- Document better what the -C option means.
- The -c option is currently a no-op.
- The -D and -h options do not allow switching between
single/dual console modes and internal/video consoles.
(This used to be true for the old biosdisk boot code,
but now they just force the multiple consoles mode and
serial console, respectively.)
1M blocks and optionally write the read data to a file or disk.
If a read error happens, the 1M block gets put on the end of the worklist
and will be retried with 64k blocksize.
If a read error happens again, the 64k block gets put at the end of the
worklist and will be retried with single sector reads.
The program keeps trying until you stop it.
You can refresh a disk:
recoverdisk /dev/ad1 /dev/ad1
or salvage a floppy:
recoverdisk /dev/fd0 myfloppy.flp
standing ability to list a non-existant device in /etc/ttys to keep it
from dying. This is a documented feature of init(8):
The init utility can also be used to keep arbitrary daemons running,
automatically restarting them if they die. In this case, the first field
in the ttys(5) file must not reference the path to a configured device
node and will be passed to the daemon as the final argument on its com-
mand line. This is similar to the facility offered in the AT&T System V
UNIX /etc/inittab.
So rather than fix the man page to 'break' this feature, back out the change.
At the time this change was made, people felt that the spamage from
getty was annoying on headless consoles. Andrew Gallatin noted:
> Most of my machines are headless without video cards and use a serial
> console. With devfs this means that /dev/ttyv[1-N] do not exist and
> getty bitches like this:
>
> Sep 26 11:00:11 monet getty[543]: open /dev/ttyv1: No such file or directory
and we went off and applied this hack rather than fixing getty to
sleep forever when it gets an unknown device, as was Andrew's other
suggestion. Since it breaks things, I'm off to do that instead.
and disklabel.5. Refrencing bsdlabel.5 is somewhat bogus as it is not
connected to the build and is mostly unwritten at this point.
Reported by: Matthias Andree <matthias.andree at web.de>
PR: docs/72020
After this change it should be possible to use very big md(4) devices.
- Clean up and simplify the code a bit.
- Use humanize_number(3) to print size of md(4) devices.
- Add 't' suffix which stands for terabyte.
- Make '-S' to really work with all types of devices.
- Other minor changes.
and sent to the DIVERT socket while the original packet continues with the
next rule. Unlike a normally diverted packet no IP reassembly attemts are
made on tee'd packets and they are passed upwards totally unmodified.
Note: This will not be MFC'd to 4.x because of major infrastucture changes.
PR: kern/64240 (and many others collapsed into that one)
contain O_UID, O_GID and O_JAIL opcodes, the F_NOT or F_OR logical
operator bits get clobbered. Making it impossible to use the ``NOT'' or
``OR'' operators with uid, gid and jail based constraints.
The ipfw_insn instruction template contains a ``len'' element which
stores two pieces of information, the size of the instruction
(in 32-bit words) in the low 6 bits of "len" with the 2 remaining
bits to implement OR and NOT.
The current code clobbers the OR and NOT bits by initializing the
``len'' element to the size, rather than OR'ing the bits. This change
fixes this by changing the initialization of cmd->len to an OR operation
for the O_UID, O_GID and O_JAIL opcodes.
This may be a MFC candidate for RELENG_5.
Reviewed by: andre
Approved by: luigi
PR: kern/63961 (partially)
0xffffffff sectors. Document this limit and avoid installing bogus
labels on disks with more sectors.
Allowing the installation of labels addressing as much of the disk as
possiable may be a useful addition in some situations, but this was easy
to implement and should reduce confusion.
PR: bin/71408
increasing it. Add code to ifconfig to use this size to find the
sockaddr_dl after the struct if_data in the routing message. This
allows struct if_data to grow (up to 255 bytes) without breaking
ifconfig.
Submitted by: peter
keyword but without 'logamount' limit the amount of their log messages
by net.inet.ip.fw.verbose_limit sysctl value.
RELENG_5 candidate.
PR: kern/46080
Submitted by: Dan Pelleg
MFC after: 1 week
verification of regular data when device is in complete state.
On verification error, EIO error is returned for the bio and sysctl
kern.geom.raid3.stat.parity_mismatch is increased.
Suggested by: phk
as well, even if device is in complete state.
I observe 40% of speed-up with this option for random read operations,
but slowdown for sequential reads.
Basically, without this option reading from a RAID3 device built from 5
components (c0-c4) looks like this:
Request no. Used components
1 c0+c1+c2+c3
2 c0+c1+c2+c3
3 c0+c1+c2+c3
With the new feature:
Request no. Used components
1 c0+c1+c2+c3
2 (c1^c2^c3^c4)+c1+c2+c3
3 c0+(c0^c2^c3^c4)+c2+c3
4 c0+c1+(c0^c1^c3^c4)+c3
5 c0+c1+c2+(c0^c1^c2^c4)
6 c0+c1+c2+c3
[...]
has only been partly initialized via newfs(8) so that it applies to both
UFS1 and UFS2.
Submitted by: "Xin LI" delphij at frontfree dot net
MFC: maybe?
