This basically restores the spirit of r203535, which was partially reverted
in r205557, while we still map fixed amount to work around transient issues
we experienced with r203535.
Prodded by: avg
Tested by: avg
MFC after: 1 week
on PowerPC support. This was clearly not something syscons was
designed to do (very specific assumptions about the nature of VGA
consoles on PCs), but fortunately others have long since blazed
the way on making it work regardless of that.
Sponsored by: DARPA, AFRL
D2500CC which I have, syscons in text-mode fails to show the expected
contents due to write errors into video-memory.
At least one of the causes is that we copy from syscons internal buffer
to the video memory with optimized bcopy(9) which uses >16bit operations.
Until now, 32bit and wider operations have always worked on the video
memory, but since I cannot find a single source which says that this
SHALL work, and since these chipsets/bugs are now out there, this
commit changes syscons to always use 16bit copies on i386 & amd64.
This may be relevevant for PR's:
166262
166639
and various other bug reports floating elsewhere on the net, but
I lack hardware to test those.
one. Interestingly, these are actually the default for quite some time
(bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
since r52045) but even recently added device drivers do this unnecessarily.
Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
Discussed with: jhb
- Also while at it, use __FBSDID.
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
- Implement bus_adjust_resource() methods as far as necessary and in non-PCI
bridge drivers as far as feasible without rototilling them.
- As NEW_PCIB does a layering violation by activating resources at layers
above pci(4) without previously bubbling up their allocation there, move
the assignment of bus tags and handles from the bus_alloc_resource() to
the bus_activate_resource() methods like at least the other NEW_PCIB
enabled architectures do. This is somewhat unfortunate as previously
sparc64 (ab)used resource activation to indicate whether SYS_RES_MEMORY
resources should be mapped into KVA, which is only necessary if their
going to be accessed via the pointer returned from rman_get_virtual() but
not for bus_space(9) as the later always uses physical access on sparc64.
Besides wasting KVA if we always map in SYS_RES_MEMORY resources, a driver
also may deliberately not map them in if the firmware already has done so,
possibly in a special way. So in order to still allow a driver to decide
whether a SYS_RES_MEMORY resource should be mapped into KVA we let it
indicate that by calling bus_space_map(9) with BUS_SPACE_MAP_LINEAR as
actually documented in the bus_space(9) page. This is implemented by
allocating a separate bus tag per SYS_RES_MEMORY resource and passing the
resource via the previously unused bus tag cookie so we later on can call
rman_set_virtual() in sparc64_bus_mem_map(). As a side effect this now
also allows to actually indicate that a SYS_RES_MEMORY resource should be
mapped in as cacheable and/or read-only via BUS_SPACE_MAP_CACHEABLE and
BUS_SPACE_MAP_READONLY respectively.
- Do some minor cleanup like taking advantage of rman_init_from_resource(),
factor out the common part of bus tag allocation into a newly added
sparc64_alloc_bus_tag(), hook up some missing newbus methods and replace
some homegrown versions with the generic counterparts etc.
- While at it, let apb_attach() (which can't use the generic NEW_PCIB code
as APB bridges just don't have the base and limit registers implemented)
regarding the config space registers cached in pcib_softc and the SYSCTL
reporting nodes set up.
when the original offset is bigger than size of one page. X86BIOS macros
cannot be used here because it is assumed address is only linear in a page.
Tested by: netchild
not change interrupt vector if it is not pointing the ROM itself. Actually,
we just fail shadowing altogether if that is the case because the shadowed
copy will be useless for sure and POST may not be relocatable or useful.
While I'm here, fix a debugging message under bootverbose, really. r211829
fixed one case but broke another. Mea Culpa.
supported by many BIOSes to improve performance of VESA BIOS calls for real
mode OSes but it is not our intention here. However, this may help some
platforms where the video ROMs are inaccessible after suspend, for example.
Note it may consume up to 64K bytes of contiguous memory depending on video
controller model when it is enabled. This feature can be disabled by
setting zero to 'debug.vesa.shadow_rom' loader tunable via loader(8) or
loader.conf(5). The default is 1 (enabled), for now.
FPU registers for copying. Remove the switch table and jumps from
bcopy/bzero/... to the actual implementation.
As a side-effect, i486-optimized bzero is removed.
Reviewed by: bde
Tested by: pho (previous version)
free(9) and it can cause kernel panic when there are multiple graphics
controllers in the system.
Tested by: Brandon Gooch (jamesbrandongooch at gmail dot com)
MFC after: 3 days
First, we compare mode table data against minimum value. If the mode table
does not make sense, we set the minimum in the mode info. When we actually
set the mode, we try VESA BIOS function and compare it against the previous
value. If it makes more sense, update the information.
- Add a separate palette data for 8-bit DAC mode when SC_PIXEL_MODE is set
and fill it up with default gray-scale palette data for text. Now we don't
have to set `hint.sc.0.vesa_mode' to get the default palette data.
- Add a new adapter flag, V_ADP_DAC8 to track whether the controller is
using 8-bit palette format and load correct palette when switching modes.
- Set 8-bit DAC mode only for non-VGA compatible graphics mode.
