Commit Graph

48915 Commits

Author SHA1 Message Date
gallatin
8baedda6af Add AlphaServer 2000 (demi-sable), 2100 (sable), and 2100A (lynx) support.
Only PCI and on-board ISA peripherials are supported at this time.

This support has been only lightly tested due to a lack of response to my
call for testers on the freebsd-alpha mailing list.  It works quite well
on the one AS2100 on which it has been tested, but it may not work on
an AS2100A and should therefore be regarded as experimental.
2000-05-28 02:52:54 +00:00
gallatin
11726c37b1 Allow platform specific isa interrupt setup & teardown routines in
preparation for sable/lynx support
2000-05-28 02:40:53 +00:00
kris
fe35a924a7 Silence warnings. 2000-05-27 22:38:03 +00:00
chris
ef06afc4d3 Fix a misspelling: undefied -> undefined 2000-05-27 22:02:32 +00:00
obrien
d25477b7e7 MFA: Add {kernel,module}-{depend,clean,cleandepend,tags,install,reinstall}
targets.  The {depend,clean,cleandepend,tags,install,reinstall} targets
are composits of the {kernel,module}-* targets (based on NO_MODULES).
2000-05-27 21:50:15 +00:00
obrien
db6962481c Use /sys/sys/*.h over /usr/include/sys.
No repsonce from:	Maintainer
2000-05-27 21:35:47 +00:00
imp
d657219e1f Add entry for new binutils that are needed to properly rebuild the
kernel.
2000-05-27 21:20:07 +00:00
wilko
58e3e4be42 Add suggested comment for TCP_DROP_SYNFIN and TCP_RESTRICT_RST
PR:		conf/18124
Submitted by:	Matt Heckaman <matt@arpa.mail.net>
2000-05-27 18:03:15 +00:00
cg
2d78819395 fix the return value of the SOUND_PCM_WRITE_CHANNELS ioctl
re-enable old pcm ioctls
2000-05-27 14:40:17 +00:00
dfr
d9bdefd5d5 Use bus_space_handle_t instead of bus_space_tag_t to hold the result
from rman_get_bushandle().
2000-05-27 10:02:32 +00:00
dfr
f7c488ce24 Update to use newbus and busspace. 2000-05-27 09:27:36 +00:00
jhb
a8972b65e2 - Remove unnecessary 'data32' and 'addr32' prefixes and #define's.
- Go ahead and use 'lgdt' again instead of hand-assembling the instruction.
  During testing this code worked fine.  If for some reason a 32-bit offset
  is needed, 'lgdtl' should be used instead of reverting to manual machine
  code.

Tested by:	peter
2000-05-27 06:25:35 +00:00
imp
2bfcae8790 Add IBM 56K Modem (PR 17992, Jeroen C. van Gelderen)
Fix D-Link 660 entry (PR 1340, Annelise Anderson)
Add more comments to very generic pcmcia ethernet card
  entry (PR 17006, Georg Graf)
Add Linksys EtherFast 10/100 Intergrated PC Card (PCM100) (private mail
  from Sean O'Connell)

PRs: 17006, 13402, 17992
2000-05-27 04:48:30 +00:00
obrien
797ccd6333 Fix conflicts. 2000-05-27 02:43:50 +00:00
obrien
2213994dde This commit was generated by cvs2svn to compensate for changes in r60967,
which included commits to RCS files with non-trunk default branches.
2000-05-27 02:25:28 +00:00
obrien
890b30850f Bring in bug fixes from the GCC anoncvs server's "gcc-2_95-branch"
branch as of May 26th, 2000.  [these are changes March 31 - May 24th]
2000-05-27 02:25:28 +00:00
peter
ea11d3cf1c Use .include <bsd.kmod.mk> to get to ../../*/conf/kmod.mk instead of
encoding the relative path.
2000-05-27 01:14:33 +00:00
peter
dc4154923a Sigh. Use the correct path to bsd.conf.mk. It's times like this that I
regret giving up coffee.
2000-05-27 01:11:17 +00:00
peter
ceb61b84b4 Add bsd.kmod.mk back. 2000-05-27 00:54:45 +00:00
peter
2545eef3a2 Revive a skeleton for bsd.kmod.mk (which will be in the make search path)
that merely locates and includes sys/conf/kmod.mk.
2000-05-27 00:54:15 +00:00
dcs
50900cd7f6 Strip spaces and comments more agressively. 2000-05-26 22:58:10 +00:00
cg
fe693a0d08 move various fields from pcm_channel to snd_dbuf
improve chn_read code- don't stop/restart on overrun, just dump data

more error checking on ioctls
2000-05-26 21:55:13 +00:00
cg
437ef4fa6b if we have a codec init routine, fail the attach if init fails 2000-05-26 21:42:50 +00:00
dcs
7a420274fb Bring in FICL 2.04. No bump of loader version is required by this
commit.
2000-05-26 21:35:08 +00:00
cg
e7de7487d9 handle emulated dma reads
don't try to get sample size from snd_dbuf
2000-05-26 21:15:47 +00:00
brian
8c66999e1d If the fsm header reports a length greater than the packet size,
drop the packet rather than just whinging about it in the log.
If the fsm header has a smaller length, continue to whinge.
2000-05-26 21:11:55 +00:00
msmith
2f58d03cd5 Some joker decided to make it even harder to build modules outside the
kernel, and rather than fix the make search path, hardcoded it into the
module Makefiles themselves.  Go with the herd.
2000-05-26 20:07:29 +00:00
des
96fd818f66 Hackish support for 302 redirect. 2000-05-26 15:34:42 +00:00
sos
c356d44517 If devclass_alloc_unit() is called with a wired unit #, and this is
buzy, only search upwards for a free slot to use..

This broke unit numbering on ATA systems where PCI attached controllers
come before the mainboard ones...

Reviewed by: dfr
2000-05-26 13:59:05 +00:00
gallatin
0eb0bb6777 Rather than checking for hlen causing misalignment, we should do the
m_adj() and then check the resulting mbuf for misalignment, copying
backwards to align the mbuf if required.

This fixes a longstanding problem where an mbuf which would have been
properly aligned after an m_adj() was being misaligned and causing an
unaligned access trap in ip_input().  This bug only triggered when booting
diskless.

Reviewed by:	dfr
2000-05-26 13:47:02 +00:00
des
2a39533c00 Honor FTP_PASSIVE_MODE so caller doesn't need to. 2000-05-26 12:56:53 +00:00
nyan
b7c41fbb0d Fixed header file path (machine/lpt.h -> dev/ppbus/lptio.h). 2000-05-26 12:25:01 +00:00
tanimura
2b7240682f Add SUP1670 - Supra 336i V+ Intl. Since we update the PnP IDs
more frequently than the core part of the sio driver, it might
be good to move the PnP IDs to sio_isapnp.h or something like
that.

PR:		i386/18828
Submitted by:	J.P. King <jpk28@cam.ac.uk>
2000-05-26 11:41:08 +00:00
brian
61fc03a88c Remove an unused variable 2000-05-26 08:29:11 +00:00
brian
c756c66b29 When we do a `dial'' or `open'' from DATALINK_READY, go to
DATALINK_CARRIER and turn off scripting.

This should fix instances where ``term'' is used followed by ~.
and then ``dial''/``open'' (it currently just sits there looking
at you).

Reported by: Tim Vanderhoek <vanderh@ecf.utoronto.ca>
2000-05-26 08:26:56 +00:00
darrenr
1816cb0fd4 define CSUM_DELAY_DATA to match merge 2000-05-26 07:28:03 +00:00
asmodai
c49f469710 Resolve conflicts. 2000-05-26 07:24:14 +00:00
asmodai
5ebe588081 This commit was generated by cvs2svn to compensate for changes in r60940,
which included commits to RCS files with non-trunk default branches.
2000-05-26 07:17:19 +00:00
asmodai
3f83b2963e Virgin import of BIND v8.2.3-T5B 2000-05-26 07:17:19 +00:00
jake
961b97d434 Back out the previous change to the queue(3) interface.
It was not discussed and should probably not happen.

Requested by:		msmith and others
2000-05-26 02:09:24 +00:00
obrien
06b6467218 Add the 'Z' key to the slice editor. Hitting it toggles the units the
sizes are displayed in.

Ok'ed by:	murray
2000-05-26 00:38:20 +00:00
obrien
c428cea528 Bump __FreeBSD_version after the Binutils upgrade -- just in case a port
or someone needs to decern the event.
2000-05-26 00:22:48 +00:00
n_hibma
9463a16709 Regen. 2000-05-25 22:29:47 +00:00
n_hibma
0f40505a4f New entries (Mike Meyer) 2000-05-25 22:27:55 +00:00
tegge
055edbc9e3 Reintroduce a workaround for a gas bug (misassembled lgdt instruction)
Use .code16 for the real mode part of the AP bootstrap trampoline code.
2000-05-25 21:33:52 +00:00
dirk
ac80812473 Remove -a from mkisofs' argument list. It's the default for version 1.12.1
and up and causes mkisofs to fail if present.

Add $FreeBSD$ while I'm here.

Ok'ed by:	jkh
2000-05-25 20:12:10 +00:00
nsayer
1779ef3d1c 1. Add IPv6 portrange restriction code (-U flag) to passive().
2. Add portrange restriction code (for both v4 and v6) to the EPSV
processing stuff.
2000-05-25 19:30:18 +00:00
des
969e1c4e0d Output newline after debugging message 2000-05-25 16:50:08 +00:00
des
59892af9b1 Add (and document) fetchMakeURL() 2000-05-25 16:46:09 +00:00
ume
96ab0c2c8f IPv6 support.
Add $FreeBSD$.
2000-05-25 16:38:22 +00:00