of cpufreq(4) via a new man page est(4)
Document the two exposed tuneables of est(4).
I'd appreciate more reviews of content if possible. I gleaned
the information contained herein from sys/x86/cpufreq/est.c and
the Intel reference documentation
Reviewed by: wblock hrs gjb
MFC after: 2 weeks
written, but not msync'd by a process. A VOP_PUTPAGES()
called when VOP_RECLAIM() happens will usually fail, since
the NFSv4 Open has already been closed by VOP_INACTIVE().
Add a vm_object_page_clean() call to the NFSv4 client's
VOP_INACTIVE(), so that the write happens before the NFSv4
Open is closed. kib@ suggested using vgone() instead and
I will explore this, but this patch fixes things in the
meantime. For some reason, the VOP_PUTPAGES() is still
attaempted in VOP_RECLAIM(), but having this fail doesn't
cause any problems except a "stateid0 in write" being logged.
Reviewed by: kib
MFC after: 1 week
performing the return to usermode using full return path. This
consolidates the handling of exceptional situations in less number of
places, and is less code as well.
Reviewed by: jhb
MFC after: 1 week
for TX transfer completion as for reasons unknown this occasionally
causes SPI_SR_RXBUFF and SPI_SR_ENDRX to not rise.
In any case, once the RX part of the transfer is done it's obvious
that the preceding TX part had finished and checking of SPI_SR_TXEMPTY
was introduced to rule out a possible cause for the data corruption
mentioned in r236495 but which didn't turn out to be the problem
anyway.
MFC after: 3 days
and configurable on per-interface basis.
Remove __inline__ for several functions being called once per
flow (e.g once per 10-20 packets on common traffic flows).
Update manual page to simplify search for BPF data link types.
Sponsored by Yandex LLC
Reviewed by: glebius
Approved by: ae(mentor)
MFC after: 2 weeks
dev = make_dev_cred();
dev->si_drv1 = tp;
leaves a small window where the newly created device may be opened
and si_drv1 is NULL.
As this is a vary rare situation, using a lock to close the window
seems overkill. Instead just wait for the assignment of si_drv1.
Suggested by: kib
MFC after: 1 week
bitmaps that may occur.
The way this works is:
* the beginning of the radiotap frame has a 32 bit "radiotap" namespace
bitmap;
* if the vendor bitmap bit is set, then the next bitmap will be interpreted
as a vendor bitmap;
* this can keep going on and on (ie, more vendor and radiotap namespace
bitmaps can be added) until the last bitmap with no "more bitmaps" set.
Now, the radiotap code gets its grubby fingers into the supplied
radiotap rx/tx buffer and replaces the channel configuration
for each frame. I don't know why it's not up to the drivers themselves
to do this, but I digress. So, if a vendor bitmap (or two, etc) exists,
the offset calculations will be all completely wrong.
This particular patch introduces ieee80211_radiotap_attachv(), which
includes the number of vendor bitmaps (well, any other bitmaps, vendor
or otherwise) between the end of the bitmap/header and the start of the
actual radiotap field entries. This makes the radiotap calculations
"right", so it correctly calculates where to overwrite the channel
configuration.
The long term fix is to go through and make each driver update the channel
configuration, as some of the fields are already being updated.
That, however, is a longer term fix that will need each driver fixed.
I leave that as an exercise to someone in the future.
and crosschecks against firmware documentation. We now check and report
FC firmware attributes and at least are now prepared for the upper 48 bits
of f/w attributes (which are probably for the 8100 or later cards). This
involed changing how inbits and outbits are calculated for varios commands,
hopefully clearer and cleaner. This also caused me to clean up the actual
mailbox register usage. Finally, we are now unconditionally using a CRN
for initiator mode.
A longstanding issue with the 2400/2500 is that they do *not* support
a "Prefer PTP followed by loop", which explains why enabling that
caused the f/w to crash.
A slightly more invasive change is to let the firmware load entirely
drive whether multi_id support is enabled or not.
Sponsored by: Spectralogic
MFC after: 1 week
D2500CC which I have, syscons in text-mode fails to show the expected
contents due to write errors into video-memory.
At least one of the causes is that we copy from syscons internal buffer
to the video memory with optimized bcopy(9) which uses >16bit operations.
Until now, 32bit and wider operations have always worked on the video
memory, but since I cannot find a single source which says that this
SHALL work, and since these chipsets/bugs are now out there, this
commit changes syscons to always use 16bit copies on i386 & amd64.
This may be relevevant for PR's:
166262
166639
and various other bug reports floating elsewhere on the net, but
I lack hardware to test those.
Due to some differences in MSRs between Xeon Sandy Bridge and Core Sandy
Bridge (Model 0x2A), wrmsr() may generate in a GP# fault exception and so a
panic of the machine.
Approved by: gnn (mentor)
MFC after: 3 days
zero but in any case is overwritten by successive copyin(), making the
previous initialization useless. Remove this.
As an added bonus this fixes a style(9) bug.
Discussed with: kib
Approved by: gnn (mentor)
MFC after: 3 days
* Add an OS_A_REG_WRITE() routine - analog writes require a 100usec delay
on AR9280 and later, so create a method to do it.
* Use it for the AR9287 analog writes.
* Re-indent and style(9) the code.
This just requires a little HAL change (add a new config parameter) and
some glue in if_ath_pci.c, however I'm leaving this up for someone else
to do.
Obtained from: Qualcomm Atheros
interacts with some non-highpoint controollers. Change attach_generic to
be off by default.
PR: kern/168910
Submitted by: Richard Yao <ryao@gentoo.org>
Approved by: cperciva
No objections by: -hackers
Obtained from: Gentoo FreeBSD
MFC after: 2 weeks
* Use ATH_RC_NUM instead of '4' when iterating over the ratecontrol series
array.
* A few style(9) fixes, hopefully no regressions here.
* Add some comments that better describe what's going on.
