flag instead. The flag is only used within the IP and IPv6 layer 3
protocols.
Because some firewall packages treat IPv4 and IPv6 packets the same the
flag should have the same value for both.
Discussed with: trociny, glebius
The sdhci spec says that if the base or timeout clock frequency in the
capabilities register is zero, the driver must obtain the frequency "from
another source." This change defines that other source to be the low-level
hardware driver, which can pre-set the frequencies in slot.max_clk and
slot.timeout_clk before calling sdhci_init_slot().
This helps with a growing number of SoCs that have sdhci base clock
frequencies that either won't fit into the range allowed by the number of
bits available in the capabilities register, or the frequency is runtime-
configurable.
blocks on a pmap lock, pmap_release() might proceed in parallel and
destroy the pmap mutex, since unlocked pv lock allows to remove pv
entry owned by the pmap.
For now, gate the pmap_release() on write-locked pvh_global_lock.
Since pmap_ts_release() does not unlock the global lock,
pmap_release() would not destroy pmap mutex until the
pmap_ts_referenced() finished. We cannot enter pmap_ts_referenced()
and encounter a pv entry for the destroyed pmap if pmap_release()
passed the global lock gate, since pmap_remove_pages() would finish
earlier.
Reported by: jeff, pho
Reviewed by: alc
Tested by: pho
Sponsored by: The FreeBSD Foundation
the response bits the way we do in software. While the hardware is just
doing the sensible thing rather than leaving it to the software, it's in
violation of the spec by doing so. Grrrr.
running under 64bit kernels as the 'rights' argument has to be split
into two registers or the half of the rights will disappear.
Reported by: jilles
Sponsored by: The FreeBSD Foundation
used by the tools in base systems and with sandboxing more and more tools
the usage should only increase.
Submitted by: Mariusz Zaborski <oshogbo@FreeBSD.org>
Sponsored by: Google Summer of Code 2013
MFC after: 1 month
* Add in MEM_LOAD_UOPS_LLC_HIT_RETIRED for both sandy bridge and sandy
bridge Xeon. Right now it only is enabled for Sandy Bridge.
* D2/0F is actually a combination rather than a separate counter, so
just flip that on for the CPU types that support it.
There's an errata for using this on SB Xeon hardware - I've documented
it in kern/181346.
Tested:
* Sandy Bridge
* Sandy Bridge Xeon
Sponsored by: Netflix, Inc.
which allow one to define SDT probes that specify translated types. The idea
is to make it easy to write SDT probe definitions that can work across
multiple operating systems. In particular, this makes it possible to port
illumos SDT probes to FreeBSD without changing their argument types, so long
as the appropriate translators are defined. Then DTrace scripts written for
Solaris/illumos will work on FreeBSD without any changes.
MFC after: 1 week
Bump up the KVA size proportionally from 512GB to 2TB.
The number of page table pages used by the direct map is now calculated at
run time based on 'Maxmem'. This means the small memory systems will not
see any additional tax in terms of page table pages for the direct map.
However all amd64 systems, regardless of the memory size, will use 3 more
pages to accomodate the bump in the KVA size.
More details available here:
http://lists.freebsd.org/pipermail/freebsd-hackers/2013-June/043015.htmlhttp://lists.freebsd.org/pipermail/freebsd-current/2013-July/043143.html
Tested with the following configurations:
- Sandybridge server with 64GB of memory.
- bhyve VM with 64MB of memory.
- bhyve VM with a 8GB of memory with the memory segment above 4GB cuddling
right up against the 4TB maximum memory limit.
Discussed on: hackers@, current@
Submitted by: Chris Torek (torek@torek.net)
The variable _logname_valid is not exported via the version script;
therefore, change C and i386/amd64 assembler code to remove indirection
(which allowed interposition). This makes the code slightly smaller and
faster.
Also, remove #define PIC_GOT from i386/amd64 in !PIC mode. Without PIC,
there is no place containing the address of each variable, so there is no
possible definition for PIC_GOT.
When an existing process is provided, the thread selected to use
to initialize the new thread could have exited and be reaped.
Acquire the proc lock earlier to ensure the thread remains valid.
Reviewed by: jhb, julian (previous version)
MFC after: 3 days
ensure that all such commands have a non-zero retry count except for those
that are expected to fail (for example, because they are used to probe for
feature support).
While it is possible to pass a retry count down to the hardware driver in
the command request structure, no hardware driver currently implements any
retry logic. The hardware doesn't know much about the context of a single
request, so it makes more sense to handle retries at a layer that does.
This adds retry loops to the mmc_wait_for_cmd() and mmc_wait_for_app_cmd()
functions. These functions are the gateway from other code within mmc.c
to the hardware. App commands are a sequence of two commands and a retry
has to rerun both of them in order, so it needs its own retry loop.
Retry looping is specifically NOT implemented in mmc_wait_for_request()
because it is the gateway for children on the bus, and they have to
implement their own retry logic depending on what makes sense for them.
address alignment of mappings.
- MAP_ALIGNED(n) requests a mapping aligned on a boundary of (1 << n).
Requests for n >= number of bits in a pointer or less than the size of
a page fail with EINVAL. This matches the API provided by NetBSD.
- MAP_ALIGNED_SUPER is a special case of MAP_ALIGNED. It can be used
to optimize the chances of using large pages. By default it will align
the mapping on a large page boundary (the system is free to choose any
large page size to align to that seems best for the mapping request).
However, if the object being mapped is already using large pages, then
it will align the virtual mapping to match the existing large pages in
the object instead.
- Internally, VMFS_ALIGNED_SPACE is now renamed to VMFS_SUPER_SPACE, and
VMFS_ALIGNED_SPACE(n) is repurposed for specifying a specific alignment.
MAP_ALIGNED(n) maps to using VMFS_ALIGNED_SPACE(n), while
MAP_ALIGNED_SUPER maps to VMFS_SUPER_SPACE.
- mmap() of a device object now uses VMFS_OPTIMAL_SPACE rather than
explicitly using VMFS_SUPER_SPACE. All device objects are forced to
use a specific color on creation, so VMFS_OPTIMAL_SPACE is effectively
equivalent.
Reviewed by: alc
MFC after: 1 month
