bootonce feature is temporary, one time boot, activated by
"bectl activate -t BE", "bectl activate -T BE" will reset the bootonce flag.
By default, the bootonce setting is reset on attempt to boot and the next
boot will use previously active BE.
By setting zfs_bootonce_activate="YES" in rc.conf, the bootonce BE will
be set permanently active.
bootonce dataset name is recorded in boot pool labels, bootenv area.
in case of nextboot, the nextboot_enable boolean variable is recorded in
freebsd:nvstore nvlist, also stored in boot pool label bootenv area.
On boot, the loader will process /boot/nextboot.conf if nextboot_enable
is "YES", and will set nextboot_enable to "NO", preventing /boot/nextboot.conf
processing on next boot.
bootonce and nextboot features are usable in both UEFI and BIOS boot.
To use bootonce/nextboot features, the boot loader needs to be updated on disk;
if loader.efi is stored on ESP, then ESP needs to be updated and
for BIOS boot, stage2 (zfsboot or gptzfsboot) needs to be updated
(gpart or other tools).
At this time, only lua loader is updated.
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25512
The current default is provided in various Makefile.inc in some top-level
directories and covers a good portion of the tree, but doesn't cover parts
of the build a little deeper (e.g. libcasper).
Provide a default in src.sys.mk and set WARNS to it in bsd.sys.mk if that
variable is defined. This lets us relatively cleanly provide a default WARNS
no matter where you're building in the src tree without breaking things
outside of the tree.
Crunchgen has been updated as a bootstrap tool to work on this change
because it needs r365605 at a minimum to succeed. The cleanup necessary to
successfully walk over this change on WITHOUT_CLEAN builds has been added.
There is a supplemental project to this to list all of the warnings that are
encountered when the environment has WARNS=6 NO_WERROR=yes:
https://warns.kevans.dev -- this project will hopefully eventually go away
in favor of CI doing a much better job than it.
Reviewed by: emaste, brooks, ngie (all earlier version)
Reviewed by: emaste, arichardson (depend-cleanup.sh change)
Differential Revision: https://reviews.freebsd.org/D26455
(default: WITH_GH_BC) and 12-STABLE (default: WITHOUT_GH_BC).
Since the new implementation of bc and dc is optionally available in
12-STABLE, I intend to MFC these descriptions for inclusion in 12.2.
MFC after: 3 days
In D12421, the ability to compile stand/ in little-endian was added, with the
intention to extend loader.kboot to run in Petitboot.
However, no further work was done, as the kernel then gained self-execution
capabilities as Petitboot was taught to load FreeBSD kernels directly.
The FreeBSD installer on powerpc64 (on POWER8 and POWER9) uses
/boot/etc/kboot.conf instead of loader.
As this option does nothing but cause stand/ to be miscompiled and actively
causes confusion, remove it.
(I have a functioning petitboot loader in my local tree, however, it turned
out to be quite inconvient to use due to the current petitboot plugin design
so I put it on hold.)
Reviewed by: emaste, imp, jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26430
The floppy test passes with this. The others fail due to 'integrity
checks' failing in GPART. It's not at all clear those integrity
checks are legit or if the test samples were bogusly generated
by FreeBSD.
These images are no longer relevant... However, I've also not tested
the regression test here to see if it still works or not... It needs
a lot of love regardless...
Currently, WITHOUT_PORTSNAP forces WITHOUT_FREEBSD_UPDATE because the
latter relies on phttpget, which lives inside the portsnap build bits.
Remove the dependency between these two options by moving phttpget out into
^/libexec and building/installing it if either WITH_PORTSNAP or
WITH_FREEBSD_UPDATE.
Future work could remove the conditional if it's decided that users will use
it independently of either the current in-base consumers.
Reported by: swills
Reviewed by: jilles, emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D26255
This allows use of the standard src.conf configuration for controlling
whether the tree is cleaned before build or not. The default is still
to clean.
Setting either NOCLEAN or NO_CLEAN will mention the new src.conf option.
NOCLEAN remains a .warning, while for now NO_CLEAN is .info.
Reviewed by: bdrewery (earlier version)
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22762
We have some hacks to remove stale dependency files for NO_CLEAN
builds that are missed by make's dependency handling. These are
intended to upport ongoing NO_CLEAN builds, and are no longer needed
after a sufficient amount of time elapses.
MK_MALLOC_PRODUCTION option on -CURRENT.
Also, for the sake of backwards compatibility, support the old way of
enabling 'production malloc', e.g. by adding a define in make.conf(5).
MFC after: 1 week
X-MFC-With: r365371
For historical reasons, defining MALLOC_PRODUCTION in /etc/make.conf has
been used to turn off potentially expensive debug checks and statistics
gathering in the implementation of malloc(3).
It seems more consistent to turn this into a regular src.conf(5) option,
e.g. WITH_MALLOC_PRODUCTION / WITHOUT_MALLOC_PRODUCTION. This can then
be toggled similar to any other source build option, and turned on or
off by default for e.g. stable branches.
Reviewed by: imp, #manpages
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26337
pmtimer was removed from base some time ago. apm hasn't been relevant
for these devices in a long time (and was commented out). Remove them
both from these config files.
-DNO_CLEAN builds have had trouble across the OpenZFS import. It's not
worth the effort to try to address this with any granularity; instead,
just trigger on a .depend file indicating a tree from before the import,
and remove the whole cddl object tree.
Reviewed by: mmacy, kevans
Differential Revision: https://reviews.freebsd.org/D26189
The most awkward bit in this patch is the bootstrapping of m4:
We can't simply use the host version of m4 since that is not compatible
with the flags passed by lex (at least on macOS, possibly also on Linux).
Therefore we need to bootstrap m4, but lex needs m4 to build and m4 also
depends on lex (which needs m4 to generate any files). To work around this
cyclic dependency we can build a bootstrap version of m4 (with pre-generated
files) then use that to build the real m4.
This patch also changes the xz/unxz/dd tools to always use the host version
since the version in the source tree cannot easily be bootstrapped on macOS
or Linux.
Reviewed By: brooks, imp (earlier version)
Differential Revision: https://reviews.freebsd.org/D25992
In most cases this simply builds the file from lib/libc for missing
functions (e.g. strlcpy on Linux etc.). In cases where this is not possible
I've added an implementation to tools/build/cross-build.
The fgetln.c/fgetwln.c/closefrom.c compatibility code was obtained from
https://gitlab.freedesktop.org/libbsd/libbsd, but I'm not sure it makes
sense to import it into to contrib just for these three bootstrap files.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D25978
These headers are required in order to build the bootstrap tools on macOS
and Linux. A follow-up commit will add implementations of functions that
don't exist on those operating systems to -legacy when bootstrapping.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D14316
The primary benefit is maintaining a completely shared
code base with the community allowing FreeBSD to receive
new features sooner and with less effort.
I would advise against doing 'zpool upgrade'
or creating indispensable pools using new
features until this change has had a month+
to soak.
Work on merging FreeBSD support in to what was
at the time "ZFS on Linux" began in August 2018.
I first publicly proposed transitioning FreeBSD
to (new) OpenZFS on December 18th, 2018. FreeBSD
support in OpenZFS was finally completed in December
2019. A CFT for downstreaming OpenZFS support in
to FreeBSD was first issued on July 8th. All issues
that were reported have been addressed or, for
a couple of less critical matters there are
pull requests in progress with OpenZFS. iXsystems
has tested and dogfooded extensively internally.
The TrueNAS 12 release is based on OpenZFS with
some additional features that have not yet made
it upstream.
Improvements include:
project quotas, encrypted datasets,
allocation classes, vectorized raidz,
vectorized checksums, various command line
improvements, zstd compression.
Thanks to those who have helped along the way:
Ryan Moeller, Allan Jude, Zack Welch, and many
others.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25872
Although I can't reproduce it, others are seeing different lex/yacc
programs always regenerated after my change to copy rather than
symlink the files. The reported fix is to add '-p' to the copies.
Since it doesn't hurt, go head and add it, though the reasons for
this mattering remain at best obscure and poorly articulated.
- Update tools/tools/locale to add make targets to automatically
generate locale source files. With this change, just typing
"make obj && make -j4" will rebuild them. Check README for more details.
- Fix issues in ja_JP ctypedef and range specification support
in utf8-rollup.pl.
- Add a temporary patch for UnicodeData.txt to fix code ranges of
CJK Ideograph Extension A and Extension B.
- tools/cldr2def.pl:
Use eucJP for ja_JP ctypedef because eucJP is not compatible with UTF-8.
- tools/convert_map.pl:
Add a verbose error message.
- tools/utf8-rollup.pl:
Normalize entries to use Unicode, not UTF-8.
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D25503
The -P flag is required by POSIX so we don't have to care whether pwd is
a shell builtin or not. This also allows removing pwd from the list of
bootstrap tools since all shells we care about for building have a
builtin pwd command. This effectively reverts r364190.
Suggested By: rgrimes, jrtc27
After r364166 and r364174, crunchgen needs a pwd binary in $PATH instead
of using a hardcoded absolute path. This commit is needed for
BUILD_WITH_STRICT_TMPPATH builds (currently not on by default).
libifconfig_sfp.h provides an API in libifconfig for querying SFP module
properties, operational status, and vendor strings, as well as descriptions
of the various fields, string conversions, and other useful helpers for
implementing user interfaces.
SFP module status is obtained by reading registers via an I2C interface.
Descriptions of these registers and the values therein have been collected
in a Lua table which is used to generate all the boilerplace C headers and
source files for accessing these values, their names, and descriptions.
The generated code is fully commented and readable.
This is the first use of libifconfig in ifconfig itself. For now, the
scope remains very limited. Over time, more of ifconfig will be replaced
with libifconfig.
Some minor changes to the formatting of ifconfig output have been made:
- Module memory hex dumps are indented one extra space as a result of using
hexdump(3) instead of a bespoke hex dump function.
- Media descriptions have an added two-character short-name in parenthesis.
- QSFP modules were incorrectly displaying TX bias current as power. Now
TX channels display bias current, and this change has been made for both
SFP and QSFP modules for consistency.
A Lua binding for libifconfig including this functionality is implemented
but has not been included in this commit. The plan is for it to be
committed after dynamic module loading has been enabled in flua.
Reviewed by: kp, melifaro
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25494
make copies instead.
There's too many times that we can't run the new binaries with old
libraries. Making the links when things are known to be 'safe' is a
nice optimization, but a copy of all the binaries is only 30MB, so
saving the copies at the cost of increased support when new symbols
are added and used as part of the bootstrap seems to be unwise.
There may be additional optimizations possible here, especially for
!FreeBSD hosts. However, that's beyond the scope of the problem I'm
trying to fix with make failing mid-way through an installworld across
change r363679. This optimization there caused us to run a new binary
with an old library once a new make was installed due to the symbolic
link. One could just copy make, but then other binaries fail as well,
so rather than play whack-a-mole, I opted to take us back to the old
way. Before r340157 or so we did copies (thogh of a lot fewer
artifacts), and we didn't have issues like this.
Reviewed by: arichards@
Differential Revision: https://reviews.freebsd.org/D25967
llvmorg-10.0.1-rc2-0-g77d76b71d7d.
Also add a few more llvm utilities under WITH_CLANG_EXTRAS:
* llvm-dwp, a utility for merging DWARF 5 Split DWARF .dwo files into
.dwp (DWARF package files)
* llvm-size, a size(1) replacement
* llvm-strings, a strings(1) replacement
MFC after: 3 weeks
* bugpoint.1
* clang.1
* llc.1
* lldb.1
* lli.1
* llvm-ar.1
* llvm-as.1
* llvm-bcanalyzer.1
* llvm-cov.1
* llvm-diff.1
* llvm-dis.1
* llvm-dwarfdump.1
* llvm-extract.1
* llvm-link.1
* llvm-mca.1
* llvm-nm.1
* llvm-pdbutil.1
* llvm-profdata.1
* llvm-symbolizer.1
* llvm-tblgen.1
* opt.1
Add newly generated manpages for:
* llvm-addr2line.1 (this is an alias of llvm-symbolizer)
* llvm-cxxfilt.1
* llvm-objcopy.1
* llvm-ranlib.1 (this is an alias of llvm-ar)
Note that llvm-objdump.1 is an exception, as upstream has both a plain
.1 file, and a .rst variant. These will have to be reconciled upstream
first.
MFC after: 3 days
clang-format is enabled conditional on either WITH_CLANG_EXTRAS or
WITH_CLANG_FORMAT. Some sources in libclang are build conditional on
either rule, and obviously the clang-format binary itself depends on the
rule.
clang-format could still use a manual page.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D25427
libucl comes with a Lua library binding. Build it into flua.
This lets us parse/generate config files in the various formats supported by
libucl with flua. For example, the following script will detect the format of
an object written to stdin as one of UCL config, JSON, or YAML and write it to
stdout as pretty-printed JSON:
local ucl = require('ucl')
local parser = ucl.parser()
parser:parse_string(io.read('*a'))
local obj = parser:get_object()
print(ucl.to_format(obj, 'json'))
Reviewed by: kevans, pstef
Approved by: mmacy (mentor)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25009
Prepare support to be able to handle font data in loader, consolidate
data structures to sys/font.h and update vtfontcvt.
vtfontcvt update is about to output set of glyphs in form of C source,
the implementation does allow to output compressed or uncompressed font
bitmaps.
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D24189
This is useful for tracking hardware provided AMSDU frames to see
when we're (a) seeing them, and (b) seeing the split between
intermediary and final frames.
Tested:
* QCA9880 (athp) - AP mode
As of r361857 all BINUTILS options are disabled by default - ports
have been changed to depend on binutils if they require GNU as, and
all base system assembly files have been switched to use Clang's
integrated assembler.
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
