obtained from OpenBSD with an algorithm suggested
by Amit Klein. The OpenBSD algorithm has a few
flaws; see Amit's paper for more information.
For a description of how this algorithm works,
please see the comments within the code.
Note that this commit does not yet enable random IP ID
generation by default. There are still some concerns
that doing so will adversely affect performance.
Reviewed by: rwatson
MFC After: 2 weeks
ipsec*_set_policy and do the privilege check only if needed.
Try to assimilate both ip*_ctloutput code blocks calling ipsec*_set_policy.
Reviewed by: rwatson
read socket buffers in shutdown() and close():
- Call socantrcvmore() before sblock() to dislodge any threads that
might be sleeping (potentially indefinitely) while holding sblock(),
such as a thread blocked in recv().
- Flag the sblock() call as non-interruptible so that a signal
delivered to the thread calling sorflush() doesn't cause sblock() to
fail. The sblock() is required to ensure that all other socket
consumer threads have, in fact, left, and do not enter, the socket
buffer until we're done flushin it.
To implement the latter, change the 'flags' argument to sblock() to
accept two flags, SBL_WAIT and SBL_NOINTR, rather than one M_WAITOK
flag. When SBL_NOINTR is set, it forces a non-interruptible sx
acquisition, regardless of the setting of the disposition of SB_NOINTR
on the socket buffer; without this change it would be possible for
another thread to clear SB_NOINTR between when the socket buffer mutex
is released and sblock() is invoked.
Reviewed by: bz, kmacy
Reported by: Jos Backus <jos at catnook dot com>
exposing them to all consumers of ip_fw.h. These structures are
used in both ipfw(8) and ipfw(4), but not part of the user<->kernel
interface for other applications to use, rather, shared
implementation.
MFC after: 3 days
Reported by: Paul Vixie <paul at vix dot com>
Introduce a new privilege allowing to set certain IP header options
(hop-by-hop, routing headers).
Leave a few comments to be addressed later.
Reviewed by: rwatson (older version, before addressing his comments)
while in principle a good idea, opened us up to a race inherrent to
the syncache's direct insertion of incoming TCP connections into the
"completed connection" listen queue, as it transpires that the socket
is inserted before the inpcb is fully filled in by syncache_expand().
The bug manifested with the occasional returning of 0.0.0.0:0 in the
address returned by the accept() system call, which occurred if accept
managed to execute tcp_usr_accept() before syncache_expand() had copied
the endpoint addresses into inpcb connection state.
Re-add tcbinfo locking around the address copyout, which has the effect
of delaying the copy until syncache_expand() has finished running, as
it is run while the tcbinfo lock is held. This is undesirable in that
it increases contention on tcbinfo further, but a more significant
change will be required to how the syncache inserts new sockets in
order to fix this and keep more granular locking here. In particular,
either more state needs to be passed into sonewconn() so that
pru_attach() can fill in the fields *before* the socket is inserted, or
the socket needs to be inserted in the incomplete connection queue
until it is actually ready to be used.
Reported by: glebius (and kris)
Tested by: glebius
drop the lock and then re-acquire it, revalidating TCP connection state
assumptions when we do so. This avoids a potential lock order reversal
(and potential deadlock, although none have been reported) due to the
inpcb lock being held over a page fault.
MFC after: 1 week
PR: 102752
Reviewed by: bz
Reported by: Václav Haisman <v dot haisman at sh dot cvut dot cz>
of two compares against 0. The negative effect of cache flushing
is probably more than the gain by not doing the two compares (the
value is almost certainly in register or at worst, cache).
Note that the uses of m_freem() are in error cases and m_freem()
handles NULL anyhow. So fast-path really isn't changed much at all.
free the MAC label on the inpcb before freeing the inpcb.
MFC after: 3 days
Submitted by: tanyong <tanyong at ercist dot iscas dot ac dot cn>,
zhouzhouyi
When system ticks are positive, for entries in the cache
bucket, syncache_timer() ran on every tick (doing nothing
useful) instead of the supposed 3, 6, 12, and 24 seconds
later (when it's time to retransmit SYN,ACK).
When ticks are negative, syncache_timer() was scheduled
for the too far future (up to ~25 days on systems with
HZ=1000), no SYN,ACK retransmits were attempted at all,
and syncache entries added in that period that correspond
to non-established connections stay there forever.
Only HEAD and RELENG_7 are affected.
Reviewed by: silby, kmacy (earlier version)
Submitted by: Maxim Dounin, ru
- Rename output routines tcp_gen_* -> tcp_output_*.
- Rename notification routines that turn in to no-ops in the absence of TOE
from tcp_gen_* -> tcp_offload_*.
- Fix some minor comment nits.
- Add a /* FALLTHROUGH */
Reviewed by: Sam Leffler, Robert Watson, and Mike Silbersack
- rename tcp_ofld.[ch] to tcp_offload.[ch]
- document usage and locking conventions of the functions in the
toe_usrreqs function vector
- document tcpcb, inpcb, and socket fields used by toe
- widen the listen interface into 2 functions
- rename DISABLE_TCP_OFFLOAD to TCP_OFFLOAD_DISABLE
- shrink conditional compilation to reduce the likelihood of bitrot
- replace sc->sc_toepcb checks in tcp_syncache.c with TOEPCB_ISSET
- make neccessary changes to release offload resources when a syncache
entry is removed before connection establishment
- disable checks for offloaded connection where insufficient information
is available
Reviewed by: silby
header, then don't try to pullup anything, because there is no next
header if we hit IPPROTO_NONE. Set ulp to a non-NULL value so the
search for an upper layer header terinates.
This is based on Pekka's diagnosis, but I chose a simpler fix.
PR: 115261
Submitted by: Pekka Savola <pekkas@netcore.fi>
Reviewed by: mlaier
MFC after: 2 weeks
the sent_queue. Sometimes I wonder why any code
ever works :-)
- Fix the pad of the last mbuf routine, It was working improperly
on non-4 byte aligned chunks which could cause memory overruns.
MFC after: 1 week
- Missing lock when sending data and moving it to the
outqueue.
- If a mbuf alloc fails during moving to outqueue the
reassembly of the old mbuf chain was incorrect.
- some_taken becomes a counter in sctputil.c instead of a set to 1.
- Fix a panic to be only under invarients and have a proper recovery.
- msg_flags needed to be set.to the value collected not or'd.
MFC after: 1 week
test incorrect.
- Fix the initial buf calculation to be more friendly, calc is the same
but we use different variable to make it easier amongst the different
code versions.
MFC after: 1 week
sending, once the locks are all unlocked to
do the copy's in, its possible that other
events could then raise the number of bytes
outstanding pushing it so not all the message
would fit. This would then cause us to send
only part of the message. This fix makes it
so we keep a "reserved" amount that can be
kept in mind when making calculations to send.
- rcv msg args with a NULL/NULL for to/tolen will return an error incorrectly
for the 1-2-1 model.
- We were not doing 0 len return correctly and not setting cantrcv more
correctly. Previouly we "fixed" this area by taking out the socantrcv
since we then could not get the data out. The correct rix is to still
flag the socket but alow a by-pass route to continue to read until
all data is consumed.
MFC after: 1 week
Before this fix, FreeBSD would negotiate SACK on outgoing
connections, but would always fail to negotiate it on incoming
connections.
Discovered by: James Healy and Lawrence Stewart
Submitted by: James Healy and Lawrence Stewart
MFC after: 3 days
1. A packet comes in that is to be forwarded
2. The destination of the packet is rewritten by some firewall code
3. The next link's MTU is too small
4. The packet has the DF bit set
Then the current code is such that instead of setting the next
link's MTU in the ICMP error, ip_next_mtu() is called and a guess
is sent as to which MTU is supposed to be tried next. This is because
in this case ip_forward() is called with srcrt set to 1. In that
case the ia pointer remains NULL but it is needed to get the MTU
of the interface the packet is to be sent out from.
Thus, we always set ia to the outgoing interface.
MFC after: 2 weeks
in the tcp header. With relevant parts of the tcp header changing after
the 'signature' was computed, the signature becomes invalid.
Reviewed by: tools/regression/netinet/tcpconnect
MFC after: 3 days
Tested by: Nick Hilliard (see net@)
