The case for which this was added, r274807, causes this warning to
always show. LOCAL_DIRS=foo LOCAL_LIB_DIRS=foo/lib. The only case in
which r274807 is a problem is if foo/Makefile does not contain
SUBDIR+=lib, which is a normal convention. LOCAL_LIB_DIRS is a special
hack only to get a library into the _generic_libs list for the
'make libraries' bootstrapping phase. The old behavior changed in
r274807 was only in head during the 10.0 cycle, so the warning was
only ever needed until release anyhow.
Reported by: ngie
MFC after: 1 week
Sponsored by: Dell EMC Isilon
The switch to elftoolchain's readelf in r280859 caused native-xtools
to no longer build readelf. This fixes poudriere builds not using
a native readelf when expected.
Reported by: strejda on freenode
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Note that mandoc does not use anymore sqlite3 but a home made database format
An important improvement has been made as well in makewhatis performance:
Tests on my laptop shows makewhatis on the entire system goes from 26s to 12s
Build and install an o32 set of libraries on mips64 suitable for
running o32 binaries via COMPAT_FREEBSD32. Enable COMPAT_FREEBSD32 in
MALTA64.
Reviewed by: jmallett, imp
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D9032
MK_KERBEROS_SUPPORT != no
This fixes the odd case where someone specified MK_GSSAPI=no and
MK_KERBEROS_SUPPORT=yes (which admittedly, probably doesn't make sense,
but the build system doesn't prevent this case today, and it didn't when
I filed the bug back in 2011 either).
MFC after: 2 weeks
PR: 159745
During the clang/llvm 3.9.0 import, the build structure for it was
completely revamped. This broke the native-xtools target.
It first attempts to build libllvmminimal, then the llvm-tblgen and
clang-tblgen executables, but these fail to link because they are linked
to the 'full' libllvm by default, as they normally are during the
'world' stage.
To make these link against libllvmminimal instead, define TOOLS_PREFIX,
similarly as during the bootstrap-tools phase. The value itself is
empty, as we don't really want to use a prefix.
Reviewed by: imp
PR: 215684
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D9026
being a bootstrap tool. However, for reproducible build output,
FreeBSD added dd status=none because it was otherwise difficult to
suppress the status information, but retain any errors that might
happen. There's no real reason that dd has to be a build tool, other
than we use status=none unconditional. Remove dd from a bootstrap tool
entirely by only using status=none when available. This may also help
efforts to build the system on non-FreeBSD hosts as well.
Differential Revision: https://reviews.freebsd.org/D8605
Any .debug or .symbols files under /usr/lib/debug which correspond to
OLD_FILES entries in ObsoleteFiles.inc are also automatically cleaned up
by the delete-old target. Make this also apply to any OLD_DIRS entries.
Reviewed by: emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D8683
to create a repo during 'make packages'
This would have been useful for a situation I found myself in where
pkg(8) had been upgraded to a version that wanted the FBSD_1.5 ABI
version but libc.so.7 had not been upgraded, and only provided
FBSD_1.4. I found I needed to update libc in order to run pkg, and I
also needed to use pkg to update libc... Which is why pkg-static
exists, but there's currently no way to tell the build system to use
pkg-static instead of pkg.
This creates a variable PKG_CMD, default value 'pkg', that can be
overridden from the command line.
Reviewed by: gjb
Approved by: gjb
Differential Revision: https://reviews.freebsd.org/D8120
If set it installs LLD as /usr/bin/ld. LLD (as of version 3.9) is not
capable of linking the world and kernel, but can self-host and link many
substantial applications. GNU ld continues to be used for the world and
kernel build, regardless of how this knob is set.
It is on by default for arm64, and off for all other CPU architectures.
Sponsored by: The FreeBSD Foundation
Hardfloat is now default (use riscv64sf as TARGET_ARCH
for softfloat).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8529
This should fix the lib32 build since it was not removing the generated
ioctl.c. This file is generated by a find(1) call, so cannot use normal
dependency tracking methods.
Reported by: jhb
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Compiler-rt and LLVM's libunwind provide a suitable replacement for
libgcc.a, libgcc_eh.a, and libgcc_s.so.
Remove the now-unused LLVM_LIBUNWIND block from gnu/lib/libgcc.
PR: 213480 [exp-run]
Reviewed by: brooks, ed
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8189
Running `make libfoo.ll` or `make libfoo.bc` within a library directory
will now give us an LLVM IR version of the library, and `make foo.full.ll`
or `make foo.full.bc` will give us an IR version of a binary.
As part of this change, we add an LLVM_LINK variable to sys.mk that can be
specified/overridden using an external toolchain.
Reviewed by: bdrewery, brooks
Approved by: rwatson (mentor)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8388
Summary:
The Freescale e500v2 PowerPC core does not use a standard FPU.
Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor
unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the
stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this.
Additionaly, the SPE opcodes overlap with Altivec, so these are mutually
exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was
created with the same function set as in powerpc/powerpc/altivec.c, so it
becomes effectively a drop-in replacement. setjmp/longjmp were modified to save
the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by
the SPE).
Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not
support double-precision floating point.
Also, without a new MACHINE_ARCH it would be impossible to provide binary
packages which utilize the SPE.
Additionally, no work has been done to support ports, work is needed for this.
This also means no newer gcc can yet be used. However, gcc's powerpc support
has been refactored which would make adding a powerpcspe-freebsd target very
easy.
Test Plan:
This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222
(P1022-based) board, compiled against the new ABI. Base system utilities
(/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot
multiuser.
Reviewed By: bdrewery, imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D5683
It also turns off dependencies (bsdinstall, bsdconfig, dpv, tzsetup).
Reviewed by: dteske
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7969
* Bootstrap llvm-tblgen and clang-tblgen with a minimal llvm static
library, that has no other dependencies.
* Roll up all separate llvm libraries into one big static libllvm.
* Similar for all separate clang and lldb static libraries.
* For all these libraries, generate their .inc files only once.
* Link all llvm tools (including extra) against the big libllvm.
* Link clang and clang-format against the big libllvm and libclang.
* Link lldb against the big libllvm, libclang and liblldb.
N.B.: This is work in progress, some details may still be missing.
It also heavily depends on bsd.*.mk's support for SRCS and DPSRCS with
relative pathnames, which apparently does not always work as expected.
For building llvm, clang and lldb though, it seems to work just fine.
The main idea behind this restructuring is maintainability and build
peformance. The previous large number of very small libraries, each
with their own generated files and dependencies was slow to traverse
and hard to understand.
Possible future improvements:
* Only build certain targets, e.g. for most regular users having just
one target will be fine. This will shave off some build time.
* Building the big llvm, clang and lldb libraries as shared (private)
libraries.
* Adding other components from the LLVM project, such as lld.
There were a few issues.
- In-tree GCC won't have X_COMPILER_TYPE defined but will have
WANT_COMPILER_TYPE==gcc set from the SYSTEM_COMPILER logic that can
be used. Make the clang check specific to clang as well to ensure
-target doesn't leak into a GCC build.
- When using a cross-compiler GCC (with a default sysroot or arch) and also
passing --sysroot, it basically forgets all internal paths for
libraries. We've already worked around this quite a bit for
the external toolchains. Now for the in-tree bootstrap cross-compiler
GCC, also pass in the needed -B${WORLDTMP}/usr/lib to find the crt
object files, but also -isystem and -L to fix the paths. This creates
quite a spammy build log, but it is clear and still achieves the goals
and stays consistent between internal and external build flags.
Reducing the spam by using the '=' prefix feature will help and be
done later.
MFC after: 3 days
X-MFC-With: r304681
Reported by: bz
Pointyhat to: bdrewery
Sponsored by: EMC / Isilon Storage Division
The internal bootstrap compiler has a default sysroot set by TOOLS_PREFIX
and target set by TARGET/TARGET_ARCH. However, there are several needs to
always pass an explicit --sysroot and -target.
- External compiler needs sysroot and target flags.
- External ld needs sysroot.
- To be clear about the use of a sysroot when using the internal compiler.
- Easier debugging.
- Allowing WITH_SYSTEM_COMPILER+WITH_META_MODE to work together due to
the flip-flopping build command when sometimes using external and
sometimes using internal.
- Allow using no lld which has support for default paths.
The default sysroot in the bootstrap compiler is not changed. The
buildenv compiler will still work with its default and will also
include -target/--sysroot from CC in the environment.
MFC after: 3 days
Discussed with: emaste, brooks (BSDCam)
Reviewed by: emaste
Sponsored by: EMC / Isilon Storage Division
Previously, librtld_db just hardcoded /libexec/ld-elf.so, which isn't
correct for processes that aren't using the native ABI. With this change,
librtld_db can be used to inspect non-native processes; in particular,
dtrace -c now works for 32-bit executables on amd64.
MFC after: 1 month
It was added to sys.mk relatively recently (r274503) for EFI builds
but is no longer used by the base system. The in-tree binutils are
outdated, will not be updated, and will be removed in the future.
Remove it from the toolchain build now to slightly simplify the build
and make sure we don't grow an accidental dependency.
Note that this affects only the toolchain build, and does not affect
/usr/bin/objdump in the built world.
Reviewed by: bdrewery
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6460
This was a regression from r300349.
Setting MK_CROSS_COMPILER=no forces the compiler bootstraping *and* the
binutils/elftoolchain bootstrapping to be disabled in share/mk/src.opts.mk.
The only intent with using an external compiler is to disable bootstrapping of
the compiler. The binutils/elftoolchain bootstrapping must still occur unless
XAS is set. This did not affect WITH_SYSTEM_COMPILER.
Now that setting an external compiler sets both MK_CLANG_BOOTSTRAP and
MK_GCC_BOOTSTRAP to no, and MK_CROSS_COMPILER does the same via
share/mk/src/opts.mk, remove redundant logic that checks for
MK_CROSS_COMPILER. It will not always be true now that MK_CROSS_COMPILER==no
when an external compiler is used and --sysroot/-target is needed.
Reported by: sbruno
Pointyhat to: bdrewery
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
1. Always calculate what the expected values are.
2. Add 'make test-system-compiler' to show all of the computed values
vs the wanted values.
3. Extend the .info line to buildkernel/kernel-toolchain/toolchain/_cross-tools.
4. Consolidate all of the logic to one condition.
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
