Commit Graph

2362 Commits

Author SHA1 Message Date
kensmith
68e5099fa6 Add a warning about why sbp(4) is commented out so that curious folks
are forewarned they might wind up with a hole in their foot if they
decide to give it a try.

Suggested by:	dougb
2011-10-19 21:55:20 +00:00
kensmith
756024305f Comment out the sbp(4) driver for architectures that support it.
As part of the 8.0-RELEASE cycle this was done in stable/8 (r199112)
but was left alone in head so people could work on fixing an issue that
caused boot failure on some motherboards.  Apparently nobody has worked
on it and we are getting reports of boot failure with the 9.0 test builds.
So this time I'll comment out the driver in head (still hoping someone
will work on it) and MFC to stable/9.

Submitted by:	Alberto Villa <avilla at FreeBSD dot org>
2011-10-18 13:45:16 +00:00
delphij
9da6f154d2 Add the 9750 SATA+SAS 6Gb/s RAID controller card driver, tws(4). Many
thanks for their contiued support to FreeBSD.

This is version 10.80.00.003 from codeset 10.2.1 [1]

Obtained from:	LSI http://kb.lsi.com/Download16574.aspx [1]
2011-10-04 21:40:25 +00:00
brueffer
129f307eb8 Fix a zyd(4) comment typo that was copy+pasted into most kernel config files.
PR:		160276
Submitted by:	MATSUMIYA Ryo <matsumiya@mma.club.uec.ac.jp>
Approved by:	re (kib)
MFC after:	1 week
2011-09-11 17:39:51 +00:00
jhb
dd0f1f95e2 Enable the puc(4) driver on amd64 and i386 in GENERIC. This allows
devices supported by puc(4) to work "out of the box" since puc.ko does
not work "out of the box".

Reviewed by:	marcel
Approved by:	re (kib)
MFC after:	1 week
2011-08-26 21:22:34 +00:00
rmacklem
3b8ed22952 Change all the sample kernel configurations to use
NFSCL, NFSD instead of NFSCLIENT, NFSSERVER since
NFSCL and NFSD are now the defaults. The client change is
needed for diskless configurations, so that the root
mount works for fstype nfs.
Reported by seanbru at yahoo-inc.com for i386/XEN.

Approved by:	re (hrs)
2011-08-07 20:16:46 +00:00
hselasky
88ca90f66a Enable USB 3.0 support by default in i386 and amd64 GENERIC kernels.
Discussed with:	joel @ and thompsa @
MFC after:	7 days
2011-06-14 20:30:49 +00:00
joel
6b76ad6c12 Enable sound support by default on i386 and amd64.
The generic sound driver has been added, along with enough
device-specific drivers to support the most common audio
chipsets.

We've discussed enabling it from time to time over the years
and we've received numerous requests from users, so we decided
that shipping 9.0 with working audio by default would be the
best thing to do.

Bug reports should be sent to the multimedia@ mailing list, as
usual.

Approved by:    mav
No objection:   re
2011-06-11 09:08:46 +00:00
kevlo
22d66d32a1 Bring back r222275. runfw(4) will statically link in rt2870.fw.uu
to the kernel, though I have MODULES_OVERRIDE="" in GENERIC.

Spotted by:	thompsa
2011-05-25 10:04:13 +00:00
kevlo
d0de3ee1d9 run(4) needs firmware loaded to work 2011-05-25 04:46:48 +00:00
brix
18b2666945 Add I2C bus driver for the AMD Geode LX series CS5536 Companion
Device.

Reviewed by:    jhb (newbus bits only), adrian
2011-05-15 14:01:23 +00:00
jkim
a112b2dac2 Add SC_PIXEL_MODE to GENERIC for amd64 and i386.
Requested by:	many
2011-05-10 16:44:16 +00:00
jhb
f4c1badc8d Enable the new PCI-PCI bridge driver on amd64 and i386 by default. It can
be disabled via 'nooptions NEW_PCIB'.
2011-05-03 18:23:11 +00:00
bschmidt
07db5669ea All PCI based wireless drivers seem to be explicitly removed from the
PAE kernel config, do that also for those added to GENERIC lately.
2011-05-02 16:51:02 +00:00
bschmidt
bee0509ed3 Add the remaining wireless drivers.
Discussed with:	joel
2011-05-01 13:26:34 +00:00
kevlo
de19e5a7fe Add urtw(4) 2011-04-29 06:36:39 +00:00
rmacklem
66b402e198 This patch changes head so that the default NFS client is now the new
NFS client (which I guess is no longer experimental). The fstype "newnfs"
is now "nfs" and the regular/old NFS client is now fstype "oldnfs".
Although mounts via fstype "nfs" will usually work without userland
changes, an updated mount_nfs(8) binary is needed for kernels built with
"options NFSCL" but not "options NFSCLIENT". Updated mount_nfs(8) and
mount(8) binaries are needed to do mounts for fstype "oldnfs".
The GENERIC kernel configs have been changed to use options
NFSCL and NFSD (the new client and server) instead of NFSCLIENT and NFSSERVER.
For kernels being used on diskless NFS root systems, "options NFSCL"
must be in the kernel config.
Discussed on freebsd-fs@.
2011-04-27 17:51:51 +00:00
mav
519a30551e - Add shim to simplify migration to the CAM-based ATA. For each new adaX
device in /dev/ create symbolic link with adY name, trying to mimic old ATA
numbering. Imitation is not complete, but should be enough in most cases to
mount file systems without touching /etc/fstab.
 - To know what behavior to mimic, restore ATA_STATIC_ID option in cases
where it was present before.
 - Add some more details to UPDATING.
2011-04-26 17:01:49 +00:00
mav
512a6cd715 Switch the GENERIC kernels for all architectures to the new CAM-based ATA
stack. It means that all legacy ATA drivers are disabled and replaced by
respective CAM drivers. If you are using ATA device names in /etc/fstab or
other places, make sure to update them respectively (adX -> adaY,
acdX -> cdY, afdX -> daY, astX -> saY, where 'Y's are the sequential
numbers for each type in order of detection, unless configured otherwise
with tunables, see cam(4)).

ataraid(4) functionality is now supported by the RAID GEOM class.
To use it you can load geom_raid kernel module and use graid(8) tool
for management. Instead of /dev/arX device names, use /dev/raid/rX.
2011-04-24 08:58:58 +00:00
adrian
6f4c1d61a6 Break out the ath PCI logic into a separate device/module.
Introduce the AHB glue for Atheros embedded systems. Right now it's
hard-coded for the AR9130 chip whose support isn't yet in this HAL;
it'll be added in a subsequent commit.

Kernel configuration files now need both 'ath' and 'ath_pci' devices; both
modules need to be loaded for the ath device to work.
2011-03-31 08:07:13 +00:00
bz
c41eae2d13 For now remove options FLOWTABLE from the remaining GENERIC kernel
configurations and make it opt-in for those who want it.  LINT will
still build it.

While it may be a perfect win in some scenarios, it still troubles users
(see PRs) in general cases.  In addition we are still allocating resources
even if disabled by sysctl and still leak arp/nd6 entries in case of
interface destruction.

Discussed with:	qingli (2010-11-24, just never executed)
Discussed with: juli (OCTEON1)
PR:		kern/148018, kern/155604, kern/144917, kern/146792
MFC after:	2 weeks
2011-03-19 15:50:34 +00:00
davidch
4cf0ebe1b2 - Initial release of bxe(4) to support Broadcom NetXtreme II 10GbE.
(BCM57710, BCM57711, BCM57711E)

MFC after:	One month
2011-03-14 22:42:41 +00:00
julian
144fd87db2 Add a small change to the comment in the GENRIC config files that include udbp
Submitted by:	Chris Forgron, cforgeron at acsi dot ca
MFC after:	1 week
2011-03-09 17:15:11 +00:00
yongari
e90b6f07f7 Add driver for DM&P Vortex86 RDC R6040 Fast Ethernet.
The controller is commonly found on DM&P Vortex86 x86 SoC.  The
driver supports all hardware features except flow control.  The
flow control was intentionally disabled due to silicon bug.

DM&P Electronics, Inc. provided all necessary information including
sample board to write driver and answered many questions I had.
Many thanks for their support of FreeBSD.

H/W donated by:	DM&P Electronics, Inc.
2010-12-31 00:21:41 +00:00
imp
fdd4426c6a Revert r216777, per jhb@ 2010-12-28 22:45:29 +00:00
imp
d20b96d0f2 Comment out npx and isa from NOTES file. We don't need them here
since DEFAULTS already pulls them in.
2010-12-28 21:22:08 +00:00
imp
9fe1a3e4f4 Remove mem, io, isa and npx since they are duplicative of the entries
in DEFAULTS.  Saves 8 lines of warnings when we build XBOX.
2010-12-28 21:20:58 +00:00
cperciva
871e71c2db Build the modules which can be built. The excluded modules fall into two
categories: Those which can't build with PAE because they attempt to cast
a pointer to a bus_addr_t (mostly scsi drivers); and those which can't be
built with XEN because they conflict with something in xen-os.h (e.g., in
cxgb there is a conflicting definition of test_and_clear_bit).

MFC after:	1 week
2010-12-27 23:59:27 +00:00
davidxu
b9eeaa21c2 Now userland POSIX semaphore is based on umtx. The kernel module
is only used to support binary compatible, if want to run old
binary, you need to kldload the module.
2010-09-24 09:04:16 +00:00
nork
9673f78b29 Add support 'device tpm' for amd64.
Add tpm(4)'s default setting to /boot/defaults/loader.conf.
Add 'device tpm' to NOTES for amd64 and i386.

Discussed with:	takawata
Approved by:	imp (mentor)
2010-09-19 14:40:37 +00:00
bschmidt
f5f8eecb32 Fix whitespace nits.
PR:		conf/148989
Submitted by:	pluknet <pluknet at gmail.com>
MFC after:	3 days
2010-08-06 18:46:27 +00:00
mdf
6857471cf3 Add MALLOC_DEBUG_MAXZONES debug malloc(9) option to use multiple uma
zones for each malloc bucket size.  The purpose is to isolate
different malloc types into hash classes, so that any buffer overruns
or use-after-free will usually only affect memory from malloc types in
that hash class.  This is purely a debugging tool; by varying the hash
function and tracking which hash class was corrupted, the intersection
of the hash classes from each instance will point to a single malloc
type that is being misused.  At this point inspection or memguard(9)
can be used to catch the offending code.

Add MALLOC_DEBUG_MAXZONES=8 to -current GENERIC configuration files.
The suggestion to have this on by default came from Kostik Belousov on
-arch.

This code is based on work by Ron Steinke at Isilon Systems.

Reviewed by:    -arch (mostly silence)
Reviewed by:    zml
Approved by:    zml (mentor)
2010-07-28 15:36:12 +00:00
rpaulo
ce6b8c2746 Remove the acpi_aiboost driver. It has been replaced by aibs(4). 2010-07-25 17:55:57 +00:00
mav
4e6cef612e Add hints for i8254 timer on i386 and amd64. Some people report about
systems with PnP/ACPI not reporting i8254 timer. In some cases it can be
fatal, as i8254 can be the only available time counter hardware. From other
side we are now heavily depend on i8254 timer and till the last time it's
init/usage was completely hardcoded. So this change just restores previous
behavior in more regular fashion.
2010-07-16 23:21:46 +00:00
bschmidt
6ac2f4bf60 - Update 6000 firmware to 9.221.4.1
- Add 6050 firmware

MFC after:	2 weeks
2010-07-15 11:26:07 +00:00
rpaulo
5bba5f6503 Import the acpi_aibs(4) driver written by Constantine A. Murenin.
It has more features than acpi_aiboost(4) and it will eventually replace
acpi_aiboost(4).

Submitted by:	Constantine A. Murenin <cnst at FreeBSD.org>
Reviewed by:	freebsd-acpi, imp
MFC after:	1 month
2010-06-25 15:32:46 +00:00
kib
3fc50687aa Only enable kdtrace hook in the LINT on the architectures that implement it. 2010-06-18 18:51:09 +00:00
thompsa
bd3f3db8dd Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had
the illusion of a tunable setting but was always turned on regardless.

MFC after:	1 week
2010-04-22 21:31:34 +00:00
yongari
04d9731c75 Add driver for Silicon Integrated Systems SiS190/191 Fast/Gigabit Ethernet.
This driver was written by Alexander Pohoyda and greatly enhanced
by Nikolay Denev. I don't have these hardwares but this driver was
tested by Nikolay Denev and xclin.

Because SiS didn't release data sheet for this controller, programming
information came from Linux driver and OpenSolaris. Unlike other open
source driver for SiS190/191, sge(4) takes full advantage of TX/RX
checksum offloading and does not require additional copy operation in
RX handler.
The controller seems to have advanced offloading features like VLAN
hardware tag insertion/stripping, TCP segmentation offload(TSO) as
well as jumbo frame support but these features are not available
yet. Special thanks to xclin <xclin<> cs dot nctu dot edu dot tw>
who sent fix for receiving VLAN oversized frames.
2010-04-14 20:45:33 +00:00
delphij
1d097a47c3 Back out revision 205307.
For the record:

CPU_ENABLE_SSE enables some code that dynamically enables SSE support
but not necessarily enforce execution of SSE instructions.
2010-03-19 16:09:57 +00:00
delphij
a88b384280 SSE is enabled by default about 5 years ago so there is no point pretending
that we support I486 and I586 CPUs in the GENERIC kernel, users wants these
support would have to build a custom kernel to explicitly disable SSE
anyways.

MFC after:	1 month
2010-03-19 01:16:53 +00:00
ed
6cb70302d9 Remove COMPAT_43TTY from stock kernel configuration files.
COMPAT_43TTY enables the sgtty interface. Even though its exposure has
only been removed in FreeBSD 8.0, it wasn't used by anything in the base
system in FreeBSD 5.x (possibly even 4.x?). On those releases, if your
ports/packages are less than two years old, they will prefer termios
over sgtty.
2010-03-13 09:21:00 +00:00
jhb
da95673165 Make NKPT a kernel option on i386 so that it can be set to a non-default
value from kernel config files.

Tested by:	Charles Sprickman  spork of bway net
MFC after:	2 weeks
2010-03-10 19:50:52 +00:00
kmacy
b545eb8d42 remove atkbd from default config to avoid pulling in real-mode bios emulation 2010-02-21 01:06:07 +00:00
attilio
b9f41eb470 Adjust style (following the already existing rules) for the newly
introduced option DEADLKRES.

Reported by:	danfe, julian, avg
2010-02-15 23:44:48 +00:00
attilio
184538e270 Add the options DEADLKRES (introducing the deadlock resolver thread) in
the 'debugging' section of any HEAD kernel and enable for the mainstream
ones, excluding the embedded architectures.
It may, of course, enabled on a case-by-case basis.

Sponsored by:	Sandvine Incorporated
Requested by:	emaste
Discussed with:	kib
2010-02-10 16:30:04 +00:00
brucec
36b8524222 Update documentation for the iwn and iwnfw drivers: they support the 1000, 5150, 6000 and 6050 devices too, with firmware modules for the 4965, 1000, 5000, 5150 and 6000.
Add documentation for mwl and all the wireless firmware drivers.

Approved by:	rrs (mentor)
2010-02-08 21:38:42 +00:00
rnoland
4f2c2891b7 Welcome drm support for VIA unichrome chips.
MFC after:	2 weeks
2010-01-31 14:30:39 +00:00
jhb
0ab6ce0ba0 Move the examples for the 'hints' and 'env' keywords from various GENERIC
kernel configs into NOTES.

Reviewed by:	imp
2010-01-19 17:20:34 +00:00
imp
80a1a3fce5 Add INCLUDE_CONFIG_FILE in GENERIC on all non-embedded platforms.
# This is the resolution of removing it from DEFAULTS...

MFC after:	5 days
2010-01-10 17:44:22 +00:00