the most-recently archived logfile and use its mtime to determine whether
or not to rotate, as in the non-timestamped case.
Previously we would just try to use the mtime of <logfile>.0, which always
results in a rotation since it generally doesn't exist in the -t case.
PR: bin/166448
Approved by: emaste (co-mentor)
Tested by: Marco Steinbach <coco executive-computing.de>
MFC after: 2 weeks
don't carp about the watchdog command taking too long until after the
watchdog has been patted, and don't carp via warnx(3) unless -S is set
since syslog(3) already logs to standard error otherwise.
Discussed with: alfred
Reviewed by: alfred
Approved by: emaste (co-mentor)
size and usage in hrStorageAllocationUnits. If the file system has
more than 2^31 allocations it can not be shown correctly and the
meters are useless.
In such cases follow net-snmp behaviour and increase
hrStorageAllocationUnits so the values fit under INT_MAX.
PR: bin/177183
Submitted by: Eugene Grosbein egrosbein rdtc.ru
MFC after: 2 weeks
command line option "-m <memsize in MB>" to specify the memory size.
Prior to this change the user needed to explicitly specify the amount of
memory allocated below 4G (-m <lowmem>) and the amount above 4G (-M <highmem>).
The "-M" option is no longer supported by 'bhyveload' and 'bhyve'.
The start of the PCI hole is fixed at 3GB and cannot be directly changed
using command line options. However it is still possible to change this in
special circumstances via the 'vm_set_lowmem_limit()' API provided by
libvmmapi.
Submitted by: Dinakar Medavaram (initial version)
Reviewed by: grehan
Obtained from: NetApp
- Fix a compile warning where the return value of a call
to a write() function was ignored.
- Remove redundant include files from userland USB header files.
- Add some now needed include files to various C-files.
into the MSI-X table before using it to calculate the table index.
In the common case where the MSI-X table is located at the begining of the
BAR these two offsets are identical and thus the code was working by accident.
This change will fix the case where the MSI-X table is located in the middle
or at the end of the BAR that contains it.
Obtained from: NetApp
Only look for boostrap useful options:
- PACKAGESITE
- ABI
- MIRROR_TYPE
- ASSUME_ALWAYS_YES
While here makes PACKAGESITE expand the ${ABI} variable.
Allow to deactivate any SRV record look up (MIRROR_TYPE=none)
Use the same mechanism as for pkgng itself: first get configuration out of
environment variable and fallback on pkg.conf if exists.
Reviewed by: bdrewery
Adds "pkgExt=" variable to set if pkgs are .tbz or .txz or other.
Auto-detects if packages are PKGNG or old PKG format.
Auto-bootstrap of PKGNG for the new installed environment.
Fixes issues with installing packages from local media, such as DVD/USB.
Switch to using a space-delimiter for installPackages, since a number
of packages use a "," in their version string.
Fix pc-sysinstall to ignore install scripts, and not hang on
user interaction prompts when installing pkgs.
Add pkg2ng command as apart of pkgng bootstrap process.
Obtained from: PC-BSD
This seems prudent to do in its own right but it also opens up the possibility
of not having to mmap the entire guest address space in the 'bhyve' process
context.
Discussed with: grehan
Obtained from: NetApp
The following support was added to watchdog(4):
- Support to query the outstanding timeout.
- Support to set a software pre-timeout function watchdog with an 'action'
- Support to set a software only watchdog with a configurable 'action'
'action' can be a mask specifying a single operation or a combination of:
log(9), printf(9), panic(9) and/or kdb_enter(9).
Support the following in watchdogged:
- Support to utilize the new additions to watchdog(4).
- Support to warn if a watchdog script runs for too long.
- Support for "dry run" where we do not actually arm the watchdog,
but only report on our timing.
Sponsored by: iXsystems, Inc.
MFC after: 1 month
accessing files from various types of media nice and abstracted away from
the wet-work involved in preparing, validating, and initializing those
types of media. This will be used for the package management system module
and other modules that need access to files and want to allow the user to
decide where those files come from (either in a scripted fashion, prompted
fashion, or any combination thereof).
Heavily inspired by sysinstall and even uses the same reserved words so
that scripts are portable. Coded over months, tested continuously through-
out, and reviewed several times.
Some notes about the changes:
- Move network-setting acquisition/validation routines to media/tcpip.subr
- The options screen from sysinstall has been converted to a dialog menu
- The "UFS" media choice is renamed to "Directory" to reflect how sysinstall
treats the choice and a new [true] "UFS" media choice has been added that
acts on real UFS partitions (such as external disks with disklabels).
- Many more help files have been resurrected from sysinstall (I noticed that
some of the content seems a bit dated; I gave them a once-over but they
could really use an update).
- A total of 10 media choices are presented (via mediaGetType) including:
CD/DVD, FTP, FTP Passive, HTTP Proxy, Directory, NFS, DOS, UFS, Floppy, USB
- Novel struct/device management layer for managing the issue of passing
more information than can comfortably fit in an argument list.
These set of ranges will be looked at if a standard memory
range isn't found, and won't be installed in the cache.
Use this to implement the memory behaviour of the PCI hole on
x86 systems, where writes are ignored and reads always return -1.
This allows breakpoints to be set when issuing a 'boot -d', which
has the side effect of accessing the PCI hole when changing the
PTE protection on kernel code, since the pmap layer hasn't been
initialized (a bug, but present in existing FreeBSD releases so
has to be handled).
Reviewed by: neel
Obtained from: NetApp
to meaningful value:
- When nfsdcnt is set, it dictates all values;
- Otherwise, nfsdargs.minthreads is set to user specified value, or the
automatically detected value if there is no one specified;
nfsdargs.maxthreads is set to the user specified value, or the value
of nfsdargs.minthreads if there is no one specified; when it is smaller
than nfsdargs.minthreads, the latter's value is always used.
MFC after: 2 weeks
Prior to this change pinning was implemented via an ioctl (VM_SET_PINNING)
that called 'sched_bind()' on behalf of the user thread.
The ULE implementation of 'sched_bind()' bumps up 'td_pinned' which in turn
runs afoul of the assertion '(td_pinned == 0)' in userret().
Using the cpuset affinity to implement pinning of the vcpu threads works with
both 4BSD and ULE schedulers and has the happy side-effect of getting rid
of a bunch of code in vmm.ko.
Discussed with: grehan
string by undefining __DATE__, since (unlike gcc) clang doesn't allow us
to do that. Instead, define NO_VERSION_DATE, which was helpfully added
to the named source code for exactly this purpose.
GZIP compressed manuals to appear in ./src instead of the appropriate obj dir.
PR: conf/175844
Submitted by: Dominique Goncalves <dominique.goncalves@gmail.com>
The crunchide utility presumes the last 3 chunks of an ELF object
layout are section headers, symbol table, and then string table.
However, this is not specified in the ELF standards, and linkers
may generate different layouts when doing partial linking (-r).
This change is required to build FreeBSD with mclinker or the
gold linker.
PR: bin/174011
Submitted by: Pete Chou
Reviewed by: Cristoph Mallon
MFC after: 2 weeks
the default.
The current behavior of advertising a single MSI vector can be requested by
setting the environment variable "BHYVE_USE_MSI" to "yes". The use of MSI
is not compliant with the virtio specification and will be eventually phased
out.
Submitted by: Gopakumar T
Obtained from: NetApp
can only be located at the beginning or the end of the BAR.
If the MSI-table is located in the middle of a BAR then we will split the
BAR into two and create two mappings - one before the table and one after
the table - leaving a hole in place of the table so accesses to it can be
trapped and emulated.
Obtained from: NetApp
devices are MSI-X capable. This in turn would lead it to treat bar 0 as
the MSI-X table bar even if the underlying device did not support MSI-X.
Fix this by providing an API to query the MSI-X table index of the emulated
device. If the underlying device does not support MSI-X then this API will
return -1.
Obtained from: NetApp
Since ARP and routing are separated, "proxy only" entries
don't have any meaning, thus we don't need additional field
in sockaddr to pass SIN_PROXY flag.
New kernel is binary compatible with old tools, since sizes
of sockaddr_inarp and sockaddr_in match, and sa_family are
filled with same value.
The structure declaration is left for compatibility with
third party software, but in tree code no longer use it.
Reviewed by: ru, andre, net@
the default.
The current behavior of advertising a single MSI vector can be requested by
setting the environment variable "BHYVE_USE_MSI" to "true". The use of MSI
is not compliant with the virtio specification and will be eventually phased
out.
Submitted by: Gopakumar T
Obtained from: NetApp
media has one already, copy it in lieu of leaving things blank. This
reduces the foot-shooting potential for PXE installs that immediately
add packages.
the corresponding struct sigwork_entry were left uninitialized,
potentially causing an early return from do_sigwork(). Ensure that these
fields are initialized, and handle the 'R' flag properly in
do_sigwork().
PR: bin/175330
Reviewed by: gad
Approved by: rstone (co-mentor)
MFC after: 1 week
This uses the recently-added jemalloc(3) feature of setting the lg_chunk
tuning option to zero to request that memory be allocated in the smallest
chunks possible. Without this option, the default is to initally map 8MB,
and then the mlockall() call wires that entire allocation even though the
program only uses a few Kbytes of it at runtime.
PR: bin/173332
Approved by: cognet (mentor)
type. GEOM provider names can't duplicate (or shouldn't -- devfs will either
break or only use the first one if they do) so using the first provider
by that name is a sufficient check. This also lets the scripted partitioner
install onto gmirror and geli and such things.
statically. In most cases the number of table entries will be far less than
the maximum of 2048 allowed by the PCI specification.
Reuse macros from pcireg.h to interpret the MSI-X capability instead of rolling
our own.
Obtained from: NetApp
Scripts take the form:
------------------------------------
PARTITIONS=ada0
DISTRIBUTIONS="kernel.txz base.txz ports.txz"
#!/bin/sh
echo "sshd_enable=YES" >> /etc/rc.conf
pkg add puppet
echo "System setup complete"
------------------------------------
The second part of the script (beginning with #!) is run in the newly
installed system after the installation onto ada0 (with default partitioning,
see scriptedpart for more complicated scenarios) is complete.
will come soon. This lets the install process have a line like:
bsdinstall scriptedpart 'ada0 GPT {1.5G freebsd-ufs /, 10G freebsd-swap,
auto freebsd-ufs /usr}'
to set up a system with a 1.5GB /, some swap space, and a /usr using the
rest of ada0.
MFC after: 1 month
'bhyve' was developed by grehan@ and myself at NetApp (thanks!).
Special thanks to Peter Snyder, Joe Caradonna and Michael Dexter for their
support and encouragement.
Obtained from: NetApp
It stops treating the address on the interface as special by source
address selection rule even when the interface is outgoing interface.
This is desired in some situation.
Requested by: hrs
Reviewed by: IHANet folks including hrs
MFC after: 1 week
fill up to the uart's rx fifo size, and leave any remaining input
for when the rx fifo is read. This allows cut'n'paste of long lines
to be done into the bhyve console without truncation.
Also, introduce a mutex since the file input will run in the mevent
thread context and may corrupt state accessed by a vCPU thread.
Reviewed by: neel
Approved by: NetApp
With this change, dbench with >= 4 processes runs without getting
weird jumps forward in time when the APCI pmtimer is the default
timecounter.
Obtained from: NetApp
the guest to execute real or unpaged protected mode code - bhyve relies on
this feature to execute the AP bootstrap code.
Get rid of the hack that allowed bhyve to support SMP guests on processors
that do not have the "unrestricted guest" capability. This hack was entirely
FreeBSD-specific and would not work with any other guest OS.
Instead, limit the number of vcpus to 1 when executing on processors without
"unrestricted guest" capability.
Suggested by: grehan
Obtained from: NetApp
ensures that the next rotation happens at the correct time when using
interval-based rotations.
PR: bin/174438
Reviewed by: gad
Approved by: rstone (co-mentor)
MFC after: 1 week
credential cache files with names other than /tmp/krb5cc_<uid>.
The gssd daemon does not know how to find these credential caches.
This patch implements a new option "-s" that does a search for
credential cache files, using roughly the same algorithm as the
gssd daemon for Linux uses. The gssd behaviour is only changed
if the new "-s" option is specified. It also implements two other
new options related to the "-s" option.
Reported by: Piete.Brooks at cl.cam.ac.uk, Herbert Poeckl
Tested by: Herbert Poeckl (admin at ist.tugraz.at), Illias A. Marinos
MFC after: 2 weeks
status. '-n' is already used extensively elsewhere in pkgng (to mean
'dry-run') and this reduces the potential confusion
Submitted by: eadler
Approved by: bapt
MFC after: 2 weeks
towards replacing our mtree.
Sponsored by: DARPA, AFRL
Thanks to: cristos@NetBSD for reviewing and committing my patches
wiz@NetBSD for fixing typos in my patches
whether a system has been configured to use pkgng, cause /usr/sbin/pkg
recognise a -n option and exit with a failure code when the pkg port
is not installed.
Approved by: bapt
MFC after: 2 weeks
Since the 'busses[]' and 'apics[]' arrays are indexed by these 8-bit IDs
make sure that they have enough space to accomodate up to 256 entries.
Submitted by: Ravi Shamanna
Obtained from: NetApp
an error instead of calling err() when it is daemonized,
so that the error gets logged.
Discussed with: rwatson, jhb
Tested by: Illias A. Marinos, Herbert Poeckl
MFC after: 2 weeks
of average duration, and total busy time instead of %.
This looks more useful when one runs `iostat -Ix` periodically to
collect statistics: e.g. now it is possible to calculate busy %
between two runs subtracting total busy times and dividing per time
period.
Average duration and % busy are still available via `iostat -x`.
bhyve is intended to be a generic hypervisor, and not FreeBSD-specific.
(renaming internal routines will come later)
Reviewed by: neel
Obtained from: NetApp
being run to set BSDINSTALL_DISTSITE accordingly. This change allows
non-RELEASE branches to use the FTP snapshots directory for bootonly.iso
installations.
Approved by: simon
