"df", "rf" and "offset". This allows to match on specific
bits of ip_off field.
For compatibility reasons lack of keyword means "offset".
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D26021
libifconfig_sfp.h provides an API in libifconfig for querying SFP module
properties, operational status, and vendor strings, as well as descriptions
of the various fields, string conversions, and other useful helpers for
implementing user interfaces.
SFP module status is obtained by reading registers via an I2C interface.
Descriptions of these registers and the values therein have been collected
in a Lua table which is used to generate all the boilerplace C headers and
source files for accessing these values, their names, and descriptions.
The generated code is fully commented and readable.
This is the first use of libifconfig in ifconfig itself. For now, the
scope remains very limited. Over time, more of ifconfig will be replaced
with libifconfig.
Some minor changes to the formatting of ifconfig output have been made:
- Module memory hex dumps are indented one extra space as a result of using
hexdump(3) instead of a bespoke hex dump function.
- Media descriptions have an added two-character short-name in parenthesis.
- QSFP modules were incorrectly displaying TX bias current as power. Now
TX channels display bias current, and this change has been made for both
SFP and QSFP modules for consistency.
A Lua binding for libifconfig including this functionality is implemented
but has not been included in this commit. The plan is for it to be
committed after dynamic module loading has been enabled in flua.
Reviewed by: kp, melifaro
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25494
Add IEEE80211_IOC_IC_NAME to query the ic_name field and in ifconfig
to print the parent interface again. This functionality was lost
around r287197. It helps in case of multiple wlan interfaces and
multiple underlying hardware devices to keep track which wlan
interface belongs to which physical device.
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
Reviewed by: adrian, Idwer Vollering
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25832
Enhance camcontrol(8) so that it's possible to manually set frequency for SD/MMC cards.
While here, display more information about the current controller, such as
supported operating modes and VCCQ voltages, as well as current VCCQ voltage.
Reviewed by: manu
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D25795
Add tests to cover "add", "change" and "delete" functionality of /sbin/route
for ipv4 and ipv6. These tests for the existing route tool are the first step
towards creating libroute.
Submitted by: Ahsan Barkati
Sponsored by: Google, Inc. (GSoC 2020)
Reviewed by: kp, thj
Approved by: bz (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D25220
Those rules have been broken at least since 8-STABLE, when the port
providing the ezdownload binary was removed (misc/ezload).
Reviewed by: kevans, imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25686
This is mostly an exercise to set variables to NULL/0 when declared, but
one was ensuring a string variable was set before printing it.
We should never see "<unknown>" in a printed rule; if we do then this code
definitely has some bugs that need addressing.
struct _ipfw_dyn_rule is defined as packed, and as a result, its
uint64_t fields are misaligned on some 32-bit platforms. Since
pr_u64() is explicitly supposed to handle this case, avoid using a
uint64_t * for the input pointer to make sure that the compiler won't
(correctly) warn about the misalignment.
Reported by: jenkins
MFC with: r363164
Provide hints to direct people towards gptzfsboot, zfsbootcfg, efibootmgr, etc
PR: 199103
MFC after: 2 weeks
Sponsored by: Klara Inc.
Event: July 2020 Bugathon
sectors.
On my SanDisk Cruzer Blade 16GB USB stick this made formatting much faster:
x before
+ after
+--------------------------------------------------------------------------+
|+ |
|+ x |
|+ x x|
|A MA||
+--------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 3 15.89 16.38 16 16.09 0.2570992
+ 3 0.32 0.37 0.35 0.34666667 0.025166115
Difference at 95.0% confidence
-15.7433 +/- 0.414029
-97.8455% +/- 0.25668%
(Student's t, pooled s = 0.182665)
Reviewed by: emaste
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24508
The new function operates similarly to ifconfig_lagg_get_lagg_status and
likewise is accompanied by a function to free the bridge status data structure.
I have included in this patch the relocation of some strings describing STP
parameters and the PV2ID macro from ifconfig into net/if_bridgevar.h as they
are useful for consumers of libifconfig.
Reviewed by: kp, melifaro, mmacy
Approved by: mmacy (mentor)
MFC after: 1 week
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25460
dumpon has accepted device names without the prefix ever since r291207.
Since dumpon and savecore are always paired, they ought to accept the same
arguments. Prior to this change, specifying 'dumpdev="da3"' in
/etc/rc.conf, for example, would result in dumpon working just fine but
savecore complaining that "Dump device does not exist".
PR: 247618
Reviewed by: cem, bcr
MFC after: 2 weeks
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D25500
Switch to the simplified while loop suggest by Aaron LI
Post commit review via: https://reviews.freebsd.org/rS301185#inline-232
Submitted by: Aaron LI <aly@aaronly.me>
Sponsored by: Klara Inc.
The change from "slave" processes to "minion" processes to "worker"
processes left some less-than-coherent names:
1. "enslave" turned into the ungrammatical "enworker".
2. "slp" (SLave Pointer) turned into "mlp" (Minion [L] Pointer?).
Convert "enworker" to "create_workers" (the function in question forks
off 3 worker processes), and replace "mlp" with "wp" (Worker Pointer)
and "tmlp" with "twp" (Temporary Worker Pointer).
Reviewed by: imp, cem, danfe
Differential Revision: https://reviews.freebsd.org/D25403
- Fix formatting issues such as:
- Use Ql instead of Dq Li as Li is deprecated
- Address some mandoc warnings
- Add arguments missing from the list of options (i.e., document "-k keep"
instead of just "-k").
- Document that -k and -s can be specified multiple times
- Use sshd instead of named for the example in the BUGS section, as named
is not in the base system. Also, use Nm instead of Xr there as it is not
the sshd binary that is required to be running, but the service.
- Use Sy instead of Cm for KEYWORDS. Cm is reserved for command-line
modifiers of the CLI.
- Add an EXAMPLES section
- Cross-reference service(8).
MFC after: 2 weeks
Previously, the -p and -c flags were ignored when reading from stdin
Additionally, -s and -c can be used together now.
PR: 247295
Reviewed by: kevans
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25362
fs_summary_info structure. This change was originally done
by the CheriBSD project as they need larger pointers that
do not fit in the existing superblock.
This cleanup of the superblock eases the task of the commit
that immediately follows this one.
Suggested by: brooks
Reviewed by: kib
PR: 246983
Sponsored by: Netflix
r286700 added the "lacp_fast_timeout" option to `ifconfig', but we forgot to
include the new option in the string used to decode the option bits. Add
"LACP_FAST_TIMO" to LAGG_OPT_BITS.
Also, s/LAGG_OPT_LACP_TIMEOUT/LAGG_OPT_LACP_FAST_TIMO/g , to be clearer that
the flag indicates "Fast Timeout" mode.
Reported by: Greg Foster <gfoster at panasas dot com>
Reviewed by: jpaetzel
MFC after: 1 week
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D25239
x86 boot uses loader(8) and the boot2-direct-to-kernel process is not
supported. Remove the documentation, which doesn't document a working
process and leads to confusion.
PR: 247074
Reported by: Alex K.
vfs.zfs.boot.primary_pool is only set on BIOS boot, use vfs.root.mountfrom
instead and update all vdevs on pool.
Reviewed by: allanjude
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25103
At this point, AES is the more common name for Rijndael128. setkey(8)
will still accept the old name, and old constants remain for
compatiblity.
Reviewed by: cem, bcr (manpages)
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24964
A logic bug in remove_protocol() meant that it would remove (leak) all
structures in the list preceding the one intended for removal.
PR: 245971
Submitted by: joost@jodocus.org (original version)
MFC after: 1 week
Now options -g/-G allow to select/unselect interfaces by groups
in the "ifconfig -a" output just like already existing -d/-u.
Examples:
to exclude loopback from the list: ifconfig -a -G lo
to show vlan interfaces only: ifconfig -a -g vlan
to show tap interfaces that are up: ifconfig -aug tap
Arguments to -g/-G may be shell patterns and both may be specified.
Later options -g/-G override previous ones.
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25029
