Previously ar would report an error like "ar: fatal: Write error"
without including additional errno information. Change warnings and
errors to include archive_errno() so that the user may have some idea
of the reason for the failure.
Reviewed by: brooks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17650
Support a "live" mode in ktrdump enabled via the -l flag. In this
mode, ktrdump polls the kernel's trace buffer periodically (currently
hardcoded as a 50 millisecond interval) and dumps any newly added
entries. Fancier logic for the timeout (e.g. a command line option or
some kind of backoff based on the time since the last entry) can be
added later as the need arises.
While here, fix some bugs from when this was Capsicum-ized:
- Use caph_limit_stream() for the output stream so that isatty() works
and the output can be line-buffered (especially useful for live
mode).
- Use caph_limit_stderr() to permit error messages to be displayed if
an error occurs after cap_enter().
Reviewed by: kib, 0mp (manpage)
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D17315
it appropriately when building share/ctypedef and share/colldef.
This makes the resulting locale data in EL->EB (amd64->powerpc64) cross
build and in the native EB build match. Revert the changes done to libc
in r308170 as they are no longer needed.
PR: 231965
Reviewed by: bapt, emaste, sbruno, 0mp
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D17603
Due to markup issues, the DESCRIPTION OF MEMORY section is rather
unreadable; rework it a bit, using subsections for different lines of the
top output, and move it closer to description.
While here, pet manlint ordering other sections as expected.
Submitted by: Yuri Pankov <yuripv@yuripv.net>
Reviewed by: eadler
Approved by: re (gjb), krion (mentor)
Differential Revision: https://reviews.freebsd.org/D17369
This is a direct commit to a generated file. Simon plans to fix this
upstream before the next import.
PR: 231557
Approved by: re (gjb)
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
This leverages CONFS to handle the install and purges an old comment.
Approved by: re (blanket, pkgbase), bapt (mentor)
Differential Revision: https://reviews.freebsd.org/D17215
Update libarchive to 3.3.3
As all important changes have already been merged from libarchive git
this is just version number bump, documentation update and some
polishing for cpio tests. Other source code changes are not relevant to
FreeBSD.
Approved by: re (gjb)
MFC after: 1 week
We generate the installed objcopy man page from ELF Tool Chain's
elfcopy, but the sed expresion used for this ended up producing
"objcopy, objcopy - copy and translate object files".
Instead of replacing the first "elfcopy" with objcopy, just remove it.
Approved by: re (gjb)
imprudent reuse of static buffers, the end-of-transfer statistics
displayed when stdout is not a tty always ended up as 0 B / 0 Bps.
Reorganize the code to use caller-provided buffers, tweak the ETA
display a bit, and reduce the visual differences between the tty and
non-tty end-of-transfer displays.
PR: 202424
Approved by: re (gjb@)
Don't just exit when encountering the 'q' command if we edit file
inplace, and give mf_fgets() a chance to actually handle the
inplace case.
Also add a regression test.
Submitted by: Yuri Pankov <yuripv@yuripv.net>
Approved by: re (kib)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D16798
Previously, x86 used static ranges of IRQ values for different types
of I/O interrupts. Interrupt pins on I/O APICs and 8259A PICs used
IRQ values from 0 to 254. MSI interrupts used a compile-time-defined
range starting at 256, and Xen event channels used a
compile-time-defined range after MSI. Some recent systems have more
than 255 I/O APIC interrupt pins which resulted in those IRQ values
overflowing into the MSI range triggering an assertion failure.
Replace statically assigned ranges with dynamic ranges. Do a single
pass computing the sizes of the IRQ ranges (PICs, MSI, Xen) to
determine the total number of IRQs required. Allocate the interrupt
source and interrupt count arrays dynamically once this pass has
completed. To minimize runtime complexity these arrays are only sized
once during bootup. The PIC range is determined by the PICs present
in the system. The MSI and Xen ranges continue to use a fixed size,
though this does make it possible to turn the MSI range size into a
tunable in the future.
As a result, various places are updated to use dynamic limits instead
of constants. In addition, the vmstat(8) utility has been taught to
understand that some kernels may treat 'intrcnt' and 'intrnames' as
pointers rather than arrays when extracting interrupt stats from a
crashdump. This is determined by the presence (vs absence) of a
global 'nintrcnt' symbol.
This change reverts r189404 which worked around a buggy BIOS which
enumerated an I/O APIC twice (using the same memory mapped address for
both entries but using an IRQ base of 256 for one entry and a valid
IRQ base for the second entry). Making the "base" of MSI IRQ values
dynamic avoids the panic that r189404 worked around, and there may now
be valid I/O APICs with an IRQ base above 256 which this workaround
would incorrectly skip.
If in the future the issue reported in PR 130483 reoccurs, we will
have to add a pass over the I/O APIC entries in the MADT to detect
duplicates using the memory mapped address and use some strategy to
choose the "correct" one.
While here, reserve room in intrcnts for the Hyper-V counters.
PR: 229429, 130483
Reviewed by: kib, royger, cem
Tested by: royger (Xen), kib (DMAR)
Approved by: re (gjb)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16861
netascii is obsolete and inefficient. It isn't even supported by many
clients. Better to use binary mode by default.
Reviewed by: cem
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16869
The current kernel ifunc implementation creates a PLT entry for each
ifunc definition. ifunc calls therefore consist of a call to the
PLT entry followed by an indirect jump. The jump target is written
during boot when the kernel linker resolves R_[*]_IRELATIVE relocations.
This implementation is defined by requirements for userland code, where
text relocations are avoided. This requirement is not present for the
kernel, so the implementation has avoidable overhead (namely, an extra
indirect jump per call).
Address this for now by adding a special option to the static linker
to inhibit PLT creation for ifuncs. Instead, relocations to ifunc call
sites are passed through to the output file, so the kernel linker can
enumerate such call sites and apply PC-relative relocations directly
to the text section. Thus the overhead of an ifunc call becomes exactly
the same as that of an ordinary function call. This option is only for
use by the kernel and will not work for regular programs.
The final form of this optimization is up for debate; for now, this
change is simple and static enough to be acceptable as an interim
solution.
Reviewed by: emaste
Discussed with: arichardson, dim
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16748
Fixes courtesy of arichardson and jmg:
- HACKING was pointing to the wrong place
- Added headers were being relied on implicitly, but libstdc++ did not
comply with the unspoken wishes of dtc.
MFC after: 1 week
grep(1) changes:
- Pet mandoc & igor.
- Stylize the text more with macros when appropriate.
- Stylize equal signs in long options (e.g., "--color=auto") with
the "Cm" macro as suggested by mdoc(7).
- Add missing arguments to --exlude, --exclude-dir, --include and
--include-dir.
- Remove a duplicate entry for the --context flag.
- Use a list in the EXAMPLES sections to make it easier to tell
which paragraphs belong to which example.
- Cross reference zgrep(1).
zgrep(1) changes:
- Fix Nd.
- Split synopsis into paragraphs for readability.
- Cross reference bzip(1), grep(1) and xz(1).
Reviewed by: bcr
Approved by: mat (mentor)
Differential Revision: https://reviews.freebsd.org/D16779
It was #ifdef'd out in the 4.4BSD import and hasn't been re-enabled
since then.
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16804
Instead of doing a second pass to skip empty lines if we've specified -I, go
ahead and check both at once. Ignore critera has been split out into its own
function to try and keep the logic cleaner.
As noted by cem in r338035, coccinelle invokes diff(1) with the -B flag.
This was not previously implemented here, so one was forced to create a link
for GNU diff to /usr/local/bin/diff
Implement the -B flag and add some primitive tests for it. It is implemented
in the same fashion that -I is implemented; each chunk's lines are scanned,
and if a non-blank line is encountered then the chunk will be output.
Otherwise, it's skipped.
MFC after: 2 weeks
Notable fixes:
- Overlays may now be generated properly without -@
- /__local_fixups__ were not including unit address in their structure
- The error reporting a magic token was misleading, reporting
"Bad magic token in header. Got d00dfeed expected 0xd00dfeed"
if the token was missing. This has been split out into a separate message.
MFC after: 1 week
The fix is only partial and causes an asymmetry which breaks a test in
multi_test.sh.
We should consider both parts of the issue found in OpenBSD[1], but for now
just revert the change.
[1] http://undeadly.org/cgi?action=article;sid=20180728110010
Reported by: asomers
The bug was that isalnum() is not exactly equivalent to previous code which
also allowed characters "$" and "_", so check for those explicitly.
Reported by: tuexen@
