install it as fmake. This defaults to no. This should be viewed as the
first step towards evental migration of this historic code to ports
and removal from the tree.
to bus_space(9) and that uses the proto(4) driver for talking to
hardware. If the I/O resource is a memory mapped I/O resource,
then mmap(2) will be attempted to avoid read(2)/write(2) overhead.
Sponsored by: Juniper Networks, Inc.
option. Convert all other uses to MK_CTF=no. Set MK_CTF=no rather than
the indirect WITHOUT_CDDL in filemon regression. It is expected that
NO_CTF will be removed in FreeBSD 12 entirely.
An execute-only fd (opened with O_EXEC) allows neither read() nor write()
and is therefore incompatible with all stdio modes. Therefore, the [EINVAL]
error applies.
Also adjust the similar check in freopen() with a NULL path, even though
this checks an fd which is already from a FILE.
building clang and/or gcc as the bootstrap compiler. Normally, the
default compiler is used. WITH_CLANG_BOOTSTRAP and/or
WITH_GCC_BOOTSTRAP will enable building these compilers as part
bootstrap phase. WITH/WITHOUT_CLANG_IS_CC controls which compiler is
used by default for the bootstrap phase, as well as which compiler is
installed as cc. buildworld now successfully completes building the
cross compiler with WITHOUT_CLANG=t and WITHOUT_GCC=t and produces a
built system with neither of these included.
Similarlly, MK_BINUTILS_BOOTSTRAP controls whether binutils is built
during this phase.
WITHOUT_CROSS_COMPILER will now force MK_BINUTILS_BOOTSTRAP=no,
MK_CLANG_BOOTSTRAP=no and MK_GCC_BOOTSTRAP=no.
BOOTSTRAP_COMPILER was considered, but rejected, since pc98 needs both
clang and gcc to bootstrap still. It should be revisisted in the
future if this requirement goes away. Values should be gcc, clang or
none. It could also be a list.
The odd interaction with Xfoo cross/external tools needs work, but
is beyond the scope of this change as well.
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
issues with vendors that needed 7.x support have been resolved. Many
vendors are still using 8.x build platforms, however, so bumping this
up to 9.0 will have to wait until that is resolved. Actual support for
building from 8.x still relies on those vendors fixing bugs that are
present as most developers have moved onto 9.x or newer platforms.
Reviewed by: marcel@
Interestingly, the pkill tool lives in bin, not usr.bin. Haven't bothered
to check if this is because the tool moved or because the tests were
originally added in the wrong place.
Note that these tests are for fmake, not bmake, and thus they are not
installed nor run when bmake is selected (the default). Yes, I have
wasted a *ton* of time on moving tests for no real reason other than
ensuring they are not left behind.
But maybe, just maybe, it was not work in vain: the majority of these
tests also work with bmake and the few that don't may point at broken
stuff. For example, the tests for the "archive" feature do not work
with bmake, but bmake's manpage and source tree seem to imply that they
should. So... to be investigated later; need to poke sjg@.
I'm starting with the easy cases. The leftovers need to be looked at a
bit more closely.
Note that this change _does_ modify the code of the old tests. This is
required in order to allow the code to locate the data files in the
source directory instead of the current directory, because Kyua
automatically changes the latter to a temporary directory.
Also note that at least one test is known to be broken here. Actually,
the test is not really broken: it's marked as a TODO but unfortunately
Kyua's TAP parser currently does not understand that. Will have to be
fixed separately.
This change was originally going to only migrate the usr.sbin tests but, as
it turns out, the usr.sbin/sa/ tests require files from usr.bin/lastcomm/
so it's better to just also migrate the latter at the same time. The other
usr.bin tests will be moved separately.
To make these tests work within the test suite, some of them have required
changes to prevent modifying the source directory and instead just rely on
the current directory for file manipulation.
/cfg updated with the modified configuration files in /etc. I have
written an improved version with the following features:
* Recurses directories.
* Only requires file arguments the first time the file/directory is
* added to /cfg.
* Handles file deletions.
PR: 145962, 157533
Submitted by: Aragon Gouveia and Alex Bakhtin
AppleTalk was a network transport protocol for Apple Macintosh devices
in 80s and then 90s. Starting with Mac OS X in 2000 the AppleTalk was
a legacy protocol and primary networking protocol is TCP/IP. The last
Mac OS X release to support AppleTalk happened in 2009. The same year
routing equipment vendors (namely Cisco) end their support.
Thus, AppleTalk won't be supported in FreeBSD 11.0-RELEASE.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
interface, in the r241616 a crutch was provided. It didn't work well, and
finally we decided that it is time to break ABI and simply make if_baudrate
a 64-bit value. Meanwhile, the entire struct if_data was reviewed.
o Remove the if_baudrate_pf crutch.
o Make all fields of struct if_data fixed machine independent size. The
notion of data (packet counters, etc) are by no means MD. And it is a
bug that on amd64 we've got a 64-bit counters, while on i386 32-bit,
which at modern speeds overflow within a second.
This also removes quite a lot of COMPAT_FREEBSD32 code.
o Give 16 bit for the ifi_datalen field. This field was provided to
make future changes to if_data less ABI breaking. Unfortunately the
8 bit size of it had effectively limited sizeof if_data to 256 bytes.
o Give 32 bits to ifi_mtu and ifi_metric.
o Give 64 bits to the rest of fields, since they are counters.
__FreeBSD_version bumped.
Discussed with: emax
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
This function is not public and brooks (initial committer adding the code)
suggests the deletion of the tests (which I don't know if they work)
instead of changing the visibility of the function.
Just replace the simple calls to the library with ad-hoc code. We should
later rewrite these with the ATF libraries anyway, which are part of the
base system.
Tests that cannot be run because a precondition is not met should be
marked as skipped, not failed. Do this for the tests in mdconfig that
first check if the caller user is root.
Small divergences in the output padding made some sa tests fail. Just
trim all whitespace from the outputs and the golden files so comparisons
are less fragile and the tests pass again.
Because bmake is the default make being built, many of the tests here
fail due to differences between the two. Just skip the tests for now
when using fmake.
This fixes a pgrep test that assumed that PID 2 was named g_event. This
does not seem to be the case any longer (and I don't know if it ever was
in all possible setups).
Change this test to use the idle loop instead and determine its expected
PID using ps without assuming any specific ID.
First, change the driver to run the installed yacc instead of the one from
/usr/obj (which might not be there), just as we (intend to) do with all
other tests.
Second, regenerate the expected output files from scratch. Based on visual
inspection, the differences seem OK. But this highlights that the tests in
here are too fragile and, possibly, useless: we should be testing the
behavior of the generated program, not the literal output. Something to be
addressed later.
This isn't entirely correct (as the device may not necc. be called wlan*) but
this will be further worked into a combined ath, iwn, wlan, etc. tool.
Discussed with: jhb, adrian
This just extracts the current statistics out from the NIC via
the new ioctl API and displays them. It runs every 100ms to hopefully
grab the latest statistics.
I may eventually teach this to use libstatfoo like what has been done
for athstats and such; but this is good enough for now for people to
do some basic investigation.
Tested:
* Intel Centrino 6205
It is a small and lightweight Mail Transport Agent.
It accepts mails from locally installed Mail User Agents (MUA) and delivers the
mails either locally or to a remote destination. Remote delivery includes
several features like TLS/SSL support, SMTP authentication and NULLCLIENT.
Make dma conditional to new WITHOUT_DMA option and make it respect WITHOUT_MAIL
Reviewed by: peter
Discussed with: emaste, bz, peter
all of the features in the current working draft of the upcoming C++
standard, provisionally named C++1y.
The code generator's performance is greatly increased, and the loop
auto-vectorizer is now enabled at -Os and -O2 in addition to -O3. The
PowerPC backend has made several major improvements to code generation
quality and compile time, and the X86, SPARC, ARM32, Aarch64 and SystemZ
backends have all seen major feature work.
Release notes for llvm and clang can be found here:
<http://llvm.org/releases/3.4/docs/ReleaseNotes.html>
<http://llvm.org/releases/3.4/tools/clang/docs/ReleaseNotes.html>
MFC after: 1 month
- netmap pipes, providing bidirectional blocking I/O while moving
100+ Mpps between processes using shared memory channels
(no mistake: over one hundred million. But mind you, i said
*moving* not *processing*);
- kqueue support (BHyVe needs it);
- improved user library. Just the interface name lets you select a NIC,
host port, VALE switch port, netmap pipe, and individual queues.
The upcoming netmap-enabled libpcap will use this feature.
- optional extra buffers associated to netmap ports, for applications
that need to buffer data yet don't want to make copies.
- segmentation offloading for the VALE switch, useful between VMs.
and a number of bug fixes and performance improvements.
My colleagues Giuseppe Lettieri and Vincenzo Maffione did a substantial
amount of work on these features so we owe them a big thanks.
There are some external repositories that can be of interest:
https://code.google.com/p/netmap
our public repository for netmap/VALE code, including
linux versions and other stuff that does not belong here,
such as python bindings.
https://code.google.com/p/netmap-libpcap
a clone of the libpcap repository with netmap support.
With this any libpcap client has access to most netmap
feature with no recompilation. E.g. tcpdump can filter
packets at 10-15 Mpps.
https://code.google.com/p/netmap-ipfw
a userspace version of ipfw+dummynet which uses netmap
to send/receive packets. Speed is up in the 7-10 Mpps
range per core for simple rulesets.
Both netmap-libpcap and netmap-ipfw will be merged upstream at some
point, but while this happens it is useful to have access to them.
And yes, this code will be merged soon. It is infinitely better
than the version currently in 10 and 9.
MFC after: 3 days
Experimental version released on February 7th, 2014.
This is the first release without the code for the deprecated tools. If
you require such code, please fetch a copy of the 0.19 release and extract
the 'tools' directory for your own consumption.
* Removed the deprecated tools. This includes atf-config, atf-report,
atf-run and atf-version.
Experimental version released on February 7th, 2014.
This is the last release to bundle the code for the deprecated tools.
The next release will drop their code and will stop worrying about
backwards compatibility between the ATF libraries and what the old tools
may or may not support.
If you still require the old tools for some reason, grab a copy of the
'tools' directory now. The code in this directory is standalone and
does not depend on any internal details of atf-c++ any longer.
* Various fixes and improvements to support running as part of the FreeBSD
test suite.
* Project hosting moved from Google Code (as a subproject of Kyua) to
GitHub (as a first-class project). The main reason for the change is
the suppression of binary downloads in Google Code on Jan 15th, 2014.
See https://github.com/jmmv/atf/
* Removed builtin help from atf-sh(1) and atf-check(1) for simplicity
reasons. In other words, their -h option is gone.
* Moved the code of the deprecated tools into a 'tools' directory and
completely decoupled their code from the internals of atf-c++. The
reason for this is to painlessly allow a third-party to maintain a
copy of these tools after we delete them because upcoming changes to
atf-c++ would break the stale tools.
commit 6b569451b92c48ccf1768da32e7e89189e1aa253
Author: Brooks Davis <brooks@one-eyed-alien.net>
Date: Mon Jan 27 22:50:46 2014 +0000
Always install nmtree as mtree.
For compability, link mtree to nmtree.
X-MFC after: never
Sponsored by: DARPA, AFRL
were a little broken and not automatable, with unix_seqpacket_test.
It's coverage is a superset of the old tests and it uses ATF. It
includes test cases for bugs kern/185813 and kern/185812.
PR: kern/185812
PR: kern/185813
Sponsored by: Spectra Logic
MFC after: 2 weeks
add separate rx/tx ring indexes
add ring specifier in nm_open device name
netmap.c, netmap_vale.c
more consistent errno numbers
netmap_generic.c
correctly handle failure in registering interfaces.
tools/tools/netmap/
massive cleanup of the example programs
(a lot of common code is now in netmap_user.h.)
nm_util.[ch] are going away soon.
pcap.c will also go when i commit the native netmap support for libpcap.
Put test programs for internal modules into a 'detail' subdirectory of the
libatf-c and libatf-c++ test directories, just as the upstream distribution
does. This is necessary because the tests assume such layout to find the
process_helper program, and currently fail because of this divergence.
MFC after: 1 week
The origin of WEP comes from IEEE Std 802.11-1997 where it defines
whether the frame body of MAC frame has been encrypted using WEP
algorithm or not.
IEEE Std. 802.11-2007 changes WEP to Protected Frame, indicates
whether the frame is protected by a cryptographic encapsulation
algorithm.
Reviewed by: adrian, rpaulo
Most relevant features:
- netmap emulation on any NIC, even those without native netmap support.
On the ixgbe we have measured about 4Mpps/core/queue in this mode,
which is still a lot more than with sockets/bpf.
- seamless interconnection of VALE switch, NICs and host stack.
If you disable accelerations on your NIC (say em0)
ifconfig em0 -txcsum -txcsum
you can use the VALE switch to connect the NIC and the host stack:
vale-ctl -h valeXX:em0
allowing sharing the NIC with other netmap clients.
- THE USER API HAS SLIGHTLY CHANGED (head/cur/tail pointers
instead of pointers/count as before). This was unavoidable to support,
in the future, multiple threads operating on the same rings.
Netmap clients require very small source code changes to compile again.
On the plus side, the new API should be easier to understand
and the internals are a lot simpler.
The manual page has been updated extensively to reflect the current
features and give some examples.
This is the result of work of several people including Giuseppe Lettieri,
Vincenzo Maffione, Michio Honda and myself, and has been financially
supported by EU projects CHANGE and OPENLAB, from NetApp University
Research Fund, NEC, and of course the Universita` di Pisa.
- Compile the tests with .t suffix, so prove can use them directly.
- The CHECKX() macro should increment ntest just like the CHECK() macro.
- For consistency remove # from the pwd.t output.
Submitted by: Mariusz Zaborski <oshogbo@FreeBSD.org>
executable ksh scripts. These are currently not copied into the test
directory the way that compiled executables are, so the tests which make use
of them cannot work. This changes the test Makefile to copy the scripts into
the test directory.
clang-specific or gcc-specific flags, introduce the following new
variables for use in Makefiles:
CFLAGS.clang
CFLAGS.gcc
CXXFLAGS.clang
CXXFLAGS.gcc
In bsd.sys.mk, these get appended to the regular CFLAGS or CXXFLAGS for
the right compiler.
MFC after: 1 week
Normal and bold fonts each have a glyph map for single or left half-
glyphs, and right half glyphs. The flag TF_CJK_RIGHT in term_char_t
requests the right half-glyph.
Reviewed by: ed@
Sponsored by: The FreeBSD Foundation
This change is a proof of concept on how to easily integrate existing
tests from the tools/regression/ hierarchy into the /usr/tests/ test
suite and on how to adapt them to the new layout for src.
To achieve these goals, this change:
- Moves tests from tools/regression/bin/<tool>/ to bin/<tool>/tests/.
- Renames the previous regress.sh files to legacy_test.sh.
- Adds Makefiles to build and install the tests and all their supporting
data files into /usr/tests/bin/.
- Plugs the legacy_test test programs into the test suite using the new
TAP backend for Kyua (appearing in 0.8) so that the code of the test
programs does not have to change.
- Registers the new directories in the BSD.test.dist mtree file.
Reviewed by: freebsd-testing
Approved by: rpaulo (mentor)
expect the installed ksh binary to be named "ksh", which is not the case
when it's installed on FreeBSD via the shells/ksh93 port. Allow for it to be
"ksh93" as well so that the tests can actually pass.
giving access to functionality that is not available in capability mode
sandbox. The functionality can be precisely restricted.
Start with the following services:
- system.dns - provides API compatible to:
- gethostbyname(3),
- gethostbyname2(3),
- gethostbyaddr(3),
- getaddrinfo(3),
- getnameinfo(3),
- system.grp - provides getgrent(3)-compatible API,
- system.pwd - provides getpwent(3)-compatible API,
- system.random - allows to obtain entropy from /dev/random,
- system.sysctl - provides sysctlbyname(3-compatible API.
Sponsored by: The FreeBSD Foundation
single threaded installworld, installkernel and distribution (using
NANO_MAKE). Setting NANO_PMAKE to 'make -j 12' would otherwise bomb
during installation of world.
MFC after: 2 weeks
Although <&0 does nothing, it is a redirection affecting standard input and
should therefore disable the </dev/null redirection implicit in a background
command.
This call should be a sufficiently close approximation of what happens
when a filesystem is unmounted and remounted. To be more specific, it
should test that the data that was in the page cache is the same data
that ends up on a stable storage or in a filesystem's internal cache,
if any.
This will catch the cases where a page with modified data is marked as
a clean page for whatever reason.
While there, make logging of the special events (open+close before
plus invalidation now) more generic and slightly better than the previous
hack.
MFC after: 10 days
This option should be useful for testing if a filesystem uses the
unified buffer / page cache.
Or, if filesystem's emulation of the unified cache works as expected.
This should be the case for e.g. ZFS.
MFC after: 1 week
- Fix ALWAYS_INSTALL to take precedence over the FreeBSD ID checks.
In particular, always install a file where the only change was
the FreeBSD ID even if -F is specified.
- Fix the -F option in the case that the only upstream change is a
change in the FreeBSD ID and the local file is removed.
- Add tests for these two cases.
passed to mergemaster. In this mode, only changes to /etc/master.passwd
and /etc/group are merged to /etc. In addition, it uses a temporary
tree to stage these changes rather than overwriting the existing
'current' and 'previous' trees so that a full update can be run after
a normal installworld has completed.
MFC after: 2 weeks
Add all files from /usr/tests to the obsoleted files list when the
build of the tests is disabled via the WITHOUT_TESTS knob. Do this
automatically so that we do not have to suffer the pain of maintaining
such list by hand.
Reviewed by: freebsd-testing
Approved by: rpaulo (mentor)
There is no reason to keep the two knobs separate: if tests are
enabled, the ATF libraries are required; and if tests are disabled,
the ATF libraries are not necessary. Keeping the two just serves
to complicate the build.
Reviewed by: freebsd-testing
Approved by: rpaulo (mentor)
good. This caused libc to spoof the ports libiconv namespace and
provide a colliding libiconv.so.3 to fool rtld. This should have
been removed some time ago.
This includes the following:
- use separate memory regions for VALE ports
- locking fixes
- some simplifications in the NIC-specific routines
- performance improvements for the VALE switch
- some new features in the pkt-gen test program
- documentation updates
There are small API changes that require programs to be recompiled
(NETMAP_API has been bumped so you will detect old binaries at runtime).
In particular:
- struct netmap_slot now is 16 bytes to support an extra pointer,
which may save one data copy when using VALE ports or VMs;
- the struct netmap_if has two extra fields;
MFC after: 3 days
If job control is not enabled, background jobs started with ... & ignore
SIGINT and SIGQUIT so that they are not affected by such signals that are
intended for the foreground job. However, this should not prevent
reassigning a different action for these signals (as if the shell invocation
inherited these signal actions from its parent).
Austin group issue #751
Example:
{ trap - INT; exec sleep 10; } & wait
A Ctrl+C should terminate the sleep command.
Add atsectl, a simple utility to read and update MAC addresses stored in
the default flash location on Altera DE4 boards. Typically used once
when setting up a board so leaving in tools rather than inflicting on
all users.
To build with world add LOCAL_DIRS=tools/tools/atsectl to the make
command line.
MFC after: 3 days
Sponsored by: DARPA/AFRL
r256095:
- Add gnu/usr.bin/rcs back to the base system.
r256120:
- Add WITHOUT_RCS back to src.conf.5.
r256121:
- Remove UPDATING entry regarding gnu/usr.bin/rcs removal.
Requested by: many
Approved by: re (marius)
Discussed with: core
Since so many programs don't check return value, always NUL terminate
the buf...
fix rounding when using base 1024 (the bug that started it all)...
add a set of test cases so we can make sure that things don't break
in the future...
Thanks to Clifton Royston for testing and the test program...
Approved by: re (hrs, glebius)
MFC after: 1 week
The libarchive-based replacements have been used since 2009; the GNU
ones were kept to support source upgrades from FreeBSD 6.
Approved by: re@ (delphij)
generates a configuration suitable for running unbound as a caching
forwarding resolver, and configures resolvconf(8) to update unbound's
list of forwarders in addition to /etc/resolv.conf. The initial list
is taken from the existing resolv.conf, which is rewritten to point to
localhost. Alternatively, a list of forwarders can be provided on the
command line.
To assist this script, add an rc.subr command called "enabled" which
does nothing except return 0 if the service is enabled and 1 if it is
not, without going through the usual checks. We should consider doing
the same for "status", which is currently pointless.
Add an rc script for unbound, called local_unbound. If there is no
configuration file, the rc script runs local-unbound-setup to generate
one.
Note that these scripts place the unbound configuration files in
/var/unbound rather than /etc/unbound. This is necessary so that
unbound can reload its configuration while chrooted. We should
probably provide symlinks in /etc.
Approved by: re (blanket)
This connects LLDB to the build, but it is disabled by default. Add
WITH_LLDB= to src.conf to build it.
Note that LLDB requires a C++11 compiler so is disabled on platforms
using GCC.
Approved by: re (gjb)
Sponsored by: DARPA, AFRL
The c++filt binary is only installed if ${MK_GCC} == yes && ${MK_CXX} ==
yes. This means that it should be removed if ${MK_GCC} == no ||
${MK_CXX} == no. In its current form, it actually uses a conjunction
instead of a disjunction.
As there is already a separate block for ${MK_CXX} == no listing
c++filt, simply remove the conditional entirely.
Approved by: re (gjb)
it. We should probably fix the code but appeasing clang with this fix for now.
gcc does not have such limit.
Reviewed by: jmg
Approved by: re (hrs), sbruno (mentor, implicit)
private shared libraries, instead of hacked-together archives of PIC
objects. This makes it possible to build a static libkrb5 that works.
Reviewed by: stas
Approved by: re (gjb)
To enable them, set WITH_GCC and WITH_GNUCXX in src.conf.
Make clang default to using libc++ on FreeBSD 10.
Bumped __FreeBSD_version for the change.
GCC is still enabled on PC98, because the PC98 bootloader requires GCC to build
(or, at least, hard-codes the use of gcc into its build).
Thanks to everyone who helped make the ports tree ready for this (and bapt
for coordinating them all). Also to imp for reviewing this and working on the
forward-porting of the changes in our gcc so that we're getting to a much
better place with regard to external toolchains.
Sorry to all of the people who helped who I forgot to mention by name.
Reviewed by: bapt, imp, dim, ...
Austin Group issue #411 requires 'e' to be accepted before and after 'x',
and encourages accepting the characters in any order, except the initial
'r', 'w' or 'a'.
Given that glibc accepts the characters after r/w/a in any order and that
diagnosing this problem may be hard, change our libc to behave that way as
well.
Formerly, return always returned from a function if it was called from a
function, even if there was a closer dot script. This was for compatibility
with the Bourne shell which only allowed returning from functions.
Other modern shells and POSIX return from the function or the dot script,
whichever is closest.
Git 1.8.4's rebase --continue depends on the POSIX behaviour.
Reported by: Christoph Mallon, avg
As promised, drop the option to make the older GNU patch
the default.
GNU patch is still being built but something drastic may
happen to it to it before Release.
The FFLAGS and OFLAGS now work correctly also for files opened with O_EXEC.
Except possibly fuse, the other users pass values without O_EXEC set. fuse
appears to assume O_EXEC is handled correctly.
Although F_SETFL may not be commonly used for execute-only file descriptors,
F_GETFL may be useful to find the access mode.
This driver is based on Linux 3.8 and a previous effort by kan@.
More informations about this project can be found on the FreeBSD wiki:
https://wiki.freebsd.org/AMD_GPU
The driver is split into:
sys/dev/drm2:
The driver sources.
sys/modules/drm2/radeonkmw:
The driver main kernel module's Makefile.
sys/modules/drm2/radeonkmsfw:
All firmware kernel module Makefiles. There's one directory and one
Makefile for each firmware.
sys/contrib/dev/drm2/radeonkmsfw:
All firmware binary sources.
tools/tools/drm/radeon
Tools to update firmwares or regenerate some headers.
Merging the driver to FreeBSD 9.x may be possible but not a priority for
now.
Help from: kib@, kan@
Tested by: avg@, kwm@, ray@,
Alexander Yerenkow <yerenkow@gmail.com>,
Anders Bolt-Evensen <andersbo87@me.com>,
Denis Djubajlo <stdedjub@googlemail.com>,
J.R. Oldroyd <fbsd@opal.com>,
Mikaël Urankar <mikael.urankar@gmail.com>,
Pierre-Emmanuel Pédron <pepcitron@gmail.com>,
Sam Fourman Jr. <sfourman@gmail.com>,
Wade <wade-is-great@live.com>,
(probably other I forgot...)
HW donations: kyzh, Yakaz
This header can be easily updated using the new "gen-drm_pciids" script,
available in tools/tools/drm. The script uses the Linux' drm_pciids.h
header for new IDs, the FreeBSD's one because we add the name of the
device to each IDs, and the PCI IDs database (misc/pciids port) to fill
this name automatically for new IDS.
To call the script:
tools/tools/drm/gen-drm_pciids \
/path/to/linux/drm_pciids.h \
/path/to/freebsd/drm_pciids.h \
/path/to/pciids/pci.ids
As per POSIX, a simple command must have at least one redirection,
assignment word or command word.
These occured in rare cases such as eval "f()" .
The extension of allowing no commands inside { }, if, while, for, etc.
remains.
POSIX does not require ++ and -- in arithmetic. It is probably more useful
to reject them than to treat ++x and --x as x silently.
Note that the behaviour of increment and decrement can be obtained via
(x+=1), ((x+=1)-1), (x-=1) and ((x-=1)+1).
PR: bin/176444
extensions and also tried to be link time compatible with ports libiconv.
This splits that functionality and enables the parts that shouldn't
interfere with the port by default.
WITH_ICONV (now on by default) - adds iconv.h, iconv_open(3) etc.
WITH_LIBICONV_COMPAT (off by default) adds the libiconv_open etc API, linker
symbols and even a stub libiconv.so.3 that are good enough to be able
to 'pkg delete -f libiconv' on a running system and reasonably expect it
to work.
I have tortured many machines over the last few days to try and reduce
the possibilities of foot-shooting as much as I can. I've successfully
recompiled to enable and disable the libiconv_compat modes, ports that use
libiconv alongside system iconv etc. If you don't enable the
WITH_LIBICONV_COMPAT switch, they don't share symbol space.
This is an extension of behavior on other system. iconv(3) is a standard
libc interface and libiconv port expects to be able to run alongside it on
systems that have it.
Bumped osreldate.
devices and the FreeBSD USB stack itself. This program can be used to
test compliance against well established usb.org standards, also
called chapter-9 tests. The host platform can act as either USB device
or USB host depending on the available hardware. The basic USB
communication happens through FreeBSD's own libusb v2, and some
sysctls are also used to invoke specific error conditions. This test
program can be used to verify correct operation of external USB
harddisks under heavy load and various other conditions. The software
is driven via a simple command line interface. Main supported USB host
classes are "USB mass storage" and "USB modems".
random_adaptor is basically an adapter that plugs in to random(4).
random_adaptor can only be plugged in to random(4) very early in bootup.
Unplugging random_adaptor from random(4) is not supported, and is probably a
bad idea anyway, due to potential loss of entropy pools.
We currently have 3 random_adaptors:
+ yarrow
+ rdrand (ivy.c)
+ nehemeiah
* Remove platform dependent logic from probe.c, and move it into
corresponding registration routines of each random_adaptor provider.
probe.c doesn't do anything other than picking a specific random_adaptor
from a list of registered ones.
* If the kernel doesn't have any random_adaptor adapters present then the
creation of /dev/random is postponed until next random_adaptor is kldload'ed.
* Fix randomdev_soft.c to refer to its own random_adaptor, instead of a
system wide one.
Submitted by: arthurmesh@gmail.com, obrien
Obtained from: Juniper Networks
Reviewed by: so (des)
Remove it if the knob isn't tweaked. Certain ports seem to think that
if /usr/bin/iconv exists, then libc has built in libiconv things and will
blow up pretty nicely when built.
Reviewed by: gjb@
MFC after: 2 weeks
* Make Yarrow an optional kernel component -- enabled by "YARROW_RNG" option.
The files sha2.c, hash.c, randomdev_soft.c and yarrow.c comprise yarrow.
* random(4) device doesn't really depend on rijndael-*. Yarrow, however, does.
* Add random_adaptors.[ch] which is basically a store of random_adaptor's.
random_adaptor is basically an adapter that plugs in to random(4).
random_adaptor can only be plugged in to random(4) very early in bootup.
Unplugging random_adaptor from random(4) is not supported, and is probably a
bad idea anyway, due to potential loss of entropy pools.
We currently have 3 random_adaptors:
+ yarrow
+ rdrand (ivy.c)
+ nehemeiah
* Remove platform dependent logic from probe.c, and move it into
corresponding registration routines of each random_adaptor provider.
probe.c doesn't do anything other than picking a specific random_adaptor
from a list of registered ones.
* If the kernel doesn't have any random_adaptor adapters present then the
creation of /dev/random is postponed until next random_adaptor is kldload'ed.
* Fix randomdev_soft.c to refer to its own random_adaptor, instead of a
system wide one.
Submitted by: arthurmesh@gmail.com, obrien
Obtained from: Juniper Networks
Reviewed by: obrien
all T4 and T5 based cards and is useful for analyzing TSO, LRO, TOE, and
for general purpose monitoring without tapping any cxgbe or cxl ifnet
directly.
Tracers on the T4/T5 chips provide access to Ethernet frames exactly as
they were received from or transmitted on the wire. On transmit, a
tracer will capture a frame after TSO segmentation, hw VLAN tag
insertion, hw L3 & L4 checksum insertion, etc. It will also capture
frames generated by the TCP offload engine (TOE traffic is normally
invisible to the kernel). On receive, a tracer will capture a frame
before hw VLAN extraction, runt filtering, other badness filtering,
before the steering/drop/L2-rewrite filters or the TOE have had a go at
it, and of course before sw LRO in the driver.
There are 4 tracers on a chip. A tracer can trace only in one direction
(tx or rx). For now cxgbetool will set up tracers to capture the first
128B of every transmitted or received frame on a given port. This is a
small subset of what the hardware can do. A pseudo ifnet with the same
name as the nexus driver (t4nex0 or t5nex0) will be created for tracing.
The data delivered to this ifnet is an additional copy made inside the
chip. Normal delivery to cxgbe<n> or cxl<n> will be made as usual.
/* watch cxl0, which is the first port hanging off t5nex0. */
# cxgbetool t5nex0 tracer 0 tx0 (watch what cxl0 is transmitting)
# cxgbetool t5nex0 tracer 1 rx0 (watch what cxl0 is receiving)
# cxgbetool t5nex0 tracer list
# tcpdump -i t5nex0 <== all that cxl0 sees and puts on the wire
If you were doing TSO, a tcpdump on cxl0 may have shown you ~64K
"frames" with no L3/L4 checksum but this will show you the frames that
were actually transmitted.
/* all done */
# cxgbetool t5nex0 tracer 0 disable
# cxgbetool t5nex0 tracer 1 disable
# cxgbetool t5nex0 tracer list
# ifconfig t5nex0 destroy
The BSD-licensed patch(1) command has matured and it's behaviour
can be considered equivalent to the older version of GNU patch
in the tree.
The switch has been extensively tested [1] and only two ports
presented regressions, which have since been fixed.
For convenience a new WITH_GNU_PATCH option is available,
but it will likely be removed in the near future.
PR: 176313
Approved by: portmgr
make the ARM EABI the default ABI on arm, armeb, armv6 and armv6eb.
This is intended to be the default ABI from now on with the old ABI to be
retired. Because of this all users are strongly suggested to upgrade to the
ARM EABI.
As the two ABIs are incompatible it is unlikely upgrading in place will
work. Users should perform a full backup and either use an external machine
to upgrade, or install to an alternative location on their media. They
should also reinstall all ports or packages when these are available.
The only known issues are:
- pkg incorrectly detects the ABI. This is fixed upstream, and will a
patch will be made to the port.
- GDB can have issues with executables built with clang.
__FreeBSD_version has been bumped.
Although using -i with -c does not seem very useful, it seems inappropriate
to read commands from the terminal in this case.
Side effect: if the -s -c extension is used and the -s option is turned off
using 'set +s' during the interactive part, the shell now exits after an
error or interrupt. Note that POSIX only specifies -s as option to sh, not
to set.
See also Austin Group issue #718.
- spa status can not be called before spa init
- libzfs.h inclusion is now required
- fix alternative code for explicit root dataset lookup
MFC after: 10 days
This is a workaround for WITH_LDNS_UTILS forcing BIND_UTILS off. It can
be reverted when we no longer have these conflicting options, or made more
general if we grow more cases like this.
This small utility performs a sequence of atomic operations with random
parameters on an atomic variable. For every type, we also create 16
variables, to ensure that we test the correctness at different
alignments.
debug files for userland programs and libraries. The "-g" debug flag
is automatically applied when WITH_DEBUG_FILES is set.
The debug files are now named ${prog}.debug and ${shlib}.debug for
consistency with other systems and documentation. In addition they are
installed under /usr/lib/debug, to simplify the process of installing
them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the
base system place the standalone debug files in a .debug subdirectory.
GDB automatically searches both of these directories for standalone
debug files.
Thanks to everyone who contributed changes, review, and testing during
development.
This is required by POSIX, at least for pids that are not known child
processes.
Other problems with job specifications still cause wait to abort with
exit status 2.
PR: 176916
This is only part of the PR; the behaviour for unknown/invalid pids/jobs
remains unchanged (aborts the builtin with status 2).
PR: 176916
Submitted by: Vadim Goncharov
+ pkt-gen -f rx now remains active even when traffic stops
Previous behaviour (exit after 1 second of silence) can be
restored with the -W option
+ the -X option does a hexdump of the content of a packet (both tx and rx).
This can be useful to check what goes in and out.
+ the -I option instructs the sender to use indirect buffers
(not really useful other than to test the kernel module in the
VALE switch)
I initially thought wchar_t was locale independent, but this seems to be
only the case on Linux. This means that we cannot depend on the *wc*()
routines to implement *c16*() and *c32*(). Instead, use the Citrus
libiconv that is part of libc.
I'll see if there is anything I can do to make the existing functions
somewhat useful in case the system is built without libiconv in the
nearby future. If not, I'll simply remove the broken implementations.
Reviewed by: jilles, gabor
