Commit Graph

29 Commits

Author SHA1 Message Date
Tom Rhodes
a122cca953 These are changes to allow to use the Intel C/C++ compiler (lang/icc)
to build the kernel. It doesn't affect the operation if gcc.

Most of the changes are just adding __INTEL_COMPILER to #ifdef's, as
icc v8 may define __GNUC__ some parts may look strange but are
necessary.

Additional changes:
 - in_cksum.[ch]:
   * use a generic C version instead of the assembly version in the !gcc
     case (ASM code breaks with the optimizations icc does)
     -> no bad checksums with an icc compiled kernel
     Help from:		andre, grehan, das
     Stolen from: 	alpha version via ppc version
     The entire checksum code should IMHO be replaced with the DragonFly
     version (because it isn't guaranteed future revisions of gcc will
     include similar optimizations) as in:
        ---snip---
          Revision  Changes    Path
          1.12      +1 -0      src/sys/conf/files.i386
          1.4       +142 -558  src/sys/i386/i386/in_cksum.c
          1.5       +33 -69    src/sys/i386/include/in_cksum.h
          1.5       +2 -0      src/sys/netinet/igmp.c
          1.6       +0 -1      src/sys/netinet/in.h
          1.6       +2 -0      src/sys/netinet/ip_icmp.c

          1.4       +3 -4      src/contrib/ipfilter/ip_compat.h
          1.3       +1 -2      src/sbin/natd/icmp.c
          1.4       +0 -1      src/sbin/natd/natd.c
          1.48      +1 -0      src/sys/conf/files
          1.2       +0 -1      src/sys/conf/files.amd64
          1.13      +0 -1      src/sys/conf/files.i386
          1.5       +0 -1      src/sys/conf/files.pc98
          1.7       +1 -1      src/sys/contrib/ipfilter/netinet/fil.c
          1.10      +2 -3      src/sys/contrib/ipfilter/netinet/ip_compat.h
          1.10      +1 -1      src/sys/contrib/ipfilter/netinet/ip_fil.c
          1.7       +1 -1      src/sys/dev/netif/txp/if_txp.c
          1.7       +1 -1      src/sys/net/ip_mroute/ip_mroute.c
          1.7       +1 -2      src/sys/net/ipfw/ip_fw2.c
          1.6       +1 -2      src/sys/netinet/igmp.c
          1.4       +158 -116  src/sys/netinet/in_cksum.c
          1.6       +1 -1      src/sys/netinet/ip_gre.c
          1.7       +1 -2      src/sys/netinet/ip_icmp.c
          1.10      +1 -1      src/sys/netinet/ip_input.c
          1.10      +1 -2      src/sys/netinet/ip_output.c
          1.13      +1 -2      src/sys/netinet/tcp_input.c
          1.9       +1 -2      src/sys/netinet/tcp_output.c
          1.10      +1 -1      src/sys/netinet/tcp_subr.c
          1.10      +1 -1      src/sys/netinet/tcp_syncache.c
          1.9       +1 -2      src/sys/netinet/udp_usrreq.c

          1.5       +1 -2      src/sys/netinet6/ipsec.c
          1.5       +1 -2      src/sys/netproto/ipsec/ipsec.c
          1.5       +1 -1      src/sys/netproto/ipsec/ipsec_input.c
          1.4       +1 -2      src/sys/netproto/ipsec/ipsec_output.c

          and finally remove
            sys/i386/i386        in_cksum.c
            sys/i386/include     in_cksum.h
        ---snip---
 - endian.h:
   * DTRT in C++ mode
 - quad.h:
   * we don't use gcc v1 anymore, remove support for it
   Suggested by:	bde (long ago)
 - assym.h:
   * avoid zero-length arrays (remove dependency on a gcc specific
     feature)
     This change changes the contents of the object file, but as it's
     only used to generate some values for a header, and the generator
     knows how to handle this, there's no impact in the gcc case.
   Explained by:	bde
   Submitted by:	Marius Strobl <marius@alchemy.franken.de>
 - aicasm.c:
   * minor change to teach it about the way icc spells "-nostdinc"
   Not approved by:	gibbs (no reply to my mail)
 - bump __FreeBSD_version (lang/icc needs to know about the changes)

Incarnations of this patch survive gcc compiles since a loooong time,
I use it on my desktop. An icc compiled kernel works since Nov. 2003
(exceptions: snd_* if used as modules), it survives a build of the
entire ports collection with icc.

Parts of this commit contains suggestions or submissions from
Marius Strobl <marius@alchemy.franken.de>.

Reviewed by:	-arch
Submitted by:	netchild
2004-03-12 21:45:33 +00:00
David E. O'Brien
a5b5101f5e Move the bktr(4) <arch>/include/ioctl_{bt848,meteor}.h files to dev/bktr
as these ioctl's aren't MD.  This also means they are installed in
/usr/include/dev/bktr now.  Also provide compatability wrappers for
where these headers lived in 4.x.
2003-12-08 07:22:42 +00:00
Roger Hardiman
def1ddf3a8 Fix typo in comments 2000-10-31 14:30:29 +00:00
Roger Hardiman
870b024f5d Add new ioctls for userland access to the MSP device 2000-10-26 16:41:48 +00:00
Roger Hardiman
bcc862e397 Add multiple #include protection
Submitted by:	 Thomas Klausner <wiz@danbala.ifoer.tuwien.ac.at>
2000-04-04 16:46:19 +00:00
Roger Hardiman
cfa7b44621 Update to driver 2.07
Add new Channel Set for France. Submitted by Daniel Dagneaux <dagneaux@lure.u-psud.fr>
2000-01-24 14:00:34 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Roger Hardiman
ec2a37ea3c Bt848 driver release 1.65
Updated with australian channel set

Submitted by:	Ivan Brawley <brawley@internode.com.au>
1999-05-18 12:14:39 +00:00
Roger Hardiman
02819e7033 Corrected ioctl numbers conflict.
Thanks to Vsevolod Lobko <seva@alex-ua.com> for spotting this.
P:
1999-02-15 11:04:36 +00:00
Roger Hardiman
29122ece3e Added new ioctls for Hauppage Infra-Red Remote Control support,
Obtaining the supported channel sets and Controlling the GPIO port.

Submitted by:	Roger Hardiman and Vsevolod Lobko <seva@alex-ua.com>
1999-02-11 10:18:04 +00:00
Roger Hardiman
ba66f0a223 Added METEOR_DEV2 and METEOR_DEV3 1999-01-28 16:32:52 +00:00
Søren Schmidt
ff2c4726bc Changed tuner code to autodetect tuner i2c address.
Addresses were incorrectly hardcoded.

Submitted by:   Roger Hardiman <roger@cs.strath.ac.uk>
1998-09-30 20:43:25 +00:00
Søren Schmidt
11e29cc90f Correct SECAM B-Delay and add XUSSR channel set.
Submitted by: Vsevolod Lobko <seva@alex-ua.com>
1998-09-10 07:52:30 +00:00
Søren Schmidt
58dde31aeb Renamed BT848[SG]CAPAREA to BT848_[SG]CAPAREA.
Added PR kern/7177 for SECAM Video Highway Xtreme with single crystal
PLL configuration submitted by Vsevolod Lobko <seva@alex-ua.com>.
In kernel configuration file add
options OVERRIDE_CARD=2
options OVERRIDE_TUNER=11
options BKTR_USE_PLL

Submitted by: Roger Hardiman <roger@cs.strath.ac.uk>
1998-08-31 18:35:06 +00:00
Søren Schmidt
5d0c8abac1 Added Capture Area ioctl - BT848[SG]CAPAREA.
Normally the full 640x480 (768x576 PAL) image is grabbed. This ioctl
allows a smaller area  from anywhere within the video image to be
grabbed, eg a 400x300 image from (50,10).
See restrictions in BT848SCAPAREA.

Submitted by: Roger Hardiman <roger@cs.strath.ac.uk>
1998-08-31 18:31:36 +00:00
Amancio Hasty
c1224bb717 1.31 Randall Hopper <rhh@ct.picker.com>
submitted ioctl to clear the video buffer
                           prior to starting video capture
			   Amancio : clean up yuv12 so that it does not
                           affect rgb capture. Basically, fxtv after
                           capturing in yuv12 mode , switching to rgb
                           would cause the video capture to be too bright.
1.32                       disable inverse gamma function for rgb and yuv
                           capture. fixed meteor brightness ioctl it now
                           converts the brightness value from unsigned to
                           signed.
1.33                       added sysctl: hw.bt848.tuner, hw.bt848.reverse_mute,
                           hw.bt848.card
			   card takes a value from 0 to bt848_max_card
                           tuner takes a value from 0 to bt848_max_tuner
                           reverse_mute : 0 no effect, 1 reverse tuner
                           mute function some tuners are wired reversed :(
1998-05-16 07:07:10 +00:00
Amancio Hasty
d7ef1f6051 Radio support for bt848 cards from Flemming Jacobsen <fj@trw.nl>
Amancio
1998-02-26 08:19:14 +00:00
Amancio Hasty
2b1973e8ad Bugs/Enhancements:
1. Takeshi Ohashi <ohashi@atohasi.mickey.ai.kyutech.ac.jp> submitted
   code to support bktr_read . /usr/src/share/examples/rgb24.c now works 8)

2. Flemming Jacobsen <fj@schizo.dk.tfs.com> submitted code to support
   radio available with in some bt848 based cards;additionally, wrote
   code to correctly recognized his bt848 card.
3. Roger Hardiman <roger@cs.strath.ac.uk> submitted various fixes to smooth
   out the microcode and made all modes consistent.

4. Added supported for yuv12 so we know can capture raw streams and feed it
   to mpeg_encoder . The upshot is that we can now mpeg encode more and save
   nearly 100 percent of the disk requirements previously for programs such
   as fxtv first save the raw video image to disk then converted to a
   format suitable for mpeg_encode.
1998-02-02 13:09:12 +00:00
Amancio Hasty
9fdd6eda1d Reviewed by: Amancio Hasty
Submitted by:	Amancio Hasty <hasty@star-gate.com>
Added yuv12 support for mpeg encoding and Randall Hopper's fixed for Temporal
Decimation
1997-11-16 04:52:29 +00:00
Mark Murray
8274fc64c2 Add the IOCTL for Luigi's BT848 -> I2C bus driver. 1997-11-06 07:00:45 +00:00
Mark Murray
d32591560a Latest round of patches from the author.
This driver includes the following patches submitted by:

1.0 Hideyuki Suzuki <hideyuki@sat.t.u-tokyo.ac.jp>
Japanese Cable support

2.0 Keith Sklower <sklower@CS.Berkeley.EDU>
Minor update to the BSDI section so it compiles cleanly on BSDI

3.0 Joao Carlos Mendes Luis <jonny@coppe.ufrj.br>
ioctl interface to select video format , NTSC, PAL, etc...
1997-10-07 06:30:01 +00:00
Mark Murray
51c63b7d63 Amancio's latest in the Brooktree driver.
This fixes the european frequency set, separates this further from the
Meteor driver and fixes bugs.
1997-09-09 06:32:32 +00:00
Steve Passe
4abfa50b62 1.15 4/18/97 John-Mark Gurney <gurney_j@resnet.uoregon.edu>
Added [SR]RGBMASKs ioctl for byte swapping.

 1.16          4/20/97    Randall Hopper <rhh@ct.picker.com>
                          Generalized RGBMASK ioctls for general pixel
                          format setting [SG]ACTPIXFMT, and added query API
                          to return driver-supported pix fmts GSUPPIXFMT.

 1.17          4/21/97    hasty@rah.star-gate.com
                          Clipping support added.

 1.18          4/23/97    Clean up after failed CAP_SINGLEs where bt
                          interrupt isn't delivered, and fixed fixing
                          CAP_SINGLEs that for ODD_ONLY fields.

Submitted by:	individuals in above log messages.
1997-05-01 00:15:30 +00:00
Steve Passe
938401213d PAL support: magic numbers moved into format_params structure.
Revised AFC interface.
Fixed DMA_PROG_ALLOC size misdefinition.

Submitted by:	richard@cogsci.ed.ac.uk (Richard Tobin)
1997-04-02 01:48:39 +00:00
Steve Passe
0e23e1a104 added support for EEProms writing/reading. 1997-03-25 04:11:13 +00:00
Steve Passe
d830eb7d9f Submitted by: Michael Petry <petry@netwolf.NetMasters.com>
Michael submitted code to activate the audio muxes.

fsmp:
 extended those changes for different boards.
 auto-detection of board types.
 auto-detection of tuner types.
 auto-detection of stereo option
1997-03-21 17:29:54 +00:00
Steve Passe
535341aacb additions for table-driven frequency calculation.
addition of colorbar ioctl.
1997-03-19 19:08:31 +00:00
Steve Passe
d380dd6d8e patches for bt848 specific hue/bright/contrast/satu/satv. 1997-03-16 07:40:01 +00:00
Mark Murray
51e053d6cc Initial import of the Brooktree PCI-TV drivers. I have not tested
these, they may not even compile. I am importing them on behalf
of the submitters.
Submitted by:	amancio, smp
1997-03-10 06:38:26 +00:00