* This makes it a bit easier to factor out common parts for e.g. the
7000 chipset family.
* Add iwm7265d config, and recognize the 7265D chipset variant via the
hardware revision.
Tested:
* 7260, STA mode (2ghz)
Obtained from: Dragonflybsd commit cc8d6ccf5583fd45964f3bde9b057ee4f834c0e0
* sc->sc_nvm becomes sc->nvm_data and is now a pointer instead of an
inlined struct.
* Add sc->eeprom_size and sc->nvm_hw_section_num configuration values to
struct iwm_softc.
* For now continue to avoid negative error return-values, and use pointer
variables for some return values, as before.
* Continue to omit LAR (location aware regulatory) related code as well.
Tested:
* Intel 7260, STA mode (2GHz)
Obtained from: dragonflybsd commit 39f8331b1a6f295291e08c377da12a8e7a5436c0
This fixes an error handling detail in iwm_nvm_read_chunk(), where an
error response from the firmware for an NVM read shouldn't be fatal if
the offset was non-zero.
Approved by: adrian (mentor)
Obtained from: DragonFlyBSD git 250a1c33fca1725121fe499f9cebc90267d209f9
Differential Revision: https://reviews.freebsd.org/D8542
before calling ieee80211_ifattach() so the taskqueue hasn't been
initialized. Don't try to drain it, we'll panic.
Looks like this issue was introduced in r303326.
Reviewed by: avos, sbruno, adrian
Differential Revision: https://reviews.freebsd.org/D8499
* Starting a scan from wpa_supplicant or via ifconfig while associated,
should no longer cause firmware panics or abort early.
Tested:
* AC7260, STA mode
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D8412
* SYNC_RESP_STRUCT and SYNC_RESP_PTR originate from the OpenBSD version of
iwm, and they weren't serving any real purpose in the FreeBSD port.
* We just do a single bus_dmamap_sync for syncing the complete received frame,
instead of explicitly bus_dmamap_sync-ing subranges of the frame like in
the OpenBSD iwm code.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7939
to ieee80211_add_rx_params() + drop last (ieee80211_rx_stats) parameter
Note: there is an additional check for ieee80211_get_rx_params()
return value (which does not exist in the original diff).
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D8207
There are a variety of more interesting RX statistics that we should
keep track of but we don't. This is a starting point for adding more
information.
Specifically:
* now the RX rate information and some of the packet status is
passed up;
* The 32 bit or 64 bit TSF is passed up;
* the PHY mode is passed up;
* the "I'm decap'ed AMSDU!" state is passed up;
* number of RX chains is bumped to 4.
This is all mostly a placeholder for getting the data into the RX status
before we pass it up to net80211 - unfortunately we don't yet enforce
that drivers provide it, nor do we pass the provided info back up the
stack so anyone can use the data.
We're going to need to use some of this data moving forward.
Notably, now that some hardware can do AMSDU decap for us (the intel iwm
driver can do it when we flip it on; the ath10k port I'm doing does
it for us) then we need to pass it up through the stack so the duplicate
RX sequence numbers and crypto/IV details don't cause the packet to
be dropped and/or counted against a replay counter.
It's also the beginning of being able to do more interesting node
accounting in net80211. Specifically, once drivers start populating
per-packet rate information, AMPDU information, timestamps, etc,
we can start providing histograms of rate-versus-RSSI, account
for receive time spent per node and other such interesting things.
(Note: I'm also hoping to include ranging and RTT information for
future chipset support; and it's likely going to include it in
this kind of fashion.)
Replace various void * / int argument combinations with common structures:
- ieee80211_ratectl_tx_status for *_tx_complete();
- ieee80211_ratectl_tx_stats for *_tx_update();
While here, improve amrr_tx_update() for a bit:
1. In case, if receiver is not known (typical for Ralink USB drivers),
refresh Tx rate for all nodes on the interface.
2. There was a misuse:
- otus(4) sends non-decreasing counters (as originally intended);
- but ural(4), rum(4) and run(4) are using 'read & clear' registers
to obtain statistics for some period of time (and those 'last period'
values are used as arguments for tx_update()). If arguments are not big
enough, they are just discarded after the next call.
Fix: move counting into *_tx_update()
(now otus(4) will zero out all node counters after every tx_update() call)
Tested with:
- Intel 3945BG (wpi(4)), STA mode.
- WUSB54GC (rum(4)), STA / HOSTAP mode.
- RTL8188EU (urtwn(4)), STA mode.
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D8037
* Don't do the antenna switching when setting up the rate table - we don't
take into account whether it's an active antenna or not (eg shared with BT.)
I'll look into this a bit more later.
* The default antenna is still 1, I'll look into that a bit more later.
(So no, this doesn't fix it for Larry who needs ANT_B to be active, not
ANT_A.)
* My changes to the rate control setup used the wrong method for finding
a suitable rate, which led to 1M CCK frames being queued for 11a operation.
This is .. sub-optimal. Change the rate control lookup path to use
the global table instead of the per-node table, which won't be setup
until the node rate table is setup (which happens way too late in this
game.)
Tested:
* Intel 7260, 2G and 5G operation.
This changes the transmit rate control code to do a few things:
* use fixed rates (mcast, ucast, mgmt) where required.
* Don't use a hard-coded 11a or 11bg rate for non-data frames -
use what net80211 says we should use.
* use mgmtrate for EAPOL frames.
Reviewed by: avos
Differential Revision: https://reviews.freebsd.org/D7994
* We need to first call ivp->iv_newstate(), to enqueue the deauth/deassoc
mgmt frame, then flush the tx queue, before actually calling
iwm_release().
* cycling a wlan connection via wpa_cli frontend to wpa_supplicant, by
issuing disconnect and reconnect commandos works quite well.
(There is still an issue when disconnecting/reconnecting too quickly)
* Reassociating or roaming via wpa_supplicant is still broken.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7943
* No functional change, none of these values were ever read.
* The values removed from struct iwm_nvm_data are only used for old dvm
devices in Linux iwlwifi, and irrelevant to iwm hence.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7945
* This removes deprecated scan API definitions, which have been unused
since the upgrade to version 16 firmware in change r303327.
* Part of this change matches the header-file changes in Linux git commit
1f9403863c080478ad78247c89b018e95bdfb027.
* No functional change.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7937
The iwm(4) iwm_poll_bit() function returns 1 on success, and 0 on failure,
whereas the iwl_poll_bit() in Linux iwlwifi returns < 0 on failure.
So the (ret < 0) check ended up ignoring any error returned by
iwm_poll_bit().
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7932
This fixes a potential buffer overrun in the firmware parsing code.
Reported by: Coverity
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7931
The wantresp field in struct iwm_rx_data has never been used for anything,
so we can just delete it.
Apparently struct iwm_sf_cfg_cmd was compiled correctly (using a 32bit
value to represent the enum), but it still seems like a very bad idea to use
an enum type in a __packed struct.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7930
The htole32 was working fine for little-endian machines, but would have
been broken on big-endian.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7929
* hard code a noise floor of -96 for now. The noise floor update code returns
some "interesting" values that I can't map to anything useful right now.
* Ensure a default noise floor is set - otherwise the initial scan results
have a noise floor of '0'.
* Fix up the RSSI calculation to be correctly relative to the noise floor.
The RSSI routines return an absolute value in dBm - so fix this up.
* Cap RSSI values appropriately.
* Ensure we pass in a 1/2 dB unit value in to net80211.
Tested:
* Intel 7260, STA mode
iwm0: <Intel Dual Band Wireless AC 7260> mem 0xf1400000-0xf1401fff irq 17 at device 0.0 on pci2
iwm0: hw rev 0x140, fw ver 16.242414.0, address xx:xx:xx:xx:xx:xx
* iwm_poll_bit() returns 1 on success and 0 on failure, whereas
iwl_poll_bit() in Linux's iwlwifi returns >= 0 on success and < 0 on
failure.
* Because of the wrong iwm_poll_bit return code check, no warning was
printed if tx DMA stopping failed.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7371
* Makes the TX DMA stopping more similar to Linux code, and potentially
a bit faster. Also, output an error message when TX DMA idling fails.
Taken-From: Linux iwlwifi
Tested:
* AC3165, STA mode
Approved by: adrian (mentor)
Obtained from: DragonFlyBSD git 2ee486ddff973ac552ff787c17e8d83e8ae0f24c
Differential Revision: https://reviews.freebsd.org/D7325
When building a Tx Command for management frames, we are lacking
a check for action frames, for which we should set a different
pm_timeout. This cause the fw to stay awake for 100TU after each
such frame is transmitted, resulting an excessive power consumption.
Taken-From: Linux iwlwifi (git b084a35663c3f1f7)
Approved by: adrian (mentor)
Obtained from: Linux git b084a35663c3f1f7de1c45c4ae3006864c940fe7
Obtained from: DragonFlyBSD git ba00f0e3ae873d6f0d5743e22c3ebc49c44dfdac
Differential Revision: https://reviews.freebsd.org/D7324
The PROT_REQUIRE flag in should be set for data frames above a certain
length, but we were setting it for !data frames above a certain length,
which makes no sense at all.
Taken-From: OpenBSD, Linux iwlwifi
Approved by: adrian (mentor)
Obtained from: DragonFlyBSD git 8cc03924a36c572c2908e659e624f44636dc2b33
Differential Revision: https://reviews.freebsd.org/D7323
We also need to consider the size of large firmware commands in iwm_alloc_tx_ring(),
in the dma tag creation, when qid == IWM_MVM_CMD_QUEUE. The old code apparently
only allocated a 2KB (MCLBYTES) sized buffer when it actually expected 4KB.
Submitted by: Imre Vadasz <imre@vdsz.com>
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D6824
(Together with other iwm(4) memory leak fixes) Memory leakage in M_DEVBUF
is now at ca. 2KB for each iwm(4) module load/unload cycle.
Submitted by: Imre Vadasz <imre@vdsz.com>
Approved by: re (gjb)
Obtained from: DragonflyBSD git eaf551a1d464c643e98ce5781971dd32124e9af1
Differential Revision: https://reviews.freebsd.org/D6819
* When bus_dmamem_alloc is used, the bus_dmamap_t is usually set to NULL, so
we were never actually freeing any dma memory allocations done via
iwm_dma_contig_alloc(). So we should check dma->vaddr instead of dma->map here.
* Also, the dmamap is actually supposed to be invalidated as part of
bus_dmamem_free(), so bus_dmamap_destroy() is never needed here.
Submitted by: Imre Vadasz <imre@vdsz.com>
Approved by: re (gjb)
Obtained from: DragonflyBSD git ef2b29a7ba6ca8a9d2c82ab591c0622227ff84cb
ic_macaddr is only used for the initial mac address provided by NVM. We should
rather use vap->iv_myaddr when vap != NULL, to allow the MAC address
to be changed later with ifconfig(8).
Submitted by: Imre Vadasz <imre@vdsz.com>
Reviewed by: avos
Approved by: re (gjb)
Obtained from: DragonflyBSD git 4aee7a78275676d22d14c04177bd0c9377d91478
Differential Revision: https://reviews.freebsd.org/D6743
When allocating a new mbuf or bus_dmamap_load()-ing it fails,
we can just keep the old mbuf since we are dropping that packet anyway.
Instead of doing bus_dmamap_create() and bus_dmamap_destroy() all the time,
create an extra bus_dmamap_t which we can use to safely try
bus_dmamap_load()-ing the new mbuf. On success we just swap the spare
bus_dmamap_t with the data->map of that ring entry.
Tested:
Tested with Intel AC7260, verified with vmstat -m that new kernel no
longer visibly leaks memory from the M_DEVBUF malloc type.
Before, leakage was 1KB every few seconds while ping(8)-ing over the wlan
connection.
Submitted by: Imre Vadasz <imre@vdsz.com>
Approved by: re@
Obtained from: DragonflyBSD.git cc440b26818b5dfdd9af504d71c1b0e6522b53ef
Differential Revision: https://reviews.freebsd.org/D6742
* The "if (!data->valid_tx_ant || !data->valid_rx_ant) {" check was getting
triggered with a 3165 chipset.
Submitted by: Imre Vadasz <imre@vdsz.com>
Obtained from: DragonflyBSD 3655dfb6fc311fc83e5ce8370dd91b4cd4a37991
Move some declarations to if_iwmreg.h.
Remove iwm_fw_alive(); just call iwm_post_alive() directly.
Simplify iwm_mvm_add_sta().
Return timeout error from iwm_apm_init().
Print a message when init (i.e. boot) firmware fails to load.
Remove some commented-out code which wouldn't compile anyway.
Move iwm_mvm_tx_fifo to if_iwmreg.h to match better where Linux puts it.
Taken-From: OpenBSD (if_iwm.c r1.80 and if_iwmreg.h r1.11)
Submitted by: Imre Vadasz <imre@vdsz.com>
Obtained from: DragonflyBSD 29fcb331e5620ae145a6ab9cdda830e22fff626a
if_iwm - GC some dead code, left by a partially applied OpenBSD change.
Taken-From: OpenBSD (if_iwm.c r1.69)
Submitted by: Imre Vadasz <imre@vdsz.com>
Obtained from: DragonflyBSD git 07dfed32ea39b980b0b80d27ff938e7c3ca4c0b5
