-class SES citizen, allowing it to report disk
physical path to GEOM, show devices inserted into each enclosure slot in
`sesutil map` and `getencstat`, control locate and fault LEDs for specific
devices with `sesutil locate adaX on` and `sesutil fault adaX on`, etc.
I've successfully tested this on Supermicro X10DRH-i motherboard connected
with sideband cable of its S-SATA Mini-SAS connector to SAS815TQ backplane.
It can indicate with LEDs Locate, Fault and Rebuild/Remap SES statuses for
each disk identical to real SES of Supermicro SAS2 backplanes.
MFC after: 2 weeks
SES specifications tell: "The Additional Element Status descriptors shall
be in the same order as the status elements in the Enclosure Status
diagnostic page". It allows us to question ELEMENT INDEX that is lower
then values we already processed. There are many SAS2 enclosures with
this kind of problem.
While there, add more specific error messages for cases when ELEMENT INDEX
is obviously wrong. Also skip elements with INVALID bit set.
MFC after: 2 weeks
When some type has 0 elements, saved_individual_element_index was set
to -1 on second type bump, since individual_element_index was not
restored after the first. To me it looks easier just to increment
saved_individual_element_index separately than think when to save it.
MFC after: 2 weeks
Do not allocate temporary buffer for attributes we are going to return
as-is, just make sure to NUL-terminate them. Do not zero temporary 64KB
buffer for CDAI_TYPE_SCSI_DEVID, XPT tells us how much data it filled
and there are also length fields inside the returned data also.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Add cam_sim_alloc_dev() as a wrapper to cam_sim_alloc() which takes
a device_t instead of the unit_number (which we can derive from the
dev again).
Add device_t sim_dev to struct cam_sim. It will be used to pass through
the bus for cases when both sides of CAM speak newbus already and we want
to link them (yet make the calls through CAM for now).
SDIO will be the first consumer of this. For that make use of
cam_sim_alloc_dev() in sdhci under MMCCAM.
This will also allow people to start iterating more on the idea
to newbus-ify CAM without changing 50+ device drivers from the start.
Also to be clear there are callers to cam_sim_alloc() which do not
have a device_t (e.g., XPT) or provide their own unit number so we cannot
simply switch the KPI entirely.
Submitted by: kibab (original idea, see https://reviews.freebsd.org/D12467)
Reviewed by: imp, chuck
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19746
Differentiate between PCI Express Endpoint devices and Root Complex
Integrated Endpoints in the nda driver. The Link Status and Capability
registers are not valid for Integrated Endpoints and should not be
displayed. The bhyve emulated NVMe device will advertise as being an
Integrated Endpoint.
Reviewed by: imp
Approved byL imp (mentor)
Differential Revision: https://reviews.freebsd.org/D20282
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.
EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).
As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions. The remainder of the patch addresses
adding appropriate includes to fix those files.
LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).
No functional change (intended). Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed. __FreeBSD_version has been bumped.
According to specs and common sense, all sense data reported in descriptor
format should be valid. But practice shows different, some devices return
descriptors with invalid data, resulting in error messages looking worse.
Decouple block/stream commands sense data and information field printing.
Looking on present specs, there are much more cases when those fields are
not related, and incomplete old code was not printing valid sense data and
leaving empty lines for invalid.
MFC after: 2 weeks
SDIO command CMD53 (IO_RW_EXTENDED) allows data transfers using blocks of 1-2048 bytes,
with a maximum of 511 blocks per request.
Extend mmc_data structure to properly describe such requests,
and initialize the new fields in kernel and userland consumers.
No actual driver changes happen yet, these will follow in the separate changes.
Reviewed by: bz
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D19779
Before this I suppose it was impossible load CAM-based NVMe as module.
Plus this appeared to be needed to build r345815 without NVMe driver.
MFC after: 2 weeks
There is some code duplication in error handling paths in a few functions.
Create a function for printing such errors in human-readable way and get rid
of duplicates.
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D15912
Using DFLTPHYS/MAXPHYS is not always OK, instead make it possible for the
controller driver to provide maximum data size to MMCCAM, and use it there.
The old stack already does this.
Reviewed by: manu
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D15892
CAM IOCTL interfaces traditionally mapped user-space data buffers to KVA.
It was nice originally, but now it takes too much to handle respective
TLB shootdowns, while small kernel memory allocations up to 64KB backed
by UMA and accompanied by copyin()/copyout() can be much cheaper.
For large buffers mapping still may have sense, and unmapped I/O would
be even better, but the last unfortunately is more tricky, since unmapped
I/O API is too specific to struct bio now.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
The 16GB, 32GB and 128GB versions of this product all have the same
problem. For some reason, the RC10 size is correct, while the RC16
size is larger (oddly by the capacity size / 1024 bytes). Using the
RC16 size results in illegal LBA range errors when geom tastes the
device. So, expand the quirk to cover all versions of this chip.
Ideally, we'd get both READ CAPACITY 10 and READ CAPACITY 16 sizes and
print a warnnig if they differ and use the smaller of the two numbers,
though that may be problematical as well. Furthermore, SBC-4
encourages users transition to RC16 only, which suggests that in the
future RC10 may disappear from some drives. It's unclear how to cope
with these drives generically.
PR: 234503
MFC After: 1 week
Since in most configurations CTL serves as network service, we found
that this change improves local system interactivity under heavy load.
Priority of main threads is set slightly higher then worker taskqueues
to make them quickly sort incoming requests not creating bottlenecks,
while plenty of worker taskqueues should be less sensitive to latency.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Replace long per-LUN queue of blocked commands, scanned on each command
completion and sometimes even twice, causing up to O(n^^2) processing cost,
by much shorter per-command blocked queues, scanned only when respective
command completes, and check only commands before the previous blocker,
reducing cost to O(n).
While there, unblock aborted commands to make them "complete" ASAP to be
removed from the OOA queue and so not waste time ordering other commands
against them. Aborted commands that were not sent to execution yet should
have no visible side effects, so this is safe and easy optimization now,
comparing to commands already in processing, which are a still pain.
Together those two optimizations should fix quite pathological case, when
due to backend slowness CTL accumulated many thousands of blocked requests,
partially aborted by initiator and so supposedly not even existing, but
still wasting CTL CPU time.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
