It doesn't _really_ help all that much, I'll commit something to
sys/net/if.c at some point explaining why, but the lock should be held
when checking/manipulating/branching because of said lock.
comlock, I'd like to find and analyse these cases to see if they
really are valid.
So, throw in a lock here and wait for the (hopefully!) inevitable
complaints.
- Remove all attempts to guess physical temperature using DiodeOffset.
There are too many reports that it varies wildly depending on motherboard.
Instead, if it is known to scale well and its offset is known from other
temperature sensors on board, the user may set "dev.amdtemp.0.sensor_offset"
tunable to compensate the difference. Document the caveats in amdtemp(4).
- Add a quirk for Socket AM2 Revision G processors. These processors are
known to have a different offset according to Linux k8temp driver.
- Warn about Family 10h Erratum 319. These processors have broken sensors.
- Report temperature in more logical orders under dev.amdtemp node. For
example, "dev.amdtemp.0.sensor0.core0" is now "dev.amdtemp.0.core0.sensor0".
- Replace K8, K10 and K11 with official processor names in amdtemp(4).
v_writecount. Keep the amount of the virtual address space used by
the mappings in the new vm_object un_pager.vnp.writemappings
counter. The vnode v_writecount is incremented when writemappings gets
non-zero value, and decremented when writemappings is returned to
zero.
Writeable shared vnode-backed mappings are accounted for in vm_mmap(),
and vm_map_insert() is instructed to set MAP_ENTRY_VN_WRITECNT flag on
the created map entry. During deferred map entry deallocation,
vm_map_process_deferred() checks for MAP_ENTRY_VN_WRITECOUNT and
decrements writemappings for the vm object.
Now, the writeable mount cannot be demoted to read-only while
writeable shared mappings of the vnodes from the mount point
exist. Also, execve(2) fails for such files with ETXTBUSY, as it
should be.
Noted by: tegge
Reviewed by: tegge (long time ago, early version), alc
Tested by: pho
MFC after: 3 weeks
a new jail parameter node with the following parameters:
allow.mount.devfs:
allow mounting the devfs filesystem inside a jail
allow.mount.nullfs:
allow mounting the nullfs filesystem inside a jail
Both parameters are disabled by default (equals the behavior before
devfs and nullfs in jails). Administrators have to explicitly allow
mounting devfs and nullfs for each jail. The value "-1" of the
devfs_ruleset parameter is removed in favor of the new allow setting.
Reviewed by: jamie
Suggested by: pjd
MFC after: 2 weeks
at which the lle_tbl pointer points to freed memory and the llt_free pointer is no longer
valid.
Move the free pointer in to the llentry itself and update the initalization sites.
MFC after: 2 weeks
"panic in 8.3-PRERELEASE" on Feb. 22, 2012. This panic was caused
by use of a mix of tsleep() and msleep() calls on the same event
in the new NFS server DRC code. It did "mtx_unlock(); tsleep();"
in two places, which kib@ noted introduced a slight risk that the
wakeup() would occur before the tsleep(), resulting in a 10sec
delay before waking up. This patch fixes the problem by replacing
"mtx_unlock(); tsleep();" with mtx_sleep(..PDROP..). It also
changes a nfsmsleep() call to mtx_sleep() so that the code uses
mtx_sleep() consistently within the file.
Tested by: hrs (in progress)
Reviewed by: jhb
MFC after: 5 days
to the debugger. When reparenting for debugging, keep the child in
the new orphan list of old parent. When looping over the children in
kern_wait(), iterate over both children list and orphan list to search
for the process by pid.
Submitted by: Dmitry Mikulin <dmitrym juniper.net>
MFC after: 2 weeks
I'm not sure _why_ the ic is NULL here, but I've seen it occasionally do
this after I've been tinkering with things for a while. It ends up
crashing in a call to ath_chan_set() via the net80211 scan code and scan
task.
don't give RX path more priority than TX path.
Also remove infinite loop in interrupt handler and limit number of
iteration to 32. This change addresses system load fluctuations
under high network load.
found on Adaptec AIC-6915 Starfire ethernet controller.
While here, use status register to know resolved speed/duplex.
With this change, sf(4) correctly reports speed/duplex of
established link.
Reviewed by: marius
the traffic flow, this may not be the case giving poor traffic distribution.
Add a sysctl which allows us to fall back to our own flow hash code.
PR: kern/164901
Submitted by: Eugene Grosbein
MFC after: 1 week
UMTX_OP_WAIT. Upper 16bits is enough to hold a clock id, and lower
16bits is used to pass flags. The change saves a clock_gettime() syscall
from libthr.
- Centralize address assignment
- Make sure managment ports get first MAC address in pool
- Properly propagate fail if address allocation failed
Submitted by: Andrew Duane <aduane@juniper.net>
sys/dev/hpt27xx/osm_bsd.c, since it gets the following warnings:
sys/dev/hpt27xx/osm_bsd.c:1180:25: error: format string is not a string literal (potentially insecure) [-Werror,-Wformat-security]
S_IRUSR | S_IWUSR, driver_name);
^~~~~~~~~~~
@/dev/hpt27xx/hpt27xx_config.h:46:21: note: expanded from:
#define driver_name hpt27xx_driver_name
^~~~~~~~~~~~~~~~~~~
Since 'hpt27xx_driver_name' is a constant string symbol (coming from the
proprietary hpt27xx_lib.o file), there is no security problem.
Because this driver is provided by the vendor, and applying changes
requires re-certification and other bureaucratic exercises, just disable
the warning for now.
MFC after: 1 week
several sys/cam/ctl files, since these get the following warnings:
In file included from sys/cam/ctl/ctl_backend.c:60:
sys/cam/ctl/ctl_private.h:300:30: error: variable 'page_index_template' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
static struct ctl_page_index page_index_template[] = {
^
These warnings are tricky to fix without a lot of overhaul, and they are
harmless, so disable them for now.
MFC after: 1 week
Add the sysctl debug.iosize_max_clamp, enabled by default. Setting the
sysctl to zero allows to perform the SSIZE_MAX-sized i/o requests from
the usermode.
Discussed with: bde, das (previous versions)
MFC after: 1 month
types 0x05 and 0x0f, but 0x05 is preferred and used when partition is
created with "gpart add -t ebr ...".
This should keep EBR partitions accessible after r231754 for those,
who have EBR on the partition with type 0x0f.
- In case the parent is bge(4), don't set the Jumbo frame settings unless
the MAC actually is Jumbo capable as otherwise the PHY might not have the
corresponding registers implemented. This is also in line with what the
Linux tg3 driver does.
PR: 165032
Submitted by: Alexander Milanov
Obtained from: OpenBSD
MFC after: 3 days
hold the lock.
This is part of my series of work to try and capture when net80211
locking isn't.
ObNote: it'd be nice to be able to mark a lock as "assert if the lock
is dropped", so I could capture functions which decide that dropping
and reacquiring the lock is a good idea (without re-checking the
sanity of the state protected by the lock.)
Vnode-backed mappings cannot be put into the kernel map, since it is a
system map.
Use exec_map for transient mappings, and remove the mappings with
kmem_free_wakeup() to notify the waiters on available map space.
Do not map the whole executable into KVA at all to copy it out into
usermode. Directly use vn_rdwr() for the case of not page aligned
binary.
There is one place left where the potentially unbounded amount of data
is mapped into exec_map, namely, in the COFF image activator
enumeration of the needed shared libraries.
Reviewed by: alc
MFC after: 2 weeks
devices that are unplugged via QEMU.
sys/dev/xen/blkback/blkback.c:
Toolstack initiated closures change the frontend's state
to Closing. The backend must change to Closing as well,
even if we can't actually close yet, in order for the
frontend to notice and start the closing process.
MFC after: 3 days
- remove the KEVENT code, which was incomplete and not compiled anyways;
- change some while() loops into for()
- adjust indentation
- remove extra whitespace
MFC after: 1 week
struct ccb_pathinq from sys/cam/cam_ccb.h wasn't added to stable/7 at all
and didn't appear in stable/8 until svn R195534. Since __FreeBSD_version
did not get bumped until svn R195634, assume that maxio is valid at 800102
or higher.
Obtained from: Yahoo! Inc.
MFC after: 0 days
with RX/TX halting.
* Always disable/enable interrupts during a channel change, just to simply
things.
* Ensure that the ath taskqueue has completed and is paused before
continuing.
This dramatically reduces the instances of overlapping RX and reset
conditions.
PR: kern/165220
Extend the so far IPv4-only support for multiple routing tables (FIBs)
introduced in r178888 to IPv6 providing feature parity.
This includes an extended rtalloc(9) KPI for IPv6, the necessary
adjustments to the network stack, and user land support as in netstat.
Sponsored by: Cisco Systems, Inc.
Reviewed by: melifaro (basically)
MFC after: 10 days
The previous code did not limit the I/O request size based on
the maximum number of segments supported by the back-end. In
current practice, since the only back-end supporting chained
requests is the FreeBSD implementation, this limit was never
exceeded.
sys/dev/xen/blkfront/block.h:
Add two macros, XBF_SEGS_TO_SIZE() and XBF_SIZE_TO_SEGS(),
to centralize the logic of reserving a segment to deal with
non-page-aligned I/Os.
sys/dev/xen/blkfront/blkfront.c:
o When negotiating transfer parameters, limit the
max_request_size we use and publish, if it is greater
than the maximum, unaligned, I/O we can support with
the number of segments advertised by the backend.
o Don't unilaterally reduce the I/O size published to
the disk layer by a single page. max_request_size
is already properly limited in the transfer parameter
negotiation code.
o Fix typos in printf strings:
"max_requests_segments" -> "max_request_segments"
"specificed" -> "specified"
MFC after: 1 day
- Make hash sizes growable, to satisfy users running large mpd
installations, having thousands of nodes.
- NG_NAMEHASH() proved to give a very bad distribution in real life
name sets, while generic hash32_str(name, HASHINIT) proved to give
an even one, so you the latter for name hash.
- Do not store unnamed nodes in slot 0 of name hash, no reason for that.
- Use the ID hash in cases when we need to run through all nodes: the
NGM_LISTNODES command and in the vnet_netgraph_uninit().
- Implement NGM_LISTNODES and NGM_LISTNAMES as separate code, the former
iterates through the ID hash, and the latter through the name hash.
- Keep count of all nodes and of named nodes, so that we don't need
to count nodes in NGM_LISTNODES and NGM_LISTNAMES. The counters are
also used to estimate whether we need to grow hashes.
- Close a race between two threads running ng_name_node() assigning same
name to different nodes.
messages were printed.
This can be enabled with the kern.msgbuf_show_timestamp sysctl
PR: kern/161553
Reviewed by: avg
Submitted by: Arnaud Lacombe <lacombar@gmail.com>
Approved by: cperciva
MFC after: 1 month
spinlock_enter()/spinlock_exit() to save/restore RFLAGS. We know interrupt
is disabled when returning from S3. For AP, we do not have to save/restore
it because IRET will do it for us any way. Do not save CR3 locally because
savectx() does it and BSP does not have to switch to kernel map for amd64.
Change contigmalloc(9) flag while I am in the neighborhood.
Introduce some functions to map NIC ring indexes into netmap ring
indexes and vice versa. This way we can implement the bound
checks only in one place (and hopefully in a correct way).
On passing, make the code and comments more uniform across the
various drivers.
Mask off the first 16 pages unless we appear to be running in a VM. This
address may be overridden by 'hw.physmem.start' tunable from loader.
Note Linux used to have a BIOS quirk table for this issue but it seems they
made it default recently.
hz >> 1000 and thus getting outside the timestamp clock frequenceny of
1ms < x < 1s per tick as mandated by RFC1323, leading to connection
resets on idle connections.
Always use a granularity of 1ms using getmicrouptime() making all but
relevant callouts independent of hz.
Use getmicrouptime(), not getmicrotime() as the latter may make a jump
possibly breaking TCP nfsroot mounts having our timestamps move forward
for more than 24.8 days in a second without having been idle for that
long.
PR: kern/61404
Reviewed by: jhb, mav, rrs
Discussed with: silby, lstewart
Sponsored by: Sandvine Incorporated (originally in 2011)
MFC after: 6 weeks
don't try probe and create EBR scheme when parent partition type
is not "ebr". This fixes error messages about corrupted EBR for
some partitions where is actually another partition scheme.
NOTE: if you have EBR on the partition with different than "ebr"
(0x05) type, then you will lost access to partitions until it will be
changed.
MFC after: 2 weeks
FreeBSD's front and back Xen blkif interface drivers.
sys/dev/xen/blkfront/block.h:
sys/dev/xen/blkfront/blkfront.c:
sys/dev/xen/blkback/blkback.c:
Replace FreeBSD specific multi-page ring impelementation with
support for both the Citrix and Amazon/RedHat versions of this
extension.
sys/dev/xen/blkfront/blkfront.c:
o Add a per-instance sysctl tree that exposes all negotiated
transport parameters (ring pages, max number of requests,
max request size, max number of segments).
o In blkfront_vdevice_to_unit() add a missing return statement
so that we properly identify the unit number for high numbered
xvd devices.
sys/dev/xen/blkback/blkback.c:
o Add static dtrace probes for several events in this driver.
o Defer connection shutdown processing until the front-end
enters the closed state. This avoids prematurely tearing
down the connection when buggy front-ends transition to the
closing state, even though the device is open and they
veto the close request from the tool stack.
o Add nodes for maximum request size and the number of active
ring pages to the exising, per-instance, sysctl tree.
o Miscelaneous style cleanup.
sys/xen/interface/io/blkif.h:
o Add extensive documentation of the XenStore nodes used to
implement the blkif interface.
o Document the startup sequence between a front and back driver.
o Add structures and documenatation for the "discard" feature
(AKA Trim).
o Cleanup some definitions related to FreeBSD's request
number/size/segment-limit extension.
sys/dev/xen/blkfront/blkfront.c:
sys/dev/xen/blkback/blkback.c:
sys/xen/xenbus/xenbusvar.h:
Add the convenience function xenbus_get_otherend_state() and
use it to simplify some logic in both block-front and block-back.
MFC after: 1 day
This allows LUNs greater than 0 to be probed. It can be increased later if
need be.
This brings back SVN rev 224973, which was inadvertently removed with the
import of the LSI driver.
Reported by: dwhite
MFC after: 3 days
set all three of the kernel, supervisor, and user-mode 64-bit mode
flags. While FreeBSD does not currently use the supervisor ring (and
hence this is effectively a NOP on most systems), doing this avoids
triggering an exception on 64-bit MIPS CPUs that don't support 32-bit
compatibility mode, and therefore don't allow clearing the SX bit.
Reviewed by: gonzo
MFC after: 3 days
Sponsored by: DARPA, SRI International
The lang/gcc* ports patch headers where they think something is
non-standard. These patched headers override the system headers which means
you have to rebuild these ports whenever you do installworld to make sure
they contain the latest changes.
- Address performance regressions encountered by das@ by caching per-thread
data in TLS where available.
- Add a __NO_TLS flag to cdefs.h to indicate where not available.
- Reorganise the xlocale.h definitions into xlocale/*.h so that they can be
included from multiple places.
- Export the POSIX2008 subset of xlocale when POSIX2008 says it should be
exported, independently of whether xlocale.h is included.
- Fix the bug where programs using ctype functions always assumed ASCII unless
recompiled.
- Fix some style(9) violations.
Reviewed by: brooks (mentor)
Approved by: dim (mentor)
to a deadlock of an association when an IPv6 socket was used to
communcate with IPv4 and an ICMPv4 fragmentation needed message
was received.
While there, simplify the code a bit.
MFC after: 3 days.
MOD_SHUTDOWN is not an end of existence, and there is a life after it.
In particular, code previously called on MOD_SHUTDOWN grabbed lock and
deallocated unit numbering. That caused infinite wait loop if snd_uaudio
tried to destroy its PCM device after that point.
MFC after: 3 days
through by VMware so blacklist their PCI-PCI bridge for MSI/MSI-X here.
Note that besides currently there not being a quirk type that disables
MSI-X only and there's no evidence that MSI doesn't work with the VMware
pass-through, it's really questionable whether MSI generally works in
that setup as VMware only mention three know working devices [1, p. 4].
Also not that this quirk entry currently doesn't affect the devices
emulated by VMware in any way as these don't claim support MSI/MSI-X to
begin with. [2]
While at it, make the PCI quirk table const and static.
- Remove some duplicated empty lines.
- Use DEVMETHOD_END.
PR: 163812, http://forums.freebsd.org/showthread.php?t=27899 [2]
Reviewed by: jhb
MFC after: 3 days
txsync() and rxsync() callbacks, removing some variables made
useless by this change;
- add generic lock and irq handling routines. These can be useful
in case there are no driver locks that we can reuse;
- add a few macros to reduce differences with the Linux version.
Some older firmware versions have issues that can be worked around by
avoiding certain operations. Add a sysctl dev.aac.#.firmware_build to
make it easy for scripts or userland tools to detect the firmware
version.
* Change the mesh IE size to be IEEE80211_MESH_CONF_SZ rather than the
size of the structure;
* conf_cap is now a uint8_t rather than a uint16_t (uint16_t in D3.0,
uint8_t in the amendment spec);
* Update mesh config capability bits - earlier bits were from draft X,
current is amendment spec;
* Update the following to be an enum rather than #define and added
a VENDOR entry too from the amendment spec;
IEEE80211_MESHCONF_PATH_*
IEEE80211_MESHCONF_METRIC_*
IEEE80211_MESHCONF_CC_*
IEEE80211_MESHCONF_SYNC_*
IEEE80211_MESHCONF_AUTH_*
* Kept IEEE80211_MESHCONF_FORM_* and IEEE80211_MESHCONF_CAP_* as
defines because they are defined in a way that we need to mask in/out
information;
* In IEEE80211_MESHCONF_CAP_* IEEE80211_MESHCONF_CAP_TBTTA is removed
and 0x80 is made reserved as defined in the amendment spec.
Submitted by: monthadar@gmail.com
Reviewed by: rpaulo
When performing a firmware upgrade via atacontrol[1] the subsequent
command may time out producing the error message above. When this
happens the callout could still be active, and the system would then
panic due to a destroyed semaphore.
Instead, ensure that the callout is done first, via callout_drain.
Note that this fix applies to the "old" ata(4) and so isn't applicable
to the default configuration in HEAD. It is still applicable to
stable/8.
[1] http://lists.freebsd.org/pipermail/freebsd-current/2012-January/031122.html
Submitted by: Nima Misaghian
Reviewed by: rstone, attilio, mav
Obtained from: SVOS
MFC after: 3 days
There are unfortunately a number of situations where vap->iv_bss is changed
or freed by some code in net80211. Because multiple threads can concurrently
be doing work (and the vap->iv_bss access isn't at all done behind any kind
of lock), it's quite possible that:
* a change will occur in one thread - eg, by a call through
ieee80211_sta_join1();
* a state change occurs in another thread - eg an RX is scheduled
in the ath tasklet and it calls ieee80211_input_mimo_all(), which
does dereference vap->iv_bss;
* these two executing concurrently, causing things to explode.
Another instance is ath_beacon_alloc() which takes an ieee80211_node *.
It's called with the vap->iv_bss node from ath_newstate(). If the node has
changed in the meantime (say it's been freed elsewhere) the reference
that it grabbed _before_ refcounting it may be stale.
I would _prefer_ that these sorts of things were serialised somewhere but
that may be a bit much to ask. Instead, the best we can (currently) hope
is that the underlying bss node is still (somewhat) valid.
There is a related PR (kern/164382) described by the first case above.
That should be fixed by properly serialising the RX path and reset path
so an RX can't occur at the same time as the vap free/shutdown path.
This is inspired by some related fixes in r212127.
PR: kern/165060
for a shared mapping and marking the entry for inheritance.
Other thread might execute vmspace_fork() in between (e.g. by fork(2)),
resulting in the mapping becoming private.
Noted and reviewed by: alc
MFC after: 1 week
be the same chip):
- The I/O port resource may not be available with these. However, given
that we actually only need this resource for some controllers that
require their firmware to be up- and downloaded (which excludes the
SAS1078{,DE}) just handle failure to allocate this resource gracefully
when possible. While at it, generally put non-fatal resource allocation
failures under bootverbose.
- SAS1078{,DE} use a different hard reset protocol.
- Add workarounds for the 36GB physical address limitation of scatter/
gather elements of these controllers.
Tested by: Slawa Olhovchenkov
PR: 149220 (remaining part)
on extended and extensible structs if_msghdrl and ifa_msghdrl. This
will allow us to extend both the msghdrl structs and eventually if_data
in the future without breaking the ABI.
Bump __FreeBSD_version to allow ports to more easily detect the new API.
Reviewed by: glebius, brooks
MFC after: 3 days
both 64bit and 32bit binaries, not for 64bit only.
The set of the flag is not neccessary there, because the only current
user of the cpu_set_user_tls() is create_thread(), which calls
cpu_set_upcall() before and cpu_set_upcall() itself sets PCB_FULL_IRET.
Change the function for consistency and preserve existing KPI for now.
MFC after: 1 week
