set of NetBSD software to compile as part of the FreeBSD build with
little or no modifiction. It is built as a static library and not
installed for general use. Likewise, its header files are not
installed.
Sponsored by: DARPA, AFRL
There is one known issue: Some probes will display an error message along the
lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different
binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect
problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
but committing it helps to get everyone on the same page and makes
sure we make progress.
Tinderbox breakages that are the result of this commit are entirely
the committer's fault -- in other words: buildworld testing on amd64
only.
Credits follow:
Submitted by: Garrett Cooper <yanegomi@gmail.com>
Sponsored by: Isilon Systems
Based on work by: keramida@
Thanks to: gnn@, mdf@, mlaier@, sjg@
Special thanks to: keramida@
GIANT from VFS. In addition, disconnect also netsmb, which is a base
requirement for SMBFS.
In the while SMBFS regular users can use FUSE interface and smbnetfs
port to work with their SMBFS partitions.
Also, there are ongoing efforts by vendor to support in-kernel smbfs,
so there are good chances that it will get relinked once properly locked.
This is not targeted for MFC.
GIANT from VFS. In addition, disconnect also netncp, which is a base
requirement for NWFS.
In the possibility of a future maintenance of the code and later
readd to the FreeBSD base, maybe we should think about a better location
for netncp. I'm not entirely sure the / top location is actually right,
however I will let network people to comment on that more specifically.
This is not targeted for MFC.
The NAND Flash environment consists of several distinct components:
- NAND framework (drivers harness for NAND controllers and NAND chips)
- NAND simulator (NANDsim)
- NAND file system (NAND FS)
- Companion tools and utilities
- Documentation (manual pages)
This work is still experimental. Please use with caution.
Obtained from: Semihalf
Supported by: FreeBSD Foundation, Juniper Networks
This tool changes the default buffering behaviour of standard
stdio streams.
It only works on dynamic binaries. To make it work for static
ones it would require cluttering stdio because there no single
entry point.
PR: 166660
Reviewed by: current@, jhb
Approved by: kib (mentor)
MFC after: 1 week
This library implements the C11 threads interface on top of the pthreads
library. As discussed on the lists, the preferred way to implement
this, is as a separate library.
It is unlikely that these functions will be used a lot in the future. It
would have been easier if the C11 working group standardized (a subset
of) pthreads and clock_nanosleep(). Having it as a separate library
allows the embedded people to omit it from their system.
Discussed on: arch@, threads@
not disabled in the usual way (by adding it to __DEFAULT_NO_OPTIONS in
share/mk/bsd.own.mk), and because the test for MK_LIBCPLUSPLUS in
Makefile.inc1 was incorrect.
Pointy hat to: dim
MK_LIBCPLUSPLUS=yes to enable). This is a work-in-progress. It works for
me, but is not guaranteed to work for anyone else and may eat your dog.
To build C++ using libc++, add -stdlib=libc++ to your CXX and LD flags.
Bug reports welcome, bug fixes even more welcome...
Approved by: dim (mentor)
vmm.ko - kernel module for VT-x, VT-d and hypervisor control
bhyve - user-space sequencer and i/o emulation
vmmctl - dump of hypervisor register state
libvmm - front-end to vmm.ko chardev interface
bhyve was designed and implemented by Neel Natu.
Thanks to the following folk from NetApp who helped to make this available:
Joe CaraDonna
Peter Snyder
Jeff Heller
Sandeep Mann
Steve Miller
Brian Pawlowski
file and processes information retrieval from the running kernel via sysctl
in the form of new library, libprocstat. The library also supports KVM backend
for analyzing memory crash dumps. Both procstat(1) and fstat(1) utilities have
been modified to take advantage of the library (as the bonus point the fstat(1)
utility no longer need superuser privileges to operate), and the procstat(1)
utility is now able to display information from memory dumps as well.
The newly introduced fuser(1) utility also uses this library and able to operate
via sysctl and kvm backends.
The library is by no means complete (e.g. KVM backend is missing vnode name
resolution routines, and there're no manpages for the library itself) so I
plan to improve it further. I'm commiting it so it will get wider exposure
and review.
We won't be able to MFC this work as it relies on changes in HEAD, which
was introduced some time ago, that break kernel ABI. OTOH we may be able
to merge the library with KVM backend if we really need it there.
Discussed with: rwatson
setting. It can be built by setting the WITH_ICONV knob. While this
knob is unset, the library part, the binaries, the header file and
the metadata files will not be built or installed so it makes no impact
on the system if left turned off.
This work is based on the iconv implementation in NetBSD but a great
number of improvements and feature additions have been included:
- Some utilities have been added. There is a conversion table generator,
which can compare conversion tables to reference data generated by
GNU libiconv. This helps ensuring conversion compatibility.
- UTF-16 surrogate support and some endianness issues have been fixed.
- The rather chaotic Makefiles to build metadata have been refactored
and cleaned up, now it is easy to read and it is also easier to add
support for new encodings.
- A bunch of new encodings and encoding aliases have been added.
- Support for 1->2, 1->3 and 1->4 mappings, which is needed for
transliterating with flying accents as GNU does, like "u.
- Lots of warnings have been fixed, the major part of the code is
now WARNS=6 clean.
- New section 1 and section 5 manual pages have been added.
- Some GNU-specific calls have been implemented:
iconvlist(), iconvctl(), iconv_canonicalize(), iconv_open_into()
- Support for GNU's //IGNORE suffix has been added.
- The "-" argument for stdin is now recognized in iconv(1) as per POSIX.
- The Big5 conversion module has been fixed.
- The iconv.h header files is supposed to be compatible with the
GNU version, i.e. sources should build with base iconv.h and
GNU libiconv. It also includes a macro magic to deal with the
char ** and const char ** incompatibility.
- GNU compatibility: "" or "char" means the current local
encoding in use
- Various cleanups and style(9) fixes.
Approved by: delphij (mentor)
Obtained from: The NetBSD Project
Sponsored by: Google Summer of Code 2009
libcompiler_rt.a is a BSD licensed C language runtime, which implements
many routines which are linked into binaries on architectures where
certain functionality is missing (e.g. 64 bits mul/div on i386).
Unfortunately, libcompiler_rt cannot replace libgcc entirely. Certain
features, such as an unwinder for exception handling, are missing.
That's why only libgcc.a is replaced for now, because this one does seem
to be complete.
Tested by: rene (amd64), nwhitehorn (powerpc), droso (i386 exprun)
and many others. Thanks!
Obtained from: user/ed/compiler-rt
MFC r207842:
Import of liblzma, xz, xzdec, lzmainfo from vendor branch
Add support for xz and lzma to lesspipe.sh (xzless, lzless)
MFC r207844:
Add two public headers missing in r207842
Adjust CFLAGS for lzmainfo, xz, xzdec
MFC r208099:
Add versioned symbols to liblzma
Use default SHLIB_MAJOR.
Approved by: delphij (mentor)
MFC r204738:
Remove stale references to libkrb5.
Rejigger the SUBDIR setting a smidge: we now set all the libraries that depend
on something else, and then SUBDIR+= the rest.
MFC r205113:
Make this conform to the other top-level Makefile subdir listings with
one file per line.
Approved by: delphij (mentor)
- Rework the wrapper support to check libpkg version as well as pkg_install
version.
- Add libfetch to _prebuild_libs.
- There are no new features introduced.
Notes: the API is not stable, so basically, do not use libpkg in your
projects for now. Also there's no manpage for libpkg yet, because the API
will change drastically. I repeat, do not use libpkg for now.
Rejigger the SUBDIR setting a smidge: we now set all the libraries that depend
on something else, and then SUBDIR+= the rest.
A separate commit will fix the SUBDIR style to be the same as the rest
of the tree.
framebuffer driver, etc. work on FreeBSD/amd64.
A significant amount of improvements were done by jkim@ during the recent
months to make vesa(4) work better, over the initial code import. This
work is based on OpenBSD's x86emu implementation and contributed by
paradox <ddkprog yahoo com> and swell.k at gmail com.
Hopefully I have stolen all their work to 8-STABLE :)
All bugs in this commit are mine, as usual.
This first commit brings 3 functions for enumerating, retrieving,
adding, removing and modifying EFI variables. The immediate use of these
include the insertion of a new boot option as part of the installation
process.
This library uses ioctl(2) requests implemented by io(4) to pass the
requests down through the kernel to EFI. These ioctl requests are only
implemented on ia64, so libefi is currently only enabled on ia64. The
interface is generic and io(4) on mad64/i386 can easily be taught to
handle these once EFI support has been added to the kernel there.
libulog now only provides functions that are used by various packages
from the ports tree, namely the libutempter ones. There is no reason to
link it into the crunch/fixit binaries anymore.
