Both deadline and current_time are time_seconds (+ utc_offset())
casted to unsigned long long. No need to cast to or print as pointers.
MFC after: 4 days
vm_page_startup uses MSGBUF_SIZE value for adding msgbuf pages to minidump.
If opt_msgbuf.h is not included and MSGBUF_SIZE is overriden in kernel
config, then not all msgbuf pages will be dumped. And most importantly,
struct msgbuf itself will not be included. Thus the dump would look
corrupted/incomplete to tools like kgdb, dmesg, etc that try to access
struct msgbuf as one of the first things they do when working on a crash
dump.
MFC after: 5 days
A make buildkernel -j4 uses ~360% CPU.
- Bracket the AP spinup printf with a mutex to avoid garbled output.
- Enable SMP by default on powerpc64.
Reviewed by: nwhitehorn
Add the BIO_ORDERED flag for struct bio and update bio clients to use it.
The barrier semantics of bioq_insert_tail() were broken in two ways:
o In bioq_disksort(), an added bio could be inserted at the head of
the queue, even when a barrier was present, if the sort key for
the new entry was less than that of the last queued barrier bio.
o The last_offset used to generate the sort key for newly queued bios
did not stay at the position of the barrier until either the
barrier was de-queued, or a new barrier (which updates last_offset)
was queued. When a barrier is in effect, we know that the disk
will pass through the barrier position just before the
"blocked bios" are released, so using the barrier's offset for
last_offset is the optimal choice.
sys/geom/sched/subr_disk.c:
sys/kern/subr_disk.c:
o Update last_offset in bioq_insert_tail().
o Only update last_offset in bioq_remove() if the removed bio is
at the head of the queue (typically due to a call via
bioq_takefirst()) and no barrier is active.
o In bioq_disksort(), if we have a barrier (insert_point is non-NULL),
set prev to the barrier and cur to it's next element. Now that
last_offset is kept at the barrier position, this change isn't
strictly necessary, but since we have to take a decision branch
anyway, it does avoid one, no-op, loop iteration in the while
loop that immediately follows.
o In bioq_disksort(), bypass the normal sort for bios with the
BIO_ORDERED attribute and instead insert them into the queue
with bioq_insert_tail(). bioq_insert_tail() not only gives
the desired command order during insertion, but also provides
barrier semantics so that commands disksorted in the future
cannot pass the just enqueued transaction.
sys/sys/bio.h:
Add BIO_ORDERED as bit 4 of the bio_flags field in struct bio.
sys/cam/ata/ata_da.c:
sys/cam/scsi/scsi_da.c
Use an ordered command for SCSI/ATA-NCQ commands issued in
response to bios with the BIO_ORDERED flag set.
sys/cam/scsi/scsi_da.c
Use an ordered tag when issuing a synchronize cache command.
Wrap some lines to 80 columns.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c
sys/geom/geom_io.c
Mark bios with the BIO_FLUSH command as BIO_ORDERED.
Sponsored by: Spectra Logic Corporation
MFC after: 1 month
to pad with 0xFF when it encounter short frames. According to RFC
1042 the pad bytes should be 0x00.
Because manual padding consumes extra CPU cycles, introduce a new
tunable which controls the padding behavior. Turning this tunable
on will have driver pad manually but it's disabled by default. Users
can enable software padding by setting the following tunable to
non-zero value.
dev.sis.%d.manual_pad="1"
PR: kern/35422 (patch not used)
prevented driver from working on big-endian machines. Also rewrite
station address programming to make it work on strict-alignment
architectures. With this change, sis(4) now works on sparc64 and
performance number looks good even though sis(4) have to apply
fixup code to align received frames on 2 bytes boundary on sparc64.
In protosw we define pr_protocol as short, while on the wire
it is an uint8_t. That way we can have "internal" protocols
like DIVERT, SEND or gaps for modules (PROTO_SPACER).
Switch ipproto_{un,}register to accept a short protocol number(*)
and do an upfront check for valid boundries. With this we
also consistently report EPROTONOSUPPORT for out of bounds
protocols, as we did for proto == 0. This allows a caller
to not error for this case, which is especially important
if we want to automatically call these from domain handling.
(*) the functions have been without any in-tree consumer
since the initial introducation, so this is considered save.
Implement ip6proto_{un,}register() similarly to their legacy IP
counter parts to allow modules to hook up dynamically.
Reviewed by: philip, will
MFC after: 1 week
response to DMA activate FIS under certain circumstances. This is
recommended fix from chip datasheet. If triggered, this bug most likely
cause write command timeout.
MFC after: 2 weeks
value 0xff. On hot-plug this value confuses ata_generic_reset() device
presence detection logic. As soon as we already know drive presence from
SATA hard reset, hint ata_generic_reset() to wait for device signature
until success or full timeout.
greater than 65535 bytes then the CDC driver might not work as expected, which
is not likely with the existing USB speeds.
Submitted by: Hans Petter Selasky
the file handle's size and was recently committed to
lib/libstand/nfs.c. This allows pxeboot to use NFSv3 and work
correcty for non-FreeBSD as well as FreeBSD NFS servers.
If built with OLD_NFSV2 defined, the old
code that predated this patch will be used.
Tested by: danny at cs.huji.ac.il
boot.nfsroot.nfshandlelen and set the diskless root fs to
use NFSv3 and this file handle length when it is set. If
this environment variable is not set, the diskless root fs
will use NFSv2 and the same defaults as before. This fixes
the problem where the diskless nfs root fs had to be on a
FreeBSD server for NFSv3 to work, because it did not know
the correct file handle length and assumed the size used
by FreeBSD. Until pxeboot and loader are replaced by ones
built from commits coming soon, boot.nfsroot.nfshandlelen
will not be set by them and the diskless root fs will use
NFSv2 unless the /etc/fstab entry has the "nfsv3" option
specified.
Tested by: danny at cs.huji.ac.il
MFC after: 2 weeks
allmulti is toggled. Controller does not require reinitialization.
This removes unnecessary controller reinitialization whenever
tcpdump is used.
While I'm here remove unnecessary variable reinitialization.
configured TX/RX MACs before getting a valid link. After that, when
link state change callback is called, it called device
initialization again to reconfigure TX/RX MACs depending on
resolved link state. This hack created several bad side effects and
it required more hacks to not collide with sis_tick callback as
well as disabling switching to currently selected media in device
initialization. Also it seems sis(4) was used to be a template
driver for long time so other drivers which was modeled after
sis(4) also should be changed.
TX/RX MACs are now reconfigured after getting a valid link. Fix for
short cable error is also applied after getting a link because it's
only valid when the resolved speed is 100Mbps.
While I'm here slightly reorganize interrupt handler such that
sis(4) always read SIS_ISR register to see whether the interrupt is
ours or not. This change removes another hack and make it possible
to nuke sis_stopped variable in softc.
thread in a racy manner, which can lead to attempting to migrate a
thread that is pinned to a CPU. Instead, have sched_switch() determine
which CPU a thread should run on if the current one is not allowed.
KASSERT in sched_bind() that the thread is not yet pinned to a CPU.
KASSERT in sched_switch() that only migratable threads or those moving
due to a sched_bind() are changing CPUs.
sched_affinity code came from jhb@.
MFC after: 2 weeks
- add rm_try_rlock().
- add RM_SLEEPABLE to use sx(9) as the back-end lock in order to sleep while
holding the write lock.
- change rm_noreadtoken to a cpu bitmask to indicate which CPUs need to go
through the lock/unlock in order to synchronize. As a side effect, this
also avoids IPI to CPUs without any readers during rm_wlock.
Discussed with: ups@, rwatson@ on arch@
Sponsored by: Isilon Systems, Inc.
o Enforce TX/RX descriptor ring alignment. NS data sheet says the
controller needs 4 bytes alignment but use 16 to cover both SiS
and NS controllers. I don't have SiS data sheet so I'm not sure
what is alignment restriction of SiS controller but 16 would be
enough because it's larger than the size of a TX/RX descriptor.
Previously sis(4) ignored the alignment restriction.
o Enforce RX buffer alignment, 4.
Previously sis(4) ignored RX buffer alignment restriction.
o Limit number of TX DMA segment to be used to 16. It seems
controller has no restriction on number of DMA segments but
using more than 16 looks resource waste.
o Collapse long mbuf chains with m_collapse(9) instead of calling
expensive m_defrag(9).
o TX/RX side bus_dmamap_load_mbuf_sg(9) support and remove
unnecessary callbacks.
o Initial endianness support.
o Prefer local alignment fixup code to m_devget(9).
o Pre-allocate TX/RX mbuf DMA maps instead of creating/destroying
these maps in fast TX/RX path. On non-x86 architectures, this is
very expensive operation and there is no need to do that.
o Add missing bus_dmamap_sync(9) in TX/RX path.
o watchdog is now unarmed only when there are no pending frames
on controller. Previously sis(4) blindly unarmed watchdog
without checking the number of queued frames.
o For efficiency, loaded DMA map is reused for error frames.
o DMA map loading failure is now gracefully handled. Previously
sis(4) ignored any DMA map loading errors.
o Nuke unused macros which are not appropriate for endianness
operation.
o Stop embedding driver maintained structures into descriptor
rings. Because TX/RX descriptor structures are shared between
host and controller, frequent bus_dmamap_sync(9) operations are
required in fast path. Embedding driver structures will increase
the size of DMA map which in turn will slow down performance.
