Some rc scripts in ports (e.g. uwsgi, apache, openvpn) allow for
'application profiles' that usually require the rc script to be invoked
again for each active profile. Because there's no consistent way to
determine the path because it differs between manual/service(8) invocations
and /etc/rc invocations, this leads to patterns like these:
- www/uwsgi hardcodes the script path
- security/openvpn guesses either $_file or $0 based on $0 = /etc/rc
Instead of forcing rc scripts to guess, provide an rc_service variable to
the scripts that gets set appropriately both for direct execution or when a
script is being executed via run_rc_script (e.g. /etc/rc).
This is our analog of an OpenRC variable with the same name, different case
(RC_SERVICE).
PR: 234614
Reported by: koobs
Reviewed by: dteske, jilles
MFC after: 3 days
With new sysctls (to the best of our ability do detect them). Restructured
smp.4 slightly for clarity (keep relevant stuff closer to the top) while
documenting.
Reviewed by: markj, jhibbits (ppc parts)
MFC after: 3 days
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D18322
- Add 'device rtwn' to rtwn_pci(4) and rtwn_usb(4) config sample;
kernel will not compile otherwise.
- Refresh devices list in rtwn_usb(4); add 'chipset' column.
- Bump Dd after this commit and r342682.
MFC after: 4 days
prompt, so it looks just like the tcsh(1) one when you uncomment it.
Reviewed by: jilles
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D18673
- Change short weekday names to use only one Chinese character.
(note: this is a somewhat misunfortunate compromise due to the fact
that some applications are using short buffer for weekday names,
and in ~1905 when 星期 system was created to replace the traditional
七曜 system, which can use 日月火水木金土 to represent Sunday through
Saturday with just one character without any confusion).
- for zh_CN locales: use Arabic numerals for month names, matching the
practice of all other CJK locales
- Regenerate zh_CN.{GB2312,GBK} locales from zh_CN.UTF-8.
Reported by: ygy
Reviewed by: kevlo
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18689
General update of the driver description and mention some important credits.
Add a symlink for ext4fs as it is of special interest nowadays.
Fic some `mandoc -Tlint` issues while here.
MFC after: 15 days
Differential Revision: https://reviews.freebsd.org/D18445
Add an example of how to format examples in EXAMPLES sections. The
suggested format is heavily based on zfs.8.
While here, capitalize subsection titles.
Reviewed by: bcr
Approved by: bcr (doc),
Approved by: krion (mentor, implicit), mat (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D18681
Legacy rc.d scripts (.sh extension) have not been supported since
r193118. Remove the outdated references to the legacy format, as they
are no longer valid.
Bug: 193936
MFC after: 1 week
Reviewed by: cress, emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D18666
The aim of this manual page is to act as a style and formatting guide for
mdoc(7) manual pages. Currently, mdoc(7) does not provide much guidance
when it comes to the usage of macros making it difficult to format manual
pages in a consistent way.
Reviewed by: bcr
Approved by: bcr (doc), krion (mentor, implicit), mat (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D18394
The FreeBSD Foundation and NLnet Foundation sponsored the original work,
and the Foundation sponsored followon work and integration efforts by
bz@.
Sponsored by: The FreeBSD Foundation
Currently, the installer uses pre-created 800KB FAT12 filesystems that
it dd's onto the ESP partition.
This changeset improves that by having the installer generate a FAT32
filesystem directly onto the ESP using newfs_msdos and then copying
loader.efi into /EFI/freebsd.
For live installs it then runs efibootmgr to add a FreeBSD boot entry
in the BIOS.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D17947
iBCS2 was disconnected from the build in 2015 (see r291419)
bsdconfig parts submitted by dteske.
Reviewed by: kib (previous version)
Sponsored by: The FreeBSD Foundation
or the likes. Add new control message types: setdlt and getdlt to switch
from default DLT_RAW (no encapsulation) to DLT_EN10MB (ethernet).
Approved by: glebius
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D18535
The removal (and creation of a port) has been pre-announced in UPDATING
1 month ago. Packages are available for all supported FreeBSD vesions.
I did not think that another entry in UPDATING is required to note the
actual removal.
No MFC is planned - CTM shall be kept in base for all releases up to 12.x.
Reviewed by: rgrimes
Approved by: imp, bcr (manpages)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D17935
PR: maybe related to 233998 (inconclusive at this time)
Submitted by: byuu <byuu AT tutanota.com> (previous version)
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D18506
The pwm subsystem consist of API for PWM controllers, pwmbus to register them
and a pwm(8) utility to talk to them from userland.
Reviewed by: oshgobo (capsicum), bcr (manpage), 0mp (manpage)
Differential Revision: https://reviews.freebsd.org/D17938
Add a man page for ptnet(4), describing the guest driver for netmap passthrough.
Reviewed by: bcr
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18518
to shrink libllvm.a.
This is a workaround for "relocation truncated to fit" errors with BFD
ld 2.17.50 on arm and armv6, when linking executables against it.
The required range extensions are not yet supported by this very old
version of BFD ld. When arm and armv6 userland can be successfully
linked by lld, this workaround can be removed.
o Dynamically load all the .so files found in /libexec/nvmecontrol and
/usr/local/libexec/nvmecontrol.
o Link nvmecontrol -rdynamic so that its symbols are visible to the
libraries we load.
o Create concatinated linker sets that we dynamically expand.
o Add the linked-in top and logpage linker sets to the mirrors for them
and add those sets to the mirrors when we load a new .so.
o Add some macros to help hide the names of the linker sets.
o Update the man page.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D18455
fold
pfsync code is called for every new state, state update and state
deletion in pf. While pf itself can operate on multiple states at the
same time (on different cores, assuming the states hash to a different
hashrow), pfsync only had a single lock.
This greatly reduced throughput on multicore systems.
Address this by splitting the pfsync queues into buckets, based on the
state id. This ensures that updates for a given connection always end up
in the same bucket, which allows pfsync to still collapse multiple
updates into one, while allowing multiple cores to proceed at the same
time.
The number of buckets is tunable, but defaults to 2 x number of cpus.
Benchmarking has shown improvement, depending on hardware and setup, from ~30%
to ~100%.
MFC after: 1 week
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D18373
- add "ecma+italics" cap
- use it in "xterm-basic"
- add "tmux"/"tmux-256color" caps, fixing "so" and "se" caps,
and sourcing "ecma+italics" and "screen"/"screen-256color"
Reviewed by: bapt
Differential revision: https://reviews.freebsd.org/D18363
