Commit Graph

16 Commits

Author SHA1 Message Date
Sofian Brabez
61bfd86762 Use DEVMETHOD_END macro defined in sys/bus.h instead of {0, 0} sentinel on device_method_t arrays
Reviewed by:	cognet
Approved by:	cognet
2013-01-30 18:01:20 +00:00
Jung-uk Kim
4affd62610 Fix a regression from r200554, which broke fdc(4) attachment to acpi(4).
I removed too many lines and a wrong pointer was accidentally passed down.

Tested by:	Scott Allendorf (scott-allendorf at uiowa dot edu), kib
MFC after:	3 days
2010-05-30 03:45:41 +00:00
Jung-uk Kim
871d21ce2d Remove _FDE quirk handling as these quirks are automatically repaired
by ACPICA layer since ACPICA 20091214.
2009-12-14 22:28:32 +00:00
Jung-uk Kim
129d3046ef Import ACPICA 20090521. 2009-06-05 18:44:36 +00:00
Nate Lawson
ce1a23d397 Remove unused variable.
Coverity ID:	558
Found by:	Coverity Prevent
2006-02-21 03:19:24 +00:00
David E. O'Brien
2a191126de Canonize the include of acpi.h. 2005-09-11 18:39:03 +00:00
John Baldwin
30b490009b Only fall back to probing the floppy drives via hints if there is a failure
in the actual _FDE parsing.  If the failure occurs earlier such as in
fdc_attach() then don't try to probe any drives.

MFC after:	3 days
Reviewed by:	njl
Tested by:	Christian Laursen xi at borderworlds dot dk
2004-09-29 19:08:34 +00:00
Warner Losh
27df52f999 The long dead hand of the past has pushed forward useless bits in this
driver.  Trim its fingernails by removing some useless bits before
fixing the 'thread not terminated on detach' problem.

o dmacnt is no longer used now that we allocate at attach time.  Remove
  it from struct fdc_data.
o ISPNP was only ever set, but never tested.  It used to be used for the
  allocation routines to change how it allocated resources.  Since that's
  no longer necessary, retire the flag.
o ISPCMICA was only ever tested, but never set.  GC it.  This removes
  a special case in determining the drive type.  The drive type is
  now set in fdc_pcmcia.c, so the hack isn't needed anymore.  Sadly,
  this isn't tested with a Y-E Data pcmcia floppy drive because there
  are a number of other issues that preclude it from working.
o Fix ifdef for reading from the rtc.  I'm of the opinion that this ifdef
  should be moved into fdc_isa.c, but not today as ideally there'd be
  other fixes to the probing of children.  So now we just read it on
  i386 ! pc98 (there's no #define for MACHINE_ARCH, just MACHINE, hence
  this slightly inelegant kludge) and amd64.  The PC98 exclusion likely
  isn't meaningful since pc98 uses a different driver, but will be when
  merging of the pc98 floppy code into this driver is complete (this is the
  other reason I think this block of code belongs outside fdc.c).

All of these changes are safe to MT5.
2004-09-17 18:50:38 +00:00
Nate Lawson
a3f51d1971 Handle _FDE results of 5 bytes (vs. 5 uint32_t's). BIOS vendors find yet
another way to misinterpret the spec.  Also, always fall back to the hints
probe on any attach failure, not just when _FDE fails.

Thanks to imp and scottl for finding this.

Tested by:	rwatson (minimally)
MFC after:	5 days
2004-09-17 04:14:38 +00:00
Warner Losh
f6ddde7cfa default: case shouldn't set an error yet either. 2004-09-16 06:37:05 +00:00
Warner Losh
ee9e2737a1 For the moment, treat failures to attach floppy drives as non-fatal
errors for the attachment process for the floppy controller.  This is
a band-aide because it doesn't try any of the fallback methods when
_FDE isn't long enough, but should be sufficient for people
experiencing the dreaded mutex not initialized panic.
2004-09-16 01:51:21 +00:00
Nate Lawson
885128efdc Fix _FDI drive type probing. The new fd child is not an ACPI device while
the old one is.  Hence we need to evaluate the old one for _FDI since it
has a valid ACPI_HANDLE ivar.  This is a minimal fix.  Make a note that a
more complete one is to make fdc support the ACPI_HANDLE ivar for its
children.

This and the previous change are MT5 candidates.
2004-08-30 21:35:34 +00:00
Nate Lawson
f40c77a223 Fix _FDE probing by using the buffer contents instead of the buffer
object itself.  ACPI-CA returns an ACPI_OBJECT of type Buffer rather than
the buffer contents itself.
2004-08-30 21:13:03 +00:00
Poul-Henning Kamp
1b67be7b75 Rewrite of the floppy driver to make it MPsafe & GEOM friendly:
Centralize the fdctl_wr() function by adding the offset in
	the resource to the softc structure.

	Bugfix: Read the drive-change signal from the correct place:
	same place as the ctl register.

	Remove the cdevsw{} related code and implement a GEOM class.

	Ditch the state-engine and park a thread on each controller
	to service the queue.

	Make the interrupt FAST & MPSAFE since it is just a simple
	wakeup(9) call.

	Rely on a per controller mutex to protect the bioqueues.
	Grab GEOMs topology lock when we have to and Giant when
	ISADMA needs it.  Since all access to the hardware is
	isolated in the per controller thread, the rest of the
	driver is lock & Giant free.

	Create a per-drive queue where requests are parked while
	the motor spins up.  When the motor is running the requests
	are purged to the per controller queue.  This allows
	requests to other drives to be serviced during spin-up.

	Only setup the motor-off timeout when we finish the last
	request on the queue and cancel it when a new request
	arrives.  This fixes the bug in the old code where the motor
	turned off while we were still retrying a request.

	Make the "drive-change" work reliably.  Probe the drive on
	first opens.  Probe with a recal and a seek to cyl=1 to
	reset the drive change line and check again to see if we
	have a media.

	When we see the media disappear we destroy the geom provider,
	create a new one, and flag that autodetection should happen
	next time we see a media (unless a specific format is configured).

	Add sysctl tunables for a lot of drive related parameters.
	If you spend a lot of time waiting for floppies you can
	grab the i82078 pdf from Intels web-page and try tuning
	these.

	Add sysctl debug.fdc.debugflags which will enable various
	kinds of debugging printfs.

	Add central definitions of our well known floppy formats.

	Simplify datastructures for autoselection of format and
	call the code at the right times.

	Bugfix: Remove at least one piece of code which would have
	made 2.88M floppies not work.

	Use implied seeks on enhanced controllers.

	Use multisector transfers on all controllers.  Increase
	ISADMA bounce buffers accordingly.

	Fall back to single sector when retrying.  Reset retry count
	on every successful transaction.

	Sort functions in a more sensible order and generally tidy
	up a fair bit here and there.

	Assorted related fixes and adjustments in userland utilities.

WORKAROUNDS:
	Do allow r/w opens of r/o media but refuse actual write
	operations.  This is necessary until the p4::phk_bufwork
	branch gets integrated (This problem relates to remounting
	not reopening devices, see sys/*/*/${fs}_vfsops.c for details).

	Keep PC98's private copy of the old floppy driver compiling
	and presumably working (see below).

TODO (planned)

	Move probing of drives until after interrupts/timeouts work
	(like for ATA/SCSI drives).

TODO (unplanned)

	This driver should be made to work on PC98 as well.

	Test on YE-DATA PCMCIA floppy drive.

	Fix 2.88M media.

This is a MT5 candidate (depends on the bioq_takefirst() addition).
2004-08-20 15:14:25 +00:00
Nate Lawson
20819082dc Fix ACPI floppy enumeration for three types of divergent behavior.
* Some systems have _FDE and child floppy devices, but no _FDI.  This seems
  to be compatible with the standard.  Don't error out if there is no _FDI.
  Instead, continue on to the next device.  The normal fd probe will take
  care of this device.
* Some systems have _FDE but no child devices in AML.  For these, add a
  second pass that compares the results of _FDE to the presence of devices.
  If not present, add the missing device.
* Some BIOS authors didn't read the spec.  They use tape drive values for
  all fdc(4) devices.  Since this isn't grossly incompatible with the
  required boolean value, use them.  They also define the _FDE items as a
  package instead of buffer.  Regenerate the buffer from the package if it
  is present.

Tested by:	tjr, marcel
2004-07-28 22:35:41 +00:00
Nate Lawson
a54c9cb131 Add an ACPI floppy drive attachment that probes via the _FDE and _FDI
methods.  It also now handles ordinary floppy drive probing for drives
attached to ACPI.

Reviewed by:	imp
2004-07-15 16:38:07 +00:00