Commit Graph

32 Commits

Author SHA1 Message Date
adrian
d61189f2e5 Fix the handling of EOP in status descriptors for if_igb(4) and don't
double-free mbufs.

Like ixgbe(4) chipsets, EOP is only set on the final descriptor
in a chain of descriptors.  So, to free the whole list of descriptors,
we should free the current slot _and_ the assembled list of descriptors
that make up the fragment list.

The existing code was setting discard once it saw EOP + an error status;
it then freed all the subsequent descriptors until the next EOP. That's
totally the wrong order.
2014-09-18 16:20:17 +00:00
jfv
7f364f2263 Update the Intel igb driver to version 2.4.0
- This version has support for the new Intel Avoton systems,
including 2.5Gb support, further it now has IPv6/TSO6 support as
well. Shared code has been updated where necessary as well. Thanks
to my new assistant Eric Joyner for doing the transmit path changes
to bring in the IPv6/TSO6 support. Thanks to Gleb for catching the
one bug and change needed in NETMAP.

Approved by: re
2013-10-09 17:32:52 +00:00
jfv
d3b1490c73 Change the define in the header to eliminate unnecessary data
when using LEGACY TX.
2013-03-29 18:46:13 +00:00
jhb
085c4798a8 Merge similar fixes from 223198 from igb to ixgbe:
- Use a dedicated task to handle deferred transmits from the if_transmit
  method instead of reusing the existing per-queue interrupt task.
  Reusing the per-queue interrupt task could result in both an interrupt
  thread and the taskqueue thread trying to handle received packets on a
  single queue resulting in out-of-order packet processing and lock
  contention.
- Don't define ixgbe_start() at all where if_transmit is used.

Tested by:	Vijay Singh
Reviewed by:	jfv
MFC after:	2 weeks
2012-09-26 18:11:43 +00:00
emaste
51624e0f68 Fix cut-and-paste comment error
Submitted by:	sbruno
2012-04-25 02:05:14 +00:00
jhb
323a33eb5f Reapply r223198 which was reverted in the previous vendor import. Some
portions were already reapplied in r233708:
- Use a dedicated task to handle deferred transmits from the if_transmit
  method instead of reusing the existing per-queue interrupt task.
  Reusing the per-queue interrupt task could result in both an interrupt
  thread and the taskqueue thread trying to handle received packets on a
  single queue resulting in out-of-order packet processing.
- Call ether_ifdetach() earlier in igb_detach().
- Drain tasks and free taskqueues during igb_detach().

MFC after:	1 week
2012-04-11 21:33:45 +00:00
jhb
718d14094c Restore the sysctl changes from 223676 and 227309 lost in the previous
import:
- Add read-only sysctls for all of the tunables supported by the igb and
  em drivers.
- Make the per-instance 'enable_aim' sysctl truly per-instance by having it
  change a per-instance variable (which is used to control AIM) rather
  than having all of the per-instance sysctls operate on a single global
  variable.

While here, restore the previously existing hw.igb.rx_processing_limit
tunable as it is very useful to be able to set a default tunable that
applies to all adapters in the system.
2011-12-21 20:10:11 +00:00
jfv
38b99982d5 Part 2 of 2 New deltas for the 1G drivers.
There have still been intermittent problems with apparent TX
hangs for some customers. These have been problematic to reproduce
but I believe these changes will address them. Testing on a number
of fronts have been positive.

EM: there is an important 'chicken bit' fix for 82574 in the shared
code this is supported in the core here.
    - The TX path has been tightened up to improve performance. In
      particular UDP with jumbo frames was having problems, and the
      changes here have improved that.
    - OACTIVE has been used more carefully on the theory that some
      hangs may be due to a problem in this interaction
    - Problems with the RX init code, the "lazy" allocation and
      ring initialization has been found to cause problems in some
      newer client systems, and as it really is not that big a win
      (its not in a hot path) it seems best to remove it.
    - HWTSO was broken when VLAN HWTAGGING or HWFILTER is used, I
      found this was due to an error in setting up the descriptors
      in em_xmit.

IGB:
    - TX is also improved here. With multiqueue I realized its very
      important to handle OACTIVE only under the CORE lock so there
      are no races between the queues.
    - Flow Control handling was broken in a couple ways, I have changed
      and I hope improved that in this delta.
    - UDP also had a problem in the TX path here, it was change to
      improve that.
    - On some hardware, with the driver static, a weird stray interrupt
      seems to sometimes fire and cause a panic in the RX mbuf refresh
      code. This is addressed by setting interrupts late in the init
      path, and also to set all interrupts bits off at the start of that.
2011-12-10 07:08:52 +00:00
jhb
7b0555e88a - Add read-only sysctls for all of the tunables supported by the igb and
em drivers.
- Make the per-instance 'enable_aim' sysctl truly per-instance by having it
  change a per-instance variable (which is used to control AIM) rather
  than having all of the per-instance sysctls operate on a single global
  variable.

Reviewed by:	jfv (earlier version)
MFC after:	1 week
2011-06-29 16:20:52 +00:00
jfv
19ae02bba5 Eliminate some global tuneables in favor of adapter-specific,
particular flow control and dma coalesce. Also improve the
sysctl operation on those too.

Add IPv6 detection in the ioctl code, this was done for
ixgbe first, carrying that over.

Add resource ability to disable particular adapter.

Add HW TSO capability so vlans can make use of TSO
2011-06-20 22:59:29 +00:00
jhb
72db81bfbd - Use a dedicated task to handle deferred transmits from the if_transmit
method instead of reusing the existing per-queue interrupt task.
  Reusing the per-queue interrupt task could result in both an interrupt
  thread and the taskqueue thread trying to handle received packets on a
  single queue resulting in out-of-order packet processing.
- Don't define igb_start() at all on 8.0 and where if_transmit is used.
  Replace last remaining call to igb_start() with a loop to kick off
  transmit on each queue instead.
- Call ether_ifdetach() earlier in igb_detach().
- Drain tasks and free taskqueues during igb_detach().

Reviewed by:	jfv
MFC after:	1 week
2011-06-17 20:06:52 +00:00
jfv
500a42a4fa Small change to make backporting to stable/7,
thanks to Arnaud Lacombe for suggesting it.
2011-04-28 22:21:53 +00:00
jfv
bb9f2459b8 Important update for the igb driver:
- Add the change made in em to the actual unrefreshed number
    of descriptors is used as a basis in rxeof on the way out
    to determine if more refresh is needed. NOTE: there is a
    difference in the ring setup in igb, this is not accidental,
    it is necessitated by hardware behavior, when you reset the
    newer adapters it will not let you write RDH, it ALWAYS sets
    it to 0. Thus the way em does it is not possible.
  - Change the sysctl handling of flow control, it will now make
    the change dynamically when the variable setting changes rather
    than requiring a reset.
  - Change the eee sysctl naming, validation found the old unintuitive :)
  - Last but not least, some important performance tweaks in the TX
    path, I found that UDP behavior could be drastically hindered or
    improved with just small changes in the start loop. What I have
    here is what testing has shown to be the best overall. Its interesting
    to note that changing the clean threshold to start at a full half of
    the ring, made a BIG difference in performance.  I hope that this
    will prove to be advantageous for most workloads.

MFC in a week.
2011-04-05 21:55:43 +00:00
jfv
51a535dc50 This delta updates the em driver to version 7.2.2 which has
been undergoing test for some weeks. This improves the RX
mbuf handling to avoid system hang due to depletion. Thanks
to all those who have been testing the code, and to Beezar
Liu for the design changes.

Next the igb driver is updated for similar RX changes, but
also to add new features support for our upcoming i350 family
of adapters.

MFC after a week
2011-03-18 18:54:00 +00:00
jfv
869db2f9c7 Add support for the new I350 family of 1G interfaces.
- this also includes virtualization support on these devices

Correct some vlan issues we were seeing in test, jumbo frames on vlans
did not work correctly, this was all due to confused logic around HW
filters, the new code should now work for all uses.

Important fix: when mbuf resources are depeleted, it was possible to
completely empty the RX ring, and then the RX engine would stall
forever. This is fixed by a flag being set whenever the refresh code
fails due to an mbuf shortage, also the local timer now makes sure
that all queues get an interrupt when it runs, the interrupt code
will then always call rxeof, and in that routine the first thing done
is now to check the refresh flag and call refresh_mbufs. This has been
verified to fix this type 'hang'. Similar code will follow in the other
drivers.

Finally, sync up shared code for the I350 support.

Thanks to everyone that has been reporting issues, and helping in the
debug/test process!!
2011-02-11 01:00:26 +00:00
jfv
1478634b45 - New 82580 devices supported
- Fixes from John Baldwin: vlan shadow tables made per/interface,
  make vlan hw setup only happen when capability enabled, and
  finally, make a tuneable interrupt rate. Thanks John!
- Tweaked watchdog handling to avoid any false positives, now
  detection is in the TX clean path, with only the final check
  and init happening in the local timer.
- limit queues to 8 for all devices, with 82576 or 82580 on
  larger machines it can get greater than this, and it seems
  mostly a resource waste to do so. Even 8 might be high but
  it can be manually reduced.
- use 2k, 4k and now 9k clusters based on the MTU size.
- rework the igb_refresh_mbuf() code, its important to
  make sure the descriptor is rewritten even when reusing
  mbufs since writeback clobbers things.

MFC: in a few days, this delta needs to get to 8.2
2010-11-23 22:12:02 +00:00
jfv
6e3a6af4dc Update code from Intel:
- Sync shared code with Intel internal
	- New client chipset support added
	- em driver - fixes to 82574, limit queues to 1 but use MSIX
	- em driver - large changes in TX checksum offload and tso
	  code, thanks to yongari.
	- some small changes for watchdog issues.
	- igb driver - local timer watchdog code was missing locking
	  this and a couple other watchdog related fixes.
	- bug in rx discard found by Andrew Boyer, check for null pointer

MFC: a week
2010-09-28 00:13:15 +00:00
yongari
8203781f0e Do not allocate multicast array memory in multicast filter
configuration function. For failed memory allocations, em(4)/lem(4)
called panic(9) which is not acceptable on production box.
igb(4)/ixgb(4)/ix(4) allocated the required memory in stack which
consumed 768 bytes of stack memory which looks too big.

To address these issues, allocate multicast array memory in device
attach time and make multicast configuration success under any
conditions. This change also removes the excessive use of memory in
stack.

Reviewed by:	jfv
2010-08-28 00:34:22 +00:00
jfv
1b5972d2ab OK, I was a bit sleep this morning and checked in
the core changes but left out the shared code, lol.
Well, and a couple fixes to the core... hopefully
this will all be complete now.

Happy happy joy joy :)
2010-06-30 21:05:51 +00:00
jfv
f0bd1ca4c6 SR-IOV support added to igb
What this provides is support for the 'virtual function'
interface that a FreeBSD VM may be assigned from a host
like KVM on Linux, or newer versions of Xen with such
support.

When the guest is set up with the capability, a special
limited function 82576 PCI device is present in its virtual
PCI space, so with this driver installed in the guest that
device will be detected and function nearly like the bare
metal, as it were.

The interface is only allowed a single queue in this configuration
however initial performance tests have looked very good.

Enjoy!!
2010-06-30 17:26:47 +00:00
gnn
8b63d86a34 Move statistics into the sysctl tree making it easier to find
and use them.
Add previously hidden statistics, some of which include interrupt
and host/card communication counters.
2010-06-16 17:36:53 +00:00
jfv
73fa18d121 Changes from John Baldwin adding to last commit,
change rxeof api for poll friendliness, and
eliminate unnecessary link tasklet use. Thanks John!
2010-06-16 16:37:36 +00:00
jfv
257c4e7afb Change to have legacy interrupts use the same
handler had a flaw, thanks to John Baldwin for
finding it. Change which queue legacy tasks are
enqueued on.

MFC: soonest
2010-06-15 21:11:51 +00:00
marius
41905cc364 Hook the identification LEDs of igb(4), lem(4) and em(4) devices up with
led(4) so they can be lit or f.e. made blink via `echo f2 > /dev/led/em0`
for localization purposes.

Approved by:	jfv
MFC afer:	1 week (after r205869)
2010-03-31 20:43:24 +00:00
jfv
e7270b68f3 Update to igb and em:
em revision 7.0.0:
	- Using driver devclass, seperate legacy (pre-pcie) code
	  into a seperate source file. This will at least help
	  protect against regression issues. It compiles along
	  with em, and is transparent to end use, devices in each
	  appear to be 'emX'. When using em in a modular form this
	  also allows the legacy stuff to be defined out.
	- Add tx and rx rings as in igb, in the 82574 this becomes
	  actual multiqueue for the first time (2 queues) while in
	  other PCIE adapters its just make code cleaner.
	- Add RX mbuf handling logic that matches igb, this will
	  eliminate packet drops due to temporary mbuf shortage.

igb revision 1.9.3:
	- Following the ixgbe code, use a new approach in what
	  was called 'get_buf', the routine now has been made
	  independent of rxeof, it now does the update to the
	  engine TDT register, this design allows temporary
	  mbuf resources to become non-critical, not requiring
	  a packet to be discarded, instead it just returns and
	  does not increment the tail pointer.
	- With the above change it was also unnecessary to keep
	  'spare' maps around, since we do not have the discard
	  issue.
	- Performance tweaks and improvements to the code also.

MFC in a week
2010-03-29 23:36:34 +00:00
jfv
f3b3ede9be Add a link tasklet so updates can be sleepable. 2010-01-27 20:12:04 +00:00
jfv
54091abe67 Update the 1G drivers, shared code sync with Intel,
igb now has a queue notion that has a single interrupt
with an RX/TX pair, this will reduce the total interrupts
seen on a system. Both em and igb have a new watchdog
method. igb has fixes from Pyun Yong-Hyeon that have
improved stability, thank you :)

I wish to MFC this for 7.3 asap, please test if able.
2010-01-26 22:32:22 +00:00
jfv
fe4debf525 Resync with Intel versions of both the em and igb
drivers. These add new hardware support, most importantly
the pch (i5 chipset) in the em driver. Also, both drivers
now have the simplified (and I hope improved) watchdog
code. The igb driver uses the new RX cleanup that I
first implemented in ixgbe.

em  - version 6.9.24
igb - version 1.8.4
2009-12-08 01:07:44 +00:00
jfv
bd3587c757 Updates for both the em and igb drivers, add support
for multiqueue tx, shared code updates, new device
support, and some bug fixes.
2009-06-24 17:41:29 +00:00
jfv
fa07963f1d This delta syncs the em and igb drivers with Intel,
adds header split and SCTP support into the igb driver.
Various small improvements and fixes.

MFC after: 2 weeks
2009-04-10 00:05:46 +00:00
jfv
a98280bcbe Update to igb driver:
- changes in support of the VLAN filter fix to 126850
	- removal of a bunch of legacy code that was cruft, if not
	  possibly harmful.
	- removal of POLLING from this driver, with multiqueue and
	   MSIX it just makes no sense here.
	- Fix an LRO bug that I've been working on internally, intermittent
	  panics under stress, the problem was releasing the RX ring lock
	  before the LRO flushing.
	- Following the above fix I now enable LRO by default
	- For performance reasons increase the default number of RX queues
	  to 4.
	- Add AIM - "Adaptive Interrupt Moderation", a fancy way of saying
	  that the EITR value is dynamically changed based on the size of
	  packets in the last interrupt interval.

	- Much goodness to try, enjoy!!
2008-08-28 22:28:28 +00:00
jfv
cdddb20941 Merge of the source for igb and em into dev/e1000, this
proved to be necessary to make the static drivers work
in EITHER/OR or BOTH configurations. Modules will still
build in sys/modules/igb or em as before.

This also updates the igb driver for support for the 82576
adapter, adds shared code fixes, and etc....

MFC after:	ASAP
2008-07-30 21:56:53 +00:00