Some older compilers, when generating PIC code, cannot handle inline
asm that clobbers %ebx (because %ebx is used as the GOT offset
register). Userspace versions avoid clobbering %ebx by saving it to
stack before executing the CPUID instruction.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
[MC] Make symbol version errors non-fatal
We stil don't have a source location, which is pretty lame, but at
least we won't tell the user to file a clang bug report anymore.
Fixes PR40712
This will make errors for symbols with @@ versions that are not defined
non-fatal. For example:
void f(void)
{
__asm__(".symver foo,bar@@baz");
}
will now result in:
error: versioned symbol bar@@baz must be defined
instead of clang crashing with a diagnostic report.
PR: 234671
Upstream PR: https://bugs.llvm.org/show_bug.cgi?id=40712
MFC after: 3 days
This reduces the overhead of TLB invalidations by ensuring that we
only interrupt CPUs which are using the given pmap. Tracking is
performed in pmap_activate(), which gets called during context switches:
from cpu_throw(), if a thread is exiting or an AP is starting, or
cpu_switch() for a regular context switch.
For now, pmap_sync_icache() still must interrupt all CPUs.
Reviewed by: kib (earlier version), jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18874
This includes support for pmap_enter(..., psind=1) as described in the
commit log message for r321378.
The changes are largely modelled after amd64. arm64 has more stringent
requirements around superpage creation to avoid the possibility of TLB
conflict aborts, and these requirements do not apply to RISC-V, which
like amd64 permits simultaneous caching of 4KB and 2MB translations for
a given page. RISC-V's PTE format includes only two software bits, and
as these are already consumed we do not have an analogue for amd64's
PG_PROMOTED. Instead, pmap_remove_l2() always invalidates the entire
2MB address range.
pmap_ts_referenced() is modified to clear PTE_A, now that we support
both hardware- and software-managed reference and dirty bits. Also
fix pmap_fault_fixup() so that it does not set PTE_A or PTE_D on kernel
mappings.
Reviewed by: kib (earlier version)
Discussed with: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18863
Differential Revision: https://reviews.freebsd.org/D18864
Differential Revision: https://reviews.freebsd.org/D18865
Differential Revision: https://reviews.freebsd.org/D18866
Differential Revision: https://reviews.freebsd.org/D18867
Differential Revision: https://reviews.freebsd.org/D18868
But ipsec_delete_pcbpolicy() uses some VNET-virtualized variables,
and thus it needs VNET context, that is missing during gtaskqueue
executing. Use inp_vnet context to set curvnet in in_pcbfree_deferred().
PR: 235684
MFC after: 1 week
ratelimiting code. The two modules (lagg and vlan) did have
allocation routines, and even though they are indirect (and
vector down to the underlying interfaces) they both need to
have a free routine (that also vectors down to the actual interface).
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D19032
be_destroy is documented to recursively destroy a boot environment. In the
case of snapshots, one would take this to mean that these are also
recursively destroyed. However, this was previously not the case.
be_destroy would descend into the be_destroy callback and attempt to
zfs_iter_children on the top-level snapshot, which is bogus.
Our alternative approach is to take note of the snapshot name and iterate
through all of fs children of the BE to try destruction in the children.
The -o option is also fixed to work properly with deep BEs. If the BE was
created with `bectl create -e otherDeepBE newDeepBE`, for instance, then a
recursive snapshot of otherDeepBE would have been taken for construction of
newDeepBE but a subsequent destroy with BE_DESTROY_ORIGIN set would only
clean up the snapshot at the root of otherDeepBE: ${BEROOT}/otherDeepBE@...
The most recent iteration instead pretends not to know how these things
work, verifies that the origin is another BE and then passes that back
through be_destroy to DTRT when snapshots and deep BEs may be in play.
MFC after: 1 week
Newer cores have the 'tlbilx' instruction, which doesn't broadcast over
CoreNet. This is significantly faster than walking the TLB to invalidate
the PID mappings. tlbilx with the arguments given takes 131 clock cycles to
complete, as opposed to 512 iterations through the loop plus tlbre/tlbwe at
each iteration.
MFC after: 3 weeks
The panic message lead people to believe some userland CAM request had
caused a problem when in reallity it was for a kernel request (eg the
USER bit was cleared). Reword message. Also, improve a couple of
comments to reflect that the periph shouldn't be completely torn down
before we get here (so the path and sim pointers should be valid, but
aren't and the code is designed to be robust enough in the face of
that to give a specific panic message).
Set up zpools with a more unique name, stash the zpool name away in a file pointed
to by `$ZPOOL_NAME_FILE` (which is relative to a per-testcase generated temporary
directory), then remove the file based on `$ZPOOL_NAME_FILE` in the cleanup
routines.
This is a more concurrency-safe solution and will allow the testcases to be safely
executed in parallel.
Reviewed by: kevans, jtl
Approved by: jtl (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19024
This issue was noticed when running `make manlint` as part of MFCing r342597 to
^/stable/11:
```
$ make -C share/man/man8 rc.8lint
mandoc -Tascii -Tlint rc.8
mandoc: rc.8:548:6: STYLE: referenced manual not found: Xr rc.resume 8
$
```
This is a followup commit to r339818.
Reviewed by: eugen
Approved by: jtl (mentor)
MFC after: 1 week
MFC to: ^/stable/12
Differential Revision: https://reviews.freebsd.org/D19158
Sync libarchive with vendor.
Relevant vendor changes:
PR #1085: Fix a null pointer dereference bug in zip writer
PR #1110: ZIP reader added support for XZ, LZMA, PPMD8 and BZIP2
decopmpression
PR #1116: Add support for 64-bit ar format
PR #1120: Fix a 7zip crash [1] and a ISO9660 infinite loop [2]
PR #1125: RAR5 reader - fix an invalid read and a memory leak
PR #1131: POSIX reader - do not fail when tree_current_lstat() fails
due to ENOENT [3]
PR #1134: Delete unnecessary null pointer checks before calls of free()
OSS-Fuzz 10843: Force intermediate to uint64_t to make UBSAN happy.
OSS-Fuzz 11011: Avoid buffer overflow in rar5 reader
PR: 233006 [3]
Security: CVE-2019-1000019 [1], CVE-2019-1000020 [2]
MFC after: 2 weeks
Relevant vendor changes:
PR #1085: Fix a null pointer dereference bug in zip writer
PR #1110: ZIP reader added support for XZ, LZMA, PPMD8 and BZIP2
decopmpression
PR #1116: Add support for 64-bit ar format
PR #1120: Fix a 7zip crash [1] and a ISO9660 infinite loop [2]
PR #1125: RAR5 reader - fix an invalid read and a memory leak
PR #1131: POSIX reader - do not fail when tree_current_lstat() fails
due to ENOENT [3]
PR #1134: Delete unnecessary null pointer checks before calls of free()
OSS-Fuzz 10843: Force intermediate to uint64_t to make UBSAN happy.
OSS-Fuzz 11011: Avoid buffer overflow in rar5 reader
PR: 233006 [3]
Security: CVE-2019-1000019 [1], CVE-2019-1000020 [2]
So far, intr_{g,s}etaffinity(9) take a single int for identifying
a device interrupt. This approach doesn't work on all architectures
supported, as a single int isn't sufficient to globally specify a
device interrupt. In particular, with multiple interrupt controllers
in one system as found on e. g. arm and arm64 machines, an interrupt
number as returned by rman_get_start(9) may be only unique relative
to the bus and, thus, interrupt controller, a certain device hangs
off from.
In turn, this makes taskqgroup_attach{,_cpu}(9) and - internal to
the gtaskqueue implementation - taskqgroup_attach_deferred{,_cpu}()
not work across architectures. Yet in turn, iflib(4) as gtaskqueue
consumer so far doesn't fit architectures where interrupt numbers
aren't globally unique.
However, at least for intr_setaffinity(..., CPU_WHICH_IRQ, ...) as
employed by the gtaskqueue implementation to bind an interrupt to a
particular CPU, using bus_bind_intr(9) instead is equivalent from
a functional point of view, with bus_bind_intr(9) taking the device
and interrupt resource arguments required for uniquely specifying a
device interrupt.
Thus, change the gtaskqueue implementation to employ bus_bind_intr(9)
instead and intr_{g,s}etaffinity(9) to take the device and interrupt
resource arguments required respectively. This change also moves
struct grouptask from <sys/_task.h> to <sys/gtaskqueue.h> and wraps
struct gtask along with the gtask_fn_t typedef into #ifdef _KERNEL
as userland likes to include <sys/_task.h> or indirectly drags it
in - for better or worse also with _KERNEL defined -, which with
device_t and struct resource dependencies otherwise is no longer
as easily possible now.
The userland inclusion problem probably can be improved a bit by
introducing a _WANT_TASK (as well as a _WANT_MOUNT) akin to the
existing _WANT_PRISON etc., which is orthogonal to this change,
though, and likely needs an exp-run.
While at it:
- Change the gt_cpu member in the grouptask structure to be of type
int as used elswhere for specifying CPUs (an int16_t may be too
narrow sooner or later),
- move the gtaskqueue_enqueue_fn typedef from <sys/gtaskqueue.h> to
the gtaskqueue implementation as it's only used and needed there,
- change the GTASK_INIT macro to use "gtask" rather than "task" as
argument given that it actually operates on a struct gtask rather
than a struct task, and
- let subr_gtaskqueue.c consistently use __func__ to print functions
names.
Reported by: mmel
Reviewed by: mmel
Differential Revision: https://reviews.freebsd.org/D19139
Gratuitous ARP packets are sent from a timer, which means we don't have a vnet
context set. As a result we panic trying to send the packet.
Set the vnet context based on the interface associated with the interface
address.
To reproduce:
sysctl net.link.ether.inet.garp_rexmit_count=2
ifconfig vtnet1 10.0.0.1/24 up
PR: 235699
Reviewed by: vangyzen@
MFC after: 1 week
o Correct the obvious bugs in the netmap(4) parts:
- No longer check for the existence of DMA maps as bus_dma(9)
is used unconditionally in iflib(4) since r341095.
- Supply the correct DMA tag and map pairs to bus_dma(9)
functions (see also the commit message of r343753).
- In iflib_netmap_timer_adjust(), add synchronization of the
TX descriptors before calling the ift_txd_credits_update
method as the latter evaluates the TX descriptors possibly
updated by the MAC.
- In _task_fn_tx(), wrap the netmap(4)-specific bits in
#ifdef DEV_NETMAP just as done in _task_fn_admin() and
_task_fn_rx() respectively.
o In iflib_fast_intr_rxtx(), synchronize the TX rather than
the RX descriptors before calling the ift_txd_credits_update
method (see also above).
o There's no need to synchronize an RX buffer that is going to
be recycled in iflib_rxd_pkt_get(), yet; it's sufficient to
do that as late as passing RX buffers to the MAC via the
ift_rxd_refill method. Hence, combine that synchronization
with the synchronization of new buffers into a common spot
in _iflib_fl_refill().
o There's no need to synchronize the RX descriptors of a free
list in preparation of the MAC updating their statuses with
every invocation of rxd_frag_to_sd(); it's enough to do this
once before handing control over to the MAC, i. e. before
calling ift_rxd_flush method in _iflib_fl_refill(), which
already performs the necessary synchronization.
o Given that the ift_rxd_available method evaluates the RX
descriptors which possibly have been altered by the MAC,
synchronize as appropriate beforehand. Most notably this
is now done in iflib_rxd_avail(), which in turn means that
we don't need to issue the same synchronization yet again
before calling the ift_rxd_pkt_get method in iflib_rxeof().
o In iflib_txd_db_check(), synchronize the TX descriptors
before handing them over to the MAC for transmission via
the ift_txd_flush method.
o In iflib_encap(), move the TX buffer synchronization after
the invocation of the ift_txd_encap() method. If the MAC
driver fails to encapsulate the packet and we retry with
a defragmented mbuf chain or finally fail, the cycles for
TX buffer synchronization have been wasted. Synchronizing
afterwards matches what non-iflib(4) drivers typically do
and is sufficient as the MAC will not actually start with
the transmission before - in this case - the ift_txd_flush
method is called.
Moreover, for the latter reason the synchronization of the
TX descriptors in iflib_encap() can go as it's enough to
synchronize them before passing control over to the MAC by
issuing the ift_txd_flush() method (see above).
o In iflib_txq_can_drain(), only synchronize TX descriptors
if the ift_txd_credits_update method accessing these is
actually called.
Differential Revision: https://reviews.freebsd.org/D19081
[ARM] Make PerformSHLSimplify add nodes to the DAG worklist correctly.
Intentionally excluding nodes from the DAGCombine worklist is likely
to lead to weird optimizations and infinite loops, so it's generally
a bad idea.
To avoid the infinite loops, fix DAGCombine to use the
isDesirableToCommuteWithShift target hook before performing the
transforms in question, and implement the target hook in the ARM
backend disable the transforms in question.
Fixes https://bugs.llvm.org/show_bug.cgi?id=38530 . (I don't have a
reduced testcase for that bug. But we should have sufficient test
coverage for PerformSHLSimplify given that we're not playing weird
tricks with the worklist. I can try to bugpoint it if necessary,
though.)
Differential Revision: https://reviews.llvm.org/D50667
This should fix a possible hang when compiling sys/dev/nxge/if_nxge.c
(which exists now only in the stable/11 branch) for arm.
At moea64_sync_icache(), when the 'va' argument has page size
alignment, round_page() will return the same value as 'va'.
This would cause 'len' to be 0 and thus an infinite loop.
With this change, 'lim' will always point to the next page boundary.
This issue occurred especially during debugging sessions, when a breakpoint
was placed on an exact page-aligned offset, for instance.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D19149
option.
This issue was found by running syzkaller on OpenBSD.
Greg Steuck made me aware that the problem might also exist on FreeBSD.
Reported by: Greg Steuck
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D18834
As a followup to r343673, unsign some variables related to allocation
since the hashsize cannot be negative. This gives a bit more space to
handle bigger allocations and avoid some implicit casting.
While here also unsign uh_hashmask, it makes little sense to keep that
signed.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19148
This will allow upstream consumers, e.g., capsicum-test and third-party
packages (via ports(7)), to test for a specific `__FreeBSD_version__` and
expect `renameat(2)` to be functional.
PR: 222258
Approved by: emaste (mentor)
Reviewed by: emaste
MFC with: r343891
Differential Revision: https://reviews.freebsd.org/D19154
The logic added in r343287 to avoid false-positive
sum-of-child-bandwidth check errors for HFSC queues has a bug in it
that causes the upperlimit service curve of an HFSC queue to be pulled
down to its parent's linkshare service curve if it happens to be above
it.
Upon further inspection/reflection, this generic
sum-of-child-bandwidths check does not need to be fixed for HFSC - it
needs to be skipped. For HFSC, the equivalent check is to ensure the
sum of child linkshare service curves are at or below the parent's
linkshare service curve, and this check is already being performed by
eval_pfqueue_hfsc().
This commit reverts the affected parts of r343287 and adds new logic
to skip the generic sum-of-child-bandwidths check for HFSC.
MFC after: 1 day
Sponsored by: RG Nets
Differential Revision: https://reviews.freebsd.org/D19124
In `probedone()`, for the `PROBE_REPORT_LUNS` case, all paths that
fall to the bottom of the case set `lp` to `NULL`, so the test for a
non-NULL value of `lp` and call to `free()` if true is dead code as
the test can never be true. Fix by eliminating the whole if
statement. To guard against a possible future change that accidentally
violates this assumption, use a `KASSERT()` to catch if `lp` is
non-NULL.
Reviewed by: cem
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D19109
This code allocated a correctly sized buffer, read past the end of the
source buffer, writing off the end of the target buffer, and then writing
a '\0' terminator past the end of the target buffer (in the wrong place).
It then leaked the buffer.
Switch to a statically sized buffer on the stack and update the source
pointer and
length before use so the correct things are copied.
Fix a logic error in the checks that the format of the line is as
expected and move on out of an assert.
Remove an unneeded close(). fclose() closes the descriptor.
Found with: CheriABI
Obtained from: CheriBSD
Reviewed by: kib, jhb, markj
Differential Revision: https://reviews.freebsd.org/D19122
When pci_realloc_bars was first added, the intention was to eventually
enable it by default, but it was left disabled to preserve existing
behavior. The setting is pretty conservative in that it does not
attempt to allocate resources for BARs that the BIOS/firmware leaves
disabled. It only attempts to reallocate resources for a BAR that the
firmware programmed during boot but that conflicts with another
resource during the kernel's device scan.
PR 221350 is an example of a machine that this knob fixes.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D18965
Initially it was introduced because parent rule pointer could be freed,
and rule's information could become inaccessible. In r341471 this was
changed. And now we don't need this information, and also it can become
stale. E.g. rule can be moved from one set to another. This can lead
to parent's set and state's set will not match. In this case it is
possible that static rule will be freed, but dynamic state will not.
This can happen when `ipfw delete set N` command is used to delete
rules, that were moved to another set.
To fix the problem we will use the set number from parent rule.
Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC
Without this fix, the usage of kernel coverage would lockup the system.
Thanks to Andrew for suggesting the final form of the fix.
PR: 235611
Reviewed by: andrew@, emaste@
Differential Revision: https://reviews.freebsd.org/D19135
battery charging, charge state, voltage, charging current, discharging current,
battery capacity etc. can be obtained via sysctl.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D19145
The hardcoded ident is exactly 20 bytes long but sprintf adds terminating zero,
so there is one byte written out of array bounds.As a fix use strncpy it
appends \0 only if space allows and its behavior matches virtio spec:
When VIRTIO_BLK_T_GET_ID is issued, the device identifier, up to 20 bytes, is
written to the buffer. The identifier should be interpreted as an ascii string.
It is terminated with \0, unless it is exactly 20 bytes long.
PR: 202298
Reviewed by: br
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18852
In general, the time savings come from separating the active and
inactive queues lists into separate interface and non-interface queue
lists, and changing the rule and queue tag management from list-based
to hash-bashed.
In HFSC, a linear scan of the class table during each queue destroy
was also eliminated.
There are now two new tunables to control the hash size used for each
tag set (default for each is 128):
net.pf.queue_tag_hashsize
net.pf.rule_tag_hashsize
Reviewed by: kp
MFC after: 1 week
Sponsored by: RG Nets
Differential Revision: https://reviews.freebsd.org/D19131
