Use xpt_done_direct in preference to xpt_done when completing a
successful I/O. Continue to use xpt_done when there's an error, or for
completion of the submission of a CCB. This eliminates a context
switch to the cam_doneq thread.
Sponsored by: Netflix
Suggested by: scottl@
parser.
This allows us to use the EROM parser API in cases where the standard bus
space I/O APIs are unsuitable. In particular, this will allow us to parse
the device enumeration table directly from bhndb(4) drivers, prior to
full attach and configuration of the bridge.
Approved by: adrian (mentor)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12510
Add bhnd(4) API for explicitly registering BHND platform devices (ChipCommon,
PMU, NVRAM, etc) with the bus, rather than walking the newbus hierarchy to
discover platform devices. These devices are now also refcounted; attempting
to deregister an actively used platform device will return EBUSY.
This resolves a lock ordering incompatibility with bwn(4)'s firmware loading
threads; previously it was necessary to acquire Giant to protect newbus access
when locating and querying the NVRAM device.
Approved by: adrian (mentor)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12392
IPV6_EXs in RSS never mean fragment. They mean:
"- Home address from the home address option in the IPv6 destination
options header. If the extension header is not present, use the
Source IPv6 Address.
- IPv6 address that is contained in the Routing-Header-Type-2 from
the associated extension header. If the extension header is not
present, use the Destination IPv6 Address."
UDP_IPV4_EX is an invalid RSS hash type, which will be removed.
Quoted from:
https://docs.microsoft.com/en-us/windows-hardware/drivers/network/rss-hashing-types#ndishashipv6ex
Reviewed by: erj
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D12450
UDP checksum offload does not work in Azure if following conditions are
met:
- sizeof(IP hdr + UDP hdr + payload) > 1420.
- IP_DF is not set in IP hdr
Use software checksum for UDP datagrams falling into this category.
Add two tunables to disable UDP/IPv4 and UDP/IPv6 checksum offload, in
case something unexpected happened.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D12429
GPUs: radeonkms, i915kms
NICs: if_em, if_igb, if_bnxt
This metadata isn't used yet, but it will be handy to have later to
implement automatic module loading.
Reviewed by: imp, mmacy
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12488
This change allows to just call sdhci_start_slot() in SDHCI drivers
and not to think about which stack handles the operation.
As a side effect, this will also fix MMCCAM with sdhci_acpi driver.
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D12471
out. Since it can't be paged out, it is never actually enqueued in a
paging queue. Nonetheless, passing PQ_INACTIVE to vm_page_unwire()
creates the appearance that the page "frame" is being enqueued in the
inactive queue. As of r288122, we can avoid this false impression by
passing PQ_NONE.
MFC after: 1 week
1) Choose correct Firmware options for HW LRO for best performance
2) Delete TBD and other comments which are not required.
3) Added sysctl interface to enable / disable / modify different factors
of HW LRO.
4) Disabled HW LRO by default to avoid issues with packet forwarding
This allows much better control over the LRO configuration via sysctls, and
uses much better defaults. Hardware LRO can now be enabled/disabled
independantly from the software LRO, and the tuning parameters are exposed.
manpage updates coming soon.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed by: shurd, sbruno
Approved by: sbruno (mentor)
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D12223
If the packet is smaller than MTU, disable the TSO flags.
Move TCP header parsing inside the IS_TSO?() test.
Add a new IFLIB_NEED_ZERO_CSUM flag to indicate the checksums need to be zeroed before TX.
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12442
- Use HWRM_FUNC_VF_CFG instead of HWRM_FUNC_CFG on VFs
- Fix NPAR/VF detection
- Clean up flag definitions
- Don't allow WoL on VFs
Although the bnxt driver doesn't support SR-IOV so can create VFs yet,
the PF could be running Linux or ESCi with a VF passed through to a
FreeBSD guest. This fixes the driver for that use case.
Submitted by: Siva Kallam <siva.kallam@@broadcom.com>
Reviewed by: shurd, sbruno
Approved by: sbruno (mentor)
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D12410
accepts PQ_NONE as the specified queue and returns a Boolean indicating
whether the page's wire count transitioned to zero. Use these features
in dev/drm2.
Reviewed by: kib, markj
MFC after: 1 week
1/4 of the number of queues times queue entries is too limiting. It
works up to about 4k IOPS / 3.0GB/s for hardware that can do
4.4k/3.2GB/s with nvd. 3/4 works better, though it highlights issues
in the fairness of nda's choice of TRIM vs READ. That will be fixed
separately.
In ql_hw_send() return EINVAL when TSO framelength exceeds max
supported length by HW.(davidcs)
2. ql_os.c:
In qla_send() call bus_dmamap_unload before freeing mbuf or
recreating dmmamap.(davidcs)
In qla_fp_taskqueue() Add additional checks for IFF_DRV_RUNNING
Fix qla_clear_tx_buf() call bus_dmamap_sync() before freeing
mbuf.
Submitted by:David.Bachu@netapp.com
MFC after:5 days
- Add size of an ethernet header to the value configured to NVS. This
does not seem to have any effects if MTU is 1500, but fix hypervisor
side's setting if MTU > 1500.
- Override the MTU setting according to the view from the hypervisor
side.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D12352
Since in Azure SYN and SYN|ACK go through the synthetic parts while the
rest of the same TCP flow goes through the VF, apply VF's RSS settings
to synthetic parts to have a consistent hash value/type for the same TCP
flow.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D12333
This was really too big of a commit even if everything worked, but there
are multiple new issues introduced in the one huge commit, so it's not
worth keeping this until it's fixed.
I'll work on splitting this up into logical chunks and introduce them one
at a time over the next week or two.
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
To optimize the case of ping-ponging between two buffers, the DDP code
caches the last two buffers used keeping the pages wired and page pods
stored in the NIC's RAM. If a new aio_read() request uses one of the
same buffers, then the work of holding pages, etc. can be avoided.
However, the starting virtual address of an aio buffer was not saved,
only the page count, length, and initial page offset. Thus, an
aio_read() request could match a different buffer in the address
space. (Earlier during development vm_fault_hold_quick_pages() was
always called and the vm_page_t values were compared, but that was
eventually removed without being adequately replaced.) Fix by storing
the starting virtual address and comparing that (along with other
fields) to determine if a buffer can be reused.
MFC after: 3 days
Sponsored by: Chelsio Communications
* Demote the level of several debug messages to CAM_DEBUG_TRACE
* Add detection for SDHC cards that can do 1.8V. No voltage switch sequence
is issued yet;
* Don't create a separate LUN for each SDIO function. We need just one to make
pass(4) attach;
* Remove obsolete mmc_sdio* files. SDIO functionality will be moved into the
separate device that will manage a new sdio(4) bus;
* Terminate probing if got no reply to CMD0;
* Make bcm2835 SDHCI host controller driver compile with 'option MMCCAM'.
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D12109
The bad_session, sglist_error, and process_error sysctl nodes were
returning the value of the pad_error node instead of the appropriate
error counters.
Sponsored by: Chelsio Communications
An eventual devd(8) or other component should be able to scan buses and
automatically load drivers that match device ids described in this metadata.
Reviewed by: imp
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12364
other kernel infrastructure changes.
Note that this doesn't affect the base cxgb(4) NIC driver for T3 at all.
MFC after: No MFC.
Sponsored by: Chelsio Communications
On some AMD FCH devices driven by intpm(4) (read: mine), the SMBus I/O port
range is split in two and the low range is only 0x10 wide. intpm(4) does
not access any registers above 0x0f, so there is no need for the wider
range.
Discussed with: avg
Sponsored by: Dell EMC Isilon
available, in i2c controller drivers that require interrupts for transfers.
This is the result of auditing all 22 existing drivers that attach iicbus.
These drivers were the only ones remaining that require interrupts and were
not using config_intrhook to defer attachment. That has led, over the
years, to various i2c slave device drivers needing to use config_intrhook
themselves rather than performing bus transactions in their probe() and
attach() methods, just in case they were attached too early.
The new IDs are taken from the hardware to which I have access
and from open datasheets.
Also, the hardware probing is moved to the device probe method.
Reviewed by: rpokala
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11730
