fdcontrol/fdcontrol.c:
- Add const constraint to an intermediate value
which is not supposed to be changed elsewhere.
fdread/fdread.c:
- Use _devname in favor of devname to avoid name
conflicit.
- -1 is less than any positive number so in order
to get the block to function, we should get the
block a little earlier.
- Cast to remove signed when we are sure that a
return value is positive, or is compared with
an positive number (tracknumber of a floppy
disk is not likely to have UINT_MAX/2 anyway)
fdread/fdutil.c:
- Use more specific initializer
fdwrite/fdwrite.c:
- Use static on format_track since it's not
referenced in other places.
- Use const char* to represent string constant.
Bump WARNS accordingly.
This example caused me to incorrectly believe that you must use the
generic device nodes when you can in fact use either. It's often better
to use the driver specific node.
device is involved, (e.g. plugin a hub with multiple devices
already attached to it)
Submitted by: Naoyuki Tai <ntai@smartfruit.com>
PR: 43993
MFC in: 1 week
so remove argc and argv from main() argument.
At the same time, user and tt is not likely to be changed during
execution so mark them const.
This commit should guarantee nologin to pass WARNS=6.
Tested on: i386
MFC After: 1 month
parameter 2 in chmod(2), which is a mode_t (and in turn a __uint_16_t),
it's more likely that it should be defined as an unsigned variable.
This commit should make newsyslog WARNS=6 clean, but don't bump the knob
until I have a universe build.
MFC After: 1 month
for calculating the job number for a job based on the control-file name.
We might receive cf-files named by other implementations of lpr, where
the job number shown by lpq would not match the job number that other
commands expected for the same name.
This also uses a newer algorithm for determining a job number, to avoid
problems caused when a control-file is named using an IP address, instead
of the hostname.
This also moved the declaration if isowner() from lp.h to rmjob.c. When I
went to change the parameters, I noticed that rmjob.c was the only source
file which uses it.
MFC after: 2 weeks
control-file for each print job. This is partially because the previous
checks still let through some characters which would cause trouble for
other applications which try to process the resulting userid -- such as
accounting programs.
But the main reason is to handle the case where some remote host sends a
print job where the given userid is an uppercase-version of the real userid.
For that case, lpd will now check for uppercase letters in the userid. If
there are any, it will check to see if the given userid (with the uppercase
letters) is a valid one. If it is *not* valid, then lpd will change the
userid to all-lowercase right when the job is received.
MFC after: 2 weeks
than a colon, so don't allow whitespace in program names. To be
consistent with hostnames, don't allow whitespace in the program
name specifiers in syslog.conf either.
(The first change is by Markus from the PR, the second is mine.)
PR: 68691
Submitted by: Markus Oestreicher <m.oe@x-trader.de>
MFC after: 3 weeks
disk. This is main reason why sysinstall presents SCSI CDROM to
available disks in Fdisk/Label menu. In addition, adding a blank
SCSI CDROM to the menu generates floating point exception in sparc64.
Disk_Names() just extracts sysctl "kern.disks". Why GEOM treats SCSI
CDROM as a disk is beyond me and that should be investigated.
For temporary workaround, ignore SCSI CDROM device.
PR: sparc64/72962
Tested by: R. Tyler Ballance < tyler AT tamu DOT edu>
MFC after: 1 week
the file will be created with the right access, if the call to open()
does create it. Also fix the other call to umask() to turn off
"write others", just as a matter of general safety.
PR: 74418
MFC after: 4 days
sure the data file has been completely transfered before starting to
print it. This is needed because some implementations of lpr will send
the control-file for a print job before sending the matching data-files,
and that can cause problems if the receiving host is a busy print-server.
MFC after: 2 weeks
This allows LCP ECHOs to be enabled independently of LQR reports.
Note: This introduces a change in the default behaviour (search for lqr and
echo in the man page). I'll update UPDATING to reflect this.
PR: 74821
Add ``disable NAS-IP-Address'' and ``disable NAS-Identifier'' options to
support pre-rfc2865 RADIUS servers.
This pushes our enable/disable items over the 32 bit limit, so reoganise
things to allow a bunch more options.
Go to version 3.4.1 so that any compatability problems can be identified.
units (as specified in _BIF). (noted by Bruno Ducrot)
o In looking in the standard, if the cap numbers are 0xffffffff, then acpi
is reporting unknown for that field. Report unknown numbers properly.
o Update the state to reflect charging, discharging and critical.
my patches for this information. Commit my more complete version.
This version isn't complete yet, since some details aren't handled
right just yet.
Poaching by: phk
hence bump it to 6.
Note that the last commit message was not quite accurate. While the
assumption exists in the code, it's not possible to have an
uninitialized p there because if lflag is set when username is NULL
then execution would be terminated earlier.
- Allow the upload directory to be optional. If the upload directory
field is cleared to the empty string then no directory will be created.
- Don't create a bin/ subdirectory in ftp's home dir containing ls(1) and
date(1) as ftpd(8) no longer requires it.
- Create a pwd.db file in etc/ instead of a passwd file.
- Ignore NIS compat entries in /etc/group and /etc/master.passwd when
building the anonymous files.
PR: bin/60662
Submitted by: Olafur Osvaldsson oli at isnic dot is
If turned on no NIS support and related programs will be built.
Lost parts rediscovered by: Danny Braniss <danny at cs.huji.ac.il>
PR: bin/68303
No objections: des, gshapiro, nectar
Reviewed by: ru
Approved by: rwatson (mentor)
MFC after: 2 weeks
http://www.securityfocus.com/archive/1/379450
This patch is based on dillon's patch on DragonFlyBSD, which is in
turn derived from OpenBSD's src/usr.sbin/pppd/cbcp.c,v 1.6.
Obtained from: OpenBSD via DragonFlyBSD
Encouraged by: nectar
This commit does not affect the code generated, as proven by md5'ing
resulting binaries.
Bump WARNS accordingly.
Compiled on: sparc64, ia64, i386
Reviewed by: alfred (but blame me if anything goes wrong :-)
syslog(3) if we are a priveleged program (sshd, su, etc.).
- Make syslogd open an additional socket /var/run/logpriv, with 0600
permissions.
- In libc, try to use this socket.
- Do not loop forever if we are using this socket (partial backout of 1.31)
Reviewed by: dwmalone, Andrea Campi <andrea webcom it>
Approved by: julian (mentor)
MFC after: 1 month
remove limit for 20 sockets.
- Add possibility to specify file mode for sockets created with '-l'.
- Check that socket name in '-l' is absolute.
Reviewed by: dwmalone, Andrea Campi <andrea webcom it>
Approved by: julian (mentor)
to PRECIOUSLIB from bsd.lib.mk. The side effect of this
is making installing the world under jail(8) possible by
using another knob, NOFSCHG.
Reviewed by: oliver
the implementation of the following feature in revision 1.4:
- Install Makefile.yp as /var/yp/Makefile.dist and link it to
/var/yp/Makefile only if /var/yp/Makefile doesn't already exist.
Suggested by Peter Wemm.
The actual code was only symlinking when no /var/yp/Makefile.dist
existed, i.e., never.
Since we can only override the DSDT, a custom ASL dumped previously that
contained SSDTs would result in lots of multiple definition errors.
A longer-term fix involves adding the ability to override SSDTs to ACPI-CA.
MFC after: 3 days
Disable some code which magics minor numbers into card/port numbers.
I think we will have to parse this from the device name in the future,
but I need to confer with peter@ about this.
Put sicontrol back in the build.
Troublespotter: dwhite
NO_BIND_DNSSEC, NO_BIND_ETC, NO_BIND_NAMED, and NO_BIND_UTILS.
2. Make creation of directories in /usr/include that are only needed
in the WITH_BIND_LIBS case conditional.
Reviewed by: ru, des
with this configuration, but Ruslan tells me that I was probably mistaken,
and on retest the .5 pages are being installed just fine.
Therefore reverse the MAN[58] change in favor of the more modern syntax.
Submitted by: ru
1. Install man files and links for the lwres library.
2. Fix the path in various files to say /etc/namedb/ instead of just /etc.
3. Correctly install the conf file man pages for named and rndc.
