provide PCI devices for various hardware such as memory controllers, etc.
These PCI buses are not enumerated via ACPI however. Add qpi(4) psuedo
bus and Host-PCI bridge drivers to enumerate these buses. Currently the
driver uses the CPU ID to determine the bridges' presence.
In collaboration with: Joseph Golio @ Isilon Systems
MFC after: 2 weeks
rather than forging ahead and interpreting garbage buffer content
and dirent structures.
This change backs out r211684 which was essentially a no-op.
MFC after: 1 week
- Use timer 7 in XLR PIC as a 32 counter
- provide pic_init_timer(), pic_set_timer(), pic_timer_count32() and
pic_timer_count() PIC timer operations.
- register this timer as platform_timecounter on rmi platform.
- style(9) fixes to mips/rmi platform files
- update pic.h to add pic_setup_intr() and use pic_setup_intr() for setting
up interrupts which are routed thru PIC.
- remove rmi_spin_mutex_safe and haslock, and make sure that the functions
are called only after mutexes are available.
- move PIC code to xlr_machdep.c
- move fast message ring code completely to on_chip.c
- move memory initialization to a new function xlr_mem_init()
- style fixes
ID, plus the ability to force '16-bit mode' which really means NE-2000
mode. Other open source drivers suggest that the Holtek misbehaves if
you allow the 8-bit probe. Also, all of the PCI chips emulate
NE-2000ish cards, so always force 16-bit mode for memory transfers.
PR: 84202 (patch not used)
succeeded and a subsequent interation failed to find an
entry to prune, it could loop infinitely, since the
"freed" variable wasn't reset to FALSE. This patch moves
setting freed FALSE to inside the loop to fix the problem.
Tested by: alan.bryan at yahoo.com
MFC after: 2 weeks
I'm not sure whether adding this logical id is correct or not
because Compex RL2000 is in the list of supported hardware list.
I guess the Compex RL2000 could be PCI variant while the controller
in question is ISA controller. It seems PNP compat id didn't match
or it had multiple compat ids so isa_pnp_probe() seemed to return
ENOENT.
PR: kern/80853
resetting needfree
needfree is checked at the very start of arc_reclaim_needed.
This change makes code easier to follow and maintain in face of
potential changed in arc_reclaim_needed.
Also, put the whole sub-block under _KERNEL because needfree can be set
only in kernel code.
To do: rename needfree to something else to aovid confusion with
OpenSolaris global variable of the same name which is used in the same
code, but has different meaning (page deficit).
Note: I have an impression that locking around accesses to this variable
as well as mutual notifications between arc_reclaim_thread and
arc_lowmem are not proper.
MFC after: 1 week
Clang to compile this file: it was using the builtin memcpy and we want
to use the memcpy defined in gptboot.c. (Clang can't compile boot2 yet).
Submitted by: Dimitry Andric <dimitry at andric.com>
Reviewed by: jhb
standard kill(). On other systems, SI_LWP is generated by lwp_kill().
This will allow conforming applications to differentiate between
signals generated by standard events and those generated by other
implementation events in a manner compatible with existing practice.
- Bump __FreeBSD_version
support WOL. Some controllers require additional 3-wire auxiliary
remote wakeup connector to draw power. More recent xl(4)
controllers may not need the wakeup connector though.
initialize controller from a known good state. Previously driver
used to issue controller reset while TX/RX DMA are in progress.
I guess resetting controller in active TX/RX DMA cycle is to ensure
stopping I/Os in xl_shutdown(). I remember some buggy controllers
didn't respond with stop command if controller is under high
network load at the time of shutdown so resetting controller was
the only safe way to stop the I/Os. However, from my experiments,
controller always responded with stop command under high network
load so I think it's okay to remove the xl_reset() in
device_shutdown handler.
Resetting controller also will clear configured RX filter which
in turn will make WOL support hard because driver have to reprogram
RX filter in WOL handler as well as setting station address.
Use MACHINE_CPUARCH in preference to MACHINE_ARCH. The former is the
source code location of the machine, the latter the binary output. In
general, we want to use MACHINE_CPUARCH instead of MACHINE_ARCH unless
we're tesitng for a specific target. The isn't even moot for
i386/amd64 where there's momemntum towards a MACHINE_CPUARCH == x86,
although a specific cleanup for that likely would be needed...
the uio_offset adjustment instead to calculate a correct *len.
Without this change, we run off the end of the directory data
we're reading and panic horribly for nfs filesystems.
MFC after: 1 week
