just use _foo() <-- foo(). In the case of a libpthread that doesn't do
call conversion (such as linuxthreads and our upcoming libpthread), this
is adequate. In the case of libc_r, we still need three names, which are
now _thread_sys_foo() <-- _foo() <-- foo().
Convert all internal libc usage of: aio_suspend(), close(), fsync(), msync(),
nanosleep(), open(), fcntl(), read(), and write() to _foo() instead of foo().
Remove all internal libc usage of: creat(), pause(), sleep(), system(),
tcdrain(), wait(), and waitpid().
Make thread cancellation fully POSIX-compliant.
Suggested by: deischen
are not supported by this implementation, and the error return values
from sem_init(), sem_open(), sem_close(), and sem_unlink() reflect this.
Approved by: jkh
signal handler. Explicitly check for jumps to anywhere other than the
current stack, since such jumps are undefined according to POSIX.
While we're at it, convert thread cancellation to use continuations, since
it's cleaner than the original cancellation code.
Avoid delivering a signal to a thread twice. This was a pre-existing bug,
but was likely unexposed until these other changes were made.
Defer signals generated by pthread_kill() so that they can be delivered on
the appropriate stack. deischen claims that this is unnecessary, which is
likely true, but without this change, pthread_kill() can cause undefined
priority queue states and/or PANICs in [sig|_]longjmp(), so I'm leaving
this in for now. To compile this code out and exercise the bug, define
the _NO_UNDISPATCH cpp macro. Defining _PTHREADS_INVARIANTS as well will
cause earlier crashes.
PR: kern/14685
Collaboration with: deischen
the case that a CPU hungry main thread is prevented from being preempted
due to a negative calculation of its time slice.
Reported by: Alexander Litvin <archer@lucky.net>
the initial thread). Instead, just leave an unmapped gap between thread
stacks and make sure that the thread stacks won't grow into these gaps,
simply by limiting the size of the stacks with the 'len' argument to
mmap(). This (if I understand correctly) reduces VM overhead
considerably.
Reviewed by: deischen
handler. Thread-to-thread signals (pthread_signal) are treated differently
than process signals; a pthread_signal can wakeup a blocked thread if
a signal handler is not installed for that signal.
Found by: ACE tests
o Cancellation flags were not getting properly set/cleared.
o Loops waiting for internal locks were not being exited
correctly by a cancelled thread.
o Minor spelling (cancelation -> cancellation) and formatting
corrections (missing tab).
Found by: tg
Reviewed by: jasone
o Don't call signal handlers with the signal handler access lock
held.
o Remove pending signals before calling signal handlers. If
pending signals were not removed prior to handling them,
invocation of the handler could cause the handler to be
called more than once for the same signal. Found by: JB
o When SIGCHLD arrives, wake up all threads in PS_WAIT_WAIT
(wait4).
PR: bin/15328
Reviewed by: jasone
Before this change, a signal was delivered to each thread that
didn't have the signal masked. Signals also improperly woke up
threads waiting on I/O. With this change, signals are now
handled in the following way:
o If a thread is waiting in a sigwait for the signal,
then the thread is woken up.
o If no threads are sigwait'ing on the signal and a
thread is in a sigsuspend waiting for the signal,
then the thread is woken up.
o In the case that no threads are waiting or suspended
on the signal, then the signal is delivered to the
first thread we find that has the signal unmasked.
o If no threads are waiting or suspended on the signal,
and no threads have the signal unmasked, then the signal
is added to the process wide pending signal set. The
signal will be delivered to the first thread that unmasks
the signal.
If there is an installed signal handler, it is only invoked
if the chosen thread was not in a sigwait.
In the case that multiple threads are waiting or suspended
on a signal, or multiple threads have the signal unmasked,
we wake up/deliver the signal to the first thread we find.
The above rules still apply.
Reported by: Scott Hess <scott@avantgo.com>
Reviewed by: jb, jasone
to use mmap(..., MAP_STACK, ...) on alpha too since that should work
now.
* Add hooks to allow GDB to access the internals of pthreads without
having to know the exact layout of struct pthread.
Reviewed by: deischen
eischen (Daniel Eischen) added wrappers to protect against cancled
threads orphaning internal resources.
the cancelability code is still a bit fuzzy but works for test
programs of my own, OpenBSD's and some examples from ORA's books.
add readdir_r to both libc and libc_r
add some 'const' attributes to function parameters
Reviewed by: eischen, jasone
-----------------------------
Most of the userland changes are in libc. For both the alpha
and the i386 setjmp has been changed to accomodate for the
new sigset_t. Internally, libc is mostly rewritten to use the
new syscalls. The exception is in compat-43/sigcompat.c
The POSIX thread library has also been rewritten to use the
new sigset_t. Except, that it currently only handles NSIG
signals instead of the maximum _SIG_MAXSIG. This should not
be a problem because current applications don't use any
signals higher than NSIG.
There are version bumps for the following libraries:
libdialog
libreadline
libc
libc_r
libedit
libftpio
libss
These libraries either a) have one of the modified structures
visible in the interface, or b) use sigset_t internally and
may cause breakage if new binaries are used against libraries
that don't have the sigset_t change. This not an immediate
issue, but will be as soon as applications start using the
new range to its fullest.
NOTE: libncurses already had an version bump and has not been
given one now.
NOTE: doscmd is a real casualty and has been disconnected for
the moment. Reconnection will eventually happen after
doscmd has been fixed. I'm aware that being the last one
to touch it, I'm automaticly promoted to being maintainer.
According to good taste this means that I will receive a
badge which either will be glued or mechanically stapled,
drilled or otherwise violently forced onto me :-)
NOTE: pcvt/vttest cannot be compiled with -traditional. The
change cause sys/types to be included along the way which
contains the const and volatile modifiers. I don't consider
this a solution, but more a workaround.
might have been mmapped, and if so, passing the pointer to free() is
really not a good idea.
[ In the next millenium, when I've taken over the world, I'm going
to ban 8 character tabs. You've been warned. ]
track.
The $Id$ line is normally at the bottom of the main comment block in the
man page, separated from the rest of the manpage by an empty comment,
like so;
.\" $Id$
.\"
If the immediately preceding comment is a @(#) format ID marker than the
the $Id$ will line up underneath it with no intervening blank lines.
Otherwise, an additional blank line is inserted.
Approved by: bde
Always use mmap() for default-size stack allocation. Use MAP_ANON instead
of MAP_STACK on the alpha architecture.
Reduce the amount of code executed while owning _gc_mutex during stack
allocation.
Cache discarded default thread stacks for use in subsequent thread creations.
Create a red zone at the end of each stack (including the initial thread
stack), with the hope of causing a segfault if a stack overflows.
To activate these modifications, add -D_PTHREAD_GSTACK to CFLAGS in
src/lib/libc_r/Makefile. Since the modifications depend on the VM_STACK
kernel option, I'm not sure how to safely use growable stacks by default.
Testing, as well as algorithmic and stylistic comments are welcome.
o The polling mechanism for I/O readiness was changed from
select() to poll(). In additon, a wrapped version of poll()
is now provided.
o The wrapped select routine now converts each fd_set to a
poll array so that the thread scheduler doesn't have to
perform a bitwise search for selected fds each time file
descriptors are polled for I/O readiness.
o The thread scheduler was modified to use a new queue (_workq)
for threads that need work. Threads waiting for I/O readiness
and spinblocks are added to the work queue in addition to the
waiting queue. This reduces the time spent forming/searching
the array of file descriptors being polled.
o The waiting queue (_waitingq) is now maintained in order of
thread wakeup time. This allows the thread scheduler to
find the nearest wakeup time by looking at the first thread
in the queue instead of searching the entire queue.
o Removed file descriptor locking for select/poll routines. An
application should not rely on the threads library for providing
this locking; if necessary, the application should use mutexes
to protect selecting/polling of file descriptors.
o Retrieve and use the kernel clock rate/resolution at startup
instead of hardcoding the clock resolution to 10 msec (tested
with kernel running at 1000 HZ).
o All queues have been changed to use queue.h macros. These
include the queues of all threads, dead threads, and threads
waiting for file descriptor locks.
o Added reinitialization of the GC mutex and condition variable
after a fork. Also prevented reallocation of the ready queue
after a fork.
o Prevented the wrapped close routine from closing the thread
kernel pipes.
o Initialized file descriptor table for stdio entries at thread
init.
o Provided additional flags to indicate to what queues threads
belong.
o Moved TAILQ initialization for statically allocated mutex and
condition variables to after the spinlock.
o Added dispatching of signals to pthread_kill. Removing the
dispatching of signals from thread activation broke sigsuspend
when pthread_kill was used to send a signal to a thread.
o Temporarily set the state of a thread to PS_SUSPENDED when it
is first created and placed in the list of threads so that it
will not be accidentally scheduled before becoming a member
of one of the scheduling queues.
o Change the signal handler to queue signals to the thread kernel
pipe if the scheduling queues are protected. When scheduling
queues are unprotected, signals are then dequeued and handled.
o Ensured that all installed signal handlers block the scheduling
signal and that the scheduling signal handler blocks all
other signals. This ensures that the signal handler is only
interruptible for and by non-scheduling signals. An atomic
lock is used to decide which instance of the signal handler
will handle pending signals.
o Removed _lock_thread_list and _unlock_thread_list as they are
no longer used to protect the thread list.
o Added missing RCS IDs to modified files.
o Added checks for appropriate queue membership and activity when
adding, removing, and searching the scheduling queues. These
checks add very little overhead and are enabled when compiled
with _PTHREADS_INVARIANTS defined. Suggested and implemented
by Tor Egge with some modification by me.
o Close a race condition in uthread_close. (Tor Egge)
o Protect the scheduling queues while modifying them in
pthread_cond_signal and _thread_fd_unlock. (Tor Egge)
o Ensure that when a thread gets a mutex, the mutex is on that
threads list of owned mutexes. (Tor Egge)
o Set the kernel-in-scheduler flag in _thread_kern_sched_state
and _thread_kern_sched_state_unlock to prevent a scheduling
signal from calling the scheduler again. (Tor Egge)
o Don't use TAILQ_FOREACH macro while searching the waiting
queue for threads in a sigwait state, because a change of
state destroys the TAILQ link. It is actually safe to do
so, though, because once a sigwaiting thread is found, the
loop ends and the function returns. (Tor Egge)
o When dispatching signals to threads, make the thread inherit
the signal deferral flag of the currently running thread.
(Tor Egge)
Submitted by: Daniel Eischen <eischen@vigrid.com> and
Tor Egge <Tor.Egge@fast.no>
