invalidate pending io and dependencies. However, vinvalbuf() rightfully
does not call vnode_pager_setsize() for us. We must do this here. This
could potentially have caused numerous kinds of bugs, but it was
specifically causing msync() deadlocks because msync() was writing
flushing pages that should not have been valid.
Sponsored by: Isilon Systems, Inc.
Reported by: kkenn
and wd80x3 support. Make the obscure ISA cards optional, and add
those options to NOTES on i386 (note: the ifdef around the whole code
is for module building). Tweak pc98 ed support to include wd80x3 too.
Add goo for alpha too.
The affected cards are the 3Com 3C503, HP LAN+ and SIC (whatever that
is). I couldn't find any of these for sale on ebay, so they are
untested. If you have one of these cards, and send it to me, I'll
ensure that you have no future problems with it...
Minor cleanups as well by using functions rather than cut and paste
code for some probing operations (where the function call overhead is
lost in the noise).
Remove use of kvtop, since they aren't required anymore. This driver
needs to get its memory mapped act together, however, and use bus
space. It doesn't right now.
This reduces the size of if_ed.ko from about 51k to 33k on my laptop.
The difference is that the callout function installed via the
ng_callout() method is guaranteed to NOT fire after the shutdown
method was run (when a node is marked NGF_INVALID). Also, the
shutdown method and the callout function are guaranteed to NOT
run at the same time, as both require the writer lock. Thus
we can safely ignore a zero return value from ng_uncallout()
(callout_stop()) in shutdown methods, and go on with freeing
the node.
The said revision broke the node shutdown -- ng_bridge_timeout()
is no longer fired after ng_bridge_shutdown() was run, resulting
in a memory leak, dead nodes, and inability to unload the module.
Fix this by cancelling the callout on shutdown, and moving part
responsible for freeing a node resources from ng_bridge_timer()
to ng_bridge_shutdown().
Noticed by: ru
Submitted by: glebius, ru
Giant held. In camisr(), move the ccb_bioq elements to a temporary local list
and then process the elements off of that list. This enables the list to be
processed by only taking the ccb_bioq_lock once and only for a very short
time.
ccb_bioq_lock is a leaf mutex, so it's fine to call xpt_done() with other
locks held. This is just a very minor step in the work to lock CAM, but
it allows us to avoid some messy locking/unlock dances in certain drivers.
4 mutex operations per I/O requests.
- Use only one mutex to protect both (incoming and outgoing) queue.
As MUTEX_PROFILING(9) shows, there is no big contention for this lock.
- Protect sc_queue_count with queue mutex, instead of doing atomic
operations on it.
- Remove DROP_GIANT()/PICKUP_GIANT() - ggate is marked as MPSAFE and no
Giant there.
same as the LINKSYS COMBO_ECARD (which also seems to be the same as
another linksys product that also has a modem, but I can't find that
one at the moment). Remove the PCM100, since it is now no longer
used.
o The COMBO_ECARD comes in many flavors, it seems, so probe both the DL10019
and the AX88x90 on it. Since this seems to work with no ill effects, maybe
the probing should happen more generally rather than being table driven.
Need to think more about this.
o Remove PCM100 because it is duplicative (the ETHERFAST is the pcm100 and
apparently has the same IDs). It was here for NetBSD because they match
up an expected MAC address OID, but since we don't bother with that, we
don't need to be so finely discriminating.
o Minor style nit.
if_ed_isa.c, and they seem to not be helpful anymore.
o Fix style issues from de-Pification.
o change from _isa_ to _cbus_ to the largest extent possible to reflect that
this is really for cbus, not isa.
o Use ANSI function definitions.
o Use ed_clear_memory
o eliminate kvtop
which will help to debug hangs on boot.
- Remove 'U' from debug.watchdog sysctl definition, so if we set it to '-1'
it really shows '-1'.
- Fix comment.
Reviewed by: rwatson
behaviour of chflags within a jail. If set to 0 (the default), then a
jailed root user is treated as an unprivileged user; if set to 1, then
a jailed root user is treated the same as an unjailed root user.
This is necessary to allow "make installworld" to work inside a jail,
since it attempts to manipulate the system immutable flag on certain
files.
Discussed with: csjp, rwatson
MFC after: 2 weeks
Give FFS vnodes a specific bufwrite method which contains all the
background write stuff and then calls into the default bufwrite()
for the rest of the job.
Remove all the background write related stuff from the normal bufwrite.
This drags the softdep_move_dependencies() back into FFS.
Long term, it is worth looking at simply copying the data into
allocated memory and issuing the bio directly and not create the
"shadow buf" in the first place (just like copy-on-write is done
in snapshots for instance). I don't think we really gain anything
but complexity from doing this with a buf.
rather than forwarding interrupts from the clock devices around using IPIs:
- Add an IDT vector that pushes a clock frame and calls
lapic_handle_timer().
- Add functions to program the local APIC timer including setting the
divisor, and setting up the timer to either down a periodic countdown
or one-shot countdown.
- Add a lapic_setup_clock() function that the BSP calls from
cpu_init_clocks() to setup the local APIC timer if it is going to be
used. The setup uses a one-shot countdown to calibrate the timer. We
then program the timer on each CPU to fire at a frequency of hz * 3.
stathz is defined as freq / 23 (hz * 3 / 23), and profhz is defined as
freq / 2 (hz * 3 / 2). This gives the clocks relatively prime divisors
while keeping a low LCM for the frequency of the clock interrupts.
Thanks to Peter Jeremy for suggesting this approach.
- Remove the hardclock and statclock forwarding code including the two
associated IPIs. The bitmap IPI handler has now effectively degenerated
to just IPI_AST.
- When the local APIC timer is used we don't turn the RTC on at all, but
we still enable interrupts on the ISA timer 0 (i8254) for timecounting
purposes.
Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can
simulate driver stacking.
In Windows, each loaded driver image is attached to a DRIVER_OBJECT
structure. Windows uses the registry to match up a given vendor/device
ID combination with a corresponding DRIVER_OBJECT. When a driver image
is first loaded, its DriverEntry() routine is invoked, which sets up
the AddDevice() function pointer in the DRIVER_OBJECT and creates
a dispatch table (based on IRP major codes). When a Windows bus driver
detects a new device, it creates a Physical Device Object (PDO) for
it. This is a DEVICE_OBJECT structure, with semantics analagous to
that of a device_t in FreeBSD. The Windows PNP manager will invoke
the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT
and the PDO.
The AddDevice() function then creates a new DRIVER_OBJECT structure of
its own. This is known as the Functional Device Object (FDO) and
corresponds roughly to a private softc instance. The driver uses
IoAttachDeviceToDeviceStack() to add this device object to the
driver stack for this PDO. Subsequent drivers (called filter drivers
in Windows-speak) can be loaded which add themselves to the stack.
When someone issues an IRP to a device, it travel along the stack
passing through several possible filter drivers until it reaches
the functional driver (which actually knows how to talk to the hardware)
at which point it will be completed. This is how Windows achieves
driver layering.
Project Evil now simulates most of this. if_ndis now has a modevent
handler which will use MOD_LOAD and MOD_UNLOAD events to drive the
creation and destruction of DRIVER_OBJECTs. (The load event also
does the relocation/dynalinking of the image.) We don't have a registry,
so the DRIVER_OBJECTS are stored in a linked list for now. Eventually,
the list entry will contain the vendor/device ID list extracted from
the .INF file. When ndis_probe() is called and detectes a supported
device, it will create a PDO for the device instance and attach it
to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call
our NdisAddDevice() handler to create the FDO. The NDIS miniport block
is now a device extension hung off the FDO, just as it is in Windows.
The miniport characteristics table is now an extension hung off the
DRIVER_OBJECT as well (the characteristics are the same for all devices
handled by a given driver, so they don't need to be per-instance.)
We also do an IoAttachDeviceToDeviceStack() to put the FDO on the
stack for the PDO. There are a couple of fake bus drivers created
for the PCI and pccard buses. Eventually, there will be one for USB,
which will actually accept USB IRP.s
Things should still work just as before, only now we do things in
the proper order and maintain the correct framework to support passing
IRPs between drivers.
Various changes:
- corrected the comments about IRQL handling in subr_hal.c to more
accurately reflect reality
- update ndiscvt to make the drv_data symbol in ndis_driver_data.h a
global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it.
- Obtain the softc pointer from the miniport block by referencing
the PDO rather than a private pointer of our own (nmb_ifp is no
longer used)
- implement IoAttachDeviceToDeviceStack(), IoDetachDevice(),
IoGetAttachedDevice(), IoAllocateDriverObjectExtension(),
IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(),
IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(),
IoInitializeIrp()
- fix a few mistakes in the driver_object and device_object definitions
- add a new module, kern_windrv.c, to handle the driver registration
and relocation/dynalinkign duties (which don't really belong in
kern_ndis.c).
- made ndis_block and ndis_chars in the ndis_softc stucture pointers
and modified all references to it
- fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they
work correctly with the new driver_object mechanism
- changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver()
(which is now deprecated)
- used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines
instead of kludged up alloc/free routines
- added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
The "business class upgrade" was implemented in UFS's VOP_LOCK
implementation ufs_lock() which is the wrong layer, so move it to
ffs_lock().
Also, as long as we have not abandonned advanced vfs-stacking we
should not preclude it from happening: instead of implementing a
copy locally, use the VOP_LOCK_APV(&ufs) to correctly arrive at
vop_stdlock() at the bottom.
The "business class upgrade" was implemented in UFS's VOP_LOCK
implementation ufs_lock() which is the wrong layer, so move it to
ffs_lock().
Also, as long as we have not abandonned advanced vfs-stacking we
should not preclude it from happening: instead of implementing a
copy locally, use the VOP_LOCK_APV(&ufs) to correctly arrive at
vop_stdlock() at the bottom.
This allows stacked or partitioned filesystems to say "Continue
the normal resolution from here", for instace from FFS to UFS.
Use VNASSERT() instead of KASSERT().
