Commit Graph

63 Commits

Author SHA1 Message Date
phk
e059b79437 Including <sys/stdint.h> is (almost?) universally only to be able to use
%j in printfs, so put a newsted include in <sys/systm.h> where the printf
prototype lives and save everybody else the trouble.
2003-03-18 08:45:25 +00:00
phk
e01fc931cf Centralize the devstat handling for all GEOM disk device drivers
in geom_disk.c.

As a side effect this makes a lot of #include <sys/devicestat.h>
lines not needed and some biofinish() calls can be reduced to
biodone() again.
2003-03-08 08:01:31 +00:00
des
2756b6c964 More low-hanging fruit: kill caddr_t in calls to wakeup(9) / [mt]sleep(9). 2003-03-02 16:54:40 +00:00
phk
479f597455 NO_GEOM cleanup:
Move ida driver to "struct disk *" centric api.

Retire major number 109.
2003-02-23 18:45:50 +00:00
phk
4ecb873996 Fix the detach code to actually detach the disk instance created
during attach.
2003-02-23 18:31:17 +00:00
phk
5d296f914c Remove a goto the very next statement. 2003-02-23 18:20:03 +00:00
phk
02e550fabb NO_GEOM cleanup:
Retire the "d_dump_t" and use the "dumper_t" type instead.

Dumper_t takes a void * as first arg which is more general than the
dev_t taken by d_dump_t.  (Remember: we could have net-dumpers if
somebody wrote us one!)

Define the convention for GEOM controlled disk devices to be that the
first argument to the dumper function is the struct disk pointer.

Change device drivers accordingly.
2003-02-21 19:00:48 +00:00
ps
f29e29c451 Update to new crashdump API 2003-02-07 06:58:32 +00:00
jhb
ddccbcba68 Use [u]intmax_t and %j instead of long long and %ll to better fix warnings
I fixed earlier.

Requested by:	mux, jake
2002-11-07 22:23:46 +00:00
jhb
50f4905075 Cast a bus_addr_t to a long long to make printf happy. 2002-11-06 22:40:01 +00:00
alfred
ac315391ce use __packed. 2002-09-23 18:54:32 +00:00
phk
57a346a213 (This commit touches about 15 disk device drivers in a very consistent
and predictable way, and I apologize if I have gotten it wrong anywhere,
getting prior review on a patch like this is not feasible, considering
the number of people involved and hardware availability etc.)

If struct disklabel is the messenger: kill the messenger.

Inside struct disk we had a struct disklabel which disk drivers used to
communicate certain metrics to the disklayer above (GEOM or the disk
mini-layer).  This commit changes this communication to use four
explicit fields instead.

Amongst the benefits is that the fields do not get overwritten by
wrong or bogus on-disk disklabels.

Once that is clear, <sys/disk.h> which is included in the drivers
no longer need to pull <sys/disklabel.h> and <sys/diskslice.h> in,
the few places that needs them, have gotten explicit #includes for
them.

The disklabel inside struct disk is now only for internal use in
the disk mini-layer, so instead of embedding it, we malloc it as
we need it.

This concludes (modulus any mistakes) the series of disklabel related
commits.

I belive it all amounts to a NOP for all the rest of you :-)

Sponsored by:   DARPA & NAI Labs.
2002-09-20 19:36:05 +00:00
phk
ef82a51634 Here follows the new kernel dumping infrastructure.
Caveats:

The new savecore program is not complete in the sense that it emulates
enough of the old savecores features to do the job, but implements none
of the options yet.

I would appreciate if a userland hacker could help me out getting savecore
to do what we want it to do from a users point of view, compression,
email-notification, space reservation etc etc.  (send me email if
you are interested).

Currently, savecore will scan all devices marked as "swap" or "dump" in
/etc/fstab _or_ any devices specified on the command-line.

All architectures but i386 lack an implementation of dumpsys(), but
looking at the i386 version it should be trivial for anybody familiar
with the platform(s) to provide this function.

Documentation is quite sparse at this time, more to come.

Details:

ATA and SCSI drivers should work as the dump formatting code has been
removed.  The IDA, TWE and AAC have not yet been converted.

Dumpon now opens the device and uses ioctl(DIOCGKERNELDUMP) to set
the device as dumpdev.  To implement the "off" argument, /dev/null
is used as the device.

Savecore will fail if handed any options since they are not (yet)
implemented.  All devices marked "dump" or "swap" in /etc/fstab
will be scanned and dumps found will be saved to diskfiles
named from the MD5 hash of the header record.  The header record
is dumped in readable format in the .info file.  The kernel
is not saved.  Only complete dumps will be saved.

All maintainer rights for this code are disclaimed: feel free to
improve and extend.

Sponsored by:   DARPA, NAI Labs
2002-03-31 22:37:00 +00:00
imp
1cd0b5b451 No need to conditionalize on pci being in the kernel for this 2002-03-20 19:13:13 +00:00
ps
d745b728a2 Fix a signed bug in the crashdump code for systems with > 2GB of ram.
Reviewed by:	peter
2001-11-13 01:08:54 +00:00
julian
5596676e6c KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
peter
184cadbfac Fix warning: 186: warning: label `done' defined but not used 2001-06-15 07:26:39 +00:00
phk
d95099399d Make the disk mini-layer check for and handle zero-length transfers
instead of the underlying drivers.
2001-05-06 21:55:22 +00:00
phk
16caeec9b0 Actually biofinish(struct bio *, struct devstat *, int error) is more general
than the bioerror().

Most of this patch is generated by scripts.
2001-05-06 20:00:03 +00:00
ps
2f970352f7 Last commit was broken.. It always prints '[CTRL-C to abort]'.
Move duplicate code for printing the status of the dump and checking
for abort into a separate function.

Pointy hat to:	me
2001-03-28 01:37:29 +00:00
ps
8b18de63df Change the dump routines to only abort if control-c is pressed.
If any other key is pressed, print a message stating that control-c
is how to abort.

Reviewed by:	peter
2001-03-27 06:24:08 +00:00
phk
c47745e977 Send the remains (such as I have located) of "block major numbers" to
the bit-bucket.
2001-03-26 12:41:29 +00:00
markm
36b9aabb47 Turn on interrupt-entropy harvesting for all/any mass storage devices
I could find. I have no doubt missed a couple.

Interrupt entropy harvesting is still conditional on the
kern.random.sys.harvest_interrupt sysctl.
2001-03-01 17:09:09 +00:00
jlemon
88383c1fc4 Add crashdump support.
Tested by:	ps
2001-02-26 22:25:30 +00:00
jlemon
6419a6b9a1 Add a flag value to the board identifiers, and use this to enable the
firmware for selected revisions of the controller.

Spotted by:  Alexander Hausner <alex@hugo.bmg.gv.at>
2001-01-09 14:49:41 +00:00
dwmalone
dd75d1d73b Convert more malloc+bzero to malloc+M_ZERO.
Submitted by:	josh@zipperup.org
Submitted by:	Robert Drehmel <robd@gmx.net>
2000-12-08 21:51:06 +00:00
jlemon
700fece2f3 Add PCI id for the RAID LC2 controller.
Pick up correct location for the DEC version of the chip, this
got broken in a previous commit.
2000-12-01 15:26:11 +00:00
phk
beadbd4365 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
jlemon
b894914ffd Look at both the vendor and subvendor information when determining
whether this is a Smart Array.  This fixes a problem where the driver
would incorrectly match a Dell RAID device.

Reviewed by: msmith
2000-10-13 23:34:47 +00:00
jlemon
57e5ae2fb6 The DEC version of the Smart controller has its configuration information
stored at a different location in the PCI space, so adjust accordingly.

Also, when using more than two smart controllers in one machine, the
disks were assigned the wrong drive number; fix this as well.
2000-07-27 22:24:44 +00:00
jake
961b97d434 Back out the previous change to the queue(3) interface.
It was not discussed and should probably not happen.

Requested by:		msmith and others
2000-05-26 02:09:24 +00:00
jake
d93fbc9916 Change the way that the queue(3) structures are declared; don't assume that
the type argument to *_HEAD and *_ENTRY is a struct.

Suggested by:	phk
Reviewed by:	phk
Approved by:	mdodd
2000-05-23 20:41:01 +00:00
jlemon
a59616f51a Add code which actually checks for the NCR PCI id so it can be used. 2000-05-23 19:27:43 +00:00
jlemon
4a00d6a024 Add PCI ID for NEC/Compaq controller. 2000-05-22 13:59:32 +00:00
jlemon
e6350a4f3c Add PCI id for Compaq Smart Array 431 card. 2000-05-22 13:45:41 +00:00
phk
36c3965ff9 Separate the struct bio related stuff out of <sys/buf.h> into
<sys/bio.h>.

<sys/bio.h> is now a prerequisite for <sys/buf.h> but it shall
not be made a nested include according to bdes teachings on the
subject of nested includes.

Diskdrivers and similar stuff below specfs::strategy() should no
longer need to include <sys/buf.> unless they need caching of data.

Still a few bogus uses of struct buf to track down.

Repocopy by:    peter
2000-05-05 09:59:14 +00:00
jlemon
a704c1a8cd Add PCI identification for another SmartArray 4200, which identifies
itself as a DEC card instead of Compaq.
2000-05-04 20:23:56 +00:00
phk
ce2aa22c93 Remove unneeded #include <sys/kernel.h> 2000-04-29 15:36:14 +00:00
mdodd
93e679510f - Fix a problem with the cdevsw struct that prevented the kernel from
booting on a RAID volume.
- Change 'id_foo' and 'idfoo' to 'idad_foo' and 'idadfoo'.  This makes
  names more consistent with the devices that the code belongs to (more
  in line with the style used in the amr/mlx driver.)

Reviewed by:	 jlemon
2000-04-22 06:28:03 +00:00
phk
6be1308ad1 Remove ~25 unneeded #include <sys/conf.h>
Remove ~60 unneeded #include <sys/malloc.h>
2000-04-19 14:58:28 +00:00
mdodd
9826fdb619 - Define registers as offsets from register base rather than offsets from
EISA slot base.
- Remove unused IOPORT resource.

Reviewed by:	 jlemon
2000-04-16 06:12:08 +00:00
phk
aaaef0b54e Complete the bio/buf divorce for all code below devfs::strategy
Exceptions:
        Vinum untouched.  This means that it cannot be compiled.
        Greg Lehey is on the case.

        CCD not converted yet, casts to struct buf (still safe)

        atapi-cd casts to struct buf to examine B_PHYS
2000-04-15 05:54:02 +00:00
jlemon
e3b952f31d Change the maximum I/O transfer size to DFLTPHYS. This should fix
write corruption that some users were experiencing.
2000-04-13 23:42:55 +00:00
mdodd
31d1db2e71 - Add an additional call to eisa_add_iospace() so we get the right IOPORT
in attach.
- Change a EISA_CHANNEL_CLEAR to EISA_CHANNEL_BUSY in ida_v1_submit().

This may fix the problem with EISA IDA adapters though we have not heard
back from testers yet.

Reviewed by:	 jlemon
2000-04-13 18:09:05 +00:00
phk
8ee11d587f Move B_ERROR flag to b_ioflags and call it BIO_ERROR.
(Much of this done by script)

Move B_ORDERED flag to b_ioflags and call it BIO_ORDERED.

Move b_pblkno and b_iodone_chain to struct bio while we transition, they
will be obsoleted once bio structs chain/stack.

Add bio_queue field for struct bio aware disksort.

Address a lot of stylistic issues brought up by bde.
2000-04-02 15:24:56 +00:00
phk
a246e10f55 Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new
field in struct buf: b_iocmd.  The b_iocmd is enforced to have
exactly one bit set.

B_WRITE was bogusly defined as zero giving rise to obvious coding
mistakes.

Also eliminate the redundant struct buf flag B_CALL, it can just
as efficiently be done by comparing b_iodone to NULL.

Should you get a panic or drop into the debugger, complaining about
"b_iocmd", don't continue.  It is likely to write on your disk
where it should have been reading.

This change is a step in the direction towards a stackable BIO capability.

A lot of this patch were machine generated (Thanks to style(9) compliance!)

Vinum users:  Greg has not had time to test this yet, be careful.
2000-03-20 10:44:49 +00:00
jlemon
11398178a8 Cosmetic fix: "id" -> "idad" for devstat.
Missed in prior (approved) commit by: jlemon
2000-03-08 21:10:15 +00:00
jlemon
ea520bd62c Add support for older EISA compaq cards and newer Smart 4200 cards.
Change disk names to `idad' to avoid naming conflicts with the controller,
and enable the new disk code to pick up the drives.

Tested by:  	david.w.james@bt.com  (existing compaq support)
Reviewed by:	msmith
Approved by:	jordan
2000-03-08 16:16:31 +00:00
ken
235e74ef14 Revamp the devstat priority system. All disks now have the same priority.
The same goes for CD drivers and tape drivers.  In systems with mixed IDE
and SCSI, devices in the same priority class will be sorted in attach
order.

Also, the 'CCD' priority is now the 'ARRAY' priority, and a number of
drivers have been modified to use that priority.

This includes the necessary changes to all drivers, except the ATA drivers.
Soren will modify those separately.

This does not include and does not require any change in the devstat
version number, since no known userland applications use the priority
enumerations.

Reviewed by:	msmith, sos, phk, jlemon, mjacob, bde
1999-12-08 04:45:23 +00:00
mdodd
87e31f4b90 Remove the 'ivars' arguement to device_add_child() and
device_add_child_ordered().  'ivars' may now be set using the
device_set_ivars() function.

This makes it easier for us to change how arbitrary data structures are
associated with a device_t.  Eventually we won't be modifying device_t
to add additional pointers for ivars, softc data etc.

Despite my best efforts I've probably forgotten something so let me know
if this breaks anything.  I've been running with this change for months
and its been quite involved actually isolating all the changes from
the rest of the local changes in my tree.

Reviewed by:	peter, dfr
1999-12-03 08:41:24 +00:00