Trying to determine current lowest C-state after an AC event is racy
with C-states actually being changed by ACPI platform and kernel driver.
MFC after: 3 weeks
systems are fully "ready to go".
'FILESYSTEMS' states: "This is a dummy dependency, for services which
require file systems to be mounted before starting." However, we have
'var' which is was run after 'FILESYSTEMS' and can mount /var if it
already isn't mounted. Furthermore, several scripts cannot use /var
until 'cleanvar' has done its thing. Thus "FILESYSTEMS" hasn't really
meant all critical file systems are fully usable.
gives machine unique values from the firmware.
* The kernel is more likely to be unique than /bin/ls (but no need to
stuff many megabytes into /dev/random, so hash it).
* Change ordering to give larger variance across reboots to reduce
predictability.
r128060 for "hardware-supplied entropy" reversed this without reason,
seems a typo.
* Isolate "better than nothing" implementation to a function.
Submitted by: obrien & Arthur Mesh <arthurmesh@gmail.com>
Sponsored by: Juniper Networks
- Add -P option to support PID file. When -a is specified /var/run/rarpd.pid
is used, and when an interface is specified /var/run/rarpd.<ifname>.pid is
used by default.
Adjust power_profile script to handle the new world order as well.
Some vendors are opting out of a C2 state and only defining C1 & C3. This
leads the acpi_cpu display to indicate that the machine supports C1 & C2
which is caused by the (mis)use of the index of the cx_state array as the
ACPI_STATE_CX value.
e.g. the code was pretending that cx_state[i] would
always convert to i by subtracting 1.
cx_state[2] == ACPI_STATE_C3
cx_state[1] == ACPI_STATE_C2
cx_state[0] == ACPI_STATE_C1
however, on certain machines this would lead to
cx_state[1] == ACPI_STATE_C3
cx_state[0] == ACPI_STATE_C1
This didn't break anything but led to a display of:
* dev.cpu.0.cx_supported: C1/1 C2/96
Instead of
* dev.cpu.0.cx_supported: C1/1 C3/96
MFC after: 2 weeks
thing it was still used for was to set the "global default" password
hash. Since the stock auth.conf contained nothing but comments, the
global default was actually the first algorithm in crypt(3)'s list,
which happens to be DES; I take the fact that nobody noticed as proof
that it was not used outside of crypt(3).
The only other use in our tree was in the Kerberos support code in
in tinyware's passwd(1). I removed that code in an earlier commit;
it would not have compiled anyway, as it only supported Kerberos IV.
The auth_getval() function is now a stub that always returns NULL,
which has the same effect as a functional auth_getval() with an
empty auth.conf.
MFC after: 3 weeks
to the build system. FreeBSD written scripts are stored in
src/share and the toolkit scripts are brought from the cddl directory
into a working tree via install.
MFC after: 2 weeks
The NAND Flash environment consists of several distinct components:
- NAND framework (drivers harness for NAND controllers and NAND chips)
- NAND simulator (NANDsim)
- NAND file system (NAND FS)
- Companion tools and utilities
- Documentation (manual pages)
This work is still experimental. Please use with caution.
Obtained from: Semihalf
Supported by: FreeBSD Foundation, Juniper Networks
o change rcname to kfd;
o move mandatory options to command_args;
o add missing "shutdown" keyword;
o fix require line. Kfd doesn't really need to be started before
daemons.
Suggested by: dougb
if the accounting log file is atomically replaced with a new file
(such as during log rotation).
- Simplify accounting log rotation a bit. There is no need to re-run
accton(8) after renaming the new log file to it's real name.
PR: kern/167321
Tested by: Jeremy Chadwick
- make the default prompt a bit more like scp
- make the user show as root even when using 'su' instead of 'su -'
- the key bindings didn't hurt anything but likely hide a bug
- merge history instead of overwriting it
Submitted by: gavin, joel
Approved by: cperciva
- Add an examples file with many of the not accepted suggestions from the discussion
PR: conf/160689
Reviewed by: many
Discussed on: current
Approved by: cperciva
several new kerberos related libraries and applications to FreeBSD:
o kgetcred(1) allows one to manually get a ticket for a particular service.
o kf(1) securily forwards ticket to another host through an authenticated
and encrypted stream.
o kcc(1) is an umbrella program around klist(1), kswitch(1), kgetcred(1)
and other user kerberos operations. klist and kswitch are just symlinks
to kcc(1) now.
o kswitch(1) allows you to easily switch between kerberos credentials if
you're running KCM.
o hxtool(1) is a certificate management tool to use with PKINIT.
o string2key(1) maps a password into key.
o kdigest(8) is a userland tool to access the KDC's digest interface.
o kimpersonate(8) creates a "fake" ticket for a service.
We also now install manpages for some lirbaries that were not installed
before, libheimntlm and libhx509.
- The new HEIMDAL version no longer supports Kerberos 4. All users are
recommended to switch to Kerberos 5.
- Weak ciphers are now disabled by default. To enable DES support (used
by telnet(8)), use "allow_weak_crypto" option in krb5.conf.
- libtelnet, pam_ksu and pam_krb5 are now compiled with error on warnings
disabled due to the function they use (krb5_get_err_text(3)) being
deprecated. I plan to work on this next.
- Heimdal's KDC now require sqlite to operate. We use the bundled version
and install it as libheimsqlite. If some other FreeBSD components will
require it in the future we can rename it to libbsdsqlite and use for these
components as well.
- This is not a latest Heimdal version, the new one was released while I was
working on the update. I will update it to 1.5.2 soon, as it fixes some
important bugs and security issues.
If the environment doesn't offer a working /dev/console, the existing
version of init(8) will simply refuse running rc(8) scripts. This means
you'll only have a system running init(8) and nothing else.
Change the code to do the following:
- Open /dev/console like we used to do, but make it more robust to use
O_NONBLOCK to prevent blocking on a carrier.
- If this fails, use /dev/null as stdin and /var/log/init.log as stdout
and stderr.
- If even this fails, use /dev/null as stdin, stdout and stderr.
So why us this useful? Well, if you remove the `getpid() == 1' check in
main(), you can now use init(8) inside jails to properly execute rc(8).
It still requires some polishing, as existing tools assume init(8) has
PID 1.
Also it is now possible to use use init(8) on `headless' devices that
don't even have a serial boot console.
If rc(8) is executed without using a TTY, this error appears at the
beginning:
stty: stdin isn't a terminal
Because this is to be expected and of course not harmful, it is better
to simply hide the error message.
MFC after: 1 week
for the default FIB followed by a statement with a list of FIB numbers for
all the other FIBs we install the routes for.
Request by: kib (to make it less noisy)
Tested by: kib
MFC after: 3 days
Without this change, pressing ^T could result in rc.d script putting
junk strings like:
Script <filename> running
in configuration files when redirecting standard output to these files.
MFC after: 2 weeks
certain systems that take a long time to shut down, without adversely
affecting things that shut down quickly. It's also 30 seconds less than
the default hard limit of 120 seconds in kern.init_shutdown_timeout.
PR: conf/109272
Submitted by: Radim Kolar SF.NET <hsn@sendmail.cz>
Extend the so far IPv4-only support for multiple routing tables (FIBs)
introduced in r178888 to IPv6 providing feature parity.
This includes an extended rtalloc(9) KPI for IPv6, the necessary
adjustments to the network stack, and user land support as in netstat.
Sponsored by: Cisco Systems, Inc.
Reviewed by: melifaro (basically)
MFC after: 10 days
- Address performance regressions encountered by das@ by caching per-thread
data in TLS where available.
- Add a __NO_TLS flag to cdefs.h to indicate where not available.
- Reorganise the xlocale.h definitions into xlocale/*.h so that they can be
included from multiple places.
- Export the POSIX2008 subset of xlocale when POSIX2008 says it should be
exported, independently of whether xlocale.h is included.
- Fix the bug where programs using ctype functions always assumed ASCII unless
recompiled.
- Fix some style(9) violations.
Reviewed by: brooks (mentor)
Approved by: dim (mentor)
1. Add new functionality to the force_depend method to incorporate the
tests for whether the service is enabled and/or already running.
2. Add a new option to bypass checking only that the service is enabled
at boot time, and always check if it is running.
3. Use this new functionality to greatly simplify the rc.d scripts that
use force_depend.
4. Add a force_depend for statd in lockd
5. Remove the check that either nfs_server or nfs_client is _enable'd
from statd and lockd. This was always overkill, and prevented using
the {one|force}start options, as well as stop'ing on the command line.
6. The yp* scripts had some of their arguments in various weird orders.
Bring them into line with the model.
7. If mountd fails to create /var/db/mountdtab, err out.
Ideas, suggestions, and/or review from delphij and jilles.
Pointy hats are completely my responsibility however.
The main benefit is that watchdogd would shutdown after most of other
daemons/servers and thus, for example, would remedy a system hang caused
by unlucky X server shutdown.
Reviewed by: dougb (earlier version)
MFC after: 2 weeks
This has the following advantages:
- During boot, the BOOT_TIME record is now written right after the file
systems become writable, but before users are allowed to log in. This
means that they can't cause `hidden logins' by logging in right before
init(8) kicks in.
- The pututxline(3) function may potentially block on file locking,
though this is very rare to occur. By placing it in an rc script, the
user can still kill it with ^C if needed.
- Most importantly: jails don't use init(8). This means that a force
reboot of a system running jails will leave stale entries in the
accounting database of the jails individually.
of rcorder. Somehow in the intervening period addswap got moved to the
very end, which is almost certainly not what we want.
This change moves it to right after kld so that for users who need it,
they'll get it ASAP.
side effect of something else using them. If they haven't been loaded
already but you want to use them, say for configuring a jail, you're out
of luck.
So add a knob to always load the default rulesets. While I'm here document
the other devfs_ knobs in rc.conf.5.
- ipv6_enable + ipv6_gateway_enable should unset ACCEPT_RTADV by default for
backward compatibility.
- Configurations in ipv6_prefix_IF should be recognized even if there is no
ifconfig_IF_ipv6.
- DAD wait should be performed at once, not on a per-interface basis, if
possible. This fixes an issue that a system with a lot of IPv6-capable
interfaces takes too long for booting.
MFC after: 1 week
creating stray "log" symlinks if the mount fails. That apparently
happens in some ezjail configs.
PR: conf/143084
Submitted by: Dirk Engling <erdgeist at erdgeist.org>
Reviewed by: simon
MFC after: 2 weeks
dhclient is no longer a real service, it is a helper script
for /etc/rc.d/netif and devd. Its direct invocation isn't
needed to bring the network up.
Approved by: jhb
The concept of set_rcvar() was nice in theory, but the forks
it creates are a drag on the startup process, which is especially
noticeable on slower systems, such as embedded ones.
assignments to the literal values it would have returned.
The concept of set_rcvar() was nice in theory, but the forks
it creates are a drag on the startup process, which is especially
noticeable on slower systems, such as embedded ones.
During the discussion on freebsd-rc@ a preference was expressed for
using ${name}_enable instead of the literal values. However the
code portability concept doesn't really apply since there are so
many other places where the literal name has to be searched for
and replaced. Also, using the literal value is also a tiny bit
faster than dereferencing the variables, and every little bit helps.
Document the current semantics of the 'quiet' command prefix
in the rc.subr(8).
Fix dhclient rc.d script: it should not call err() for
non-DHCP-enabled interface when it is called from devd, because the
latter just blindly calls 'service dhclient quietstart' on each "link
up" event.
Since the 'quietstart' will silence the message "Cannot 'start' <foo>.
Set <foo>_enable to YES in /etc/rc.conf or use 'onestart' instead of
'start'." and running dhclient on the non-DHCP-enabled interface is
the same thing as running the service <foo> without <foo>_enable set,
such modification is in sync with the current semantics of the 'quiet'
prefix.
Approved by: glebius
Reviewed by: freebsd-rc list
MFC after: 2 weeks
o Make the pfsync.ko actually usable. Before this change loading it
didn't register protosw, so was a nop. However, a module /boot/kernel
did confused users.
o Rewrite the way we are joining multicast group:
- Move multicast initialization/destruction to separate functions.
- Don't allocate memory if we aren't going to join a multicast group.
- Use modern API for joining/leaving multicast group.
- Now the utterly wrong pfsync_ifdetach() isn't needed.
o Move module initialization from SYSINIT(9) to moduledata_t method.
o Refuse to unload module, unless asked forcibly.
o Improve a bit some FreeBSD porting code:
- Use separate malloc type.
- Simplify swi sheduling.
This change is probably wrong from VIMAGE viewpoint, however pfsync
wasn't VIMAGE-correct before this change, too.
Glanced at by: bz
with FreeBSD easier for vendors.
- For optional files use variables starting with underscore.
Both changes make rc.d/Makefile look similar to sys/modules/Makefile.
Reviewed by: dim
MK_LIBCPLUSPLUS=yes to enable). This is a work-in-progress. It works for
me, but is not guaranteed to work for anyone else and may eat your dog.
To build C++ using libc++, add -stdlib=libc++ to your CXX and LD flags.
Bug reports welcome, bug fixes even more welcome...
Approved by: dim (mentor)
only 1 old file to be saved, so fix this. Problem raised in the PR,
but actually required a different solution.
While I'm here, fix a very old off-by-one error causing 1 more file
than specified in daily_accounting_save to be saved because acct.0
was not taken into account (pun intended). Change that, and use a more
thorough method of finding old files to delete. Partly just because this
is the right thing to do, but also to silently fix the extra log that
would have been left behind forever with the previous method.
PR: conf/160848
Submitted by: Andrey Zonov <andrey@zonov.org>
the /etc/rc.d/nfsd script sets vfs.nfsd.server_max_nfsvers to 3.
Then, when you set nfsv4_server_enable=YES in rc.conf, and restart nfsd
via the rc.d script, without rebooting, the sysctl does *not* get reset
to max version 4, so NFSv4 still doesn't work.
Fix this by explicitly setting vfs.nfsd.server_max_nfsvers to 4 when
NFSv4 is requested.
I also added resetting of the nfs_privport sysctls, since this has the
same issue: nfs_reserved_port_only=YES in rc.conf sets the nfs_privport
sysctl to 1, but in the other case, the sysctl doesn't get reset to 0.
Reviewed by: rmacklem
Silence from: rc@
MFC after: 3 days
Variable 'rc_force' is accessible only at the time of rc_run_command,
so it can't be examined from the script's main code.
Spotted by: hrs
Reviewed by: hrs, des
Approved by: des
MFC after: 2 weeks
the logic (true/false) of the matching.
- Add "!usbus[0-9]+" to IFNET ATTACH notification handler in the default
devd.conf to prevent rc.d/netif from running when usbus[0-9]+ is attached.
Reviewed by: imp
Make sure that static ARP and NDP bindings are set before NETWORKING.
As static_ndp is based on static_arp, pass copyright to the project with
permission of the original author (delphij@).
Reviewed by: delphij@FreeBSD.org
MFC after: 3 days
for interfaces which were not configured for DHCP *unless* rc_force was set;
the correct logic is to run dhclient for those interfaces *only if* rc_force
is set.
Broken by: des@
Noticed by: everybody and his dog
Submitted by: rea@
PR: bin/161733
too-thorough cleanup of unused files, in r213695. Also make sure these
get installed under /usr/share/doc.
Submitted by: rwatson, brooks
Pointy hat to: dim
MFC after: 3 days
(r225485). When setting an interface name to it, the following
configurations will be enabled:
1. "no_radr" is set to all IPv6 interfaces automatically.
2. "-no_radr accept_rtadv" will be set only for $ipv6_cpe_wanif. This is
done just before evaluating $ifconfig_IF_ipv6 in the rc.d scripts (this
means you can manually supersede this configuration if necessary).
3. The node will add RA-sending routers to the default router list
even if net.inet6.ip6.forwarding=1.
This mode is added to conform to RFC 6204 (a router which connects
the end-user network to a service provider network). To enable
packet forwarding, you still need to set ipv6_gateway_enable=YES.
Note that accepting router entries into the default router list when
packet forwarding capability and a routing daemon are enabled can
result in messing up the routing table. To minimize such unexpected
behaviors, "no_radr" is set on all interfaces but $ipv6_cpe_wanif.
Approved by: re (bz)
comment out the NIS _compat options by default, but leave them in
the file for the convenience of users who want to enable it.
Update the comment in the file accordingly.
Reviewed by: ed
Approved by: re (hrs)
We already modify various configuration files in /etc based on build
configuration. This is not done for nsswitch.conf right now when setting
WITHOUT_NIS. This breaks various utilities, including crond, that depend
on working databases.
Approved by: re (kib)
MFC after: 1 month
Print a separate "Additional routing options" line for each address family
which has additional options, so that it does not get mixed up with the
output from adding routes.
This also reverts r224048 which added newlines to two arbitrary routing
options.
Specifics:
* add 4920MHz-4980MHz for 11a and 11n/HT20
* add 5040MHz-5080MHz for 11a and 11n/HT20
* add 5500MHz-5700MHz for 11a and 11n/HT20 (DFS needed)
* add 5500MHz-5680MHz for 11n/HT40 (DFS needed)
TODO:
* add correct HT40 bands for 4920-4980 and 5040-5080
For the curious:
There's been many revisions to the Japan regulatory rules.
Apparently, the requirements require old cards certified on a previous
version of the rules to obey the older rules, not the newer rules.
The regdomain.xml outlines the -current- restrictions.
The card driver (eg the ath_hal regulatory domain code) may include
previous revisions of the Japan rules.
The ath_hal regdomain code populates the initial channel list based on
what the EEPROM indicates is possible. The regdomain.xml database imposes
further restrictions on this.
So regdomain.xml only needs to have the -current- rules. If the card
was certified on an earlier set of JP rules, it may only support a subset
of those channels - these are calculated at device attach and this
restricted list is kicked to net80211. regdomain.xml operates on -this-
list of channels.
And thus, the correct regulatory behaviour for Japan is handled with only
one regdomain.xml Japan database entry.
(phew.)
Obtained from: Linux wireless-regdb
longer used by /etc/rc.d/nfsd and it is no longer necessary
to load the old nfs server by default, when nfs_server_enable="YES".
Tested by: sgk at troutmask.apl.washington.edu
Reviewed by: rc (Andrzej Tobola)
