(gpt)zfsboot will read one-time boot directives from a special ZFS pool
area. The area was previously described as "Boot Block Header", but
currently it is know as Pad2, marked as reserved and is zeroed out on
pool creation. The new code interprets data in this area, if any, using
the same format as boot.config. The area is immediately wiped out.
Failure to parse the directives results in a reboot right after the
cleanup. Otherwise the boot sequence proceeds as usual.
zfsbootcfg writes zfsboot arguments specified on its command line to the
Pad2 area of a disk identified by vfs.zfs.boot.primary_pool and
vfs.zfs.boot.primary_vdev kenv variables that are set by loader during
boot. Please see the manual page for more.
Thanks to all who reviewed, contributed and made suggestions! There are
many potential improvements to the feature, please see the review for
details.
Reviewed by: wblock (docs)
Discussed with: jhb, tsoome
MFC after: 3 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D7612
The untyped probe arguments have a width larger than int on such platforms,
so printing their value without a cast can give unexpected results.
MFC after: 1 week
illumos/illumos-gate@f9eb9fdf19https://github.com/illumos/illumos-gate/commit/f9eb9fdf196b6ed476e4ffc69cecd8b0d
a3cb7e7
https://www.illumos.org/issues/6451
Sometimes ztest fails because zdb detects checksum errors. e.g.:
Traversing all blocks to verify checksums and verify nothing leaked ...
zdb_blkptr_cb: Got error 50 reading <71, 47, 0, 8000160> DVA0=<0:1cc2000:
180000> [L0 other uint64[]] sha256 uncompressed LE contiguou
s unique single size=100000L/100000P birth=271L/271P fill=1
cksum=c5a3e27d1ed0f894:843bca3a5473c4bf:f76a19b6830a2e4:91292591613a12bf --
skipping
zdb_blkptr_cb: Got error 50 reading <71, 47, 0, 800000180> DVA0=<0:ce16800:
180000> [L0 other uint64[]] sha256 uncompressed LE contigu
ous unique single size=100000L/100000P birth=840L/840P fill=1
cksum=5d018f3d061e17f3:6d1584784587bf63:2805a74a0ce37369:ba68a214806c7e75
-- skipping
zdb_blkptr_cb: Got error 50 reading <71, 47, 0, 1000000360> DVA0=<0:10d37400:
180000> [L0 other uint64[]] sha256 uncompressed LE conti
guous unique single size=100000L/100000P birth=904L/904P fill=1
cksum=fa1e11d4138bd14b:86c9488c444473e3:f31e43c72e72e46b:e3446472d1174d
ba -- skipping
zdb_blkptr_cb: Got error 50 reading <71, 47, 0, 400000002c0> DVA0=<0:127ef400:
180000> [L0 other uint64[]] sha256 uncompressed LE cont
iguous dedup single size=100000L/100000P birth=549L/549P fill=1
cksum=30e14955ebf13522:66dc2ff8067e6810:4607e750abb9d3b3:6582b8af909fcb
58 -- skipping
zdb_blkptr_cb: Got error 50 reading <657, 5, 0, 1c0> DVA0=<0:1a180400:180000>
[L0 other uint64[]] fletcher4 uncompressed LE contiguou
s unique single size=100000L/100000P birth=1091L/1091P fill=1 cksum=a6cf1e50:
29b3bd01c57e5:36779b914035db9a:db61cdcf6bec56f0 -- skippin
g
The problem is that ztest_fault_inject() can inject multiple faults into the
same block. It is designed such that it can inject errors on all leafs of a
RAID-Z or mirror, but for a given range of offsets, it will only inject errors
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Jorgen Lundman <lundman@lundman.net>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
7147 ztest: ztest_ddt_repair fails with ztest_pattern_match assertion
illumos/illumos-gate@aab8072633https://github.com/illumos/illumos-gate/commit/aab80726335c76a7cae32c7300890248d
73a51e3
https://www.illumos.org/issues/7147
Here's the dbuf we're currently reading:
966f200::dbuf
addr object lvl blkid holds os
966f200 4 0 0 1 ztest/ds_3
966f200::print dmu_buf_t db_data
db_data = 0x9ae0400
0x9ae0400/10J
0x9ae0400: c1c7ced932020d c1c7ced932020d c1c7ced932020d c1c7ced932020d
c1c7ced932020d c1c7ced932020d c1c7ced932020d c1c7ced932020d
c1c7ced932020d c1c7ced932020d
The pattern we're expecting is actually this: a34ae10b5f2db2. If we attempt to
read the block on disk we find that it has matches what ztest_ddt_repair()
would have written:
~c1c7ced932020d=J
ff3e383126cdfdf2
966f200::print dmu_buf_impl_t db_blkptr | ::blkptr
DVA0=<0:71d3c00:800>
[L0 UINT64_OTHER] SHA256 OFF LE contiguous dedup single
size=400L/400P birth=55L/55P fill=1
cksum=18486450d3ce8c6d:75a72f4bbf117b0f:2d3a226314eb5650:2eb0fd68648b1af0
1. zdb -U /rpool/tmp/zpool.cache -R ztest 0:71d3c00:800 | head
Found vdev type: mirror
0:71d3c00:800
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
000000: ff3e383126cdfdf2 ff3e383126cdfdf2 ...&18>....&18>.
000010: ff3e383126cdfdf2 ff3e383126cdfdf2 ...&18>....&18>.
000020: ff3e383126cdfdf2 ff3e383126cdfdf2 ...&18>....&18>.
000030: ff3e383126cdfdf2 ff3e383126cdfdf2 ...&18>....&18>.
000040: ff3e383126cdfdf2 ff3e383126cdfdf2 ...&18>....&18>.
000050: ff3e383126cdfdf2 ff3e383126cdfdf2 ...&18>....&18>.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: George Wilson <george.wilson@delphix.com>
illumos/illumos-gate@dcbf3bd6a1dcbf3bd6a1https://www.illumos.org/issues/6950
When reading compressed data from disk, the ARC should keep the compressed
block cached and only decompress it when consumers access the block. The
uncompressed data should be short-lived allowing the ARC to cache a much larger
amount of data. The DMU would also maintain a smaller cache of uncompressed
blocks to minimize the impact of decompressing frequently accessed blocks.
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: George Wilson <george.wilson@delphix.com>
illumos/illumos-gate@759e89be35https://github.com/illumos/illumos-gate/commit/759e89be359f2af635e4122d147df56bc
e948773
https://www.illumos.org/issues/6447
I got a patch from someone who uses nvpair code outside of illumos. It fixes a
couple of gcc warnings/bugs for him.
1. silence uninitialized use warnings
2. add parentheses around assignment used as truth value
3. fix printf format specifier (ll is for integers only)
4. strstr, strspn, strcspn, and strcmp are declared in string.h, not
strings.h.
5. avoid scanning integer into boolean variable
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Steve Dougherty <sdougherty@barracuda.com>
illumos/illumos-gate@9adfa60d48https://github.com/illumos/illumos-gate/commit/9adfa60d484ce2435f5af77cc99dcd4e6
92b6660
https://www.illumos.org/issues/6314
Callers of dsl_dataset_name pass a buffer of size ZFS_MAXNAMELEN, but
dsl_dataset_name copies the datasets' name PLUS the snapshot name to it,
resulting in a max of 2 * ZFS_MAXNAMELEN + '@'.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@8808ac5daehttps://github.com/illumos/illumos-gate/commit/8808ac5dae118369991f158b6ab736cb2
691ecde
https://www.illumos.org/issues/4521
zfstest is trying to execute evil "zfs unmount -a", which fails (fortunately,
as it would otherwise leave me with my ~ missing):
03:44:11.86 cannot unmount '/export/home/yuri': Device busy cannot unmount '/
export/home': Device busy
03:44:11.86 ERROR: /usr/sbin/zfs unmount -a exited 1
This affects, at least, zfs_mount_009_neg and zfs_mount_all_001_pos, both
failing on that step. The pool containing the /export/home hierarchy is
included in KEEP variable, but it doesn't seem to affect anything here.
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Yuri Pankov <yuri.pankov@nexenta.com>
6879 incorrect endianness swap for drr_spill.drr_length in libzfs_sendrecv.c
illumos/illumos-gate@20fea7a474https://github.com/illumos/illumos-gate/commit/20fea7a47472aceb64d3ed48cc2a3ea26
8bc4795
https://www.illumos.org/issues/6879
In libzfs_sendrecv, there's a typo:
case DRR_SPILL:
if (byteswap) {
drr->drr_u.drr_write.drr_length =
BSWAP_64(drr->drr_u.drr_spill.drr_length);
}
Instead of drr_write.drr_length, we should be assigning the result of the
byteswap to drr_spill.drr_length.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Dan Kimmel <dan.kimmel@delphix.com>
illumos/illumos-gate@4a20c933b1https://github.com/illumos/illumos-gate/commit/4a20c933b148de8a1c1d3538391c64284
e636653
https://www.illumos.org/issues/6111
If you create a zfs child folder, zfs send returns an error when a recursive
incremental send is done between two snapshots made prior to the folder
creation.
The problem can be reproduced with the following steps.
root@zfs:/# zfs create pool/test
root@zfs:/# zfs snapshot pool/test@snap1
root@zfs:/# zfs snapshot pool/test@snap2
root@zfs:/# zfs create pool/test/child
root@zfs:/# zfs send -R -I pool/test@snap1 pool/test@snap2 > /dev/null
WARNING: could not send pool/test/child@snap2: does not exist
WARNING: could not send pool/test/child@snap2: does not exist
root@zfs:/# echo $?
1
root@zfs:/# zfs snapshot -r pool/test@snap3
root@zfs:/# zfs send -R -I pool/test@snap1 pool/test@snap3 > /dev/null
root@zfs:/# echo $?
0
root@zfs:/# zfs send -R -I pool/test@snap2 pool/test@snap3 > /dev/null
root@zfs:/# echo $?
0
Since pool/test/child was created after snap2, zfs send should not expect snap2
to be in pool/test/child when doing a recursive send. It should examine the
compare the creation time of the snapshot and each child folder to decide if
the folder will be sent. The next incremental send between snap2 and snap3
would properly create the child folder and snap3 which first appears in the
child folder.
The problem is identical if '-i' is used instead of '-I'.
Reviewed by: Alex Aizman alex.aizman@nexenta.com
Reviewed by: Alek Pinchuk alek.pinchuk@nexenta.com
Reviewed by: Roman Strashkin roman.strashkin@nexenta.com
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Alex Deiter <alex.deiter@nexenta.com>
6902 speed up listing of snapshots if requesting name only and sorting by name
This was our change from the beginning, so just reduce the upstream diff.
6876 Stack corruption after importing a pool with a too-long name
illumos/illumos-gate@c971037baac971037baahttps://www.illumos.org/issues/6876
Calling dsl_dataset_name on a dataset with a 256 byte buffer is asking for
trouble. We should check every dataset on import, using a 1024 byte buffer and
checking each time to see if the dataset's new name is longer than 256 bytes.
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Paul Dagnelie <pcd@delphix.com>
Previously, ctf_member_info() would ignore members belonging to an
anonymous struct or union. This made it impossible to, for example, trace
the m_next field of an mbuf using DTrace.
Reported and tested by: gallatin
MFC after: 2 weeks
- TESTSBASE and LOCALBASE are already defined in bsd.tests.mk
- TESTSDIR is automatically divined as ${TESTSBASE}${RELDIR:H} after
r289158.
- Replace SRCDIR with SRCTOP
MFC after: 1 week
X-MFC with: r305019
Sponsored by: EMC / Isilon Storage Division
* TESTSDIR is supposed to be under cddl/usr.sbin, not cddl/sbin
* DevdCtl::EventBuffer no longer exists, so remove its forward
declaration
MFC after: 3 days
X-MFC-With: r305013
There are two cases where changing canmount should result in an action:
- canmount is set to off for a mounted filesystem
- canmount is set to on for an unmounted filesystem
Before r297521 we could unmount and re-mount a filesystem when that was
not necessary, but after r297521 we only handled the first of the above
cases.
MFC after: 5 days
Have it print the contents of aggregations, if any. Otherwise, one needs to
kill the running script to view the collected data, or add code to
periodically print it.
Discussed with: gnn
MFC after: 1 month
7085 add support for "if" and "else" statements in dtrace
illumos/illumos-gate@c3bd3abd88
Add syntactic sugar to dtrace: "if" and "else" statements. The sugar is
baked down to standard dtrace features by adding additional clauses with
the appropriate predicates.
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Bryan Cantrill <bryan@joyent.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 2 weeks
Relnotes: yes
Both test suites require more memory than my amd64 VM using
GENERIC-NODEBUG can provide and reliably panic it with OOM issues in
dtrace(4).
Some of the testcases fail, but this at least bypasses the panic behavior
on platforms that don't have enough resources
MFC after: 2 weeks
Discussed with: markj
Sponsored by: EMC / Isilon Storage Division
This resolves a -Wformat issue when the value is used as a format width
precision specifier, i.e. %*s
MFC after: 1 month
Reported by: clang
Sponsored by: EMC / Isilon Storage Division
Note: conversion of the manual page change from roff to mdoc is mine.
illumos/illumos-gate@b702644a6eb702644a6ehttps://www.illumos.org/issues/7164
If the pool/dataset command-line argument is specified with a trailing
slash, for example, "tank/", we should interpret it as the topmost
dataset (rather than the whole pool)
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Tim Chase <tim@chase2k.com>
PR: 204661
MFC after: 1 week
Relnotes: yes
illumos/illumos-gate@ae24175b2bae24175b2bhttps://www.illumos.org/issues/6391
When using zdb with non-default SPA config file it is not convenient
to add -U <non-default-config-file-path> all the time. This commit
introduces support for setting/overriding SPA config location via
environment variable 'SPA_CONFIG_PATH'.
If -U flag is specified in the command line it will override any other
value as usual.
64d7b6cf75
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Yao <ryao@gentoo.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Cyril Plisko <cyril.plisko@mountall.com>
MFC after: 1 week
setting a 32 bit value on each socket. This can be used by applications
and DTrace as a rendezvous point so that an applicaton's data can
more easily be captured at run time. Expose the user cookie via
DTrace by updating the translator in tcp.d and add a quick test
program, a TCP server, that sets the cookie on each connection
accepted.
Reviewed by: hiren
MFC after: 1 week
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D7152
cddl/lib/libavl/Makefile
cddl/lib/libctf/Makefile
cddl/lib/libnvpair/Makefile
cddl/lib/libumem/Makefile
cddl/lib/libuutil/Makefile
Increase WARNS to the highest working level for each of these
libraries
Approved by: re (gjb, hrs)
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
lib/libdevdctl/consumer.cc
In Consumer::DisconnectFromDevd, don't close the socket if it's
already closed.
cddl/usr.sbin/zfsd/case_file.cc
lib/libdevdctl/consumer.h
Delete dead code leftover from before devd(8) gained SOCK_SEQPACKET
support
Reported by: Coverity
CID: 1356155, 1356169
Sponsored by: Spectra Logic Corp
