Commit Graph

28125 Commits

Author SHA1 Message Date
nwhitehorn
580e92a216 Reimplement fdt_intr_to_rl() in terms of OFW_BUS_MAP_INTR() and
OFW_BUS_CONFIG_INTR(). This function is only used by simplebus, so will
likely be moved there in the future.
2014-01-04 21:14:33 +00:00
br
156698294d ENET on Vybrid Family SoC don't advertise its media capabilities
themselves properly, so force auto-negotiation.

Tested on mvf600.

Reviewed by:	ian
2014-01-04 10:19:21 +00:00
sbruno
298f194182 Wrap this debug statement in debug defines. Else, this driver
will refuse to load.

MFC after:	2 weeks
Sponsored by:	Yahoo! Inc.
2014-01-03 20:45:56 +00:00
kevlo
f8e32f263b Add support for the MediaTek/Ralink RT3593 chipset.
Committed over the ZyXEL NWD2705 on amd64 with WPA.
2014-01-03 06:01:05 +00:00
imp
a7ae566647 Fill in some more info about the (somewhat old) Samsung parts I have
here...
2014-01-03 00:26:56 +00:00
imp
b94cd19d0d The HOT-E HL201 has 128MB Samsung SLC NAND, ID it properly. 2014-01-03 00:17:52 +00:00
adrian
aa67a2f114 Add an option to enable or disable the small RX packet copying that
is done to improve performance of small frames.

When doing RX packing, the RX copying isn't necessarily required.

Reviewed by:	np
2014-01-02 23:23:33 +00:00
zbb
541c54820f Revert r260165: Proper configuration of unmapped_buf_allowed should be used
To avoid failures in bus_dmamap_sync() on ARM unmapped_buf_allowed should
be set to 0. Hence, ARM-specific changes in AHCI should not be applied.
2014-01-02 11:24:04 +00:00
hselasky
f255244d0a Minor correction for the XHCI reset logic.
MFC after:	1 week
Found by:	Horse Ma <HMa@wyse.com>
2014-01-02 08:02:57 +00:00
imp
35f224ca28 Make the comment match the code. Not sure why we calculate it this
weird way, but didn't change that...
2014-01-02 02:20:10 +00:00
zbb
9c9582b429 Use only mapped BIOs on ARM
Using unmapped BIOs causes failure inside bus_dmamap_sync, since
this function requires valid MVA address, which is not present
if mapping is not set up.

Submitted by:	Wojciech Macek <wma@semihalf.com>
Obtained from:	Semihalf
2014-01-01 20:26:08 +00:00
zbb
2df622e3b7 Do not attach to PCI bridges in AHCI driver
Some vendors use the same VID:PID combination in AHCI and PCI bridge cards

Submitted by:	Wojciech Macek <wma@semihalf.com>
Obtained from:	Semihalf
2014-01-01 20:18:03 +00:00
emaste
597158b535 Increase vt(9) max glyph data to 1MB for CJK fonts with many glyphs
Sponsored by:	The FreeBSD Foundation
2014-01-01 19:38:15 +00:00
imp
d77ac8e0b5 Add support for Samsung K9F2G08U0A (256MiB SLC) NAND found on some old
Atmel boards I have.

# All Samsung, Toshiba and SanDisk parts will need to be in this table
# since they don't conform to the ONFI specification (they are all Toggle
# parts). There's some standards for the additional bytes so there's some hope
# to decode them automatically on a per-vendor basis, but even that has
# problems (and is what motivated the ONFI parameter page).
2013-12-31 07:36:39 +00:00
edavis
ee6c4eb4c8 For TSO, when the first mbuf contains both the packet header and data, the
header is split out into its own BD for processing by the firmware. When
this split occurred the data length in the BD was not being set correctly
resulting in packet corruption.

Approved by:	davidcd (mentor)
2013-12-30 23:02:26 +00:00
dim
8b46953761 In sys/dev/sound/pci/maestro.c, #if 0 two unused static functions.
MFC after:	3 days
2013-12-30 22:17:33 +00:00
delphij
f0e0e67980 Eliminate unused drbr_stats_update implementation in oce(4) driver.
Noticed by:	dim
MFC after:	2 weeks
2013-12-30 21:30:49 +00:00
marius
c8424575bd - Probe with BUS_PROBE_DEFAULT instead of 0.
- Remove clearing PCIM_CMD_INTxDIS; pci(4) will do that as appropriate since
  r189367.

MFC after:	1 week
2013-12-30 16:46:50 +00:00
trasz
379b2b0f9a Fix extremely slow operation with data digests enabled. This was caused
by receive code waiting for data digest even when the data segment was
empty.  It didn't actually read it, but it waited until those four bytes
become available in the socket buffer, i.e. until any other PDU (such as NOP)
came in.

PR:		kern/185240
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
2013-12-30 12:18:06 +00:00
marius
b7c33cee99 - Probe with BUS_PROBE_DEFAULT instead of 0.
- Nuke code setting PCI_POWERSTATE_D0; pci(4) already does that for type 0
  devices.
- There's no need to keep track of resource IDs.
- Quiesce the interrupt before actually detaching.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.

MFC after:	1 week
2013-12-29 23:46:59 +00:00
marius
fa8cc0558d - Probe with BUS_PROBE_DEFAULT instead of 0.
- Nuke code setting PCI_POWERSTATE_D0; pci(4) already does that for type 0
  devices.
- Use PCIR_BAR instead of a homegrown macro.
- There's no need to keep track of resource IDs.
- Quiesce the interrupt before actually detaching.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.

MFC after:	1 week
2013-12-29 23:05:01 +00:00
marius
1dce1c0785 - Probe with BUS_PROBE_DEFAULT instead of 0.
- Nuke code setting PCI_POWERSTATE_D0; pci(4) already does that for type 0
  devices.
- Use PCIR_BAR instead of a homegrown macro.
- There's no need to keep track of resource IDs.
- Quiesce the interrupt before actually detaching.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.
- Nuke dupe $FreeBSD$.

MFC after:	1 week
2013-12-29 22:56:05 +00:00
marius
eb35dbf436 - Add support for using MSI instead of INTx, controllable via the tunable
hw.ral.msi_disable (defaulting to using MSI).
- Probe with BUS_PROBE_DEFAULT instead of 0.
- Nuke code setting PCI_POWERSTATE_D0; pci(4) already does that for type 0
  devices.
- Use PCIR_BAR instead of a homegrown macro.
- There's no need to keep track of resource IDs.
- Release resources again in case attaching fails.
- Quiesce the interrupt before detaching.
- Sprinkle const.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.
- Trim headers.
- Nuke dupe $FreeBSD$.

MFC after:	1 week
2013-12-29 22:43:14 +00:00
marius
a6fa8f7ccf - Remove a redundant variable in mpt_pci_attach().
- #if 0 the currently unused paired port linking and unlinking of dual
  adapters.
- Simplify MSI/MSI-X allocation and release. For a single one, we don't need
  to fiddle with the MSI/MSI-X count and pci_release_msi(9) is smart enough
  to just do nothing in case of INTx.
- Canonicalize actions taken on attach failure and detach.
- Remove the remainder of incomplete support for older FreeBSD versions.

MFC after:	1 week
2013-12-29 20:41:32 +00:00
dim
6a5519caca In sys/dev/scc, remove unused static function scc_setmreg(). While
here, invoke scc_getmreg() in two more places where it can be used.

Reviewed by:	marcel
MFC after:	3 days
2013-12-29 20:23:08 +00:00
dim
a094e35450 In sys/dev/vxge/vxgehal/vxgehal-ring.c, #if 0 an unused static function.
MFC after:	3 days
2013-12-29 20:16:12 +00:00
dim
a2309c25c3 In sys/dev/usb/wlan/if_urtw.c, #if 0 a static const variable, which has
been unused since r198194.

MFC after:	3 days
2013-12-29 20:05:48 +00:00
dim
20873d832c In sys/dev/tpm/tpm.c, #if 0 an unused static function.
MFC after:	3 days
2013-12-29 19:55:06 +00:00
marius
10def325a4 - There's no need to keep track of resource IDs.
- Simplify MSI allocation and release. For a single one, we don't need to
  fiddle with the MSI count and pci_release_msi(9) is smart enough to just
  do nothing in case of INTx.
- Don't allocate MSI as RF_SHAREABLE.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.

MFC after:	1 week
2013-12-29 19:32:27 +00:00
marius
ba75bc0251 - Switch to using the common MII bitbang'ing code instead of duplicating it.
- Based on lessons learnt with dc(4) (see r185750), add bus space barriers to
  the MII bitbang read and write functions as well as to instances of page
  switching.
- Add missing locking to ed_ifmedia_{upd,sts}().
- Canonicalize some messages.
- Based on actual functionality, ED_TC5299J_MII_DIROUT should be rather named
  ED_TC5299J_MII_DIRIN.
- Remove unused headers.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.

MFC after:	1 week
2013-12-29 19:21:59 +00:00
emaste
3a4a183067 Clean up license text
- Renumber Regents clauses
- Remove clause 3 and 4 from TNF license, following upstream change
2013-12-29 18:44:12 +00:00
marius
98b4df3a23 - Simplify MSI allocation and release. For a single one, we don't need to
fiddle with the MSI count and pci_release_msi(9) is smart enough to just
  do nothing in case of INTx.
- Don't allocate MSI as RF_SHAREABLE.

MFC after:	1 week
2013-12-29 17:43:37 +00:00
marius
36c626f331 Free the MSI again on detach if allocated. Arguably, this code would be
better off living in aac_pci.c, but it doesn't seem worth creating a
aac_pci_detach() and it's also not the first PCI-specific bit in aac.c

MFC after:	3 days
2013-12-29 17:37:32 +00:00
dim
9d7eb446d0 Remove superfluous old-style rcsid[] from if_my.c. There is already an
__FBSDID() at the top of the file.

MFC after:	3 days
2013-12-29 17:03:45 +00:00
dim
7d3a725053 In sys/dev/mcd/mcd.c, mark the static const COPYRIGHT string as __used,
so it ends up in the object file, and no warnings are emitted about it
being actually unused.

MFC after:	3 days
2013-12-29 16:28:37 +00:00
dim
093756cfd4 In sys/dev/en/midway.c, #if 0 an unused static function.
MFC after:	3 days
2013-12-29 14:19:15 +00:00
dim
eca9b4cb85 Remove superfluous old-style rcsid[] from if_sk.c. There is already an
__FBSDID() at the top of the file.

MFC after:	3 days
2013-12-28 21:04:17 +00:00
adrian
369ddc1984 Fix the Intel 6150 support.
This chip doesn't require the temperature sensor offset, either v1 or
v2.  Doing so causes the initial calibration test to fail.

Tested:

* Intel Centrino 6150
2013-12-28 05:50:53 +00:00
kevlo
9b429fdd7f Add D-Link DWA-140 rev D1, another RT5372/run(4).
From Anton Mazunin.
2013-12-27 08:03:53 +00:00
dim
6fe6087b64 In sys/dev/bxe/bxe.c, remove static function bxe_has_tx_work_unload(),
which has never been used.

Reviewed by:	edavis
MFC after:	3 days
2013-12-26 22:42:11 +00:00
ray
44f33e00e6 Fix AltGr, we should not only skip RAlt key release if enable_altgr is set, but
also process RAlt key press same way.

Sponsored by:	The FreeBSD Foundation
2013-12-26 14:25:37 +00:00
luigi
87f03cf43b use the correct netmap <-> nic slot mapping on the transmit ring for 'lem'.
This bug would manifest only in netmap mode and on packets transmitted after
a NIC reset while netmap mode is active.

MFC after:	3 days
2013-12-26 05:22:38 +00:00
dim
d6a88245eb In sys/dev/drm/mach64_dma.c, remove static function mach64_set_dma_eol(),
which has never been used, even by upstream, since its initial upstream
commit (see http://cgit.freedesktop.org/mesa/drm/commit/?id=873e1c4d )

MFC after:	3 days
2013-12-26 00:11:19 +00:00
dim
ba9d17c848 In sys/dev/cxgb/ulp/tom/cxgb_cpl_io.c, remove static functions
mk_cpl_barrier_ulp(), mk_get_tcb_ulp() and mk_set_tcb_field_ulp(), which
are all unused since r237263.

MFC after:	3 days
2013-12-25 22:49:54 +00:00
dim
9e79a7bb47 In sys/dev/cxgb/common/cxgb_mc5.c, remove static function
dbgi_wr_addr3(), which is unused since r167514.

MFC after:	3 days
2013-12-25 22:45:33 +00:00
bz
94313c222c Bite the bullet and start removing the first compile time warnings
by removing unsued file local functions and then unused callees.
A lot more warnings to resolve but someone had to break the ice.

MFC after:	10 days
X-Comment:	I am not the new maintainer; chime in, it's ours.
2013-12-25 20:15:48 +00:00
ray
33f5bc114d Use statndard (syscons) way to disable bell.
Testesd by:	markj

Sponsored by:	The FreeBSD Foundation
2013-12-25 19:07:14 +00:00
dim
c0b8002234 In sys/dev/sym/sym_hipd.c, remove static functions sym_que_first(),
sym_que_last() and sym_remque_tail(), which are all unused since r53790.

MFC after:	3 days
2013-12-25 17:28:18 +00:00
dim
eaabb56fb3 In sys/dev/mwl/if_mwl.c, put the static RD4() function under #ifdef
MWL_DEBUG guards, since it only used in DPRINTF statements.

MFC after:	3 days
2013-12-25 14:48:27 +00:00
mjacob
258c0be375 Harvest one no longer used constant string.
Remove another and place it into play in the
normally ifdef protected zone it would be used
int.

Noticed by:	dim
2013-12-25 04:51:56 +00:00