Pass the structure offset in arg2 instead of arg1. This avoids
having to undo the pointer arithmetic on arg1. Instead arg2 can
be used directly as an offset relative to the desired structure.
Reviewed by: cy
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27961
It changed the #pinctrl-cells value to be equal to 2 and the macro
that generates the values.
Based on the bindings docs a value of 2 is only acceptable if the node
used pinctrl-single,bits and not pinctrl-single,pins
This allow booting further on the beaglebone black with 5.9 DTS
This change introduces loadable fib lookup modules based on
DPDK rte_lpm lib targeted for high-speed lookups in large-scale tables.
It is based on the lookup framework described in D27401.
IPv4 module is called dpdk_lpm4. It wraps around rte_lpm [1] library.
This library implements variation of DIR24-8 [2] lookup algorithm.
Module provide lockless route lookups and in-place incremental updates,
allowing for good RIB performance.
IPv6 module is called dpdk_lpm6. It wraps around rte_lpm6 [3] library.
Implementation can be seen as multi-bit trie where the stride or number of bits
inspected on each level varies from level to level.
It can vary from 1 to 14 memory accesses, with 5 being the average value
for the lengths that are most commonly used in IPv6.
Module provide lockless route lookups for global unicast addresses
and in-place incremental updates, allowing for good RIB performance.
Implementation details:
* wrapper code lives in `sys/contrib/dpdk_rte_lpm/dpdk_lpm[6].c`.
* rte_lpm[6] implementation contains both RIB and FIB code.
. RIB ("rule_") code, backed by array of hash tables part has been commented out,
as base radix already provides all the necessary primitives.
* link-local lookups are currently implemented as base radix lookup.
This part should be converted to something like read-only radix trie.
Usage detail:
Compile kernel with option FIB_ALGO and load dpdk_lpm4/dpdk_lpm6
module at any time. They will be picked up automatically when
amount of routes raises to several thousand.
[1]: https://doc.dpdk.org/guides/prog_guide/lpm_lib.html
[2]: http://yuba.stanford.edu/~nickm/papers/Infocom98_lookup.pdf
[3]: https://doc.dpdk.org/guides/prog_guide/lpm6_lib.html
Differential Revision: https://reviews.freebsd.org/D27412
POSIX O_DSYNC means that writes include an implicit fdatasync(2), just
as O_SYNC implies fsync(2).
VOP_WRITE() functions that understand the new IO_DATASYNC flag can act
accordingly, but we'll still pass down IO_SYNC so that file systems that
don't understand it will continue to provide the stronger O_SYNC
behaviour.
Flag also applies to fcntl(2).
Reviewed by: kib, delphij
Differential Revision: https://reviews.freebsd.org/D25090
Fix non-FreeBSD CI build after v1.4.8. This definition was only used in
zstd(1), which isn't part of non-FreeBSD CI (I guess). The ifdef was
added in v1.4.5 import.
Upstream does not currently support shared-linked zstd(1), but I have
proposed https://github.com/facebook/zstd/pull/2450 . If that is
adopted, we can add -DZSTD_PROGRAMS_LINK_SHARED to our libzstd build and
drop some diffs.
Reported by: uqs
lua: avoid gcc -Wreturn-local-addr bug
Avoid a bug with gcc's -Wreturn-local-addr warning with some
obfuscation. In buggy versions of gcc, if a return value is an
expression that involves the address of a local variable, and even if
that address is legally converted to a non-pointer type, a warning may
be emitted and the value of the address may be replaced with zero.
Howerver, buggy versions don't emit the warning or replace the value
when simply returning a local variable of non-pointer type.
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90737
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Libby <rlibby@FreeBSD.org>
Closes#11337
spa: avoid type narrowing warning
Building the spa module for i386 caused gcc to emit
-Wint-to-pointer-cast "cast to pointer from integer of different size"
because spa.spa_did was uint64_t but pthread_join (via thread_join in
spa_deactivate) takes a pointer (32-bit on i386). Define spa_did to be
pointer-size instead. For now spa_did is in fact never non-zero and the
thread_join could instead be ifdef'd out, but changing the size of
spa_did may be more useful for the future.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Libby <rlibby@FreeBSD.org>
Closes#11336
FreeBSD libzfs: gcc requires __thread after static
Building libzfs with gcc on FreeBSD failed because gcc is picky about
the order of keywords in declarations with __thread, whereas clang is
more relaxed.
https://gcc.gnu.org/onlinedocs/gcc/Thread-Local.html
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ryan Libby <rlibby@FreeBSD.org>
Closes#11331
Fix compiling on FreeBSD + gcc - don't assume illmnos bits
This looks like it was once from the illumnos compat code.
FreeBSD doesn't have cmn_err as a compiler format attribute, so
it definitely errors out.
It doesn't show up on LLVM because it doesn't trigger at all.
Add in the format flags but keep them behind #if 0 for now;
there are too many format issues that trigger when one does
format checking in the shared code.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: adrian chadd <adrian@freebsd.org>
Closes#11068Closes#11069
Fix pointer-is-uint64_t-sized assumption in the ioctl path
This shows up when compiling freebsd-head on amd64 using gcc-6.4.
The lib32 compat build ends up tripping over this assumption.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: adrian chadd <adrian@freebsd.org>
Closes#11068Closes#11069
Replace MAXPHYS by runtime variable maxphys. It is initialized from
MAXPHYS by default, but can be also adjusted with the tunable kern.maxphys.
Make b_pages[] array in struct buf flexible. Size b_pages[] for buffer
cache buffers exactly to atop(maxbcachebuf) (currently it is sized to
atop(MAXPHYS)), and b_pages[] for pbufs is sized to atop(maxphys) + 1.
The +1 for pbufs allow several pbuf consumers, among them vmapbuf(),
to use unaligned buffers still sized to maxphys, esp. when such
buffers come from userspace (*). Overall, we save significant amount
of otherwise wasted memory in b_pages[] for buffer cache buffers,
while bumping MAXPHYS to desired high value.
Eliminate all direct uses of the MAXPHYS constant in kernel and driver
sources, except a place which initialize maxphys. Some random (and
arguably weird) uses of MAXPHYS, e.g. in linuxolator, are converted
straight. Some drivers, which use MAXPHYS to size embeded structures,
get private MAXPHYS-like constant; their convertion is out of scope
for this work.
Changes to cam/, dev/ahci, dev/ata, dev/mpr, dev/mpt, dev/mvs,
dev/siis, where either submitted by, or based on changes by mav.
Suggested by: mav (*)
Reviewed by: imp, mav, imp, mckusick, scottl (intermediate versions)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D27225
* Use the new API of ena_trace_*
* Fix typo syndrom --> syndrome
* Remove validation of the Rx req ID (already performed in the ena-com)
* Remove usage of deprecated ENA_ASSERT macro
Submitted by: Ido Segev <idose@amazon.com>
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27115
The latest generation hardware requires IO CQ (completion queue)
descriptors memory to be aligned to a 4K. It needs that feature for
the best performance.
Allocating unaligned descriptors will have a big performance impact as
the packet processing in a HW won't be optimized properly. For that
purpose adjust ena_dma_alloc() to support it.
It's a critical fix, especially for the arm64 EC2 instances.
Submitted by: Ido Segev <idose@amazon.com>
Obtained from: Amazon, Inc
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27114
They are only there to provide less innacurate statistics for debuggers.
However, this is quite heavy-weight and instead it would be better to
teach debuggers how to obtain the necessary information.
This deduplicates 2 sets of caches using the same sizes.
Memory savings fluctuate a lot, one sample result is buildworld on zfs
saving ~180MB RAM in reduced page count associated with zio caches.
The ZIL will be opened on the first write, not earlier.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mariusz Zaborski <oshogbo@vexillium.org>
OpenZFS Pull Request: https://github.com/openzfs/zfs/pull/11152
PR: 250934
My script to convert git commits to svn patch does not handle binary
files correctly, and r367387 committed a set of empty files as a result.
MFC with: r367387
Sponsored by: Rubicon Communications, LLC (Netgate)
lz4 port from illumos to Linux added a 16KB per-CPU cache to accommodate for
the missing 16KB malloc. FreeBSD supports this size, making the extra cache
harmful as it can't share buckets.
The use of atomic_sub_64() in zfs_zstd.c was breaking the 32-bit build on
platforms without native 64-bit atomics due to atomic_sub_64() not being
available, and no fallback being provided in _STANDALONE.
Provide a standalone stub to match atomic_add_64() using simple math.
While this is not actually atomic, it does not matter in libsa context,
since it always runs single-threaded and does not run under a scheduler.
Reviewed by: mjg (in email)
This applies:
commit c4ede65bdfca11b532403620bbf0d6e33f0c1c1d
Author: Mateusz Guzik <mjguzik@gmail.com>
Date: Fri Oct 30 23:26:10 2020 +0100
zstd: track allocator statistics
Note that this only tracks sizes as requested by the caller.
Actual allocated space will almost always be bigger (e.g., rounded up to
the next power of 2 or page size). Additionally the allocated buffer may
be holding other areas hostage. Nonetheless, this is a starting point
for tracking memory usage in zstd.
from openzfs
Foundation copyrights, approved by emaste@. It does not include
files which carry other people's copyrights; if you're one
of those people, feel free to make similar change.
Reviewed by: emaste, imp, gbe (manpages)
Differential Revision: https://reviews.freebsd.org/D26980
hese kstats are often expensive to compute so we want to avoid them
unless specifically requested.
The following kstats are affected by this change:
kstat.zfs.${pool}.multihost
kstat.zfs.${pool}.misc.state
kstat.zfs.${pool}.txgs
kstat.zfs.misc.fletcher_4_bench
kstat.zfs.misc.vdev_raidz_bench
kstat.zfs.misc.dbufs
kstat.zfs.misc.dbgmsg
PR: 249258
Reported by: mjg
Reviewed by: mjg, allanjude
Obtained from: https://github.com/openzfs/zfs/pull/11099
Sponsored by: iXsystems, Inc.
- fix panic due to tqid overflow
- Improve libzfs_error_init messages
- Expose zfetch_max_idistance tunable
- Make dbufstat work on FreeBSD
- Fix EIO after resuming receive of new dataset over an existing one
Some vnodes come with a hack which inherits the fplookup flag despite having vops
which don't provide the routine.
Reported by: YAMAMOTO Shigeru <shigeru@os-hackers.jp>
The 32-bit counter eventually wraps to 0 which is a sentinel for invalid
id.
Make it 64-bit on LP64 platforms and 0-check otherwise.
Note: Linux counterpart uses id stored per queue instead of a global.
I did not check going that way is feasible with the goal being the
minimal fix doing the job.
Reported by: YAMAMOTO Shigeru <shigeru@os-hackers.jp>
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D26759
Add support to the _STANDALONE environment enough bits of the kernel
that we can compile it. We still have a small zstd_shim.c since there
were 3 items that were a bit hard to nail down and may be cleaned up
in the future. These go hand in hand with a number of commits to
sys/sys in the past weeks, should this need be MFCd.
Discussed with: mmacy (in review and on IRC/Slack)
Reviewed by: freqlabs (on openzfs repo)
Differential Revision: https://reviews.freebsd.org/D26218
Dynamically created OIDs automatically get this flag set.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D26561
- Annotate FreeBSD sysctls with CTLFLAG_MPSAFE
- Reduce stack usage of Lua
- Don't save user FPU context in kernel threads
- Add support for procfs_list
- Code cleanup in zio_crypt
- Add DB_RF_NOPREFETCH to dbuf_read()s in dnode.c
- Drop references when skipping dmu_send due to EXDEV
- Eliminate gratuitous bzeroing in dbuf_stats_hash_table_data
- Fix legacy compat for platform IOCs
This was introduced when I merged r361287 to OpenZFS and has been fixed
there already, commit 3f6bb6e43fd68e.
Reported by: swills
Reviewed by: allanjude, freqlabs, mmacy
An upcoming change to include bitset(9) macros from vm_page.h
causes a macro name collision with vchi's custom bitset macros.
This change was performed mechanically by:
sed -i .orig s/BITSET/VCHI_BITSET/g $(grep -rl BITSET sys/contrib/vchiq)
Reviewed by: andrew
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D26177
The pointer to vnode is already stored into f_vnode, so f_data can be
reused. Fix all found users of f_data for DTYPE_VNODE.
Provide finit_vnode() helper to initialize file of DTYPE_VNODE type.
Reviewed by: markj (previous version)
Discussed with: freqlabs (openzfs chunk)
Tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D26346
This package is intended to be used with ice(4) version 0.26.16. That
update will happen in a forthcoming commit.
MFC after: 3 days
Sponsored by: Intel Corporation
Make the inlines static to avoid kernel build failure with Clang 11 on i386.
(The issue was not observed with Clang 10, currently in tree; reproduction
depends on compiler inlining choices.)
The compiler may choose not to inline 'bare' C inlines, and in that case
expects a symbol of the same name will be available. It does not
automatically define that symbol at use, because of traditional C linking
semantics. (In contrast, C++ does define it, and then deduplicates redundant
definitions at link). As we do not instantiate the C99 inline ('extern
inline ...;'), the linker errors with "undefined symbol."
Reported by: dim
Tested by: dim
Fixes: r364219
Add prng(9) as a replacement for random(9) in the kernel.
There are two major differences from random(9) and random(3):
- General prng(9) APIs (prng32(9), etc) do not guarantee an
implementation or particular sequence; they should not be used for
repeatable simulations.
- However, specific named API families are also exposed (for now: PCG),
and those are expected to be repeatable (when so-guaranteed by the named
algorithm).
Some minor differences from random(3) and earlier random(9):
- PRNG state for the general prng(9) APIs is per-CPU; this eliminates
contention on PRNG state in SMP workloads. Each PCPU generator in an
SMP system produces a unique sequence.
- Better statistical properties than the Park-Miller ("minstd") PRNG
(longer period, uniform distribution in all bits, passes
BigCrush/PractRand analysis).
- Faster than Park-Miller ("minstd") PRNG -- no division is required to
step PCG-family PRNGs.
For now, random(9) becomes a thin shim around prng32(). Eventually I
would like to mechanically switch consumers over to the explicit API.
Reviewed by: kib, markj (previous version both)
Discussed with: markm
Differential Revision: https://reviews.freebsd.org/D25916
It was pointed out to me that this is the convention for documenting upgrade
instructions, rather than just leaving the instructions in the commit message.
It's possible these commands won't be used again before we transition to git,
but then at least they'll give a path forward for whoever touches this next.
Suggested by: lwhsu
We use these to compile libefivar. The particular motivation for this update is
the inclusion of the RISC-V machine definitions that allow us to build the
library on the platform. This support could easily have been submitted as a
small local diff, but the timing of the release coincided with this work, and
it has been over 3 years since these sources were initially imported.
Note that this comes with a license change from regular BSD 2-clause to the
BSD+Patent license. This has been approved by core@ for this particular
project [1].
As with the original import, we retain only the subset of headers that we
actually need to build libefivar. I adapted imp@'s process slightly for this
update:
# Generate list of the headers needed to build
cp -r ../vendor/edk2/dist/MdePkg/Include sys/contrib/edk2
cd lib/libefivar
make
pushd `make -V .OBJDIR`
cat .depend*.o | grep sys/contrib | cut -d' ' -f 3 |
sort -u | sed -e 's=/full/path/sys/contrib/edk2/==' > /tmp/xxx
popd
# Merge the needed files
cd ../../sys/contrib/edk2
svn revert -R .
for i in `cat /tmp/xxx`; do
svn merge -c VendorRevision svn+ssh://repo.freebsd.org/base/vendor/edk2/dist/MdePkg/$i $i
done
svn merge -c VendorRevision svn+ssh://repo.freebsd.org/base/vendor/edk2/dist/MdePkg/MdePkg.dec MdePkg.dec
[1] https://www.freebsd.org/internal/software-license.html
The ice(4) driver is the driver for the Intel E8xx series Ethernet
controllers; currently with codenames Columbiaville and
Columbia Park.
These new controllers support 100G speeds, as well as introducing
more queues, better virtualization support, and more offload
capabilities. Future work will enable virtual functions (like
in ixl(4)) and the other functionality outlined above.
For full functionality, the kernel should be compiled with
"device ice_ddp" like in the amd64 NOTES file, and/or
ice_ddp_load="YES" should be added to /boot/loader.conf so that
the DDP package file included in this commit can be downloaded
to the adapter. Otherwise, the adapter will fall back to a single
queue mode with limited functionality.
A man page for this driver will be forthcoming.
MFC after: 1 month
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21959
* Removed adaptive interrupt moderation (not suported on FreeBSD).
* Use ena_com_free_q_entries instead of ena_com_free_desc.
* Don't use ENA_MEM_FREE outside of the ena_com.
* Don't use barriers before calling doorbells as it's already done in
the HAL.
* Add function that generates random RSS key, common for all driver's
interfaces.
* Change admin stats sysctls to U64.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Although I added the reset type field to ath_hal_reset() years ago,
I never finished adding it both throughout the HALs and in if_ath.c.
This will eventually deprecate the ath_hal force_full_reset option
because it can be requested at the driver layer.
So:
* Teach ar5416ChipReset() and ar9300_chip_reset() about the HAL type
* Use it in ar5416Reset() and ar9300_reset() when doing a full chip reset
* Extend ath_reset() to include the HAL_RESET_TYPE parameter added in the above functions
* Use HAL_RESET_NORMAL in most calls to ath_reset()
* .. but use HAL_RESET_BBPANIC for the BB panics, and HAL_RESET_FORCE_COLD during fatal, beacon miss and other hardware related hangs.
This should be a glorified no-op outside of actual hardware issues.
I've tested things with ath_hal force_full_reset set to 1 for years now,
so I know that feature and a full reset works (albeit much slower than
a warm reset!) and it does unwedge hardware.
The eventual aim is to use this for all the places where the driver
detects a potential hang as well as if long calibration - ie, noise floor
calibration - fails to complete. That's one of the big hardware related
things that causes station mode operation to hang without easy recovery.
Differential Revision: https://reviews.freebsd.org/D24981
As usual, the full release notes are found on Github:
https://github.com/facebook/zstd/releases/tag/v1.4.5
Notable changes include:
* Improved decompress performance on amd64 and arm (5-10%
and 15-50%, respectively).
* '--patch-from' zstd(1) CLI option, which provides something like a very fast
version of bspatch(1) with slightly worse compression. See release notes.
In this update, I dropped the 3-year old -O0 workaround for an LLVM ARM bug;
the bug was fixed in LLVM SVN in 2017, but we didn't remove this workaround
from our tree until now.
MFC after: I won't, but feel free
Relnotes: yes
Yes, people shouldn't use bitfields in C for structure parsing.
If someone ever wants a cleanup task then it'd be great to remove them
from this vendor code and other places in the ar9285/ar9287 HALs.
Alas, here we are.
AH_BYTE_ORDER wasn't defined and neither were the two values it could be.
So when compiling ath_ee_print_9300 it'd default to the big endian struct
layout and get a WHOLE lot of stuff wrong.
So:
* move AH_BYTE_ORDER into ath_hal/ah.h where it can be used by everyone.
* ensure that AH_BYTE_ORDER is actually defined before using it!
This should work on both big and little endian platforms.
Ok, yeah, the commit title is a bit misleading.
This has to do with CDD (cyclic delay diversity) - how this and later
wifi hardware transmits lower rates over more antennas. Eg, if you're
transmitting legacy 11abg rates on 2 or 3 antennas, you COULD just
send them all at the same time or you could delay each by tens/hundreds
of nanoseconds to try and get some better diversity characteristics.
However, this has a fun side effect - the antenna pattern is no longer
a bunch of interacting dipoles, but are a bunch of interacting dipoles
plus a bunch of changing phases. And it's frequency dependent - 50-200nS
is not exactly the same fraction of a wavelength across all of 2GHz or 5GHz!
Thus the power spectral density and maximum directional gain that you're
effectively getting is not .. well, as flat as it once was.
For more information, look up FCC/OET 13TR1003 in the FCC technical report
database. It has pretty graphics and everything.
Anyway, the problem lies thusly - the CDD code just subtracts another 3dB
or 5dB for the lower rates based on transmit antenna configuration.
However, it's not done based on operating configuration and it doesn't
take into account how far from any regulatory limits the hardware is at.
It also doesn't let us do things like transmit legacy rates and frames
on a single antenna without losing up to 5dB when we absolutely don't
need to in that case (there's no CDD used when one antenna is used!)
This shows up as the hardware behaving even worse for longer distance links
at 20MHz because, well, those are the exact rates losing a bunch more
transmit power.
* For lower power NICs (ie the majority of what is out there!) it's highly
unlikely we're going to hit anywhere near the PSD limits.
* It's doing it based on the existing limits from the CTL table (conformance
testing limits) - this isn't the regulatory max! It's what the NIC is
allowed to put out in each frequency and rate configuration! So things like
band edges, power amplifier behaviour and maximum current draw apply here.
Blindly subtracting 3 to 5dB from /this/ value is /very/ conservative..
* /and/ ath9k just plainly doesn't do any of this at all.
So, for now disable it and get the TX power back, thus matching what ath9k
in Linux is doing. If/once I get some more cycles I'll look at making it
a bit more adaptive and really only kick in if we're a few dB away from
hard regulatory limits.
Tested:
* AR9344 (2GHz + SoC, 2x2 configuration) - AP and STA modes
* QCA9580 (5GHz 2x2 and 3x3 configurations) - AP and STA modes
