* This makes it a bit easier to factor out common parts for e.g. the
7000 chipset family.
* Add iwm7265d config, and recognize the 7265D chipset variant via the
hardware revision.
Tested:
* 7260, STA mode (2ghz)
Obtained from: Dragonflybsd commit cc8d6ccf5583fd45964f3bde9b057ee4f834c0e0
* sc->sc_nvm becomes sc->nvm_data and is now a pointer instead of an
inlined struct.
* Add sc->eeprom_size and sc->nvm_hw_section_num configuration values to
struct iwm_softc.
* For now continue to avoid negative error return-values, and use pointer
variables for some return values, as before.
* Continue to omit LAR (location aware regulatory) related code as well.
Tested:
* Intel 7260, STA mode (2GHz)
Obtained from: dragonflybsd commit 39f8331b1a6f295291e08c377da12a8e7a5436c0
The tty layer uses tsw_busy to poll for busy/idle status of the transmitter
hardware during close() and tcdrain(). The ucom layer defines ULSR_TXRDY and
ULSR_TSRE bits for the line status register; when both are set, the
transmitter is idle. Not all chip drivers maintain those bits in the sc_lsr
field, and if the bits never get set the transmitter will always appear
busy, causing hangs in tcdrain().
These changes add a new sc_flag bit, UCOM_FLAG_LSRTXIDLE. When this flag is
set, ucom_busy() uses the lsr bits to return busy vs. idle state, otherwise
it always returns idle (which is effectively what happened before this
change because tsw_busy wasn't implemented).
For the uftdi chip driver, these changes stop masking out the tx idle bits
when processing the status register (because now they're useful), and it
calls ucom_use_lsr_txbits() to indicate the bits are maintained by the
driver and can be used by ucom_busy().
Differential Revision: https://reviews.freebsd.org/D9183
As of r313097, the HotPlug code requires the link to support
reporting of the data-link status. Remove tests for this capability
from code that can now assume its presence.
Suggested by: jhb
Reviewed by: jhb
MFC after: 3 days
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9431
Some PCI-e bridges report that they support HotPlug in the slot
capabilities but do not report support for Data Layer Active events
in the link capabilities register. These bridges do not work correctly
when HotPlug is used. Further, while the description of HotPlug in
the spec does not mention that DL active events are required, the
description of the link capabilities register says that DL active is
required for HotPlug. Thanks to Dave Baukus for finding that language
in the spec.
PR: 211699
Submitted by: Dave Baukus <daveb@spectralogic.com>
Reviewed by: vangyzen
MFC after: 3 days
Commit r312743 ("Use SoC ID - based detection in CESA") resulted
in build failing for Marvell armv5 platforms, which don't support
the newer version of CESA controller. This patch provides a fix by
removing ifdefs around bitfields' definitions, so that they are
known to all platforms.
Submitted by: Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
- Check for Chelsio vendor ID in probe routines.
- Fail attach instead of faulting if pci_find_dbsf() doesn't find a
device.
PR: 216539
Reported by: asomers
Tested by: Dave Baukus <daveb@spectralogic.com>
MFC after: 3 days
Sponsored by: Chelsio Communications
structure:
if_gethwtsomax(), if_sethwtsomax() - if_hw_tsomax
if_gethwtsomaxsegcount(), if_sethwtsomaxsegcount() - if_hw_tsomaxsegcount
if_gethwtsomaxsegsize(), if_sethwtsomaxsegsize() - if_hw_tsomaxsegsize
Update em and vnic drivers which had already been coverted to use accessor
functions for the other ifnet structure members.
Reviewed by: erj
Approved by: sjg (mentor)
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D8544
Thought it's difficult to reproduce, I think this variable was responsible
for a use-after-free panic when a SATA disk timed out responding to a SATA
identify command during boot.
Submitted by: slm
Reviewed by: slm
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9364
Clang complains about the shift of (1 << 7) into a int8_t changing the value:
warning: implicit conversion from 'int' to 'int8_t' (aka 'signed char') changes
value from 128 to -128 [-Wconstant-conversion]
Squash this warning by forcing clang to see it as an unsigned bit.
This seems odd, given that it's still a conversion of 128->-128, but I'm
guessing the explicit unsigned attribute notifies clang that sign really doesn't
matter in this case.
Reported by: Mark Millard <markmi AT dsl-only DOT net>
MFC after: 2 weeks
driver to support exposing a GEOM device, which can be used to mount
Avalon-attached ROMs, reserved areas of DRAM, etc, as a filesystem:
commit 9deb1e60eaaaf7a3687e48c58af5efd756f32ec6
Author: Robert N. M. Watson <robert.watson@cl.cam.ac.uk>
Date: Sat Mar 5 20:33:12 2016 +0000
Use format strings with make_dev(9) in avgen(4).
commit 0bf2176c23e7425bfa042c08a24f8a25fe6d8885
Author: Robert N. M. Watson <robert.watson@cl.cam.ac.uk>
Date: Tue Mar 1 10:23:23 2016 +0000
Implement a new "geomio" configuration argument to altera_avgen(4),
the generic I/O device we attach to various BERI peripherals. The new
option requests that, instead of exposing the underlying device via a
special device node in /dev, it instead be exposed via geom(4),
allowing it to be used with filesystems. The current implementation
does not allow a device to be exposed both for file/mmap and geom, so
one of the two models must be selected when configuring it via FDT or
device.hints. A typical use of the new option will be:
sri-cambridge,geomio = "rw";
MFC after: 1 week
Sponsored by: DARPA, AFRL
CheriBSD, which attempt to work around an inherent race in the UART's
control-register design in detecting whether JTAG is currently,
present, which will otherwise lead to moderately frequent output
drops when running in polled rather than interrupt-driven operation.
Now, these drops are quite infrequent.
commit 9f33fddac9215e32781a4f016ba17eab804fb6d4
Author: Robert N. M. Watson <robert.watson@cl.cam.ac.uk>
Date: Thu Jul 16 17:34:12 2015 +0000
Add a new sysctl, hw.altera_jtag_uart.ac_poll_delay, which allows the
(default 10ms) delay associated with a full JTAG UART buffer combined
with a lack of a JTAG-present flag to be tuned. Setting this higher
may cause some JTAG configurations to be more reliable when printing
out low-level console output at a speed greater than the JTAG UART is
willing to carry data. Or it may not.
commit 73992ef7607738b2973736e409ccd644b30eadba
Author: Robert N. M. Watson <robert.watson@cl.cam.ac.uk>
Date: Sun Jan 1 15:13:07 2017 +0000
Minor improvements to the Altera JTAG UART device driver:
- Minor rework to the logic to detect JTAG presence in order to be a bit
more resilient to inevitable races: increase the retry period from two
seconds to four seconds for trying to find JTAG, and more agressively
clear the miss counter if JTAG has been reconnected. Once JTAG has
vanished, stop prodding the miss counter.
- Do a bit of reworking of the output code to frob the control register
less by checking whether write interrupts are enabled/disabled before
changing their state. This should reduce the opportunity for races
with JTAG discovery (which are inherent to the Altera
hardware-software interface, but can at least be minimised).
- Add statistics relating to interrupt enable/disable/JTAG
discovery/etc.
With these changes, polled-mode JTAG UART ttys appear substantially
more robust.
MFC after: 1 week
Sponsored by: DARPA, AFRL
undo_offload_socket() is only called by t4_connect() during a connection
setup failure, but t4_connect() still owns the TOE PCB and frees ita
after undo_offload_socket() returns. Release a reference in
undo_offload_socket() resulted in a double-free which panicked when
t4_connect() performed the second free. The reference release was
added to undo_offload_socket() incorrectly in r299210.
MFC after: 1 week
Sponsored by: Chelsio Communications
The intended use is to annotate frequently used globals which either rarely
change (and thus can be grouped in the same cacheline) or are an atomic counter
(which means it may benefit from being the only variable in the cacheline).
Linker script support is provided only for amd64. Architectures without it risk
having other variables put in, i.e. as if they were not annotated. This is
harmless from correctness point of view.
Reviewed by: bde (previous version)
MFC after: 1 month
Recent changes in the pseudo header accessor prototypes start to
use common code RxQ handle on datapath. The handle was located
at the end of the structure with members not used on datapath.
Reviewed by: philip
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D9359
TxQ is destroyed on stop and last used tag should be reset to default 0
on the next start.
Reviewed by: philip
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D9358
The MLX5 driver has four different types of DMA allocations which are
now allocated using busdma:
1) The 4K firmware DMA-able blocks. One busdma object per 4K allocation.
2) Data for firmware commands use the 4K firmware blocks split into four 1K blocks.
3) The 4K firmware blocks are also used for doorbell pages.
4) The RQ-, SQ- and CQ- DMA rings. One busdma object per allocation.
After this patch the mlx5en driver can be used with DMAR enabled in
the FreeBSD kernel.
MFC after: 1 week
Sponsored by: Mellanox Technologies
- When device disappears from PCI indicate error device state and:
1) Trigger command completion for all pending commands
2) Prevent new commands from executing and return:
- success for modify and remove/cleanup commands
- failure for create/query commands
3) When reclaiming pages for a device in error state don't ask FW to
return all given pages, just release the allocated memory
MFC after: 1 week
Sponsored by: Mellanox Technologies
PCI device(s), changes:
- alloc_entry() now clears bit for page slot entry aswell
- update of cmd->ent_arr[] is now under cmd->alloc_lock
- complete command if alloc_entry() fails
MFC after: 1 week
Sponsored by: Mellanox Technologies
