leaks. We assume each source can be taken / dropped only once and
don't recurse. These are only enabled via DA_TRACK_REFS or
INVARIANTS. There appreas to be a reference leak under extreme load,
and these should help us colaberatively work it out. It also documents
better the reference / holding protocol better.
Reviewed by: ken@, scottl@
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14040
device still wind up in xpt_done after the path has been
invalidated. Since we don't always need sim or devq, add some guard
rails to only fail if we have to use them.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14040
bottom of the file, where it is in most imx5/6 drivers. Switch from an RD2
macro using bus_space_read_2() to an inline function using bus_read_2();
likewise for WR2. Use RESOURCE_SPEC_END to end the resource_spec list.
Net effect should be no functional changes.
The header passed to these probes has some fields converted to host
order by tcp_fields_to_host(), so the tcpinfo_t translator doesn't do
what we want.
Submitted by: Hannes Mehnert
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D12647
Sometimes 32 bit and 64 bit ioctls are represented by the same number.
It causes unnecessary switch to 32 bit commpatible mode.
This patch prevents switching when we are dealing with 64 bit executable.
It fixes issue mentioned here
Authored by: Patryk Duda <pdk@semihalf.com>
Submitted by: Wojciech Macek <wma@semihalf.com>
Reviewed by: andrew, wma
Obtained from: Semihalf
Sponsored by: IBM, QCM Technologies
Differential revision: https://reviews.freebsd.org/D14023
Build with rtl8366rb has been broken due to incorrect retrieval of pointer
to device_t.
Reported by: lwhsu
Differential Revision: https://reviews.freebsd.org/D14044
This patch is cosmetic. It checks if allocation of ifnet structure failed.
It's better to have this check rather than assume positive scenario.
Submitted by: Dmitry Luhtionov <dmitryluhtionov@gmail.com>
Reported by: Dmitry Luhtionov <dmitryluhtionov@gmail.com>
Properly honor the lack of the CRD_F_IV_PRESENT flag in the GCM
software fallback case for encryption requests.
Submitted by: Harsh Jain @ Chelsio
Sponsored by: Chelsio Communications
In particular, this avoids edge cases where a generated IV might be
written into the output buffer even though the request is failed with
an error.
Sponsored by: Chelsio Communications
- Extend ccr_gcm_soft() to handle requests with a non-empty payload.
While here, switch to allocating the GMAC context instead of placing
it on the stack since it is over 1KB in size.
- Allow ccr_gcm() to return a special error value (EMSGSIZE) which
triggers a fallback to ccr_gcm_soft(). Move the existing empty
payload check into ccr_gcm() and change a few other cases
(e.g. large AAD) to fallback to software via EMSGSIZE as well.
- Add a new 'sw_fallback' stat to count the number of requests
processed via the software fallback.
Submitted by: Harsh Jain @ Chelsio (original version)
Sponsored by: Chelsio Communications
This works around an issue in the T6 that can result in DMA engine
stalls if an error occurs while processing a DSGL entry with a length
larger than 2KB.
Submitted by: Harsh Jain @ Chelsio
Sponsored by: Chelsio Communications
Most crypto requests will not trigger this condition, but a request
with a highly-fragmented data buffer (and a resulting "large" S/G
list) could trigger it.
Sponsored by: Chelsio Communications
The T6 can hang when processing certain AEAD requests if the request
sets a flag asking the crypto engine to discard the input IV and AAD
rather than copying them into the output buffer. The existing driver
always discards the IV and AAD as we do not need it. As a workaround,
allocate a single "dummy" buffer when the ccr driver attaches and
change all AEAD requests to write the IV and AAD to this scratch
buffer. The contents of the scratch buffer are never used (similar to
"bogus_page"), and it is ok for multiple in-flight requests to share
this dummy buffer.
Submitted by: Harsh Jain @ Chelsio (original version)
Sponsored by: Chelsio Communications
The T6 crypto engine's control messages only support a total AAD
length (including the prefixed IV) of 511 bytes. Reject requests with
large AAD rather than returning incorrect results.
Sponsored by: Chelsio Communications
Combined authentication-encryption and GCM requests already stored the
IV in the immediate explicitly. This extends this behavior to block
cipher requests to work around a firmware bug. While here, simplify
the AEAD and GCM handlers to not include always-true conditions.
Submitted by: Harsh Jain @ Chelsio
Sponsored by: Chelsio Communications
Fix a vulnerability in IPsec-IPv6-AH, that allows an attacker to remotely
crash the kernel with a single packet.
In this loop we need to increment 'ad' by two, because the length field
of the option header does not count the size of the option header itself.
If the length is zero, then 'count' is incremented by zero, and there's
an infinite loop. Beyond that, this code was written with the assumption
that since the IPv6 packet already went through the generic IPv6 option
parser, several fields are guaranteed to be valid; but this assumption
does not hold because of the missing '+2', and there's as a result a
triggerable buffer overflow (write zeros after the end of the mbuf,
potentially to the next mbuf in memory since it's a pool).
Add the missing '+2', this place will be reinforced in separate commits.
Reported by: Maxime Villard <maxv at NetBSD.org>
MFC after: 1 week
When allocating memory through malloc(9), we always expect the amount of
memory requested to be unsigned as a negative value would either stand for
an error or an overflow.
Unsign some values, found when considering the use of mallocarray(9), to
avoid unnecessary casting. Also consider that indexes should be of
at least the same size/type as the upper limit they pretend to index.
MFC after: 2 weeks
in the LinuxKPI. The old implementation assumed only one IDR layer was present.
Take additional IDR layers into account when computing the "id" value.
MFC after: 1 week
Found by: Karthik Palanichamy <karthikp@chelsio.com>
Tested by: Karthik Palanichamy <karthikp@chelsio.com>
Sponsored by: Mellanox Technologies
specified in the arg1 into ICMPv6 destination unreachable code according
to RFC7915.
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
Added CTLFLAG_VNET to net.link.lagg.lacp.default_strict_mode which was missed
in r290450.
Reported by: julian@
MFC after: 1 week
Sponsored by: Multiplay
Fix a bug when the system has no CPU 0. When created, threads were implicitly assigned to CPU 0.
This had no practical effect since a real CPU was chosen immediately by the scheduler. However,
on systems without a CPU 0, sched_ule attempted to access the scheduler queue of the "old" CPU
when assigned the initial choice of the old one. This caused an attempt to use illegal memory
and a crash (or, more usually, a deadlock). Fix this by assigned new threads to the BSP
explicitly and add some asserts to see that this problem does not recur.
Authored by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Differential revision: https://reviews.freebsd.org/D13932
the first mbuf of the reassembled datagram should have a pkthdr.
This was discovered with cxgbe(4) + IPSEC + ping with payload more than
interface MTU. cxgbe can generate !M_WRITEABLE mbufs and this results
in m_unshare being called on the reassembled datagram, and it complains:
panic: m_unshare: m0 0xfffff80020f82600, m 0xfffff8005d054100 has M_PKTHDR
PR: 224922
Reviewed by: ae@
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D14009
pf_unlink_state() releases a reference to the state without checking if
this is the last reference. It can't be, because pf_state_insert()
initialises it to two. KASSERT() that this is always the case.
CID: 1347140
The driver now ensures only one thread at a time is running in the API
functions (clock_gettime() and clock_settime()) by specifically requesting
ownership of the i2c bus without using IIC_RECURSIVE, then it does all IO
using IIC_RECURSIVE so that each individual IO operation doesn't try to
re-acquire the bus.
The other IO done by the driver happens at attach or intr_config_hooks time,
when there can't be multiple threads running with the same device instance.
So, the IIC_RECURSIVE flag can be safely ORed into the wait flags for all IO
done by the driver, because it's all either done in a single-threaded
environment, or protected within a block bounded by explict
iicbus_acquire_bus() and iicbus_release_bus() calls.
The driver now ensures only one thread at a time is running in the API
functions (clock_gettime() and clock_settime()) by specifically requesting
ownership of the i2c bus without using IIC_RECURSIVE, then it does all IO
using IIC_RECURSIVE so that each individual IO operation doesn't try to
re-acquire the bus.
The other IO done by the driver happens at attach or intr_config_hooks time,
when there can't be multiple threads running with the same device instance.
So, the IIC_RECURSIVE flag can be safely ORed into the wait flags for all IO
done by the driver, because it's all either done in a single-threaded
environment, or protected within a block bounded by explict
iicbus_acquire_bus() and iicbus_release_bus() calls.
The recursive ownership support added in r321584 was unconditionally in
effect all the time -- whenever a given i2c slave device instance tried to
lock the i2c bus for exclusive use when it already owned the bus, the call
returned immediately without waiting. However, many i2c slave drivers use
bus ownership to enforce that only a single thread at a time can be using
the slave device. The recursive locking changes broke this use case.
Now there is a new flag, IIC_RECURSIVE, which can be mixed in with the
other flags passed to iicbus_acquire_bus() to allow drivers to indicate
when recursive locking is desired. Using the flag implies that the driver
is managing concurrent access to the device by different threads in some way.
This immediately fixes all existing i2c slave drivers except for the two
i2c RTC drivers which use the recursive locking feature; those will be
fixed in a followup commit.
