Now this check is necessary because IPv6 source routing might use
control data bigger than MLEN. (e.g. 16bytes IPv6 addr x 23 hops)
Actually mbuf cluster should be used in uipc_socket.c:sbcreatecontrol()
and uipc_syscalls.c:sockargs() when data size is bigger then MLEN,
and such patches were already in KAME environment and have been
confirmed to work well. I just forgot to merge them into 4.0, sorry.
For safety, I'll postpone such patches until after 4.0 release.
The effect of postponement is followings.
-Ping6 source routing hops are limitted to around 6 or so.
-If some apps do setsockopt IPV6_RTHDR and try to receive
incoming IPv6 source routing info, it can't receive more
than 6 hops source routing info.
(But currently, no apps seems to be doing it.)
Approved by: jkh
VFS_AIO option is specified, all aio-related syscalls return ENOSYS.
The aio code is very fragile right now, and is unsuitable for default
inclusion in a production shell box.
Approved by: jkh
to the current jail/chflags interactions. This fix conditionalizes ``root
behavior'' in the chflags() case on not being in jail, so attempts to
perform a chflags in a jail are limited to what a normal user could do.
For example, this does allow setting of user flags as appropriate, but
prohibits changing of system flags.
Reviewed by: bde
Enable the driver in sys/conf/files.i386.
In isa/isavar.h increase ISA_NPORT from 32 to 50. This is required
because this brain-damaged card maps 49 (!) port ranges. This does
not have a negative impact because this value only specifies the maximum
number of entries in a linked list and not the size of an array which
is allocated in all drivers.
The register/fifo access routines were not newbus-ified because
1) I knew that the old code worked and is simpler and more efficient
2) the if_ed driver does something similar and
3) the newbus macros collapse to inb/outb anyway.
Reviewed and tested by: hm
Approved by: jkh
was using them exits.
Don't allow a user process to cause the kernel to take a TRCTRAP on a
user space address.
Reviewed by: jlemon, sef
Approved by: jkh
it should have been to start with. The implications of that are not
pleasant when combined with >> as it breaks on multiples of NFDBITS.
Right shifting of a signed value fills with a copy of the sign bit,
not a zero.
Reported by: bde
fd's in the range of 32-63, 96-127 etc. The first problem was the
FD_*() macros were shifting a 32 bit integer "1" left by more than
32 bits. The same problem happened in selscan(). ffs() also takes
an int argument and causes failure. For cases where int == long
(ie: the usual case for x86, but not always as gcc can have long
being a 64 bit quantity) ffs() could be used.
Reported by: Marian Stagarescu <marian@bile.skycache.com>
Reviewed by: dfr, gallatin (sys/types.h only)
Approved by: jkh
256 bytes) caused it to break on many devices.
The SCSI spec says that for commands with 8-bit length fields, a value of 0
means 256 bytes. As it turns out, many devices don't deal with that
properly. Some interpret the 0 as 0, and return no data. Others return
more than 256 bytes of data, and cause an overrun.
The fix is to tell the device we've only allocated SHORT_INQUIRY_LENGTH (36
bytes) of inquiry data, instead of sizeof(struct scsi_inquiry_data).
camcontrol.c: Change inq_len in the call to scsi_inquiry() to
SHORT_INQUIRY_LENGTH, and add a long comment
explaining the reason for the change.
scsi_all.h: Add a comment above the definitinon of
SHORT_INQUIRY_LENGTH alerting people that it is
both the initial probe inquiry length, and the
minimum amount of data needed for scsi_print_inquiry()
to function.
scsi_all.c: Add a comment about SHORT_INQUIRY_LENGTH being the
minimum amount of data needed for
scsi_print_inquiry() to function.
Reviewed by: gibbs
Approved by: jkh
Reported by: "John W. DeBoskey" <jwd@unx.sas.com>
a mess in securelevel environments. Results in one warning during
/etc/rc as it attempts to remove file flags, but this is harmless.
Approved by: High Lord Hubbard
from useful drivers such as the 3D DRI drivers I will be porting for
hardware accelerated OpenGL. The hardware will still be reported during
boot using the nomatch system.
Approved by: jkh
was needed to make attach/detach of devices work, which is
needed for the PCCARD support.
(PCCARD support is still not working though, more to come on that)
Support the CMD646 chip which is used on many alphas, sadly only
in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes.
Lots of cosmetic fixes here and there.
Sorry for the size of this megapatchfromhell but it was not
possible otherwise...
newbus patches based on work from: dfr (Doug Rabson)
accept a new command; in high load cases it may be too busy for the old
value.
This loop needs something to tie it to real time, rather than just the CPU's
ability to fetch from the L1 data cache, but this hack works for now.
Approved by: jkh
firmware prompt. Several sleepy folk mistook the '>>>' for the SRM
prompt, which was never the desired idea.
Submitted by: Andrew Gallatin <gallatin@cs.duke.edu>
Approved by: jkh
fixes some namespace pollution in general and breakage of modules that
aren't in the sys tree in particular (<machine/ipl.h> includes further
headers that aren't installed under /usr/include).
Reimplemented SPLASSERT() so that it is more machine independent and
less bloated and doesn't require the <machine/ipl.h> include spam.
In particular, don't assume that `cpl' can be printed using %08x
format. The alpha arch doesn't even have `cpl'. SPLASSERT() was
harmless on alphas because it isn't actually used.
run out of KVM through a mmap()/fork() bomb that allocates hundreds
of thousands of vm_map_entry structures.
Add panic to make null-pointer dereference crash a little more verbose.
Add a new sysctl, vm.max_proc_mmap, which specifies the maximum number
of mmap()'d spaces (discrete vm_map_entry's in the process). The value
defaults to around 9000 for a 128MB machine. The test is scaled for the
number of processes sharing a vmspace (aka linux threads). Setting
the value to 0 disables the feature.
PR: kern/16573
Approved by: jkh
1) Fix a bug in the int15 function 87 emulation where we only copied half
of what the BIOS asked for. This caused the Mylex RAID adapter to go
haywire and start trashing memory when you tried to boot from it.
2) Don't use interrupt 19 to reboot. Instead, set the reboot flag to a warm
boot and jump to the BIOS's reboot handler. int 19 doesn't clear memory
or restore the interrupt vector table, and thus really isn't safe. For
example, when booting off of PXE, the PXE BIOS eats up a chunk of memory
for its internal data and structures. Since we rebooted via int 19,
using the 'reboot' command in the loader resulted in that memory not
being reclaimed by the BIOS. Thus, after a few PXE boots, the system
was out of lower memory.
3) Catch any int 19 calls made by a BTX client or a user pressing
Ctrl-Alt-Delete and shutdown BTX and reboot the machine cleanly. This
fixes Ctrl-Alt-Delete in the loader and in boot2 instead of presenting
the user with a BTX fault.
Approved by: jkh
Found by: 1) by msmith
This unspams the boot messages, concentrating on the drivers that have
actually been probed.
This basically resurrects revision 1.106 from old /sys/i386/isa/isa.c.
Reviewed by: jkh, dfr
code & it survives a buildworld. So remove the dire warnings about
Noritake support being untested.
o Remove a disconserting printf() left over from NetBSD
Approved by: jkh
1) Non-AST4 multiport cards were broken by bypassing the code that changes
`idev' to the multiport master device.
2) AST4 multiport cards apparently were broken by inverting the test for
the master device having an irq.
3) Error handling for nonexistent master devices was broken by removing a
check for a null pointer.
4) `int' error codes returned by bus_get_resource() were assigned directly
to the boolean variable com->no_irq. Probably harmless, since the
boolean is implemented as a u_char.
Submitted by: part 1) by Chris Radek <cradek@in221.inetnebr.com>
part 2) by yokota
Approved by: jkh
curproc. This only makes any difference on SMP, where we used a
(potentially very bogus) switchtime from our own CPU to calculate
resource usage on another CPU.
This should remove some if not all calcru() related warnings on SMP.
Approved by: jkh
#! /bin/sh # -*- perl -*-
This is simply "delete everything after the next '#', not counting the
first char in the line". No effort has been made to allow quoting,
backslash escaping or '#' in interpreter names.
The complies to POSIX 1003.2 in that Posix says the implementation is
free to choose whatever it likes.
PR: bin/16393
Andrew's problems with SCSI on some alphas- do not call isp_update
directly to update parameters- just mark them as being ready to
update for the next command- the system would just hang on a READ
CAPACITY for a drive. Really annoying because it wouldn't even timeout
(and it has a timeout) so either the SET PARAMETERS call was nuking
things or the f/w was really dropping the ball.
approved: jkh
Reviewed by: gallatin@freebsd.org
