management involving rcmd_af(), getaddrinfo(), freeaddrinfo(), etc.
We set *ahost to point to ai->canonname; and later free the ai-> stuff
and still leave the old pointers in *ahost to the freed data.
Perhaps the best way to deal with this is a static buffer or a static
strdup() that is freed on the next iteration or something. This gives
me headaches just thinking about this.
The new 'AJ' default for malloc() tripped this up.
of the processing of the recursion, "scan" would be pointing to O_CH
(or O_QUEST), which would then be interpreted as being the end character
for altoffset().
We avoid this by properly increasing scan before leaving the switch.
Without this, something like (a?b?)?cc would result in a g->moffset of
1 instead of 2.
I added a case to the soon-to-be-imported regex(3) test code to catch
this error.
string may be found (from the beginning of the pattern), the point
at which must is found minus that offset may actually point to some
place before the start of the text.
In that case, make start = start.
Alternatively, this could be tested for in the preceding if, but it
did not occur to me. :-)
Caught by: regex(3) test code
use a CHAR_MIN-based array, like elsewhere in the code.
Remove a number of unused variables (some due to the above change, one
that was left after a number of optimizing steps through the source).
Brucified by: bde
remove (comment out) functions defined or depricated elsewhere:
bsearch, lfind, lsearch, insque, remque
change hcreate to take a size_t rather than uint (essentially the same)
since hcreate/hdestroy are now in <search.h>, remove private search.h
in lib/libc/db/hash/
add $FreeBSD tags to hsearch.c
- permit numeric scopeid, be more careful about buffer size
TODO: 2nd arg type should be socklen_t for RFC2553 conformance,
but due to include file dependency it is not a easy thing to do
(netdb.h does not have socklen_t)
soon to be committed syscall stubs. These calls will be used to get
and set capability state associated with executables.
Obtained from: TrustedBSD Project
interface addresses in a portable manner, without headache of SIOCGIFCONF
or sysctl. it is in bsdi/openbsd/netbsd already.
from kame tree (actually, mandatory for latest kame tree).
when parsing certain DNS records during a reverse address resolution. Thus
when code tries to examine the returned host name, it dereferences a null
pointer :-(
Problem noticed by: ps
VIS_HTTPSTYLE is a new encoding style for use in vis(), strvis() and
strvisx() that escapes characters according to RFC 1808 (URI encoding).
Since decoding of these require different detection of start-points of
escaped characters, VIS_HTTPSTYLE can be given as flag to unvis().
unvis() will then properly decode URIs.
A new function appeared, strunvisx(): strunvisx() behaves similar as
strunvis(), with one exception: It has an additional flag parameter,
which is passed to unvis() to archive the effect I described above.
previous commits.
At the time we search the pattern for the "must" string, we now compute
the longest offset from the beginning of the pattern at which the must
string might be found. If that offset is found to be infinite (through
use of "+" or "*"), we set it to -1 to disable the heuristics applied
later.
After we are done with pre-matching, we use that offset and the point in
the text at which the must string was found to compute the earliest
point at which the pattern might be found.
Special care should be taken here. The variable "start" is passed to the
automata-processing functions fast() and slow() to indicate the point in
the text at which they should start working from. The real beginning of
the text is passed in a struct match variable m, which is used to check
for anchors. That variable, though, is initialized with "start", so we
must not adjust "start" before "m" is properly initialized.
Simple tests showed a speed increase from 100% to 400%, but they were
biased in that regexec() was called for the whole file instead of line
by line, and parenthized subexpressions were not searched for.
This change adds a single integer to the size of the "guts" structure,
and does not change the ABI.
Further improvements possible:
Since the speed increase observed here is so huge, one intuitive
optimization would be to introduce a bias in the function that computes
the "must" string so as to prefer a smaller string with a finite offset
over a larger one with an infinite offset. Tests have shown this to be a
bad idea, though, as the cost of false pre-matches far outweights the
benefits of a must offset, even in biased situations.
A number of other improvements suggest themselves, though:
* identify the cases where the pattern is identical to the must
string, and avoid entering fast() and slow() in these cases.
* compute the maximum offset from the must string to the end of
the pattern, and use that to set the point at which fast() and
slow() should give up trying to find a match, and return then
return to pre-matching.
* return all the way to pre-matching if a "match" was found and
later invalidated by back reference processing. Since back
references are evil and should be avoided anyway, this is of
little use.
The BM algorithm works by scanning the pattern from right to left,
and jumping as many characters as viable based on the text's mismatched
character and the pattern's already matched suffix.
This typically enable us to test only a fraction of the text's characters,
but has a worse performance than the straight-forward method for small
patterns. Because of this, the BM algorithm will only be used if the
pattern size is at least 4 characters.
Notice that this pre-matching is done on the largest substring of the
regular expression that _must_ be present on the text for a succesful
match to be possible at all.
For instance, "(xyzzy|grues)" will yield a null "must" substring, and,
therefore, not benefit from the BM algorithm at all. Because of the
lack of intelligence of the algorithm that finds the "must" string,
things like "charjump|matchjump" will also yield a null string. To
optimize that, "(char|match)jump" should be used.
The setup time (at regcomp()) for the BM algorithm will most likely
outweight any benefits for one-time matches. Given the slow regex(3)
we have, this is unlikely to be even perceptible, though.
The size of a regex_t structure is increased by 2*sizeof(char*) +
256*sizeof(int) + strlen(must)*sizeof(int). This is all inside the
regex_t's "guts", which is allocated dynamically by regcomp(). If
allocation of either of the two tables fail, the other one is freed.
In this case, the straight-forward algorithm is used for pre-matching.
Tests exercising the code path affected have shown a speed increase of
50% for "must" strings of length four or five.
API and ABI remain unchanged by this commit.
The patch submitted on the PR was not used, as it was non-functional.
PR: 14342
not have a user-supplied signal handler, when a signal is delivered, one
thread will receive the signal, and then the code reverts to having no
signal handler for the signal. This can leave the other sigwait()ing
threads stranded permanently if the signal is later ignored, or can result
in process termination when the process should have delivered the signal to
one of the threads in sigwait().
To fix this problem, maintain a count of sigwait()ers for each signal that
has no default signal handler. Use the count to correctly install/uninstall
dummy signal handlers.
Reviewed by: deischen
available. If not, it falls back to the existing hack and slash method.
A positive side effect is that non-root users may now use Disk_Names(),
for non-dangerous libh/disk.tcl testing.
Reviewed by: phk
- Have NgSendAsciiMsg() return the same token as NgSendMsg()
- Document that NgSendMsg() and NgSendAsciiMsg() return the token
- Add MLINKS for the functions defined in netgraph(3)
getaddrinfo() accidentally returns IPv4 mapped IPv6 address instead
of native IPv4 address.
Now, getaddinfo() is scoped address ready. You can put scoped
address within /etc/hosts.
Obtained from: KAME Project.
- Multiple PPTP clients behind NAT to the same or different servers.
- Single PPTP server behind NAT -- you just need to redirect TCP
port 1723 to a local machine. Multiple servers behind NAT is
possible but would require a simple API change.
- No API changes!
For more information on how this works see comments at the start of
the alias_pptp.c.
PacketAliasPptp() is no longer necessary and will be removed soon.
Submitted by: Erik Salander <erik@whistle.com>
Reviewed by: ru
Rewritten by: ru
Reviewed by: Erik Salander <erik@whistle.com>
renamed to {s|g}etflagsbyname, which received objections. They're
now called strtofflags (string to file flags) and fflagstostr (file
flags to string).
Suggested by: bde
not allowed to return EINTR, but use of pthread_suspend_np() could cause
EINTR to be returned. To fix this, restructure pthread_suspend_np() so that
it does not interrupt a thread that is waiting on a mutex or condition, and
keep enough state around that pthread_resume_np() can fix things up
afterwards.
Reviewed by: deischen
It does mean that it is now possible to run passive-mode FTP
server behind NAT.
- SECURITY: FTP aliasing engine now ensures that:
o the segment preceding a PORT/227 segment terminates with a \r\n;
o the IP address in the PORT/227 matches the source IP address of
the packet;
o the port number in the PORT command or 277 reply is greater than
or equal to 1024.
Submitted by: Erik Salander <erik@whistle.com>
Reviewed by: ru
.Pp
.Fn func
.Pp
Description ...
with a list (Bl ... Li ... El).
- Remove a superfluous ``.Sh ENVIRONMENT'' and replace it with a ``.Pp''
within the IMPLEMENTATION DETAILS section.
Reviewed by: rwatson
right now...
I talked w/ phk last night and "fixing" this in a generic way is going
to require a lot of complex thought on stacking let alone the NFS problems..
add missing sys/time.h for struct timespec def...
standardized interface to the capability support in TrustedBSD.
o Not currently enabled in Makefile, as this code depends on syscalls
and include files that will be committed at a later date.
Obtained from: TrustedBSD Project
o Add shared library version 2 to libposix1e given API changes, et al
o Commented out cap_*.c as that is not currently being compiled into
the library (pending syscalls being committed)
Obtained from: TrustedBSD Project
o Switch reference to www.trustedbsd.org instead of POSIX.1e implementation
page
o Add cross references to capabilities man pages
o Remove extended attribute not implemented "BUGS" entry
Obtained from: TrustedBSD Project
from the "common" directory.
As a side-effect, this also fixes a bug in the ordering of global
constructors and destructors on the Alpha. See revision 1.3 of
"../common/crtbegin.c" for details.
