in those cases:
1. File system was mounted by an unprivileged user.
2. File system was mounted by an unprivileged root user.
3. File system was mounted by a privileged non-root user.
Point 1 is when file system was mounted by unprivileged user
(sysctl vfs.usermount was equal to 1 then).
Point 2 is when file system was mounted by root, while sysctl
security.bsd.suser_enabled is set to 0 and sysctl vfs.usermount
is set to 1.
Point 3 is because we want to be ready for capabilities.
Reviewed by: rwatson
Approved by: scottl (mentor)
is all zeros. The kernel now consistently zeroes FSIDs for non-root
users, so there's no point in printing these.
Also fix a number of compiler warnings, including two real bugs:
- a bracket placement bug caused `mount -t ufs localhost:/foo /mnt'
to override the `-t ufs' specification and use mount_nfs.
- an unitialised variable was used instead of _PATH_SYSPATH when
warning that the mount_* program cound not be found.
Submitted by: Rudolf Cejka <cejkar@fit.vutbr.cz> (FSID part)
Approved by: re (scottl)
ID for each file system in addition to the normal information.
In umount(8), accept filesystem IDs as well as the usual device and
path names. This makes it possible to unambiguously specify which
file system is to be unmounted even when two or more file systems
share the same device and mountpoint names (e.g. NFS mounts from
the same export into different chroots).
Suggested by: Dan Nelson <dnelson@allantgroup.com>
remove all the code which was trying to do so.
This code was nasty in several ways, it was hiding
the kernel bug where the kernel was unable to properly
load a module, and it was quitting if it wasn't able
to load the module. The consequence is that an ABI
breakage of the vfsconf API would have broken *every*
mount utility.
kernel access control.
Teach mount(8) to understand the MNT_MULTILABEL flag, which is used
to determine whether a file system operates with individual per-vnode
labels, or treats the entire file system as a single object with a
single (mount) label. The behavior here will probably evolve some
now that nmount(2) is available and can more flexibly support mount
options.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
the filesystem type isn't given in the command line. In the case of
an IPv6 address containing ':', one must use the '@' separator for it
to be properly parsed (mount_nfs(8) still needs fixing at the moment
though).
PR: bin/37230
Reviewed by: obrien
MFC after: 1 week
least in -w's case, simply unsetting the correct bit in init_flags was not
enough. The bit may be reset later if, say, the filesystem is marked `ro'
in fstab. The command line option should override the fstab setting, but
did not. The implementation of -r was changed for consistency.
PR: 26886
Reviewed by: archie
verbose mode) is specified. This should really have been the case
when this extra cruft was first introduced in rev 1.23.
PR: 20710
Reported by: Mike Meyer <mwm@mired.org>
Kirk argees that the comment about corruption caused by switching the flags
on an already mounted manpage are bogus, it doesn't happen.
Ok by: mckusick
Changes are:
- rpc.umntall is called at the right places now in /etc/rc*
- rpc.umntall timeout has been lowered from two days (too high) to one
- verbose messages in rpc.umntall have been clarified
- kill double entries in /var/db/mounttab when rpc.umntall is invoked
- ${early_nfs_mounts} has been removed from /etc/rc
- patched mount(8) -p to print different pass/dump values for ufs filesystems.
(last patch recieved from dan <bugg@bugg.strangled.net>)
Submitted by: Martin Blapp <mbr@imp.ch>, dan <bugg@bugg.strangled.net>
1. Get rid of the evilly bogus strdup(fstab) and free if (fstab == "")
as in umount.
2. Don't use /etc/fstab info if the mount instance does not exactly match
the fstab entry.
3. Reversed the mountpoint checking order in getmntpt().
4. Clarify the "not mounted" error message in mount -u. The previous
"unknown special file or file system" wasn't quite right.
5. Get rid of a 1-byte memory leak; this was reported by jhb.
Submitted by: Martin Blapp <mb@imp.ch>
Made mount more userfriendly (bad slashes are now filtered out)
and we remove in mount_nfs trailing slashes if there are any.
Fixed mount_xxx binarys to resolve with realpath(3)
the mountpoint.
Translate the deprecated nfs-syntax with '@' to ':' .
The ':' syntax has now precedence, but '@' still works.
Notify the user that the '@' syntax should not be used.
PR: 7846
PR: 13692
Submitted by: Martin Blapp <mb@imp.ch>
Reviewed by: phk
Original patch from Adrian. Martin added a check for free().
- Included the filesystem type in output of mount
PR: bin/13143
Submitted-By: Martin Blapp <mblapp@kassiopeja.lan.attic.ch>
options:
-o fstab brings in filesystem options specified in /etc/fstab
-o current incorporates the current set of options for the file
system
The rightmost option wins in the case of conflicting options being
specified.
E.g.:-
# mount -u -o current,nosuid /home
will preserve the current mount options while adding the 'nosuid' flag.
2. Rewording of manual page to be hopefully clearer; small -Wall
cleanups.
Thanks to David Malone for his patience and willingness to work
multiple patches on request.
PR: bin/6399
Submitted by: David Malone <dwmalone@maths.tcd.ie>
getvfsent() in most cases. (The main exception is when /etc/fstab
still hasn't been converted to use a slice for the root device, the
root device is a SCSI device, and the /dev/sd* inode for this device
still hasn't been renamed to /dev/da*.)
something that might refer to the compatability slice rather than the
correct slice entry, try all the possible slice entries first.
This is a compatability hack to deal with the case where the kernel has
correctly mounted the root filesystem out of its slice, but the user
has not updated their /etc/fstab file to reflect this. A diagnostic
is emitted if the mount succeeds, indicating that the file should be
updated.
This is a prelude to fixing the kernel to behave as alluded to above.
Reviewed by: (discussed with) julian, phk
Obtained from: Whistle Communications tree
Add an option to the way UFS works dependent on the SUID bit of directories
This changes makes things a whole lot simpler on systems running as
fileservers for PCs and MACS. to enable the new code you must
1/ enable option SUIDDIR on the kernel.
2/ mount the filesystem with option suiddir.
hopefully this makes it difficult enough for people to
do this accidentally.
see the new chmod(2) man page for detailed info.
errors (mis-sorted prototypes, duplicated MNT_NOATIME, duplicated NULL
mntopts fixup).
Updated getopt() usage.
Fixed style bugs in FreeBSD changes (one or two per line for putfsent()
stuff).
- use new getvfsbyname() interface and mount(2) interface
**DANGER WILL ROBINSON!!** You must be running a -current kernel
from within a week or so in order for this to work!
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
the file access time update on reads and can be useful in reducing
filesystem overhead in cases where the access time is not important (like
Usenet news spools).
inspired by SunOS version of mount which uses option -p to
indicate that the mount information should be printed in fstab
format.
This is a neat way to create a new fstab file to use later when
one has modified the mount points or mount options or added or
removed mount some mount points. You just type
mount -p > /etc/fstab.new
and there is your new fstab file ready to be used though you
will of course have to add any necessary noauto flags manually.
[Committers note: This also seems to do the wrong thing for AMD
mounts, but in the more average case this is a nifty feature nonetheless
and one can always edit the bogus entries out]
Submitted-By: Jukka Ukkonen <jau@jau.csc.fi>
found when the user specifies "mount -t type". Instead of printing
out one message for each path element (/sbin, /usr/sbin), it prints
out:
mount: exec mount_type not found in /sbin, /usr/sbin: No such file or directory
The code is quite long for such a stupid little piece of aesthesism
but it is very straghtforward so I guess it's ok. Besides, I don't
want to do a "char foo[100];" and have malloc break down when someone
decides to add a few more paths to a variable that's far apart from
this code. :)
By the way, there is no malloc() off-by-one error for the '\0' at the
end of the string although I don't explicitly add 1 to the length.
The code allocates strlen(path element)+2 bytes for each path element,
and doesn't use the last two bytes (for the delimiting ", ").
Reviewed by: the list (I hope)
device file and the mount point. This prevents the "unexpected recursive
lock" panic from happening.
This is a temporary fix. A kernel fix would be much much more ugly than
this, and still wouldn't be the "right" way to fix it. After some
of Terry's file system rework is installed, it will be possible to
properly fix this problem in a clean manner. Until then,
this change should prevent use from getting a problem report
on this every month or so (and I just noticed that someone in
one of the freebsd news groups was complaining about this problem, too).
spit out two error lines for a bogus filesystem type, e.g:
root@time-> mount -t foo /dev/sd0a /mnt
mount: exec /sbin/mount_foo for /mnt: No such file or directory
mount: exec /usr/sbin/mount_foo for /mnt: No such file or directory
But I would submit that if you're even going to scan multiple directories
for a mount_foo (which I actually think is somewhat bogus - if it's not
in /sbin, you're probably in big trouble anyway), you should emit an error
for each one. I got multiple complaints (in addition to the PR) that the
existing behavior was very confusing.
from not coming up multiuser just because you have a CD mount in fstab
but no CD in the drive.
Submitted by: "Full Name Not Supplied" <simon@masi.ibp.fr>
when the single user shell was terminated. These changes disallow mounting
or R/W upgrading filesystems that are dirty unless "-f" (force) option
is used with mount. /etc/rc has been modified to abort the startup if
one or more non-nfs partitions fail to mount.
Reviewed by: Poul-Henning Kamp, Rod Grimes
most common cd9660 and nfs options like God intended them. (It is now
possible to say
mount -o ro,soft,bg,intr there:/foo/bar /foo/bar
again.) This whole getmntopt() business is an incredible botch;
it never should have been anything more than a wrapper around
getsubopt(3). Because if the way the current hackaround is implemented,
options which take arguments (like the old `rsize' and `wsize') are still
unavailable, and must be accessed the new, broken way.
(It's unimaginable how Berkeley managed to screw up one of the few things
about NFS that Sun actually got right to begin with!)