bus_alloc_resource(), bus_release_resource() and bus_set_resource()
(bus_generic_rl_alloc_resource(), bus_generic_rl_release_resource() and
bus_generic_rl_set_resource() respectively).
Do not print the resources for nomatch devices.
Use the inherited method for bus_get_resource_list() on ofw_iicbus.c.
Submitted by: jhb and Michal Meloun (D2033)
uintptr_t may be 64-bit on some platforms, therefore when
finding xrefinfo by pointer to device the high word is being
cut off due to cast to phandle_t which is 32-bit long by definition.
Due to that we loose the high word of the address to compare with
xi->dev's address.
To fix that, first argument of xrefinfo_find() is extended to
uintptr_t and is being cast to appropriate type (phandle_t)
when compared.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Reviewed by: nwhitehorn
Obtained from: Semihalf
duplicated code in the two classes, and also allows devices in FDT-based
systems to declare simplebus as their parent and still work correctly
when the FDT data describes the device at the root of the tree rather
than as a child of a simplebus (which is common for interrupt, clock,
and power controllers).
Differential Revision: https://reviews.freebsd.org/D1990
Submitted by: Michal Meloun
will be used with arm64 to find which cpus to enable, and could also be
used with 32-bit arm and mips for the same purpose.
Differential Revision: https://reviews.freebsd.org/D1825
Sponsored by: The FreeBSD Foundation
This will be needed by arm64 to find the value to pass to the psci (Power
State Coordination Interface) driver, among other things, used to enable
cores.
Differential Revision: https://reviews.freebsd.org/D1824
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
as the cpu id on arm64 as it may use two cells. In it's place we can use
the device id.
It is expected we will use the reg data on arm64 to enable cores so we
still need to read and store it even if it is not yet used.
Differential Revision: https://reviews.freebsd.org/D1555
Reviewed by: nwhitehorn
Sponsored by: The FreeBSD Foundation
tree's /chosen node to provide out-of-band header fields of the FDT. This
emulation is not perfect without corresponding changes to ofw_fdt_nextprop(),
but is enough to enable lookup by memory-map-parsing code.
MFC after: 1 week
Instead of reusing the same reg parsing code, create one, common function
that puts reg contents to the resource list. Address cells and size cells
are passed rather than acquired here so that any bus can have different
default values.
Obtained from: Semihalf
Reviewed by: andrew, ian, nwhitehorn
Sponsored by: The FreeBSD Foundation
but not always, identical. In particular, the path entry may contain a
unit address that the name does not. If the FDT node does have an explicit
name property, treat that as an override of the FDT path rather than
ignoring it.
MFC after: 2 weeks
The current support for controlling i2c bus speed is an inconsistant mess.
There are 4 symbolic speed values defined, UNKNOWN, SLOW, FAST, FASTEST.
It seems to be universally assumed that SLOW means the standard 100KHz
rate from the original spec. Nothing ever calls iicbus_reset() with a
speed of FAST, although some drivers would treat it as the 400KHz standard
speed. Mostly iicbus_reset() is called with the speed set to UNKNOWN or
FASTEST, and there's really no telling what any individual driver will do
with those.
The speed of an i2c bus is limited by the speed of the slowest device on
the bus. This means that generally the bus speed needs to be configured
based on the board/system and the components within it. Historically for
i2c we've configured with device hints. Newer systems use FDT data and it
documents a clock-frequency property for i2c busses. Hobbyists and
developers are likely to want on the fly changes. These changes provide
all 3 methods, but do not require any existing drivers to change to use
the new facilities.
This adds an iicbus method, iicbus_get_frequency(dev, speed) that gets the
frequency for the requested symbolic speed. If the symbolic speed is SLOW
or if there is no speed configured for the bus, the returned value is
100KHz, always. Otherwise, if bus speed is configured by hints, fdt,
tunable, or sysctl, that speed is returned. It also adds a helper
function, iicbus_init_frequency() that any bus driver subclassed from
iicbus can initialize the frequency from some other source of info.
Initial driver implementations are provided for Freescale and TI.
Differential Revision: https://reviews.freebsd.org/D1174
PR: 195009
After resource allocation and release, resource list entry
stays non-NULL. This causes panic in ofwbus_alloc_resource()
on subsequent resource allocation.
Clean appropriate list entry on release to avoid this.
Obtained from: Semihalf
Reviewed by: ian
Sponsored by: The FreeBSD Foundation
node's interrupts=<...> property creating resource list entries with a
single common implementation. This change makes ofw_bus_intr_to_rl() the
one true copy of that code and removes the copies of it from other places.
This also adds handling of the interrupts-extended property, which allows
specifying multiple interrupts for a node where each interrupt can have a
separate interrupt-parent. The bindings for this state that the property
cells contain an xref phandle to the interrupt parent followed by whatever
interrupt info that parent normally expects. This leads to having a
variable number of icells per interrupt in the property. For example you
could have <&intc1 1 &intc2 26 9 0 &intc3 9 4>.
Differential Revision: https://reviews.freebsd.org/D803
an entry in the xref list if one doesn't already exist for the given handle.
On a system that uses phandle properties, the init-time scan of the tree
which builds the xref list will pre-create entries for every xref handle
that exists in the data. On systems where the xref and node handles are
synonymous there is no phandle property in referenced nodes, and the xref
list will initialize to an empty state. In the latter case, we still need
to be able to associate a device_t with an xref handle, so we create list
entries on the fly as needed. Since the node and xref handles are
synonymous, we have all the info needed to create a list entry at device
registration time.
The downside to this change is that it basically allows on the fly creation
of xref handles as synonyms of node handles, and the association of a
device_t with them. Whether this is a bug or a feature is in the eye of
the beholder, I guess.
for the node. The default routine returns the untranslated handle, which
is sometimes useful, but sometimes you really need to know there's no
entry in the xref<->node<->device translation table.
xref handle, and for registering that association. Also use the same data
for faster translations between node and xref handles.
Now when fdt properties contain &othernode references, a driver can find
the device instance that corresponds to &othernode, and thus can use
interfaces provided by that instance.
Reviewed by: nwhitehorn
#gpio-cells property.
Add a new ofw_bus method (OFW_BUS_MAP_GPIOS()) that allows the GPIO
controller to implement its own mapping to deal with gpio-specifiers,
allowing the decoding of gpio-specifiers to be controller specific.
The default ofw_bus_map_gpios() decodes the linux standard (#gpio-cells =
<2>) and the FreeBSD standard (#gpio-cells = <3>).
It pass the gpio-specifier flag field to the children as an ivar variable so
they can act upon.
This change makes ofw_iicbus attach to iicbb(4) controllers in addition to
the already supported i2c host bridges (iichb).
On iicbb(4) allow the direct access of the OFW parent node by its children,
so they can be directly attached to iicbb(4) node on the DTS without the
need of describing the i2c bus.
Approved by: adrian (mentor, implicit)
a sub-node of nexus (ofwbus) rather than direct attach under nexus. This
fixes FDT on x86 and will make coexistence with ACPI on ARM systems easier.
SPARC is unchanged.
Reviewed by: imp, ian
process "status" properties of OF nodes.
I've avoided adding new KOBJ methods here so that we don't have to modify
every ofw_bus in the tree. Since 100% of implementations of ofw_bus use
only ofw_bus_gen_*(), it might be worth garbage-collecting the other
methods as well.
strings and include arbitrary information (IRQ line/domain/sense). When the
ofw_bus_map_intr() API was introduced, it assumed that, as on most systems,
these were either 1 cell, containing an interrupt line, or 2, containing
a line number plus a sense code. It turns out a non-negligible number of
ARM systems use 3 (or even 4!) cells for interrupts, so make this more
general.
in /chosen, be ihandles. The ePAPR spec makes those cross-reference phandles,
since FDT has no concept of ihandles. Have the OF FDT CI module interpret
queries about ihandles as cross-reference phandles.
